Problem doing noise analysis

I would like to discuss on the phone whats going on... trying to do a noise analysis on opmap and Multisim is not giving me what I expected.

Hello,
If you want to discuss this on the phone then give us a call
Kind regards,
Miguel V
National Instruments

Similar Messages

  • Noise Analysis - 1overf and id variables (Active Devices)

    The Noise Analysis option provides an output variable "xxN_1overf" (xxN is the device name, like qq1) for active devices (diodes, transistors).  In a circuit I am simulating the 1overf variable is the dominant noise source, but I don't understand/know what this variable is referring to (I'm suspicious its related to some sort of overflow threshold) - I cannot find a reference to a 1overf variable in any convetnional Spice manual, so it seems to be unique to Multisim.
    Also does anyone know if the "xxN_id" output variable is the shot noise component or the flicker noise component (or maybe the vector sum of these).  Spice normally differentiates shot noise from flicker noise by calling shot noise NSID (or NSIB/NSIC) and flicker noise is called NFID (or NFIB).  If, as I suspect, Multisim is just adding shot and flicker noise together, is there any way of splitting these out?
    Best regards
    Paul

    Hi,
    The 1overf is the flicker noise.   http://en.wikipedia.org/wiki/Flicker_noise
    The "xxN_id" noise is the shot noise due to the drain current.
    Hope this helps.   
    Regards,
    Tayyab R,
    National Instruments.

  • How can I isolate individual noise sources in a noise analysis simulation?

    When I do an noise analysis simulation I can get a total RMS value for the band simulated, or I can get a spectral plot.
    Is there any way to identify each noise source in the simulation and it's contribution to the overall output noise?
    I tried a sensitivity simulation and selected all variables for output and that may have given some of the info I am looking for.  Is that correct?  Or does it not include any of the noise sources that are present in the noise analysis?
    Thanks.

    Noise at the specified output node is the RMS sum of the contribution of all the noise sources multiplied by their respective gains between the sources and output.  To zero in on the most significant noise contributing sources you need to be able to see that summation before it just becomes one RMS number.  This could be done by turning on/off each noise source and re-running the simulation.  This would actually be a very easy thing to provide for the developers who have access to the source code that runs this simulation.
    I don't see a way to do that as it is, or to get any other form of a report of the various noise source contributions to the output.  -Unless selecting each noise source for output does that, but I would like to confirm if this is true or not.  What I don't want is to get the total noise at each of those source nodes as if they were the output instead of at the actual output node desired.  Is that a correct understanding of how this is implemented?
    I'm hoping I am wrong and the output will be as seen at the actual circuit output rather than at each source.  That would be the useful way to have it work.
    Now that I think about it I suppose I could create a simulation to test this, if there is no answer from other sources.
    Thanks.

  • HT5429 How long after you report a problem does it take for the fix to be picked up in maps?

    How long after you report a problem does it take for the fix to be picked up in maps? The street I live on is misspelled. It's shown as one word, but it should be two words. Maps cannot find the address when it is spelled correctly, so I have it purposely misspelled it as one word in my contacts, which helps for the most part, however it still tries to place my home on an entirely different street all together. Fortunately this new random street is at least close to where I live. When I used to spell my street correctly with two words, maps would try to send me to the next town over. So it kind of works, as long as I misspell my street, and ignore the fact that it is showing where I live to be a couple of streets down from where I actually live. I live in Connecticut - not in the most populated of areas, but not in the middle of nowhere either. Amazingly enough Google Maps will correctly find my address whether it's spelled with one words or two words. Google Maps also shows my apartment complex, which Apple Maps does not. I really wish Apple would just do a quick pass of the area to fix these issues. I’ve reported the problem several times, months ago. How long will it take for there to be a fix? I keep trying to use the Apple ecosystem, but Google is clearly the better solution for me.

    Apple does not do the GIS data for maps. That comes from 3rd party vendors like Tom Tom. I have read it takes some time to update map data. The only thing you can do is report it.
    Not to belittle your complaint, but on my end it is Apple that is clearly better. When looking at my house in Google, the satellite photo is more than 4 years old, and the Apple one is much newer. I can tell because of the condition of my home and the neighbor's. They had an above ground pool which was removed 4 years ago and it shows on the Google Map. I had remodeling and roof work done to my home that started 3 years ago and Apple's satellite view showed this work done, which took over a year to complete. I live in the middle of a block in a rural town. Both Apple and Google split the block into 100 parts and put my home close to the beginning of the block instead of where it actually sits. I've reported it to both Google and Apple and no one has changed. Just one of those things. But, keep your chin up, it will get corrected eventually.

  • How does one update Flash? I currently cannot watch videos on You Tube, it says I need to upgrade, I have no problem doing this on a PC.

    How does one update Flash? I currently cannot watch videos on You Tube, it says I need to upgrade, I have no problem doing this on a PC.

    If you're not using chrome you can just go to adobe's website (http://get.adobe.com/flashplayer/) and download the newest flash player.  You run the .dmg and then open the application, which updates flash.  With the latest version of flash there should be a preference pane within system preferences to allow you to change settings and check for updates.

  • When I enable imatch on my iPhone 4s it takes approximately 30 minutes before other data fills 13.2gb of usable data. This problem does not occur when I manually sync music to my phone. Is this a common bug, and if so; is there a fix?

    When I enable imatch on my iPhone 4s it takes approximately 30 minutes before other data fills 13.2gb of usable data on the phone. This problem does not occur when I manually sync music to my phone only when I access imatch. Is this a common bug, and if so; is there a fix?

    yes it is. you can sign out of itunes account then sign back in. use http://support.apple.com/kb/ht1311 to sign out.

  • I have a 17" Macbook pro with flickering red and cyan(blue) lines across the screen. The issue disappears temporarily when I tap on the computer, and the problem does not occur when I use external display or try to screen capture the problem.

    I purchased my Macbook (17") through a certified apple tecnition in August 2012, it was refurbished and the motherboard was completely replaced. I do a lot of photo editing, but I have been unable to do so because of the red vibrating lines that interrupt my screen. The issue disappears temporarily when I tap on the computer, and the problem does not occur when I use external display or try to screen capture the problem. I brought the computer back to the technition I purchased it from and he said that it was a problem with my fan, so I have two new fans but the issue is still occuring. He says he doesnt know whats wrong. Does anyone have any information on this issue?
    Here is an image of the issue
    http://www.flickr.com/photos/67839707@N08/8884847081/

    I recommend having your Mac serviced by someone competent. A force sufficient to "blow apart" the fans was clearly excessive and may have damaged the display cable, as well as any number of other problems.
    Dust is properly cleaned with a vacuum, preferably one designed for computer service, and they are not cheap.
    Compressed air should never be used. It just blows dust everywhere, often into places where it can no longer be removed.

  • On my new iMac, mail has no sound after waking from sleep.  If I select do not wake for network access in general preferences, the problem does not occur.  Anyone have an idea on how to fix this?

    On my new iMac, mail has no sound after waking from sleep.  If I select do not wake for network access in general preferences, the problem does not occur.  Anyone have an idea on how to fix this? Thanks --

    Same here on an older iMac since Lion. Thanks for the uncheck wake for network access tip though, it doesn't do it either in that case, I will leave it that way.

  • While doing risk analysis for profiles the web service is taking 20 minutes

    Hi All
    Iam using SAP GRC 5.2 ( As per clients requirement)
    Iam using  VirsaCCRiskAnalysisService web service
    For roles it is working fine
    But when iam doing risk analysis for profiles( S_A.DEVELOP and  S_CUS_CMP)  it is taking upto 20 minutes to give results back
    Is there any way in which we can reduce the time taken to fetch the results
    Thanks

    Hello Mph,
    This is mainly bcz these profiles are a bit heavy and have huge number of authorizations in each of them. Also since these are critical, these would be having a large number of risks which explains the reason for the delay.
    Now, besides what Harleen mentioned, what I would also recommend to you is to check the number of threads etc in the config you have done. These are the parameters which you can often change and update as per your requirements and have a great impact on the performance as well, without the need to deploy extra hardware, which is usually a pain for most organizations.
    Regards,
    Hersh.
    http://www.linkedin.com/in/hersh13

  • Problem doing a chart

    hi!
    I have a problem doing a chart, I have three columns: I have dimension department in X Axis and I have two measure columns.
    I have a view selector with each measure so...I have two charts. My problem is that I have to apply a filter and I need to show only departments that has a value more than 0. How can I apply this filter?
    If I apply a filter in answers two charts has the same departments and isn't true because each measure has different departments...
    Can you help me??
    Thanks!!!

    Hello!
    I know this type of filter.
    In my fx formula I have this code:
    FILTER(IFNULL("- Actual".Value, 0) USING ("Dim Concept".Concept = 'Number of Ships'))
    Then I have another column (Department) and I have to do a chart.
    I want to see only departments that has my first column > 0, but I have to apply this filter inside of my column because I have another columns with another concept...
    I mean, If I choose on my view selector Measure 1 I can see for example: 10 departments on X AXIS of my chart and If I choose Measure 2 in my view selector...I should see for example only 7 because another has 0 value...
    Is possible to get this???
    Thanks!!

  • I just downloaded the new itunes update, now I can't copying TV shows purchased from the library to my backup computer, it says the files are invisible. Never had any problem doing it until the update.

    I just downloaded the new itunes update, now I can't copying TV shows purchased from the library to my backup computer, it says the files are invisible. Never had any problem doing it until the update. I have a Mac Pro G5 OS 10.6.8. The desktop hidden files app doesn't reveal the TV shows.

    found a solution in a different discussion.. thank god.

  • Problem doing SFTP through ISDN

    Hi,
    I have a problem doing SFTP through ISDN, ISDN connection is not staying active throughout the duration of the file transfer, it drops after its timeout value even if data transfer is in progress and file transfer break at that point, this happens with sftp transfer only, other type of connection like telnet, rdp works fine. Intresting traffic list I have define is,
    access-list 112 permit ip host 10.10.10.9 any. All the traffic is orignating from IP address 10.10.10.9
    Any suggestion on that.
    Thank you
    Yamin

    This is a fairly common issue with ISDN dialers. The disconnect may be initiated by either side of the connection.
    If you are certain that all is OK on your end, it may be the remote side that initiates the disconnect.
    regards,
    Leo

  • Problem with noise

    As the topic sais I have a huge problem with noise with my new system.
    I built an AMD64 3500+ with MSI K8N NEO2 mainboard. I used my old Chieftec dragon chassie but I am experiencing a noisy machine now.
    I aint sure if it is the PSU (That was quiet on my old AMD XP 3000+) or the CPU Fan.
    Could someone point out a good and almost silent PSU and CPU fan that works good with this board?
    Thanks for all the help.

    I am just a newbie to the board - and I do take a couple of silly chances, but if you want to rule one of them sound sources out.....
    I would just un plug the CPU fan when the system first boots up (but not sure if the board would just power down if there was no CPU fan connected??
    I know I have had a couple of problems with my new board, and changing a few things (including the PSU) I found that the standard CPU fan is pretty damn quiet. (IMO)
    infact the noisiest thing in my system is the damn fan on the graphics card.
    but if you want to try something quiet have a look at something like this:
    http://www.quietpc.com
    Dave

  • My mouse is unable to access the top toolbar in websites and email with Firefox - this problem does not present in Windows XP or Internet Explorer

    My mouse is unable to connect with the top toolbar of my hotmail account and any other websites I visit using Mozilla as a browser. This problem does not occur when I use Internet Explorer

    The answer was perfect! I fixed the problem following the link. When I posted the question yesterday, I was not very optomistic that anyone would reply and/or help - but, I was wrong. The solution was quick and simple.
    Thanks very much!!

  • Having problems doing an iCloud backup it keeps showing the estimated time thing but the blue load bar hasn't budged in over a half hour is there a way to correct this

    Having problems doing an iCloud backup it keeps showing the estimated time thing but the blue load bar hasn't budged in over a half hour is there a way to correct this

    You might try a forced shutdown to begin with, hold down the top and home buttons together until the device shuts down, then restart it.
    First check that your device is correctly connected to the wifi/internet (settings > wifi)
    If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.
    If this doesn't help, try turning off some items for back up in a pattern to try to establish if your problem is being caused by specific data on your device.
    Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.
    More about iCloud v iTunes Back Up

Maybe you are looking for