Problem disconnecting speakers from Macbook Pro

I paired my Bose Mini Bluetooth Speakers with my laptop about a week ago now and they've been working fine, but yesterday I went to the Apple Store because of a bad problem with lagging on my laptop. Long story short, we had to completely erase my laptop and set it back up from scratch, but now my speakers won't play. When I go into the Bluetooth section of System Preferences the speakers don't show up, but when I click on the little Bluetooth icon at the top of the screen next to WiFi/Battery/etc, they do show up. They come up as being connected to my laptop, and no matter how many times I try, they won't disconnect for me to start again. Any ideas on how to fix this?

I'm not sure, but it might be related to the graphics card. If you are seeing line or glitches in the graphics, or experiencing white or black screens on start up then it's worth checking out the gpu/logic board set up. Recommend this site, if in fact the gpu is the problem:
https://people.cam.cornell.edu/~zc227/extras/early2011mbp_graphics.html

Similar Messages

Problems transferring data from MacBook Pro to MacBook Pro

I just bought a new MacBook Pro and I am having problems transferring data from my old MacBook Pro. I am using an Apple Thunderbolt to FW adapter to hook both computers and I am using the Migration Assistant. Everything looked ok until the "Transferring Your Information" screen got stuck. It says that it is "Transferring your Application folder..." And it has been stuck for at least the last two hours giving a message that says "About 3 minutes remaining..." This is starting to get ridiculously annoying. Options?

I guess I am finding my own way as time progresses and frustration increases but these are two things that I have found so far:
1. Transfering from one machine to another does not seem to be the most efficient way to do this so using the TimeMachine backup must be the way to go...
HOWEVER
2. In this process I also found another "complication" called: Legacy FaultVault - My computer is encripted and I used this now so called "Legacy FaultVault" app to do it (when it was no a Legacy!). The thing is that you can not transfer documents from your TimeMachine backup to your new Mac if the Legacy Fault Valut is active on your old machine so you first need to desactivate the encription. HOWEVER, this brought another issue...when I tried to desactivate the encription using the Legacy FaultVault screen I got a message saying that I did not have enough disk space to allow me to do that....Isn't that great??? This is a problem by itself and it seems to have some sort of solution I was reading about (not straight forward at all). What I am trying to do now is to copy the folder that contains my files and just paste them on my new machine to see if that works....it looks like my apps are on my new machine, unsure if they are working...need to test this next....
I guess the transfer machine to machine could have sorted out the conflict eventually...after tens of hours or maybe not! Who knows....
A very frustrated Apple fan...
I love Apple products but this is an ISSUE...I feel like there is lack of adecuate documentation around to deal with this or the data transfering apps should be able to deal with this on a more efficient way....just saying...

Has anyone else had problems scanning to their MacBook Pro from a Brother MFC device?

Has anyone else had problems scanning to their MacBook Pro from a Brother device?

Refer to http://support.apple.com/kb/HT3669. Check if Printer is listed and can function to Print and Scan.
Check if the computer can detect the Brother Device as a scanner. go to Applications and open up Image Capture. If it is not detected, contact Brother support

I tried to remove Trovi from macbook pro but it doesnt go away

I tried to remove Trovi from macbook pro but it does not go away. Trovi opens right away

How to remove Trovi adware from Mac - MacSecurity
Helpful Links Regarding Malware Problems
If you are having an immediate problem with ads popping up see The Safe Mac » Adware Removal Guide and AdwareMedic.
Open Safari, select Preferences from the Safari menu. Click on Extensions icon in the toolbar. Disable all Extensions. If this stops your problem, then re-enable them one by one until the problem returns. Now remove that extension as it is causing the problem.
The following comes from user stevejobsfan0123. I have made minor changes to adapt to this presentation.
Fix Some Browser Pop-ups That Take Over Safari.
Common pop-ups include a message saying the government has seized your computer and you must pay to have it released (often called "Moneypak"), or a phony message saying that your computer has been infected, and you need to call a tech support number (sometimes claiming to be Apple) to get it resolved. First, understand that these pop-ups are not caused by a virus and your computer has not been affected. This "hijack" is limited to your web browser. Also understand that these messages are scams, so do not pay any money, call the listed number, or provide any personal information. This article will outline the solution to dismiss the pop-up.
Quit Safari
Usually, these pop-ups will not go away by either clicking "OK" or "Cancel." Furthermore, several menus in the menu bar may become disabled and show in gray, including the option to quit Safari. You will likely have to force quit Safari. To do this, press Command + option + esc, select Safari, and press Force Quit.
Relaunch Safari
If you relaunch Safari, the page will reopen. To prevent this from happening, hold down the 'Shift' key while opening Safari. This will prevent windows from the last time Safari was running from reopening.
This will not work in all cases. The shift key must be held at the right time, and in some cases, even if done correctly, the window reappears. In these circumstances, after force quitting Safari, turn off Wi-Fi or disconnect Ethernet, depending on how you connect to the Internet. Then relaunch Safari normally. It will try to reload the malicious webpage, but without a connection, it won't be able to. Navigate away from that page by entering a different URL, i.e. www.apple.com, and trying to load it. Now you can reconnect to the Internet, and the page you entered will appear rather than the malicious one.
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
OS X Mavericks- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using ClamXAV. (Thank you to Thomas Reed for this recommendation.)
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect everything targeting the Mac.
3. The very best way to prevent the most attacks is for you as the user to be aware that
     the most successful malware attacks rely on very sophisticated social engineering
     techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
    your computer is intended to entice you to install their malware thinking it is a
    protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
    from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
    you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware.

I am having a problem with my 2009 Macbook Pro

Hello Everyone,
I am having a problem with my 2009 Macbook Pro . A few weeks ago I plugged it into the charger after running it down to reserve battery power. It appeared to be charging, but then all of a sudden my clock and calender reset to year 2000 and then my computer blacked out and went dead. I tried to boot it up but nothing happened (literally nothing). I have tried 3 different chargers on it, but all I get is a faint green light and even after hours it still won't boot up. I have tried replacing the battery, but still nothing happens.
Any Ideas? I am pretty desperate to get my computer back up and running before school finals.

You may have to see if an authorized Apple service specialist can check over
the charging system (magsafe dc-in board, power adapter, and MacBook/Pro)
and test or run a diagnostic on it, to be sure there is no damage or failed parts.
When you attached the adapter to charge the computer, after it said it was going
to reserve power, did you shut down open applications and stop using the MB/Pro?
That would've been the thing to do, since the margin of run-time near the bottom
of the power cycle can be wrong by the gauge estimate, it can just quit.
While I have not researched your year/model/series in detail, I do know some
models of Apple portable computers have a small battery or capacitor on the
logic board, separate from the main power battery; it may need replacement.
A service provider w/ Apple training & parts would be a likely resource to fix it.
Good luck & happy computing!

New problem with display on Macbook Pro retina (Samsung panel)

Hello All,
I am a very new people on your forum but a few weeks ago i bought a new macbook pro retina with samsung panel.
I haven't ghosting effect on my macbook but i have a new and really bad problem.
I try to found a some information on Russians forums but nobody can help me with it.
I can see an artifacts in the form of flashing pixels on all display.
It occurs in 20-30 minutes after the start of work.
Today i try to test it on game Dirt 2 and i can see defects after 2 minutes after start. So i think it can be reason with Geforce 650 but when i back to desktop and use HD 4000 i still see a problem.
This is best seen on a black screen with high backlight.
When i try to connect TV via HDMI i can't see any problem in my TV.
So i really don't know what could be the reason.
I attached the video with issue to video hosting
http://vimple.ru/579f880e8b7045e09f8fc5bc097c5e2b
Also i have a many software problem like Crashing safari and iTunes. It can be a few times per day.
I really disappointed with my new Macbook.
I haven't any problem with old 2009 Macbook pro with Snow Leopard but Mountain Lion is not working well.

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Transfer video from macbook pro to iPhone iOS 8

how to transfer video from macbook pro to iphone 5S IOS 8, anyone?

Hi hjmdsalleh,
You typically use iTunes to sync your content to your iPhone.
iOS: Syncing your data with iTunes
If you are having problems syncing some videos, they may not be in the correct format.
iTunes: Videos may be unable to sync to iPhone, iPad, or iPod
Take care,
Nubz

How to sync contacts and calendar from macbook pro to ipad 2?

How do I sync contacts and calendar from macbook pro to ipad2?

I have the same problem and have not been able to get contacts transferred from my MacBook Pro to my iPad 2. I have checked "sync contacts", when it does the sync it says it is syncing contacts, but the address book on the iPad remains empty. I tried checking the box under "advanced" that says to replace the contacts information on the iPad, sync again, same result—an empty address book on the iPad. Any suggestions?

Printing from Macbook Pro to HP Photosmart Plus B210a

Hi,
I am experiencing difficulty in printing documents from Macbook Pro to HP Photosmart Plus B210a. This has only been a problem for the last 2 weeks.
I think this may be due the most recent update of OS X Mavericks 10.9.3.
I have tried to update printer drivers from HP web, and it indicates that the printer in connected to my network router, and I have been able to run a testprint to the printer.
However when I try to print any documents the print queue seems to be trying to print, but never actually generates an output document.
I am looking for any advice/guidance on how to solve this printing problem.

Hi Eric,
i note that 10.9.4 is Mavericks.I cannot link directly as it is a wireless printer.
I have tried using the Terminal app, and typed the command as you indicated and i got the response attached.
IAIN-HERCUSs-MacBook-Pro:~ iain1$ ping 192.168.1.69
PING 192.168.1.69 (192.168.1.69): 56 data bytes
64 bytes from 192.168.1.69: icmp_seq=0 ttl=255 time=6.941 ms
64 bytes from 192.168.1.69: icmp_seq=1 ttl=255 time=5.657 ms
64 bytes from 192.168.1.69: icmp_seq=2 ttl=255 time=3.769 ms
64 bytes from 192.168.1.69: icmp_seq=3 ttl=255 time=4.136 ms
64 bytes from 192.168.1.69: icmp_seq=4 ttl=255 time=4.226 ms
64 bytes from 192.168.1.69: icmp_seq=5 ttl=255 time=4.219 ms
64 bytes from 192.168.1.69: icmp_seq=6 ttl=255 time=4.699 ms
64 bytes from 192.168.1.69: icmp_seq=7 ttl=255 time=6.325 ms
64 bytes from 192.168.1.69: icmp_seq=8 ttl=255 time=4.570 ms
64 bytes from 192.168.1.69: icmp_seq=9 ttl=255 time=4.493 ms
I found that had to break this process. i don't know what this tells you with regard to the status of the printer connection.
Please let me know what I should do next?
IDH1

Migrated from macbook Pro to latest macbook pro (10.9.5) - Error 16 and more

Migrated from macbook Pro to latest macbook pro (10.9.5) - Error 16 when starting up any CS6 app. Fixed permssions but problem persists. Re-installed apps, same issue PLUS cannot locate installations - only way to launch is from the end frame on the Installer? Search finds no evidence of any apps

Hi Stevel,
Refer to below document in-order to resolve Configuration error 16.
Configuration error 16 | CC, CS

Help get rid of Bing search engine from macbook pro os 10.7.5

Help me get rid of Bing search engine from macbook pro os 10.7.5
fmartn67

You installed the "Genieo/InstallMac" rootkit. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the tedious procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the rootkit (as long as you never reinstall it.)
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data. You must know how to restore from a backup even if the system becomes unbootable. If you don't know how to do that, or if you don't have any backups, stop here and ask for guidance.
Step 1
In the Applications folder, there may (or may not) be an application named "Genieo". Genieo may be partially installed even if this item is absent. If it's present, select it and open the Finder Info window. If it shows that the Version is less than 2.0, download and install the current version from the genieo.com website. This may seem paradoxical, since the goal is to remove it, but you'll be saving yourself some trouble as well as the risk of putting the system in an unusable state.
There should be another application in the same folder named "Uninstall Genieo". After updating Genieo, if necessary, launch "Uninstall Genieo" and follow the prompts to remove the "newspaper-style home page." Restart the computer.
This step does not completely inactivate Genieo.
Step 2
Don't take this step unless you completed Step 1, including the restart, without any error messages. If you didn't find the Genieo application, or if you couldn't complete Step 1 for any reason, stop here and ask for instructions.
Triple-click anywhere in the line below on this page to select it:
/Library/Frameworks/GenieoExtra.framework
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.
If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password. Move each of these items to the Trash in the same way:
/Library/LaunchAgents/com.genieo.completer.update.plist
/Library/LaunchAgents/com.genieo.engine.plist
/Library/LaunchAgents/com.genieoinnovation.macextension.plist
/Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
/Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
/usr/lib/libgenkit.dylib
/usr/lib/libgenkitsa.dylib
/usr/lib/libimckit.dylib
/usr/lib/libimckitsa.dylib
~/Library/Application Support/com.genieoinnovation.Installer
~/Library/LaunchAgents/com.genieo.completer.download.plist
~/Library/LaunchAgents/com.genieo.completer.update.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. There's no need to restart after each one. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
Step 3
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
Make sure you don't repeat the mistake that led you to install this software. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Genieo developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
Finally, be forewarned that when Genieo is mentioned on this site, the perpetrator of the scam sometimes shows up under the name "Genieo support." He will tell you to run the provided uninstaller, while lying about what it does. As he knows and intends, the uninstaller does not completely remove the malware.

HT1338 I cannot print wirelessly from Macbook Pro: this is the error message I receive /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII failed. can anyone help. I have been able to print on this printer for

I cannot print wirelessly from Macbook Pro: this is the error message I receive /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII failed. Can anyone help. I have been able to print on this printer for months, then yesturday out of the blue I get this error.

"/Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII failed"
I also saw this same error message above the Print Queue, ever since allowing the Epson Printer Software Update (August 2013) to install. After this update installed, I was able to print a basic Test Page from the Print Queue, but when printing from any application I only got "Looking for printer..." displayed above the Print Queue, which would stall and never print.
2008 MacBook, 10.7.5. It used to print to my Epson WorkForce 845 wirelessly without problems, before this software update was installed.
Changing the driver from "Epson WorkForce 845" to "Epson WorkForce 600 - Gutenprint v5.2.3" was a workaround that did allow me to print, but I wasn't satisfied with that.
Found this better solution in https://discussions.apple.com/thread/5233149?start=0&tstart=0
(with thanks to Yuengdog1983):
This issue may be a result of the Computer Name being left empty:
Open System Preferences and choose Sharing.
Enter a name for your computer.
Even without restarting the MacBook, I was able to now change back to using the Epson WorkForce 845 driver v9.0 successfully. I never would have guessed that a Computer Name is required in order to print!

Xerox 8560DN pauses when printing from MacBook Pro (Maverick update)

Xerox 8560DN pauses when printing from MacBook Pro using the printer connected to a Windows XP machine. The printer is fully shared, however when I print, it goes to PAUSE. It displays...Ready to print > Printing > and it pauses.
The Maverick update has changed lots of unecessary setups. What was perfectly working before, not it causes problems.
Any solution?

Carolyn Samit,
I did it several times without any success. I think that the Maverick update damaged something.
I also deleted, added and change all settings... Not working. Xerox does not have a Maverick driver available, but today apple released a Xerox printer software update (Version 2.3). After the installation, nothing changed.

Cannot transfer files from macbook pro running os 10.6 to macbook pro running 10.8

having trouble transferring files from macbook pro running os 10.6.7 to macbook pro running os 10.8. getting message to up grade migration assistant but cannot find upgrade

The latest version of Migration Assistant is version 5 and should have been installed in you Utilities folder when you upgraded to version 10.8. Use the 10.8 version machine to migrate to and you should have no problems.
Clinton

Can not set up messages to send from Macbook Pro to Ipad

Hello everyone,
I am having trouble sending from MacBook pro Messages to Ipad. If I send a message from Ipad, it shows up in Macbook, however if I try to send from Macbook, it tells me "Your message could not be sent. Your message account is not signed in " SO I press sign in and a dialoque window pops up and I can see that I am actually signed in with my apple ID, and the acount is enabled. However it also shows that "Messages Inactive" and when I go to Messages menue, I can not even change my status.
I have checked the firewall, its off. Please enlighten me, I am starting to feel like I am loosing it with technology

I am having the same problem. Sometimes it works and sometimes it doesn't. I called apple restored my phone to its original and it did not work :-( Now it seems like it worked for a bit than stopped again. Now I have to contact Apple again to set up an appointment at an Apple store because it may be an issue with my phone. I have only had it for a week and half!

Problem disconnecting speakers from Macbook Pro

Similar Messages

Maybe you are looking for