Problem Do A Clean Install on my Macbook Pro

I have a lot of stuff on my macbook pro that i dont need and wanted to do a clean restore of my laptop, i put in the Mac DVD of the operating system and it states that the computer is going to restart the computer and enter into "Disk Utility" the computer restarts then it comes up with the grey screen with the apple symbol and it basically freezes on the screen, the loading circle below the apple symbol doesnt come up at all and it wont move on, i waited for over 4 hours and it stayed on the grey screen, i then tried the method again, and again it stalls on the grey screen with the apple symbol.
Is there anything i can do to fix this as I want a clean uninstall with only the original programs on my laptop
Thanks

Insert the installer disk that came with the MBP and reboot while holding down the 'c' key. Then go into DU and erase the drive and reinstall the OS. When the MBP reboots and Mac Setup Assistant starts to run quit out of it and shut down the MBP.

Similar Messages

A clean install on my MacBook Pro has left my icons stuck on the right side of the desktop. I want to move them but there is no 'None' option which I think would free them to move where I wish. Suggestions?

A clean install on my MacBook Pro has left me with my icons stuck in the grid on the right side of my desktop. I had the ability to move them and have them stay put in various sectors of the desktop, which I found very useful. The clean install upgraded the OS to 10.6.8 from 10.5.8. I want to move them again but there I see no 'None' option which I think would free them to move where I wish. Has the upgrade deleted that option? Suggestions? I am new to this community and if not new to Mac, I often feel that way. This is one of those times.
Julz11 in NYC

I have the same problem on the latest iTunes software and Windows 7. My window is maximzed and I do not see any tab for photos. Seems related to a recent update (IOS7?) as this was there - at least before the very big change to the interface.

If I do a clean install on my MacBook Pro will I be able to re-install apps (FCP, Aperture, MS Office etc.) from a Time Machine backup, or will I need the original install DVDs with authorization codes?

I have two questions...
1) If I do a clean install on my MacBook Pro will I be able to re-install apps (FCP, Aperture, MS Office etc.) from a Time Machine backup, or will I need the original install DVDs with authorization codes? (because I don't have them)
2) Has anyone ever seen anything like this before on their computers?
The Apple Genius' were stumped by my laptop issues and said they'd never seen anything like it before and recommended I did a clean install. Below you can see my trash bin, and if you look at the "Empty" button it reads "N201" and then there's the "N39" to the left of it. You can also see these numbers over by the folder area--"SD5, SD6, SD7." But that's not all...
When I right click on items I see the numbers again. Instead of "Open with" I get "N152" and there's an "N35" and "LB1" towards the bottom.
I have no idea what's going on so I'm just going to do a clean install on my machine but I don't want to lose my apps. I don't have the original install DVDs for them anymore. If you have any suggestions please let me know. Thanks!

You don't lose them. You can always redownload them from the app store after you log back in with your Apple ID.
"Buy, download, and even redownload.
You can install apps on every Mac you use and even download them again. This is especially convenient when you buy a new Mac and want to load it with apps you already own."

HT1338 I would like to perform a clean install on my macbook pro. I do not have the original disks that came the mac, however I know it was purchased in 2008.

Upgrading MacBook Pro to new machine want to unistall. No disc.

Strictly speaking you are supposed to supply the old discs with a computer since they are part of the computer package (for Macs at least).
Call Apple Customer Support 1-800-767-2775 (telephone numbers for other countries - http://support.apple.com/kb/HE57). Provide the serial number and specifications of the Mac. They may be able to provide a replacement set of discs for a fee. These discs will be for whatever OS was installed on the computer originally.
As far as your files are concerned, you can use another Mac or any retail version discs that will work in the old Mac to wipe the drive. To be more specific it would help to know what computers and which discs you actually own.
If you install an operating system (OS) on a Mac you also need to provide the discs (i'm talking about pre-OSX 10.7).
I have seen Macs sold without the original OS discs. If you do that then you at least need to provide the disc for the one on the computer. I guess you could try to sell the computer without an OS but that might be hard. If I was buying your computer I would want to see it boot, and I also might not want the hassle of getting an OS disc for it befre I could use it in any way. You'd have to come down a bit to make it sell.
Given all the above, I would still go with Snow Leopard. The retail disc itself will be as cheap as the original. The only things it might miss vs. the original will be bundled software (most of which will be outdated, though somebody might prefer older version to none) and perhaps the hardware test utility. Having a slightly newer OS might make the computer more attractive.

I am having a problem with Windows Fusion installed on a MacBook.

I am having a problem with Windows Fusion installed on a MacBook OS 10. When attempting to use a Browser, (either IE, or Chrome), under Windows Fusion, I cannot browse to ANY page except Gmail.com.
I checked all security settings, and found no problem. Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!
I am not sure if I have some virus on my Windows side, because Google and Safari both work perfectly on my Apple side, just not when running Windows Fusion.
Is there some setting I am missing, or do you think I have malware/virus issues?? My Internet connection is DEFINITELY working fine - I can send, receive, open, and close all my email on Gmail only, and can navigate freely on Gmail, but cannot get to any other site even hyperlinked to Gmail.
Any help would be greatly appreciated.
Thank you very much.

HartEJ wrote:
...Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!...
If you've already tried my previous suggestions, it may be that something has tampered with the DNS settings in your Windows VM, which might bypass the settings your Mac uses. Assuming you're using Windows 8, these instructions explain how to check and change the DNS settings. There's also a link in those instructions listing a variety of suggested DNS settings. If you do try changing the settings, record what the settings currently are in case you want to return to them.

The file "Acceptance Letter.pages" doesn't exist. Since installing Yosemite on MacBook Pro I cannot save or export from Pages. Just get the message at beginning of this post. How to solve problem?

I cannot save or export from Pages since installing Yosemite on MacBook Pro . I just get the message at beginning of this post “Acceptance Letter.pages” doesn’t exist or whatever file title I have inserted How to solve problem?

Thanks Peter but I was not seeking to store with I-Cloud. In fact I never store documents with I-cloud.
I was in fact trying to store the files to Documents, which is where I usually keep such things.
Have now discovered that if I leave the file untiled and simply close it, rather than saving it then it will save, oddly, to Documents. I then have to re-title it and move to the folder I want it in.
Despite the above, even once it is titled and saved in Documents then if I reopen it I still cannot then Export it to a Word or PDF file. I still just get the message . xxxxxx.pages does not exist!
Bad news as I am constantly exporting documents to Word and PDF to send to others who do not use a Mac

The Creative Cloud App for desktop can't be installed on my Macbook pro

I've have bought the Photoshop + Lightroom applications via the creative cloud. I can download the installion file for Crative Cloud app for desktop and I can start the installation process but it is interrupted halfway through with a message saying "The following problem have encountered: Creative Cloud for desktop could not be installed". There are no hints for any solution. I've tried to use Opera instead of Safari but the same thing happens. Is there anyone that knows what the solution for this problem is? Sincerely Lars

Thank you! You solved the problem!! /Lars
3 jan 2014 kl. 22:34 skrev AMreso <[email protected]>:
Re: The Creative Cloud App for desktop can't be installed on my Macbook pro
created by AMreso in Creative Cloud Download & Install - View the full discussion
Rename OOBE folder with OOBEOLD ( Mac HD/Library/Application Support/Adobe/OOBE folder )
Run the Adobe cleaner ( http://helpx.adobe.com/content/dam/help/en/support/AdobeCreativeCloudC leanerTool.dmg )
Remove Adobe application Manager/Adobe creative cloud .
Restart the computer and redownload Adobe Creative cloud and install it.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5978280#5978280
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5978280#5978280
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5978280#5978280. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Creative Cloud Download & Install at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Lost Elements when I installed Yosemite on Macbook Pro

I have just installed the new Yosemite OS on both my older iMac desktop (early 2008) and my one month old Macbook Pro. Photoshop Elements 9.0.3 installed along with everything else just fine on the older iMac BUT I lost it entirely during the upload to the nearly new Macbook Pro. How can I get it installed on my Macbook Pro? Both are running Mac OS Yosemite 10.10.

Greetings Mycrazylive – Thank you for the added details. I see you reside in the Netherlands. I suspected that you were a non-USA user.
Both Barbara B.’s and GoletaMum’s advice are good suggestions. Barbara B.’s advice is more intricate, and involves “deleting & trashing” actions. Therefore, I would suggest, first, trying GoletaMum’s, “…re-installing PSE -- and make sure you've updated Yosemite… find PSE 11 and reinstall it, then run the updates… first, make sure your MacOS is up to date.” --- If you are lucky, executing a clean reinstall of the Photoshop Elements 11 application you purchased and downloaded from i-Tunes to your “Apple MacBook Pro 13-inch medio 2012,” back in JAN 2014, after you re-update to “Yosemite” OS X version 10.10.1, might resolve your problem.
If GoletaMum’s suggestion does not resolve things for you, consider cautiously and intelligently proceeding with implementing the technical procedural details of “Adobe top contributor…MEMBER SINCE: August 16, 2002…Adobe Community Professional” Barbara B.’s “Resolution-Fix.”
It is not clear to me what is going on between your MacBook Pro computer & Apple Central’s “Gatekeepers,” with regard to “After startup…asks to sign up with my Apple ID…then…gives the error message: YOUR DEVICE OR COMPUTER COULD NOT BE VERIFIED.”
Did you install “Yosemite” OS X version 10.10.0, first, and then do an install of the “Yosemite” OS X version 10.10.1 update, after which your problems with PSE 11 began to appear or did you go from some other Pre-(???) “Yosemite” [???...Lion, Mountain Lion, Mavericks???] OS X (where PSE 11 functioned), and then upgrade straight to “Yosemite” OS X version 10.10.1 from there, rather than upgrading to and then from a “Yosemite” OS X version 10.10.0 install?
FYI: I am running the PSE 11 Application on a 15.3-Inch MacBook Pro “Retina” (2013) at “Yosemite” OS X version 10.10.1, and no longer have any problems with PSE 11.
Read my prior posts on this thread for the background on the “Trackpad Glitch In PSE 11,” which installation of “Yosemite” OS X version 10.10.0 caused to happen to PSE Elements 11 running on my MacBook Pro. I was running PSE 11 with the latest “Mavericks” OS X version update before updating to the baseline, initial “Yosemite” OS X version 10.10.0, after which my “Trackpad, et.al. ‘Glitches’ with PSE 11” commenced. Installation of the “Yosemite” OS X version 10.10.1 update resolved my “Trackpad Glitch In PSE 11.”

I have PS 4,5,and 6 installed on my Macbook Pro as well as Lightroom 4 and 5. Can I remove PS 4 and 5 and LR 4? PS 4 is the total install and PS 5 and 6 are upgrades. LR 4 is the full package with LR an upgrade.

I have PS 4,5,and 6 installed on my Macbook Pro as well as Lightroom 4 and 5. Can I remove PS 4 and 5 and LR 4? PS 4 is the total install and PS 5 and 6 are upgrades. LR 4 is the full package with LR an upgrade.
I need space!

First let me disabuse of a misconception: All Adobe upgrades are FULL installers. Whether you buy them as upgrades or new versions does not make an iota of difference. The upgrade installers do not need to find a prior version installed, they just prompt you for the old serial number as well as the old one, and they do not rely on the old version in the least.
Second, the time to uninstall an older version is BEFORE upgrading to a newer one. Otherwise, the uninstaller from the older versions will mess up with your new install. There are a gazillion files that are named the same and in the same locations as the new one.
Your best bet now is to uninstall ALL the Photoshop versions you have installed, including the newest one, one by one, then run the Adobe CS Cleaner Tool, then run Repair Permissions from Apple's Desk Utility, and finally re-install the latest version.
The other alternative, if your boot HD is large enough (very doubtful in case of a laptop like a Mac Book), is to leave all versions on it.
Your choice.

MAIL FREEZING SINCE INSTALLING YOSEMITE ON MACBOOK PRO 2011

Problems with mail program freezing since installing Yosemite on MacBook Pro 2011

When Mail freezes, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Not able to install office in macbook pro

not able to install office in macbook pro ,the problem is a version of software required to install this update was not found in this volume , tell me

There is no such thing as a free version of Microsoft Office. There are free open source clones such as Open Office, Libre Office and Neo Office. Actually, the last one used to be free. It now costs $10.

I cant install EFI for MacBook Pro 2.7

I cant install EFI for MacBook Pro 2.7
mac os 10.6.8
macbook pro early 2011 (C0******H2H)
it rebooted 3 times and did not install
Whats problem? Thanks
<Serial Number Edited by Host>

Courcoul wrote:
Requires MacOS X 10.7.3 Lion, latest version, to install.
The download wouldn't have occurred if Software update detected he had 10.6
It installed and rebooted three times, sot it's obvious it was intentional.
Usually firmware updates are for the hardware itself to fix things and to prepare for features of the next operating system.
You see, I have it too and I'm on 10.6.8 with a Early 2011, the reason I haven't installed it is because it's been constantly changing and causing people issues like this fellow.
EFI 2.1, then 2.2, then 2.3 and now it's 2.7? LOL

Ever since I installed Mavericks, my MacBook Pro randomly restarts.

Hi all... this is my first time here, so please be gentle ;-)
Ever since I installed Mavericks, my MacBook Pro just randomly restarts. It's been happening a lot, and I have zero idea of how to decipher the panic report. Can anyone lend an assist on this? Much thanks, in advance. Here's the report...
Tue Jul 8 21:16:03 2014
panic(cpu 2 caller 0xffffff801a8dbf5e): Kernel trap at 0xffffff801a8a3469, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x000000002e8ab028, CR3: 0x00000001cda0d08f, CR4: 0x00000000000206e0
RAX: 0x0000000000000001, RBX: 0x000000002e8ab000, RCX: 0xffffff803166d000, RDX: 0x0000000000000821
RSP: 0xffffff8124e73a80, RBP: 0xffffff8124e73ab0, RSI: 0x0000000023acea34, RDI: 0xffffff801ebac650
R8: 0xffffff8124e73b8c, R9: 0xffffff8124e73b8c, R10: 0xffffff8124e739f0, R11: 0x0000000000000200
R12: 0xffffff801ebac650, R13: 0xffffff801dab9000, R14: 0x0000000002a81000, R15: 0xffffff8030ed0a00
RFL: 0x0000000000010206, RIP: 0xffffff801a8a3469, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0x000000002e8ab028, Error code: 0x0000000000000000, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff8124e73710 : 0xffffff801a822fa9
0xffffff8124e73790 : 0xffffff801a8dbf5e
0xffffff8124e73960 : 0xffffff801a8f3456
0xffffff8124e73980 : 0xffffff801a8a3469
0xffffff8124e73ab0 : 0xffffff801a8952d1
0xffffff8124e73b50 : 0xffffff801a873628
0xffffff8124e73b70 : 0xffffff801a86c899
0xffffff8124e73bb0 : 0xffffff801a874fa2
0xffffff8124e73d50 : 0xffffff801a878864
0xffffff8124e73f20 : 0xffffff801a8dc39c
0xffffff8124e73fb0 : 0xffffff801a8f335b
BSD process name corresponding to current thread: Google Chrome He
Mac OS version:
13D65
Kernel version:
Darwin Kernel Version 13.2.0: Thu Apr 17 23:03:13 PDT 2014; root:xnu-2422.100.13~1/RELEASE_X86_64
Kernel UUID: ADD73AE6-88B0-32FB-A8BB-4F7C8BE4092E
Kernel slide: 0x000000001a600000
Kernel text base: 0xffffff801a800000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 1313246657923
last loaded kext at 1084681985049: com.apple.filesystems.smbfs 2.0.2 (addr 0xffffff7f9ccbf000, size 335872)
last unloaded kext at 743170783122: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7f9ccbf000, size 32768)
loaded kexts:
com.avatron.AVExFramebuffer 1.7
com.avatron.AVExVideo 1.7
com.apple.filesystems.smbfs 2.0.2
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.14.15
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.2.4f1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 2.6.1f2
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleLPC 1.7.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleMikeyDriver 2.6.1f2
com.apple.driver.AppleMuxControl 3.5.26
com.apple.driver.AppleIntelHDGraphics 8.2.4
com.apple.driver.AppleIntelHDGraphicsFB 8.2.4
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.GeForceTesla 8.2.4
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.4f1
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBCardReader 3.4.1
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.6
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.5.1
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.driver.AppleUSBHub 666.4.0
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleAHCIPort 3.0.0
com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.AppleGraphicsDeviceControl 3.5.26
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.DspFuncLib 2.6.1f2
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOSurface 91.1
com.apple.iokit.IOBluetoothFamily 4.2.4f1
com.apple.driver.AppleHDAController 2.6.1f2
com.apple.iokit.IOHDAFamily 2.6.1f2
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleGraphicsControl 3.5.26
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.nvidia.classic.NVDANV50HalTesla 8.2.4
com.apple.nvidia.classic.NVDAResmanTesla 8.2.4
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.4f1
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.7.0d11
com.apple.driver.AppleSMC 3.1.8
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.6
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.driver.AppleUSBMultitouch 240.9
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.6
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 630.35
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOEthernetAVBController 1.0.3b4
com.apple.driver.mDNSOffloadUserClient 1.0.1b5
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOUSBFamily 677.4.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1

Remove "Air Display" and see whether there's an improvement.
Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and (unless otherwise specified in this comment) I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking the Customize button, if there is one.
Back up all data before making any changes.
You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
WARNING: Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software.

Since I installed Lion my macbook pro keeps locking up. How can I fix it?

Since I installed Lion my macbook pro keeps locking up. How can I fix it?

Well you can #18 install Lion over itself and hope that fixes it
Step by Step to fix your Mac
You can revert back to Snow Leopard
How to revert your Mac to Snow Leopard
You can go through this list and attempt to fix your problem, but likely wind up going back to Snow Leopard.
Step by Step to fix your Mac

My USB hub driver is not installing on my macbook pro windows 7 partition ?

hey there, my USB hub driver is not installing on my macbook pro windows 7 partition .. any clue?

yes am talking about windows 7 on my mac pro ... i did the following troubleshooting steps but no use and still the device is not recognized.
       - i changed the usb port .
       - i changed the hub it self .
     - i seaarched online for the driver automatically
        - i searched online for the driver manually ie. hardware id ..
         - i checked the connections,,
anything else should i do ??

Problem Do A Clean Install on my Macbook Pro

Similar Messages

Maybe you are looking for