Problem displaying link in Firefox, works fine in IE.
I just noticed a problem yesterday after a customer called and said that they weren't able to view the 24 volt computer link on our website. So I went can check with Firefox and it won't display when I never used to have any problems with Firefox. I tried in IE and it worked fine. Any help would be greatly appreciated. The website is www.lamppakuuma.com and the link that won't display is http://lamppakuuma.com/24%20Volt%20Computer.html. It is under our furnace section. Any advice would be greatly appreciated because this is my 1st website design and it used to work correctly.
Thank you,
Vaporfire wrote:
I just noticed a problem yesterday after a customer called and said that they weren't able to view the 24 volt computer link on our website. So I went can check with Firefox and it won't display when I never used to have any problems with Firefox. I tried in IE and it worked fine. Any help would be greatly appreciated. The website is www.lamppakuuma.com and the link that won't display is http://lamppakuuma.com/24%20Volt%20Computer.html. It is under our furnace section. Any advice would be greatly appreciated because this is my 1st website design and it used to work correctly.
Thank you,
Just giving a link isn't any good to anyone, no-one can see a link unless they start clicking on everything on the page. Can you tell us what words/image to click on?
Similar Messages
-
My Safari is no longer working with many sites. However Chrome and Firefox work fine. I would like to re-install Safari in an effort to clear up the problem I can not resolve.
1. From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
2. Select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Test.
3. If the above steps don't resolve the problem, please describe it in more detail. -
When I boot my Mac (Snowleapord 10.6) and attempt to start Firefox, the system alerts me that it cannot find the internet and requests that I try again. It is not until I start Safari, establish a connection that I can get firefox to work. This is a new problem. Until recently, things worked fine. How do I resolve this issue?
Same proble here, although the Firefox system requirements says it is OK to have PowerPC G3 G4 or G5 ( I have G5 2GHZ)
My solution; very simply use timemachine to restore the previous Frefox 3.x
worked great in 3 mns -
Can't open Pdfs in firefox, works fine in Safari. Please help?
Can't open Pdfs in firefox, works fine in Safari. Please help?
This resolved my problem
I checked and my Firefox is doing (or not doing in this case) the same thing. There seems to be a problem with the Snow Leopard and the Adobe browser plugin. I was able to get Firefox working again by going to Firefox > Preferences > Applications and switching all to Adobe settings to "Use Adobe Reader (default)" instead of the plugin. Then I went to Tools > Add-ons... > Plugins and disabled the Acrobat plugin. Restarted Firefox and now pdf worked. -
for the last 6 months my mac is crashing all the time. I think it is safari because firefox works fine. Any suggestions?
What is crashing, is it just Safari or is the entire computer freezing (if that's what you mean by crashing)? If the latter, are you saying it only happens when Safari is open?
You need to explain with more detail just what is happening and when.
Do you get a message to restart? -
Safari won't open anything. Firefox works fine.
Safari won't open anyuthing. Firefox works fine. Is something happenng at the Safari end?
Sue --
Are you really still on 10.5.1?
Tell us your exact OS, the version of Safari you're running, how long this has been happening, etc. Is it actually crashing? Does it open up with your Home Page? Then what happens when you want to see a site? -
I have Firefox 28 which worked fine when I had Windows XP. Upgraded to WIndows 7 (updated all my drivers, etc). Now Firefox has times when it will not respond. Have tried most suggested fixes I could find on here and on-line. Nothing fixes it. It worked fine before the upgrade. This may sound like a dumb question to computer savy people, but would the older dual core processor be having a problem now that I am running Windows 7? Everything works great on the computer except for Firefox and Internet Explorer. I download Google Chrome and so far have not had an issue when using it. I don't care for it and would like to go back to Firefox, but the fixes don't fix it. I have uninstalled and re-installed and disabled plug-ins and removed and added and updated plug-ins, ran various virus/spyware scans, reset, downgraded to an older version, upgraded again, and a ton of other fixes. I wish I could figure out what changed from Windows XP to Windows 7 that would affect both browsers.
I doubt that the processor is the problem here. It might be that something went wrong with your browsing profile during the operating system upgrade.
One thing you can try is to reset your profile: in the "Help" menu, there is an entry "Troubleshooting Information". Clicking on that takes you to a page containing technical information about your machine and browser configuration. Additionally, it has a "Reset Firefox" button in the upper-right corner. Clicking on that starts a process that allows you to create a new, clean profile that contains your browsing history and bookmarks, but does away with potentially-problematic settings in your profile. (Don't worry, your original profile will be left untouched and you can return to it later.)
In many cases, this process solves issues people have with their browser misbehaving, so I hope it works for you, too. -
I can't get yahoomail to open using foxfire or safari. I just installed updates then the problem began. Gmail is working fine
What happens when you try?
-
URL Cloaking doesn't work with Safari - IE & Firefox work fine
Hi There,
just wondering if anyone else has had this problem.
If I choose "URL Cloaking" from the domain options on my ISP's site, Safari cannot find my site, or links on the site quite often will not work.
IE on a PC and Firefox on both platforms work fine.
Does anyone have any suggestions? My Site URL is: www.svelte.net.nz
Any help would be much appreciated as cloaking hides the .Mac address which is kind of useful.
Cheers
BenHI There Tom,
I turned URL cloaking off so hadn't come back to the forum to see your reply - sorry for this. But now I need to have cloaking back on.
I'm not an HTML coder so don't know what I'm looking for. I might send this in to Apple and see If I get a response. Anyway, here is the code in case you or someone else knows if the ISP has got something wrong.
Any help would be much appreciated.
Cheers
Ben
<!-- 13452:33834:www.svelte.net.nz:<a class="jive-link-external-small" href="http://web.mac.com/ben.sciascia/:cloak:">http://web.mac.com/ben.sciascia/ :cloak:</a> --><html>
<frameset rows="*" cols="*" >
<frame name="topFrame" scrolling="auto" src="http://web.mac.com/ben.sciascia/" frameborder="NO" marginwidth="0" noresize marginheight="0">
</frameset>
</html> -
Upgraded to latest Firefox version on my laptop w/ Vista Home Premium and get no browser page; no back buttons; no bookmarks/favorites; no address bar...nothing like a typical browser page...all I have is a cumbersome Firefox bar that has preset sites that do nothing when clicked.
FF worked fine before I "upgraded". Want 3.5 back
== This happened ==
Every time Firefox opened
== about 5 days agoI followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
Two points, Steve:
1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
Do you have any idea what to do to solve the problem?
Regards -
Sharepoint 2010 - Home Page not displaying, all other pages work fine
The web page URL <server>/sitepages/Home.aspx is not displaying when accessed. All other pages work fine. We changed the default welcome page to another page, and that works. When we try to access the Home.aspx, it displays "An unexpected error
occurred" message. The Home.aspx only contains a couple of Lists, with Links, and a calendar. The other odd thing is that the Home.aspx displays in SharePoint designer in Advanced Edit mode, but won't display in a browser. Any ideas?Hi Isepic,
1) Check the approval of the page (Home.aspx) whether it is in pending state .
2) OR might be some problematic webpart is added in the page. You can try to close it and access. To do that,you can try to access the web part maintenance page of home.aspx and test by closing the webpart one by one.
To access the maintenance page,pass the parameters ?contents=1 after the home.aspx
For example, http://site url/home.aspx?contents=1
3) Also,check the ULS logs after accessing the home.aspx to know what is happening.
Please remember to mark your question as answered & Vote helpful,if this solves/helps your problem.
s p kumar -
Version 26 works fine. When it updates to version 27.01, I get undefined entity. I've tried uninstalling and then reinstalling. I've tried to bring up profile manager but it doesn't come up. I've tried deleting Firefox folders. I'm very disappointed that Firefox rolls out an update that causes problems. None of your recommendations is working and I really hate to lose Firefox but this is pathetic. I'm using version 26 as much as i can till someone gives me the right solution. Is there a simple link to click on that will clear up any old profiles and simply fix this issue?
That means you need to clean reinstall.
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
More information about reinstalling Firefox can be found [https://support.mozilla.org/en-US/kb/troubleshoot-and-diagnose-firefox-problems?esab=a&s=troubleshooting&r=3&as=s#w_5-reinstall-firefox here].
Please report back to see if this helped you!
Thank you. -
2.1 EA2 does not display query results, query works fine in sqlplus
2.1 EA2/Windows XP 32-bit
The following query does not show any results for Total(GB) and Free(GB) columns. The diskgroup name shows correctly.
SELECT
DG.name ,
ROUND(SUM(DSK.TOTAL_MB)/1024,2) "Total (GB)",
round(SUM(DSK.FREE_MB)/1024,2) "Free (GB)"
FROM
V$ASM_DISK DSK,
V$ASM_DISKGROUP DG
WHERE
DSK.GROUP_NUMBER=DG.GROUP_NUMBER
group by DG.name;
The query works fine when run from SQL*Plus:
SQL> SELECT
2 DG.name ,
3 ROUND(SUM(DSK.TOTAL_MB)/1024,2) "Total (GB)",
4 round(SUM(DSK.FREE_MB)/1024,2) "Free (GB)"
5 FROM
6 V$ASM_DISK DSK,
7 V$ASM_DISKGROUP DG
8 WHERE
9 DSK.GROUP_NUMBER=DG.GROUP_NUMBER
10 GROUP BY DG.name;
NAME Total (GB) Free (GB)
DG1 707.98 162.32
DG2 134.84 122.68
SQL>
This must be something unique to SQLDeveloper. I tested in 2.1 EA1 and 1.5.5.59.69 and the query does not show results for the Total (GB) and Free (GB) columns.I would like to update the problem. It seems like when SQLDeveloper is connected to ASM instance, it has trouble using the divide operator (/). For example, the following query works fine:
SELECT
name,
TOTAL_MB
FROM
V$ASM_DISKGROUP;
But if I try to divide the TOTAL_MB by any number, the column shows blank (the column is blank, not NULL). So, if I try to run the following query, the output will just display diskgroup names. The TOTAL_MB/1024 column shows blank.
SELECT
name,
TOTAL_MB/1024
FROM
V$ASM_DISKGROUP;
If I run the same query in SQL*Plus from the same desktop using the same TNS alias, it works just fine which tells me that it is a SQLDeveloper problem.
When I am connected to a regular database, then the problem does not show up and SQLDeveloper is able to display the results even when I am using the divide operator (/). -
Safari won't load Paypal but firefox works fine
I've seen a few threads on this problem but nothing I've tried seems to work. Two days ago safari stopped being able to access Paypal on both my Macbook Air and iMac. Both machines are less than 6 moths old, running the latest OS X and have all the updates installed. The problem became apparent when I tried to make an eBay purchase and the redirect to Paypal failed. I tried opening Paypal from Safari directly and it returns the message "Safari cannot open the page "..." because Safari can't establish a secure connection to the server."
So far, I have checked the date & time settings, rebooted everything, checked all the certificates on Keychain deleting any that had expired and I have changed the DNS settings to 8.8.8.8 & 8.8.4.4 - this had the effect of causing iMessenger to cease to work and also prevented me from accessing the iCloub website stating the same "Failed to open page" message. In exasperation I have even reinstalled OS X on my Macbook which did work for about thirty seconds, allowing me to login to paypal but on going back to the sight after restarting to double check, it has reverted back to the failed to open page status. iMessanger and iCloud are now fixed though.
I have downloaded and opened Firefox and tried the same web address and it works fine.
The Paypal issue is a mystery therefore that I hope someone can help with as it's effected both my machines and I have had to revert to the iPhone App to pay for anything using Paypal, which is a pain. Any ideas would be most welcome.MIght be a cookies, cache, or extension issue ..
From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If that didn't help, troubleshoot Safari extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall. -
This app was working fine, then suddenly it won't display any of the photos. One day the photos were there, gone the next. It still shows how many photos are there but just shows a white screen. I can't export anything to the photo album. Adding photos to existing folders yields the same result, only white screen displayed. However, I can create new albums and add photos to those without issue. Does anybody know how to recover the "missing" photo" I was going to try reinstalling the app but it's no longer available in the iTunes App Store. Thanks, Tracy
1, you can't at the moment, though with iOS 5 in the Autumn, from http://www.apple.com/ios/ios5/features.html#photos :
Even organize your photos in albums — right on your device
2, by removing it from you synced from and re-syncing. Only photos taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad (either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view)
3, the location of the photos that you synced to the iPad should be listed on the iPad's Photos tab when connected to your computer's iTunes.
4, you can copy the photos from your iPad to your computer : http://support.apple.com/kb/HT4083 . You should also be able to delete them from the iPad as part of the transfer process to your computer, and it's then your choice whether to add them to your sync photo list so as to copy them back to the iPad. Copying them to your computer would allow you to organise them into folders and therefore be able to sync them back into separate albums.
5, I don't use Dropbox either. There are some third-party browser apps in the iTunes App Store that allow you to download pages so that you can view them when offline e.g. Atomic Web (the whole page is saved within Atomic Web, it doesn't place a photo into the Photos app)
6, deleting content should help. If you remove an app from your iPad then you also remove the content that it's got on the iPad - so if you then decide to reinstall it back onto the iPad then you will need to manually add back any content that you want in it. None of the Apple built-in apps (including Photos) can be removed from the iPad
Maybe you are looking for
-
HOW TO USE STORED PROCEDURES IN JASPERREPORTS(URJENT)
Hi, i'm using jasperreports in struts based project. How to use stored procedures in jasperreports. pls send the solution urjent Thanks in advance ramesh
-
I have a split classroom with a 4320 in each room. Occasionally we need to open the rooms and use them as one room for large audiences. I would like to drive both projectors with a single PC. Can I daisy chain the projectors together to accomplish
-
When I try to start up iSync I get the following error message: iSync can't be launched SyncServices: Can't connect to sync server: NSInvalidReceivePortException: connection went invalid while waiting for reply ((null)) iSync is supposed to sync my E
-
I have read the manual, but how do you transfer photos from pc to ipod 30gb
I read the manual and went online. how do you transfer photos from pc to ipod? is it mandatory to have adobe photoshop or adobe elements? Can I just transfer from my pictures?
-
TS2755 How do I increase SMS Capacity on my IPhone?
How do I increase SMS capacity on my IPhone?