Problem displaying some pages since upgrade of leopard

Hello everyone
Is anyone experiencing difficulties after the new leopard upgrade.
It all seemed to go well until I tried to read some of my pages. What is weird is that the pages are published and functionning well if accessed from the http..mydomain.com but if I try accessing using web.mac.... I can read some of the pages in the site others are 404.
the ones that are accessible are all password protected the 404 ones are not.
Any light would be appreciated.
Thank you in advance
Mireille

Hello everyone,
I am bumping this up because I really need to solve this problem and I am stumped I must be doing something dumb but I am not seeing it.
I will give the real url so that you may suggest what I am doing wrong.
if I type http://www.clubiweb.com/iweb/Accueil.html or even just clubiweb.com no problem everything on the site opens and works.
but if I try to go through .mac
http://web.mac.com/clubiweb1/iweb/Accueil.html I get a not found page and this for any page on the site except for those that are proctected by a password.
they used to work before the update but that does not mean the update is responsible. I am using the same parameters as I did before
What am I missing?
does anyone see it please.
Thank you
Mireille

Similar Messages

MB Pro, with Tiger, which has since upgraded to Leopard - Install Discs?

My MacBook Pro had originally been installed with Tiger. I have since upgraded to Leopard.
Should I need to boot from my install discs, which install disc do I use? Will my Tiger install discs work with Leopard, or should I use my Leopard disc (retail version)?
Thank you!

{quote:title=Kappy wrote:}
Actually you would be better to install Leopard directly. You can reinstall pre-bundled software separately without installing Tiger. An Erase and Install of Leopard would be preferable to installing Tiger then upgrading to Leopard. Less chance of a problem.
Hi Kappy,
Some, at least, of the late 2007 MBP C2D 2.2 and 2.4 GHz MBPs (mine included) actually came with Tiger Installed, but with a "drop in" copy of Leopard enclosed in the box. From memory the version of Leopard included will only install if the original software is in place. (I'm not 100% certain of this, but I'll check) Not sure what Trisha's situation is, of course, but worth bearing in mind as a possible issue.
Cheers
Rod

Why is Safari not displaying some pages correctly?

Safari seems to be messing up again. Had this problem quite a while ago. It's not displaying some pages correctly.
Notice the 2 enclosed screen shots. I went to purchase something (no personal info in the jpgs)
Notice the W-Safari. Little trash cans by the purchase items missing as well as the submit button and a few other things. So I opened Chrome.
Notice in the W-Chrome, everything is displaying correctly.
I've had problems like this some time ago but I thought they were fixed.
Thanks for any suggestions or help.
Allen

Post a URL so what we can look at it.

Please help - computer is crashing & freezing ever since upgrade to Leopard

Ever since upgrading to Leopard, my computer has been crashing a lot more. Sometimes it just freezes up. Most recently, I got the gray screen with a bunch of different languages telling me to restart using the power button. Here is the crash report. Can anyone tell me what's going on, and if there's anything I can do to help?
Thanks!
Tue Mar 24 13:00:49 2009
panic(cpu 0 caller 0x001A9C68): Kernel trap at 0x0040de14, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x000002c0, CR3: 0x0108a000, CR4: 0x00000660
EAX: 0x06745c00, EBX: 0x2e583bf0, ECX: 0x06745ccc, EDX: 0x00000000
CR2: 0x000002c0, EBP: 0x2e583bd8, ESI: 0x04866d00, EDI: 0x06745c00
EFL: 0x00010206, EIP: 0x0040de14, CS: 0x00000008, DS: 0x01880010
Error code: 0x00000000
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x2e5839e8 : 0x12b4f3 (0x45b13c 0x2e583a1c 0x1335e4 0x0)
0x2e583a38 : 0x1a9c68 (0x464700 0x40de14 0xe 0x463eb0)
0x2e583b18 : 0x1a038d (0x2e583b30 0xb6dcfb0 0x2e583bd8 0x40de14)
0x2e583b28 : 0x40de14 (0xe 0x48 0x2e580010 0x140010)
0x2e583bd8 : 0x7474b9 (0x6745c00 0x0 0x0 0x0)
0x2e583c48 : 0x747547 (0x6745c00 0x4866d00 0x9a00780 0x19eb5b)
0x2e583c68 : 0x5db609 (0x4866d00 0x4 0x46 0x136b31)
0x2e583cc8 : 0x5db679 (0x5a30600 0x4866d00 0x2 0x2)
0x2e583d08 : 0x34773463 (0x5a30600 0x4866d00 0x2 0x2)
0x2e583d28 : 0x60b211 (0x5a30600 0x4866d00 0xe0004051 0x1f)
0x2e583d98 : 0x85b117 (0x3c29000 0x3d88900 0xe0004051 0x1f)
0x2e583e38 : 0x85c047 (0x3c29000 0x3e79488 0xe0004051 0x0)
0x2e583e88 : 0x85c1b4 (0x3c29000 0x3e785c0 0xc954252c 0x7f33)
0x2e583ec8 : 0x6078f7 (0x3c29000 0x3e8 0x53f69c 0x3e10a40)
0x2e583f28 : 0x424cb8 (0x3c29000 0x3d68b00 0x53f0c0 0x1)
0x2e583f78 : 0x13eed2 (0x3d68b00 0x3d68919 0x0 0x0)
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOUSBMassStorageClass(2.0.4)@0x34772000->0x3477bfff
dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(2.0.5)@0x5d5000
dependency: com.apple.iokit.IOUSBFamily(3.2.7)@0x606000
dependency: com.apple.iokit.IOStorageFamily(1.5.5)@0x72d000
com.apple.iokit.SCSITaskUserClient(2.0.5)@0x745000->0x74afff
dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(2.0.5)@0x5d5000
dependency: com.apple.iokit.IOStorageFamily(1.5.5)@0x72d000
com.apple.iokit.IOSCSIArchitectureModelFamily(2.0.5)@0x5d5000->0x5edfff
com.apple.driver.AppleUSBEHCI(3.2.5)@0x851000->0x862fff
dependency: com.apple.iokit.IOPCIFamily(2.5)@0x636000
dependency: com.apple.iokit.IOUSBFamily(3.2.7)@0x606000
com.apple.iokit.IOUSBFamily(3.2.7)@0x606000->0x62efff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9G55
Kernel version:
Darwin Kernel Version 9.6.0: Mon Nov 24 17:37:00 PST 2008; root:xnu-1228.9.59~1/RELEASE_I386
System model name: MacBookPro2,2 (Mac-F42187C8)

I'd suggest doing this:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Since upgrading to Leopard I cannot iSync to my Nokia 6233

Since upgrading to Leopard I cannot iSync to my Nokia 6233 via bluetooth (I never did it by USB). The devices are paired and I can transfer files via Bluetooth so the basic setup is there. I have installed the Nova Media phone plugins for isync and my 6233 appears on my isynch bar and allows me to chose what to sync but when I click sync it cannot connect. (I have also been unable to use launchtonet from Nova Media since the upgrade. When I try to use it I get a message that no devices were found within reach.) Something is out of kilter - anyone got a suggestion? thanks a lot, JJ

Hello,
I have the same Nokia 6233 and the following way solved the problem.
1. Go to /Applications -> iSync.app -> Contents -> PlugIns -> ApplePhoneConduit.syncdevice -> Contents -> PlugIns -> PhoneModelsSync.phoneplugin -> Contents -> Resources. (From Finder, use Shift-Command-G, for Go to Folder; or Control-click iSync in Applications.)
2. Open MetaClasses.plist in a text editor.
3. Search for <key>com.nokia.6230</key>. Then find the end of the script for the 6230 phone - the </dict> tag just before the next phone's <key> tag.
4. Copy the following script and paste it between the </dict> tag for the 6230 and the next phone's <key> tag:
<key>com.nokia.6234</key>
<dict>
<key>Identification</key>
<dict>
<key>com.apple.cgmi+cgmm</key>
<string>Nokia+Nokia 6234</string>
</dict>
<key>InheritsFrom</key>
<array>
<string>family.com.nokia.series40.3rdEd.bus.bt</string>
</array>
<key>Services</key>
<array>
<dict>
<key>ServiceName</key>
<string>com.apple.model</string>
<key>ServiceProperties</key>
<dict>
<key>ModelIcon</key>
<string>NOK6234.tiff</string>
<key>ModelName</key>
<string>6234</string>
</dict>
</dict>
</array>
</dict>
5. If you have a Nokia 6233, change all the references to 6233 to 6234.
6. Save and close the MetaClasses.plist file.
7. In the same folder, duplicate the file NOK6230.tiff. Change the filename to NOK6234.tiff (or NOK6233.tiff if that is your phone). This file is the image of your phone which appears in iSync - if you want an accurate pic of the 6233/6234, find one and save it as a 60x60 transparent .tiff file).
8. Open Bluetooth Preferences. Delete any existing pairing for your Nokia 6233 or 6234 phone.
9. Create a new pairing for your phone.
10. Open iSync and you should now be able to sync your phone:)
If it works just copy the MetaClasses.plist file and save it anywhere. For the next updates You just have to copy it into the folder in iSync. This helps You saving time.
If You want to use my MetaClasses.plist, You may send me Your Email-adress. Then I will send it to You.
Good luck

Since upgrading to Leopard, can't check for software updates or iTunes stor

since upgrading to Leopard, i can't get software upgrades. I get error messages "software update can't connect to the update server. make sure you're connected to the internet, then try again. software update can't check for updates because of a network problem." My network connections are fine.
Also get "itunes could not connect to the itunes store. the network connection was refused. make sure your network settings are correct and your network connection is active, then try again." when I try to go to itunes store. Again, my network connections are fine.
Any ideas?

the solution is to use Little Snitch Configuration.app, which monitors online activity and gives option to allow/deny access of a given program.

'Bluetooth not available' error message since upgrading to Leopard

Hi, I regularly seem to get a 'Bluetooth not available' error message since upgrading to Leopard, any ideas why, have to reboot to shake it.
cheers
Simon

I solved the same issue by resetting the SMC. With the computer off, remove the battery and press and hold the power button for 5 seconds. Then reinstall the battery and restart. I haven't had any bluetooth issues since.

HT1391 How can I get a full history of our purchases? We had some problems with some downloads since 5/25/12.We were charged for items that said "Free"? Help

How can I get a full history of our purchases? We had some problems with some downloads since 5/25/12.We were charged for items that said "Free"? Help

iTunes Store menu > View My Account...
Sign in and select "See All" in Purchase History.
You can only see them in "batches" of ten. As far as I know there is no way to obtain a comprehensive summary.
The prices are tabulated in that list. If they were supposed to be free, and they show that you were charged, then click the arrow next to the suspect purchases and click "report a problem".

Problem with Cisco VPN since upgrade to Snow Leopard

Since upgrading to Snow Leopard a couple of hours ago I can no longer open up my CiscoVPN application (version 4.9.01) which I use to connect to my network at work. When I try now I just get an "Error 51: message"
*Error 51: Unable to communicate with the VPN subsystem.*
Please make sure that you have at least one network interface that is currently active and has an IP address and start this application again.
I can still connect to the network if I use Parallels and use the Windows VPN client - but that's not really the point! I've tried the popular suggestion for Error 51 errors in the past (typing "sudo SystemStarter restart CiscoVPN" via Terminal) which doesn't work.
Any ideas or help appreciated.
Acculess

I was able to get it working without re-downloading the client (4.9.0.1.0080 was already installed). I noticed that System/Library/StartupItems/CiscoVPN had been removed during the upgrade to snow leopard, so I pulled it back off of a Time Machine backup. Restoring that directory and doing a 'sudo /System/Library/StartupItems/CiscoVPN/CiscoVPN restart' seemed to fix things up.

I am experiencing some crashes since upgrading to ML. should I archive and reinstall OS?

Since I upgraded to ML I have had various problems with finder crashing, other programs crashing. I have deleted
1) ~/Library/Caches
2) ~/Library/Containers
3) ~/Library/Saved Application State
which helped but still having some crashing and erratic behaviour. I created a new account which is somewhat better but I don't know how to transition my setting to the new account (it is an admin acount). Is there a way to do this, or would I be better off doing an archive and install? I have already backed up my files since upgrading. If I did do an archive and install, would I be restoring problems? Thanks for your help.

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line on this page to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

HT2506 Is there anyone else who is having problems printing with Preview since upgrading to Lion OS X?

Since upgrading to Lion OS X, I have not been able to print any of my documents that were created in Adobe PDF. All calls to customer support have been a bust.
When I try to print anything it comes out looking like this:
Apple PREVIEW team!!!! PLEASE HELP!!!

Hi Linc...
Here is a copy of your prior post to me on a different forum...
Still no resolution...
Linc Davis
Re: Anyone having problems with Preview since upgrading to Lion OS X? When using a pdf form that allows multiline text, I am finding that the printing is completely illegible. The lines are stacking on top of each other.
Mar 11, 2012 3:13 PM (in response to pshrynking)
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, selectHelp from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.) Post the results of steps 1 and 2.
pshrynking
Re: Anyone having problems with Preview since upgrading to Lion OS X? When using a pdf form that allows multiline text, I am finding that the printing is completely illegible. The lines are stacking on top of each other.
Mar 11, 2012 4:13 PM (in response to Linc Davis)
Did all of that yesterday, with the Apple Representative on the phone, and nope, still a problem...it was kind of exciting, really, they kept going up and up the tiers of support until I got disconnected...Fortunately I had the email address of the gentleman who was helping me so that I could email him back and let him know that we got disconnected...as you might imagine, he still has not emailed me back. They were able to receive a copy of the form that I use for charting and try it in their facility on their computers, so we know:
1- it is not just my computer.
2- it occurred only after installing Lion OS X, not sure if they have tried it on Snow Leopard, but that's what I would have done if I was them...assuming that somewhere in Apple someone has not upgraded to Lion.
3- it is not just my software.
I think the problem is with the newer iteration of Preview not communicating well with the Adobe .pdf. probably some line of coding that needs to be written and insertedinto their program for multiline text.
:-) Thank you for your help!

Capture not working (since upgrade to leopard)

hi
i have upgraded my OS to leopard and since doing that if i try to open FCE with my camera attached (to the back of the mac via firewire) the rainbow wheel comes up and FCE just wont open until i turn the camera off. i also get the same problem if i try to capture anything, but without the camera on everything else works fine i can edit existing clips etc.
this was never a problem before i upgraded to leopard, are there some setting i need to change in order to get round this?
the reason i upgraded was to be able to use the magic mouse fully.
equipment i am using is as follows:
camera: Canon XM2
computer: power mac G5
OS: 10.5.8
FCE: 3.5.1

okay, i have done as you suggested and uninstalled FCE and then re-installed from the upgrade which appeared to work first time i went to use capture, but then went back to use it again the next day and i had the same problem again!!
but after a few times of plugging and unplugging the firewire it finally regognised that the camera was there, one of the odd things i noticed was that when i plugged it in to the back of my g-raid hard drive it did recognise that the camera was there and i could control it from capture but it didn't show any images from the camera?
any ideas from anyone as to why it seems to be working intermittently?

Airport w/wireless not working since upgrading to Leopard

I run a laptop via a NETGEAR wireless system from my main machine.
I had no problem until I upgraded to Leopard. Now the laptop doesn't see the wireless via airport. help!!

To Clifford Hritz
Re: Networking
Sadly, this is still a problem for at least some MacBook Pro's and OSX on version 10.5.2 and above.
Our MBP is still on 10.5.1 (with WPA), but gets 'connection failed' on any System Software version above that, with *no other* parameters changed on our side. Curiously, my iMac doesn't connect wirelessly either, on any version above OSX 10.5.1, so I use ethernet instead. The MBP remains (yet works perfectly) on 10.5.1, meaning that any subsequent security updates, plus other enhancements, are unavailable to the regular user of that machine (and she is not too happy about it!).
I have read many of Mr Kucharski's posts and he is undoubtedly very knowledgeable regarding Mac OSX etc., but seems unable to resolve this issue. He does try hard to be helpful (that is clear). However, other users have insisted that there is a problem with OSX past 10.5.1 or .2 and wireless networking with at least some MBPs (and perhaps MacBooks), after having removed all other factors.
Sorry that this doesn't help. I can only console with the thought that there are others out here with the same problem, still waiting for Apple to acknowledge, let alone correct it. Perhaps 10.6 will be the answer.
End of rant.

Safari and Chrome will not display some pages right for new user account

Not sure this is a Safari issue actually. Behavior is also in Chrome, but not Firefox. If I need to post elsewhere please advise.
24"imac running 10.5.8. 2gb ram, software update run,
Setup a new user account. Machine will have 2 users.
When I login as the new user, in both Safari and Chrome, some pages - google, ebay, amazon, cnn, yahoo, do not display correctly. Mainly empty space, a few graphics all wrong. They do display correctly in Firefox.
I assumed it was the user. So I added a 3rd user. Same behavior. Tried giving the new user admin rights. Same problem.
For the admin account, everything's fine on those pages, both in Safari and Chrome.
It feels like the new user is not getting access to something it needs, but it also feels like more than a font problem. Thanks for any suggestions. Dan

Thanks for your thoughts. Here's what I've learned. The browsers display correctly for the new user after SafeBoot. I removed all startup items, to no avail. Removed all fonts from the new user account, nothing. Removed all fonts from the admin user's library, nothing. Then I removed all fonts from the HD library, and that fixed it for the new user. Now I just have to figure out which one it was.
So in summary, a bad font in the HD library was affecting Safari and Chrome (but not Firefox) in new user accounts, but not in the admin user's account. Nice. D

Problem displaying error page of web.xml when using JSF, Ajax4jsf

Hi,
My application is using MyFaces, RichFaces and Ajax4jsf. When i try to display error page configured in web.xml, i am getting exception "Error while processing error page".
my web.xml contents are as follows:
<?xml version="1.0"?>
<web-app version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
<filter>
<display-name>RichFaces Filter</display-name>
<filter-name>richfaces</filter-name>
<filter-class>org.ajax4jsf.Filter</filter-class>
</filter>
<filter-mapping>
<filter-name>richfaces</filter-name>
<servlet-name>faces</servlet-name>
<dispatcher>REQUEST</dispatcher>
<dispatcher>FORWARD</dispatcher>
<dispatcher>INCLUDE</dispatcher>
</filter-mapping>
<filter>
<filter-name>extensionsFilter</filter-name>
<filter-class>
org.apache.myfaces.webapp.filter.ExtensionsFilter
</filter-class>
<init-param>
<description>
set the size limit for uploaded files. Format: 10 - 10 bytes 10k
- 10 KB 10m - 10 MB 1g - 1 GB
</description>
<param-name>uploadMaxFileSize</param-name>
<param-value>100m</param-value>
</init-param>
<init-param>
<description>
Set the threshold size - files below this limit are stored in
memory, files above this limit are stored on disk.
Format: 10 - 10 bytes 10k - 10 KB 10m - 10 MB 1g - 1 GB
</description>
<param-name>uploadThresholdSize</param-name>
<param-value>100k</param-value>
</init-param>
</filter>
<filter>
<filter-name>Seam Redirect Filter</filter-name>
<filter-class>org.jboss.seam.servlet.SeamRedirectFilter</filter-class>
</filter>
<filter>
<filter-name>KTServletFilter</filter-name>
<filter-class>com.kenexa.core.system.KTServletFilter</filter-class>
</filter>
<filter-mapping>
<filter-name>extensionsFilter</filter-name>
<url-pattern>*.jsf</url-pattern>
</filter-mapping>
<filter-mapping>
<filter-name>extensionsFilter</filter-name>
<url-pattern>/faces/*</url-pattern>
</filter-mapping>
<filter-mapping>
<filter-name>Seam Redirect Filter</filter-name>
<url-pattern>*.jsf</url-pattern>
</filter-mapping>
<filter-mapping>
<filter-name>KTServletFilter</filter-name>
<url-pattern>*.jsf</url-pattern>
</filter-mapping>

<listener>
<listener-class>org.jboss.seam.servlet.SeamListener</listener-class>
</listener>
<listener>
<listener-class>com.kenexa.kr.web.KRServletListener</listener-class>
</listener>
<servlet>
<servlet-name>faces</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>faces</servlet-name>
<url-pattern>*.jsf</url-pattern>
</servlet-mapping>
<error-page>
<exception-type>java.lang.Throwable</exception-type>
<location>/rc/systemError.jsf</location>
</error-page>
</web-app>
As per the configuration, when exception is thrown out of the application, container tries to display systemError.jsp page. If we want to include the JSF tags in systemError.jsp page, the request should pass through FacesServlet, so in the <error-page> <location> tag systemError page is specified with the extention systemError.jsf though it's actual extention is .jsp
When exception is thrown from the application container invoke the error page but, while rendering systemError.jsf page exception is thrown saying "Exception processing error page "systemError.jsp" "
To solve this problem i've gone through several forums, materials.
In one forum a guy said, JSF1.1 spec has some problem in displaying error pages. To solve this don't write <f:view> tags in the error page, use <f:subview> intstead. By reading this, i again changed the contents of systemError.jsp page replacing <f:view> by <f:subview>. But the error is still repeating.
Finally what i found is, when we use Ajax4jsf in the application, its AjaxViewRender class is throwing exception while rendering error pages configured through web.xml.
So what i did is i changed error page extention from .jsf to .jsp in the <location> tag. Now jsf won't come in the picture and remove JSF related tags from the systemError.jsp page.
<error-page>
<exception-type>java.lang.Throwable</exception-type>
<location>/rc/systemError.jsp</location>
</error-page>
Any comments are welcome----------------------------------------------------------------

I too iam facing the same problem could you advise if you have found any solutions
-Ram

Problem displaying some pages since upgrade of leopard

Similar Messages

Maybe you are looking for