Problem doing a re-install of photoshop premiere 8

I had a problem with cursors in photoshop
elements and was advised (incorrectly) by adobe support to uninstall my products and reinstall.
I did that with photoshop elements 8 and was successful.
When I try to install premiere by double clicking the install.exe, it starts up for a few seconds and then nothing.
I can't find any type of install log to see if it encounters errors or what.
Anyone have any ideas or know where the install log might be found?
Thanks,
Don

Thought I would update how I solved the problem in case someone else finds these postings.
I finally just redownloaded the premiere and then did an installation and it all worked well.
This could be a case of operator error......
Thanks for the help.

Similar Messages

Installing Adobe Photoshop Premiere 2008

I need your help to install my Adobe Photoshop Premiere 2008 on to my Windows 7 operating system,
Thanks, Ralph

Hi, the only message I get is that when I place the Disk into the PC, hit Start, Hit Run and type in Setup.exe I get a message that states that this system does not recognize this software.
This Disk will not auto Install.
Thanks

Problem doing a fresh install of Mountain Lion on replacement blank drive

After a close call in which the internal drive on my late 2009 21.5" iMac needed repairs unexpectedly, I acquired a replacement drive (WD Black 2TB) on which I planned on starting fresh with a clean install of Mountain Lion rather than cloning the existing installation that went through so many upgrades over the past 3+ years.
I now have a perfectly bootable WD Black 2TB drive attached to the USB port of the iMac. I can boot from it, use the Recovery partition if I need to. My contacts and Safari tabs and bookmarks are synced up through icloud. I am even able to install traditional software. Everything appears to work fine except.... I cannot install any application acquired from the Mac App Store.
When I go to the purchased icon of the Mac App Store, all apps show as already installed. I read several articles suggesting holding the option key when clicking on the "Installed" button, unchecking the "automatically install applications bought on other macs" etc. to no avail. A call to Apple Care is requiring futher research. I am now reaching out to the community for advise.
A important hint here is that, for some reason, when I boot from my fresh ML install, that OS sees the internal drive as an extension if itself, and treats all Mac App purchases there as already installed. Using Spotlight to find any of the apps marked as Installed invariably points to the Applications folder of the Internal drive. I have been unable to 'disable' the internal drive or unmount it.
I would rather not swap the drives until I complete a full installation of the OS and applications and data on my new WD Black 2TB drive. But from what I can see, this appears unavoidable. I can't believe I am the first one to run into this situation, hence my call to this community.
Thank you for your assistance.

If it wasn't a Mac computer that originally came with either Lion or Mt Lion Pre-Installed by Apple when new you would not be able to connect to the Online Internet Recovery system. It is a Feature of the Mac EFI Firmware system. And it will only install whichever version of the Download only version of OS X that originally came on that system.
My MBP came with Lion Preinstalled. Even if I have Mt Lion installed on the hard drive the Online Internet Recovery system would always point my MBP to the Lion download as that was the original version of OS X that came on my Mac.
No real authentication needed. Since your Mac came with Mt Lion no matter what newer versionof OS X you ever install the OIRS will always point you to Mt Lion and ONLY Mt Lion.
It is something different, but not completely different, from the built in Recovery HD partition on the internal drive.
No worries as during the install of MT Lion on your SSD the installer will Recreate the Mt Lion Recovery HD partition on your SSD.

Problem when trying to install of Photoshop Elements 11

About halfway thorough the istallation the disc is shot out and a square listing about 8 Error DW050 some of them having to do with the lingusitics. HELP!

Uninstall PSE11 via the control panel to remover everything. Then start again. You could try by copying the disk contents to a new folder on the desktop and then install from the desktop.

When does the test time start? After installing the program? Or only after opening the program? background: I accidently installed the Photoshop test version, but O am still busy with testing Premiere Pro.

when does the test time start? After installing the program? Or only after opening the program? background: I accidently installed the Photoshop test version, but O am still busy with testing Premiere Pro.

Freialeben7 the evaluation period begins when you first launch the Adobe application you are wishing to evaluate.

Cannot install Adobe Photoshop and Premiere Elements 10

I am trying to load a new purchase of Adobe Photoshop Elements 10 and Adobe Premiere elements 10 on a new computer operating with Windows 7 32 bit operating system. The computer does not recognize the Instalation Disk and trouble shooting Microsoft says Disk burned with unknown Format. The same disk will read on an old Windows XP computer. This is a first time trying to load software. Any help with this problem???

If you are having a problem getting the disc to work, you can download the trial versions of the software from the page linked below and then use your current serial number to activate them.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
Photoshop/Premiere Elements 10:
http://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm l

When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

You can try downloading the 64 bit version. You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

Hi! I work with Photoshop/Premiere Elements 10 on my snow leopard (10.6.8) without problems since years. Now I want to move over to the new MacBook Pro (and lion 10.7.5) but only Photoshop runs on it, every Premiere version (I downloaded Elements 12 and f

Hi! I work with Photoshop/Premiere Elements 10 on my snow leopard (10.6.8) without problems since years. Now I want to move over to the new MacBook Pro (and lion 10.7.5) but only Photoshop runs on it, every Premiere version (I downloaded Elements 12 and further more) stops installation and shows Installation ERROR: ASU has quit unexpectedly, Media DB Error: 18. Please help!

run the cleaner and retry installing per, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Problem with Adobe Extension Manager CC. Does not show installed extensions.

Adobe Extension Manager CC does not show installed extensions for Photoshop CC 2014 or Photoshop CC so that I am unable to uninstall extensions. This means that I cannot install updates to extensions.

Hi JJ - thank you for getting back to me. I got onto an Adobe tech and we tried various things including re-installation of Extension Manager, which didn't fix the problem. We then updated Photoshop (I was one point release back) then re-installed EM and this has fixed the problem.
I did check online and quite a number of people seem to have had this problem, so I guess Adobe has fixed whatever bug was in there.
Thanks!
Robert

I'm having problems installing Adobe Photoshop Elements 12.

I'm having problems installing Adobe Photoshop Elements 12.
The problem is right at the end of installation, it (the Install Shield Wizard) says status is registering and then immediately does an action rollback.
The message I get is:
'The wizard was interrupted before Adobe Photoshop Elements 12 could be completely installed. Your system has not been modified. To complete installation at another time, please run the installation again.'
If anyone can offer some help, please, that would be great.
Thanks.
Grant.

This discussion has been moved from the Captivate forum to the Photoshop Elements forum.

Problems installing Adobe Photoshop Elements 9 - Rollback action issue.

Im having problems installing Adobe Photoshop Elements 9.
The problem is right at the end of installation, it says status is registering and then immediately does an action rollback.
The message "The wizard was interrupted before Adobe Photoshop Elements 9 could be completely installed. Your system has not been modified. To complete installation at another time, please run setup again."
I have also created a new administrator account and after rebooting tried to install it but with the same result. It appears to get to the end of the program install but falls over just before the Organiser install. There are no error messages. AV and surplus programs have been stopped. Desktop clean up run. XP machine well within required spec.
Any help would be greatly appreciated.
Thanks
Dave

Hi
Thanks for your reply. Antivirus and security software all turned off. I have tried all the solutions in the troubleshoot section but still having the same problem.
Much obliged
Dave

Want to install my Adobe photoshop/premiere elements 11 on new iMac.

New iMac does not have cd drive, but I want to download my Adobe Photoshop/Premiere Elements 11 on the new iMac. I have the serial number, How do I download?

Download from
Download Photoshop Elements products | 13, 12, 11, 10
Download Premiere Elements products | 13, 12, 11, 10
Install then enter your serial number when prompted.

Trying to install Photoshop premiere elements 12. Error:1

Trying to install Photoshop Premiere Elements 12. Get the following error.
Please uninstall and reinstall the product.
If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen.
Error: 1
http://www.adobe.com/support/
Have tried uninstalling and reinstalling, even tried using Revo-uninstaller to clear away the software to no avail.
Any help?

I don't know what kind of system info you mean? I am new at this. But I have a new computer and tried reinstalling adobe photoshop elements 12 & adobe premiere elements 12 and now both are not working.
The message says Configuration error and the error code is:- Error:1
It worked fine on old PC.
After Clicking ok another message now comes up saying:
A required application library failed to load and the product cannot continue. Please reinstall the application.
Which i have done.

Does Adobe still support Adobe Photoshop Elements 12 & Adobe Premiere Elements 12?

Does Adobe still support Adobe Photoshop Elements 12 & Adobe Premiere Elements 12?

No, but then they never do support PSE very much. What's the problem?

Installed Adobe Photoshop CS6 on MacBook Pro OS 10.7.5, now my DVD player does not work. Ideas?

I installed Adobe Photoshop CS6 on MacBook Pro, OS 10.7.5. Now my DVD player will not work. Any ideas?

Problem solved. Yes, it was a coincidence. The problem had to do with my DVD preferences, not the Adobe installation. Thanks for your reply.

Problem doing a re-install of photoshop premiere 8

Similar Messages

Maybe you are looking for