Problem doing updates

First of all i have a 1st gen ipad. Whenever I try to do a update it tries to update and it looks like it is going to update for a second or two and then it stops and is like i never did it. It also does this when i try to reinstall an app i already purchased.so i connected it to itunes and synced it up and now in itunes it gives me an error message with error code 11111. Someone please help.
thanks

I have the same problem the last 2 days! I emailed iTunes Store Support and they answered me this:
"Apple is currently working toward a resolution for the issue you have reported. You will receive an email after the matter has been investigated and further information is available."
So we just have to wait...

Similar Messages

How does one update Flash? I currently cannot watch videos on You Tube, it says I need to upgrade, I have no problem doing this on a PC.

How does one update Flash? I currently cannot watch videos on You Tube, it says I need to upgrade, I have no problem doing this on a PC.

If you're not using chrome you can just go to adobe's website (http://get.adobe.com/flashplayer/) and download the newest flash player. You run the .dmg and then open the application, which updates flash. With the latest version of flash there should be a preference pane within system preferences to allow you to change settings and check for updates.

I just downloaded the new itunes update, now I can't copying TV shows purchased from the library to my backup computer, it says the files are invisible. Never had any problem doing it until the update.

I just downloaded the new itunes update, now I can't copying TV shows purchased from the library to my backup computer, it says the files are invisible. Never had any problem doing it until the update. I have a Mac Pro G5 OS 10.6.8. The desktop hidden files app doesn't reveal the TV shows.

found a solution in a different discussion.. thank god.

CS4 Master Collection - Problem Applying Updates

Hi
I'm running the CS4 Master Collection on Windows Vista Ultimate 32-bit, SP2.
Normally I have no problem applying updates to the various Adobe components when they become available, however for a while now I've been unable to instal an update that's reported as being available for Adobe Media Encoder 4.1.0.
If I run the "check for updates" manually I can download the update (reported as being 63.7MB) and when I attempt to instal it the installation process appears to run. It finishes after a while and the Adobe Updater reports "The Udating Process is Finished" in a single dialog box with a single button entitled "Quit" - which seems odd as "Quit" implies "finish earlier than planned", I'd have expected something more in line with "All done", something like "OK".
Anyway, when I run the check for updates again I'm told about the same update implying that it wasn't applied successfully.
I get this behaviour whether I run the update as an Administrator or not (all other updates for other products are applied without problem). I also get it regardless of whether or not I reboot the machine after trying to apply the update.
Does anyone have any suggestions on what could be causing the problem ? I couldn't find anything obvious or obviously relevant in any of the Windows event logs on the PC.
Thanks for any ideas
Steve

I am having the same problem. I found a forum that suggested this. Apparently it worked for some people, but not for me. Let me know if it does:
1. Start -> All Programs -> Accessories
2. Right-click on Command Prompt and select "Run as..."
3. Run as Administrator (even if you are logged in as Admin. You need to run in the Black Command Prompt, not the White one)
4. Run: regsvr32 JScript.DLL
5. Then run: regsvr32 vbscript.DLL
(dont forget the spaces, or it won't work)
6. Then try running the set up again
As i said, it worked for some on the forum, but not others (like me). Try it and see if works for you

HT5429 How long after you report a problem does it take for the fix to be picked up in maps?

How long after you report a problem does it take for the fix to be picked up in maps? The street I live on is misspelled. It's shown as one word, but it should be two words. Maps cannot find the address when it is spelled correctly, so I have it purposely misspelled it as one word in my contacts, which helps for the most part, however it still tries to place my home on an entirely different street all together. Fortunately this new random street is at least close to where I live. When I used to spell my street correctly with two words, maps would try to send me to the next town over. So it kind of works, as long as I misspell my street, and ignore the fact that it is showing where I live to be a couple of streets down from where I actually live. I live in Connecticut - not in the most populated of areas, but not in the middle of nowhere either. Amazingly enough Google Maps will correctly find my address whether it's spelled with one words or two words. Google Maps also shows my apartment complex, which Apple Maps does not. I really wish Apple would just do a quick pass of the area to fix these issues. I’ve reported the problem several times, months ago. How long will it take for there to be a fix? I keep trying to use the Apple ecosystem, but Google is clearly the better solution for me.

Apple does not do the GIS data for maps. That comes from 3rd party vendors like Tom Tom. I have read it takes some time to update map data. The only thing you can do is report it.
Not to belittle your complaint, but on my end it is Apple that is clearly better. When looking at my house in Google, the satellite photo is more than 4 years old, and the Apple one is much newer. I can tell because of the condition of my home and the neighbor's. They had an above ground pool which was removed 4 years ago and it shows on the Google Map. I had remodeling and roof work done to my home that started 3 years ago and Apple's satellite view showed this work done, which took over a year to complete. I live in the middle of a block in a rural town. Both Apple and Google split the block into 100 parts and put my home close to the beginning of the block instead of where it actually sits. I've reported it to both Google and Apple and no one has changed. Just one of those things. But, keep your chin up, it will get corrected eventually.

Problem in update snow leopard 10.6. 2 to version 10.6.4 on Imac 27 "I7

Problem in update snow leopard 10.6. 2 to version 10.6.4 on Imac
27 "I7
When do the automatic update of version 10.6.2. to version
10.6.4 when it comes to "Apple" and the hourglass to "think" that moment appears on the screen too fast some risks.
Does anyone know how to solve this? I happen to other customers?

Hi slbruilima
The best way to bring the system up to date from 10.6.2 is to download and install the 10.6.4 Combo Update from the following link. > http://support.apple.com/kb/DL1048
Dennis

Problem in Update statement using Execute Immediate

Hi All,
I am facing problem in update statement.
I am creating dynamic sql and use "execute immediate" statement to execute a update statement.
But it is not updating any thing there in the table.
I have created a query like :
update_query='Update '|| Table_Name ||' t set t.process_status =''Y'' where t.tid=:A';
Execute immediate update_query using V_Id;
commit;
But it is not updating the table.
I have a question , is execute immediate only does insert and delete?
Thanks
Ashok

SQL> select * from t;
                 TID P
                 101 N
SQL> declare
2     V_Id          number := 101;
3     Table_Name    varchar2(30) := 'T';
4     update_query varchar2(1000);
5 begin
6     update_query := 'Update '|| Table_Name ||' t set t.process_status =''Y'' where t.tid=:A';
7     Execute immediate update_query using V_Id;
8     commit;
9 end;
10 /
PL/SQL procedure successfully completed.
SQL> select * from t;
                 TID P
                 101 Y

White screen problem after updating to 1.1 firmware

My 2G iPod Nano worked fine with 1.0.1 and 1.0.2 firmware but after updating to 1.1 I get white screen everytime I turn it on after longer period of time. Turning the iPod off and then right back on makes it work again. I have done restore 3 times without effect. I even removed the firmware files so that iTunes downloads them again when doing the restore but that didn't work either.
Should I return it or wait for new firmware? Has anyone else had this problem after updating to 1.1?

Disconnect iPod and close iTunes.
Firmware files are in "Documents and Settings\username\Application Data\Apple Computer\iTunes\iPod Software Updates" folder.
You should still have the 1.0.2 files named "iPod_19.1.0.2.ipsw" and "iPod_19.1.0.2.ipsw.signature" in there if have you upgraded from 1.0.1 version.
Remove 1.1 files from the folder so that only those to files are in there.
Disconnect from network (I switched off my wlan) so that iTunes can't download the new version. Connect your iPod and do Restore, iTunes will now use the old firmware files because it can't connect to the internet.
Fujitsu Siemens Amilo M3438G Windows XP

Problem about updating to Mac OS X 10.5.3

Hi there,
I just bought my Macbook two months ago. I encounted a problem about updating it to the latest version of MAC OS X. The system reminded me to restart, I proceed. Everythig looked just fine until a poping up window shown "Mac OS X 10.5.3 pacakage can not be validated". Dose anyone know what did that mean? How can I update my little mac?

Hi Hummer,
First, welcome to Apple discussions.
To answer your question, your computer checks all downloaded updates before installing them. It does this to make sure it's got the entire file and that the update will install correctly. The fact that validation fails on your machine probably means the file did not download correctly.
To install 10.5.3, simply go to this website, download the "10.5.3 combo update" and then run it on your Mac: http://www.apple.com/support/downloads/

Connection problems after updating to iOS 5

Hello everyone,
I updated my iPhone 4 (bought it in June '10) to iOS5 a week ago like everyone else. Ever since then, I've been experiencing problems with pretty much anything that requires a data connection. It won't send messages, log in to Facebook or other communities or find any websites. I have to switch the phone off and back on and then it'll work for a while. Usually, the problem starts after I haven't the phone for 15 minutes or more. It just happened and when I checked the connections, I had full connection (five bars + 3G) to my phone provider and full connection to my wifi as well. Still, iMessage said my messages couldn't be sent, it didn't download new emails and Whatsapp Messenger wouldn't even connect. So far, I haven't experienced any problems with the phone connection, can make calls and haven't been told I couldn't be reached, so I think it's safe to assume the phone connection isn't part of the problem.
There weren't any problems while updating the phone and I haven't dropped it or anything since then. The only thing I noticed was that when setting it to auto-sync via iCloud, it slowed down my internet, so I switched that feature back off. Do you think this has caused the problem? Any suggestions to what I should do?

How long does the "waiting" message stay there? Does it eventually go away and the app loads or does it stay that way permanently?
The app store is temporarily being overwhelmed by purchasers of the new iPad trying to get apps onto their devices. This might be a reason for a long wait. But eventually you should be able to get the app if the extra use is causing the problem.
Did you try a reboot of your iPad? Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.
You might also have something else waiting to download that is causing the problem. Something like a podcast. Check all apps that download regularly to see if this is the case and delete those or terminate their download.
Have you deleted those apps that are waiting? Do that and then retry them on at a time.
Hope this helps.

Problems installing updates to all of ilife 08

I am having major problems installing updates to all of ilife 08. The updater recognises & downoads the updates, but after completeing the download reports an 'unexpected error'. This has been happening for weeks?

Saundg:
Can you give us some more info on your setup: system version, Quicktime version, iPhoto version currently running and the other iApps? Have you run Disk Utility to repair disk permissions and to verify the disk (and make any fixes that are reported needing fixed)?
You might try downloading the individual updater files from Apple's Downloads page and run locally.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

What cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?

what cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?

SSince Apple does not support downgrading the iOS I suggest you start a new question that gives a good title to a specific problem. Then in the body of the thread describe the problem in detail, tell us what steps you have tried so far to correct the problem, what happened, and what error messages you received.

Hlep.. Problem when updating aspx templates

Hi there, I-m having a huge problem when updating pages from
a .asp template, it replaces my 1 line of code
with <%@ Page Language="VB" ContentType="text/html"
ResponseEncoding="iso-8859-1" %> and errases the resto of the
attributes i have on each page, making it unfunctionable.
Does anyne know why the template when updating does that?
thanks for your help

Hi Suman,
The changes are getting lost when i logout and login back to SAP.
In Current session i am able to see the changes. But changes are lost as soon as i end up my session,
but this is happening only in case of template box width. All other changes are retained between my various SAP sessions.
So wanted to know if any other value is over-writing the template box width values.
Regards
Manpreet Singh

L355-S7902 and other vista machine same problem after updates

I swear I have had it with MS. After loading the recent 13 updates my vista installation on the Toshiba
and my desktop are now bringing up a Windows Installer message attempting to install something ???
after the first site is clicked. Research says my registry is corrupted. As usual if it is MS did it!!!!
This problem does not show up in the event log. Some say it is an annoyance others say potentially serious registry problem. All I know is that when I recently attempted to load SVC PK 3 on XP it was windows installer that
tanked that operation (forever as far as I am concerned).
Please advise,
Donna in AR
Will I ever just be able to sit down at my computers again without a problem appearing that requires hours?

I think I've found the answer. Opera!!!! It updates in the background and it does use Win installer.
No wonder it did not show up in event log except I did find it as simple inormation.
Thanks for your patience!
Donna

Iphoto can't be opened now after downloading updates. Message says, "Check with developer to make sure Iphoto works with this version of Mac OS x. Wouldn't update Iphoto when my husband was doing updates..

Can someone help me figure out how to get my iphoto open again. It says...Error message: "Iphoto can't be open because of a problem. " Message says, "Check with developer to make sure Iphoto works with this version of Mac OS x. Wouldn't update Iphoto when my husband was doing updates..

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

Problem doing updates

Similar Messages

Maybe you are looking for