Problem Display BSP for Appraisals

Good Night.
I want display the layout of the pages BSP for the module of Objective and Setting Appraisals.
I found the following information with some steps for :
To find out, which links you need to enter the Web pages, enter the Web Application Builder (SE80). In the Repository Browser search for package PAOC_HAP_DOCUMENT_UI, and follow the path Web Objects>BSP Applications>HAP Document-->Pages with flow logic.
Double-click on the page you want to access. On the right side of the screen, go to the Properties tab
page.
BSPu2019s can be started also directly from the SAP System via transaction phap_start_bsp. This
transaction can also be used to see the parameters and to build up the link which you can copy for use in
your portal iview.
However , the pages no display none information or layout.
I need help . How can display the layout of this page before the portal.??????
Kind Regards.

Hi everyone,
I've run into a problem while testing with PHAP_START_BSP and wondered if anyone has seen this issue. I am testing in the sandbox on a recently created userID that I assigned to a pernr I created. When I test with page Documents_todo.htm, I can see the test template I released. 3 other of my teammates can see it as well. However, when I use a test ID that isn't from my team the template does not display. What is really confusing to me is we even copied my ID identically and assigned it to the pernr I was using and that test ID still couldn't view the template. But when I took my ID that was working and assigned it to a random pernr it still worked. Has anyone seen this or know of what else I could look at? I've worked with our security team and the auths on SU01 and structural auths appear to be the same.
Thanks,
Eric

Similar Messages

Display BSP for Appraisals

Good Night.
I want display the layout of the pages BSP for the module of Objective and Setting Appraisals.
I found the following information with some steps for :
To find out, which links you need to enter the Web pages, enter the Web Application Builder (SE80). In the Repository Browser search for package PAOC_HAP_DOCUMENT_UI, and follow the path Web Objects>BSP Applications>HAP Document-->Pages with flow logic.
Double-click on the page you want to access. On the right side of the screen, go to the Properties tab
page.
BSPu2019s can be started also directly from the SAP System via transaction phap_start_bsp. This
transaction can also be used to see the parameters and to build up the link which you can copy for use in
your portal iview.
However , the pages no display none information or layout.
I need help . How can display the layout of this page before the portal.??????
Kind Regards.

Hi,
Select your appraisal template in PHAP_Catalog_PA-> right click->Go to Preview->Select web layout.
Best Regards,
Cheatn S.Wahane

ESS Webservice for Appraisals

Hi ESS Experts:
I have got two IAC Iviews created -- MY_APPRAISALS and MY_APPRAISALM on EP.
MY_APPRAISALS worked well as it just displays the completed appraisals but when i accesed the MY_APPRAISALM service on EP it says the service not found. And then later i have learnt that this service is not available in ITS Directory in R/3.
And alternatively, i have used PP_MY_APP_MGT as an ITS Service on ESS but when i create an appraisal using this service....i donot see any buttons like-- Define Objectives, SAVE, End Preperation in the Screen.
Am i missing anything here.
And what is Publishing the Service on Web Server using W3_PUBLISH_SERVICES.
Experts please provide some hints..
regards,
Srikanth

Hi Srikanth,
If i understand you correctly, you have a portal system and want to publish the appraisal in that.
You need to create iView of type BSP if you are in EP7 or general URL iView if you are in EP6.
In the URL parameter, you need to get the URL from the backend SAP system. the corresponding BSP application in the backend is HAP_DOCUMENT. There are many pages available in that BSP and the one to be used for managers is 'documents_todo.htm' and the one for employee is "documents_received.htm".
Get the URL from the property of the page and use this in the portal iView.
Hope this helps you.
Regards,
Subbu

Problem with GarageBand for iOS 6/7 Iphone 3gs / 4

Problem with GarageBand for iOS 6/7 Iphone 3gs / 4
Hello,
On February 16, bought the GarageBand for iOS which was free and so I find and install it on my 3GS .
Take the demo: Curtain Call Demo
and within the instruments :
audio Recorder
Sampler
Smart Drums
Smart Strings
Smart Bass
Smart Keyboard
Smart Guitar
Keyboard
Drums
Guitar Amp
1.4.1 is the latest version for ios 6.
Configure my AppleID on a Iphone 4 and install the program , the version I have the Iphone 4 is the orange ( different from 3gs ) icon and put it on the AppStore : ios 2.0.1 for ios7.
With these instruments :
audio Recorder
Sampler ( to download the instrument )
Smart Drums ( to download the instrument )
Smart Strings (Download the instrument )
Smart Bass ( to download the instrument )
Smart Keyboard ( to download the instrument )
Smart Guitar
Keyboard
Drums
Guitar Amp ( to download the instrument )
and if I give what I need to restore tells me if I bought it I did not restore anything and tells me to buy :
Complete collection of GarageBand instruments and sound at a price of : € 4.49
As they are 2 different versions ? More than anything I say because I have to pay for the instruments in the 2.0.1 version of the Iphone 4 ... ?
And besides not wearing demo Demo Curtain Call : (
GarageBand 1.x If you are upgrading it using iTunes on a Mac or PC, you can restore the original collection of instruments and sounds. There is no need to buy this collection. Press "You've already purchased?" When displayed on iPhone, iPad or iPod touch.
this puts on the AppStore but I have tried to restore as I wrote above, and does not work. There is nothing to restore.
regards

I've been having the same problem. However, I believe my problem is due to the 3G issues I've been having. I don't have internet access even when the 3G symbol appears, so probably my iphone keeps trying to connect to the network and has its battery drained! Have you been having the same issue?

Problem displaying CLOB in text file

Hello All,
I have a problem displaying the content from the database in notepad. When I click on a link on my jsf screen, I retrieve the data and display it in notepad.
I have my text content stored in the database with CLOB datatype. When I look in the database the data looks in the following format:
---------STARTS FROM NEXT LINE-------------
The firm, known for its keen oversight of products, has been the subject of complaints from firms who have had apps blocked from the store. Some developers have complained that the company's rules seem inconsistent.
Some have found apps blocked after seemingly minor updates, or for having content deemed inappropriate by them. In light of this, and after careful consideration, I believe it is unnecessary to sign this measure at this time.
Sincerely,
ABC
----------ENDS IN THE PREVIOUS LINE------------
Now when I display this content onto the notepad, all the spaces and new line characters are lost, and the entire display looks awkward. This is how it looks:
The firm, known for its keen oversight of products, has been the subject of complaints from firms who have had apps blocked from the store. Some developers have complained that the company's rules seem inconsistent.[]Some have found apps blocked after seemingly minor updates, or for having content deemed inappropriate by them. In light of this, and after careful consideration, I believe it is unnecessary to sign this measure at this time.[]Sincerely,[]ABC
All the new line characters are lost and it just puts some junk character in place of a new line.
When I copy the same text onto textpad, everything is alright and it displays exactly the way it is present in the database. I am also open to display the content in html, but in HTML it doesn't even display me the junk character in place of new line. It is just one single string without any line separators.
I am using the following code to put the content into the text.
public String writeMessage(){
   OutputStream outStream = null;
   HttpServletResponse response = getServletResponseFromFacesContext();
   Reader data = null;
   Writer writer = null;
   try{
      response.reset();
      response.setContentType("text/plain; charset=UTF-8");
      response.setHeader("Content-Disposition","attachment; filename="+id+"_Message.txt");
      outStream = response.getOutputStream();
      QueryRemote remote = serviceLocator.getQueriessEJB();
      data = remote.retrieveGovernorsVetoMessage(billId);
      writer = new BufferedWriter(new OutputStreamWriter( outStream, "UTF-8" ) );
      int charsRead;
      char[] cbuf = new char[1024];
      while ((charsRead = data.read(cbuf)) != -1) {
         System.out.println(charsRead);
      writer.write(cbuf, 0, charsRead);
      writer.flush();
   }catch(Exception ex){
      ex.printStackTrace();
   }finally{
      //Close outStream, data, writer
      facesContext.responseComplete();
   return null;
}Any help or hints on resolving this issue would be highly appreciated.
Thanks.

The data is imported from a third party application to my database. It doesn't display any newline characters when I view the data.
But when I do a regular expression search on text pad, I could see that my clob contains \n as the new line character. Is there a way to replace \n with \n\r while writing the data.
Thanks.

Problem: Adding support for non-english charachter sets in UCCX 8.0

We have just moved from windows-based UCCX 7.0 to UCCX 8.0, the upgrade process went successfully so far, but for some reasons, Cisco Agents are experiencing problems displaying non-english charachter sets, everything was working fine prior to upgrading to the new version.
Is there a way to add support for these character sets?
Thanks in advance.

Hi Bala,
Follow the command. I believe that the space is normal.
This command can take significantly long time,
and can also effect the system wide IOWAIT on your system.
Continue (y/n)?y
Filesystem            Size Used Avail Use% Mounted on
/dev/sda6              90G   46G   41G 54% /common
8.0K    /var/log/inactive/
admin:
admin:
admin:show diskusage activelog
This command can take significantly long time,
and can also effect the system wide IOWAIT on your system.
Continue (y/n)?y
Filesystem            Size Used Avail Use% Mounted on
/dev/sda6              90G   46G   41G 54% /common
8.0K    /var/log/active/mgetty
0       /var/log/active/sa
4.0K    /var/log/active/platform/snmp/sappagt/sappagt.index
4.0K    /var/log/active/platform/snmp/sappagt/sappagt.log
4.0K    /var/log/active/platform/snmp/sappagt/startup.txt
16K     /var/log/active/platform/snmp/sappagt
4.0K    /var/log/active/platform/snmp/hostagt/hostagt.index
Thanks,
Wilson

Best practice to upload data for Appraisals: BDC, LSMW or functional module

Hi,
I have heard that BDC and LSMW do not work for data upload in appraisals. Is it true?
Can we use ECATT or SECATT to upload data in appraisals?
I somewhere got the information that functional modules
HRHAP_DOCUMENT_PREPARE
HRHAP_DOC_UPDATE_BODY_AND_SAVE
HRHAP_DOCUMENT_CREATE
are used to upload the data for appraisals?
Many of my earlier clients found it very hectic to create appraisal templates every year (PHAP_CREATE). They needed something automated for this. I managed to suggest them manual upload or SECATT, but I am not sure if BDC/LSMW work for this.
Can somebody throw some light on this?
Best regards,
Veera Sasidhar Jangam

Hi,
You need to write a code for same and use function modules available as those does direct updates to database.
If client is not bothered about look and feel during dataload or do not care about display infotypes during data updates then use above method otherwise BDC needs to be written with screen control programming in it.
Thanks,
Ameet

Up-to-date Display Driver for Dv6-3077CA?

I recently bought an HP Dv6-3077CA (Intel Core i5 2.26GHz, 4GB DDR3 ram and 1GB ATI Radeon HD 5650)and was looking to play some Starcraft II the other day when I noticed that many of the Graphics options were grayed out and unchangeable.
My first step towards fixing this was checking the Blizzard website for info and noticed that the required display drivers for Starcraft II to even detect my graphics card were the ATI Mobility Catalyst Drivers version 10.2. I then proceeded to find my current version and discovered I was running 10.1.
Now my next step was the obvious one of going to the ATI website and downloading the Mobility Catalyst Drivers for my Graphics Card which I did but could not install. I recieved an error message from the Software installer that I had software on my computer interfering with the installation and that I needed to get the Drivers from the manufacturer's website. So of course I came to the HP website and located the download for my Drivers and went through the download and install process.
Nothing went wrong during this step, but upon rechecking my Driver Version I saw that it had not changed at all! I was still only running 10.1. So my questions are the following :
Did I have the incorrect Drivers by any chance?
Is there a way for me to safely get the Drivers from the ATI website?
And if the answer is no for the above questions, When will HP release the proper up-to-date Drivers for my Mobility Radeon 5650?
Thanks in advance for the help resolving this issue. I am hoping you can provide an answer soon.

I appologize about you not getting a response untill now.
Your drivers are correct and the latest it just seems that a newer HP driver has not been released for this particular product. Even though it is not supported by HP you can uninstall the display driver currently installed and try the ATI ones to resolve your issue. I don't have a dv6-3000 to test your exact issue on but I did try Catalyst 10.9 on an Envy 14 w/ the Radeon HD 5650 graphics card. It did install and function correctly.
Good luck to ya!
I am an HP employee.
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.

Payment Block field in invoice displays 'Free for payment 'even though ?

Hi,
We have set necessary upper tolerance limit for Price & Quantity variance in OMR6.This should block invoice for payment in case if this limit is crossed and payment block field in invoice should display "R Invoice verification".
In our case if material is having standard price then we are getting desired results in both the cases of Quantity variance and price variance . However in case of material with moving average price it works fine in quantity variance but not for price variance(Here invoice gets blocked for payment but payment block field displays "free for payment").What can be probable reason for this?
Material ledger is activated in our case.
Thanks in advance,
Sanjog

Hi,
Currently, we are also facing the same problem.
The payment term are not getting populated after posting the invoice.
Could you please help to overcome the issue.
Thank you.
Warm Regards,
Kalyani

Problem displaying picture stored in mySQL

Hi, i just have got problem displaying picture stored in database as BLOB and presented on JSP over servlet. Below is my code i am using to upload file into database, than download it and display again. The result is the picture can not draw inself and there is always only empty picture space on the web page i am displaying. Please help me to find why it is not working, thanx.
servlet uploading picture to database
               boolean isMultipart = FileUpload.isMultipartContent(req);
               DiskFileUpload upload = new DiskFileUpload();
               List items = upload.parseRequest(req);
               Hashtable textFields = new Hashtable();
               byte[] data = new byte[4096];
               if(isMultipart)
                    Iterator iter = items.iterator();
                    while(iter.hasNext())
                         FileItem item = (FileItem)iter.next();
                         if(item.isFormField())
                              textFields.put(item.getFieldName(), item.getString());
                         }else{
                              data = item.get();
               String sqlStatement = "INSERT INTO cds VALUES('" textFields.get("id")"'," +
                                        "'" textFields.get("album") "','" textFields.get("interpreter") "'," +
                                                  "'" textFields.get("gr1") "','" textFields.get("gr2") "','" textFields.get("price") "')";
               String sqlStatement2 = "INSERT INTO pics VALUES('" textFields.get("id") "','" data "')";
servlet to download picture
String SQL =
     "SELECT Picture " +
     "FROM pics " +
     "WHERE id = '" + request.getParameter("id") + "'";
     ResultSet rs = stmt.executeQuery(SQL);
     rs.next();
     Blob blob = null;
     blob = rs.getBlob(1);
     response.setContentType("image/jpg");
     request.setAttribute("blob", blob);
     System.out.println("just above OutputStream");
     InputStream in = blob.getBinaryStream();
     ServletOutputStream sout = response.getOutputStream();
     int b;
     while ((b = in.read()) != -1) {
     sout.write(b);
     in.close();
     sout.flush();
     sout.close();
img tag in JSP
<img src="LoadImageServlet?id=some id>
plus i am using
Tomcat 5.0
mySQL 4.0
debuging in eclipse
thanx for help once more, Libor.

1:
are there any exceptions throws by the jdbc code
2:
is the code in a doGet
3:
you should do a if(result.next())
4:
Is your mapping code working

Display Conditions for Configurator OptionFeature Options - R12.1

Here is a test scenario that I am using. This is for R12.1
1. I have a list of options under a Option feature
2. These options are to be displayed as drop down list in the configurator user interface as the min and max selections allowed is 1. i.e. options are mutually exclusive.
3. In configurator user interface, I have to display only the options that are available for user selection. i.e. Options that are either excluded by a rule of by an configurator extension, should not be displayed in the UI.
Now, here is the problem.
I am using the display condition for the drop down feature as below.
List Item Display Condition List Item Model Node.SelectionState IsNot Excluded
The above display condition removes the options that are excluded by a configurator rule (like logic rule or a CDL). But is does not remove the options from the list that are excluded by a configurator extension.
I tried with all different display condition approaches. But I was unsuccessful in not displaying both type of options that are exculded by configurator rule and configurator extension.
If anyone could help me achieve this, it would be of great help.
NOTE: The logical state of option excluded by configurator extension is either FALSE or UFALSE.
The logical state of option excluded by configurator rule is LFALSE.
Hope the above explaination is readable. Let me know if you have any questions.
Thanks,
user9356335

Hi Jason,
Thanks for your reply.
yes I have tried using LFALSE (as you have mentioned in your message - (IOption)opt.setState(IState.LFALSE); ).
But we cannot set the logical state of an option to LFALSE, LTRUE, UFALSE, UTRUE.
we can only set it to FALSE, TRUE or TOGGLE.
When I tried to set the state of the option to LFALSE, it throws an error saying - logical state of an option can only be set to FALSE, TRUE or TOGGLE.
- user9356335

Problems displaying in IE

While I love iWeb's ease of use, it seems to have serious problems displaying on IE. There is really no point blaming IE, since it is the dominant browser and most people who will see our sites will use it. The point of iWeb should be to allow people to communicate broadly and effectively, not just to Mac & Safari users.
Lists do not work well. The indents do not display properly. Text in boxes shift alignment and location. Bullets show up with different sizes. I have had to hand indent and line space all the lists in the sites I make, which is a mess and not scaleable.
See fieldsforkidsmamk.org.
Are there any workarounds or fixes?
The other obvious issues with iWeb are worth noting:
* inconsistent display in browsers -- pages look different in Safari and Firefox, even on the Mac (let alone IE)
* difficulty adding html code
* page names must be identical to nav names, so pages with multiple words (Get Involved) display urls as /Get%20Involved (can't be corrected unless you have Get_Involved as a header.)
* need to publish whole site for any change
* need to publish all sites for each change to any site
* can't change color, display, location, function etc for Nav
I assume everyone is aware of these problems. The question is, what to do? Grin and bear it? Any help, tips or ideas would be appreciated.
Thanks!
MacBook Mac OS X (10.4.8)
MacBook Mac OS X (10.4.8)
MacBook Mac OS X (10.4.8)
MacBook Mac OS X (10.4.8)

* page names must be identical to nav names, so pages
with multiple words (Get Involved) display urls as
/Get%20Involved (can't be corrected unless you have
Get_Involved as a header.)
You can fix this the same way you add html code, by post processing.
* need to publish all sites for each change to any
site
You can fix this by separating your sites into different Domain files so you only publish one at a time.
Contrary to the other response, "encoding" is not connected to the points you made. There is never any need to add a UTF-8 "tag" to an iWeb page. If you see question marks or Â's when your page is displayed on any browser, Mac or PC, then you may need to fix your ftp or server settings.

Cannot install latest display driver for Vista 32-bit Equium A200

Hi all,
I am trying to update my display driver to the latest revision posted for my model laptop on the Toshiba site but on running the setup exe Im returned with an error stating my system is not compatible with driver ver 7.14.10.1461.
In info clearly states it compatible with an A200 (PSAE2).
Anyone had a similar problem.

Hi!
On the Toshiba website I have founded only Intel display driver for your A200 PSAE2 so I think you have an Intel graphic card.
Well, I had this problem too and the solution is pretty easy: Go to the device manager => right click on graphic card => Update driver.
Now you can install the driver without problems.
Bye

Problems displaying rtf memo fields

Post Author: Davidm
CA Forum: General
We use Crystal Reports X to run reports on an Access database with a significant number of rtf memo fields. We use Total Access Memo to allow extended use of rtf within Access as our users require the additional formatting capabilities that this offers.
However, there are considerable problems displaying items like bullet points, tables and hyperlinks in the Crystal Viewer with tables in particular coming out in a real mess with all entries in the table being displayed in a list with a small square marking each cell at the end of each line.
Curiously, if you preview the report in the full version of Crystal X, it appears a bit better with the hyperlinks still underlined (bullet points still vanish) and rows in rtf tables are at least presented as a row even if the columns are not ordered and mixed (with no bounding cells visible).
Firstly, is this disparity of end result between full Crystal X Print Preview and the Crystal X Viewer fixable?
Secondly, is the limited handling of rtf tags likely to be solved in the next release of Crystal?

Hi Mathias,
If I caught you correctly, you want to display data in Adobe forms in form of tabel, right?
So, follow the steps:
1. Insert one sub form on your adobe form.
2. Set its type as "flow content" in object->subform property.
3. Set flow direction as "Table".
4. Insert another subform inside this subform.
5. set its type as "flow content" and flow direction as "Table row".
6. Now, choose binding tab, and there check "repeat subform for each Data item check box" and specify min. count for your rows.
7. Now, insert your column fields inside this sub form once.
8. Format its look and feel as you want.
When you run this application, it will show you multiple data as table on Adobe form.
Regards,
Bhavik

I have problems with office for mac screen resolution, specially with excel

I have problems with office for mac screen resolution, specially with excel ?

For starters, make sure to Check for Updates on any of the Help menus, and make sure the product has all the latest patches. MS did come out with a patch addressing the display issues on Retina Macs. Latest patchlevel is 14.3.2.
We are talking about Office:Mac 2011, right?

Problem Display BSP for Appraisals

Similar Messages

Maybe you are looking for