Problem: Done, cancel, etc. buttons don't appear

XP, 2gb ram, CS4, opening .nef files
The files open fine. I can even make changes. But, there is no done or cancel button like my other computer has. How can I fix this? Thanks!
I searched the web and this forum.
I changed screeen resolution
Shifted screen down
Where the buttons usuallyappear there is just blank space.

Ok, only took an hour or 2 to figure this out.If you set the screen resolution after cs4 is open or leave a lower res setting the buttons do not appear. Just an empty space where they are supposed to be - They aren't below the screen level. If you set the screen resolution before cs4 is open then the buttons appear where the empy space was. Wierd, but I can live with that.Thanks!

Similar Messages

Layer Actions Missing OK, Cancel, Etc.

Snow Leopard 10.6.1 on 2.5 Ghz Intel MacBook Pro.
Using layers, for example, Curve Adjustment, the OK, Cancel, Etc., buttons are missing.
I call tech support. Got India Central ;(, and was promised I would receive a URL for instructions to de-install, and reinstall CS4 Extended.
Well, that's been 12 hours ago. I know they sure are busy over there ;>), but does someone here have suggestions as to where that URL might be on Adobe's site?
ADOBE TECH SUPPORT HAS BECOME AN ABSOLUTE JOKE!!!!
End of rant.

The CS4 interface has a different approach to adjustment layers. In CS3, a dialogue box popped up and you needed the OK, Cancel, etc. buttons to get rid of the box. In CS4, it's not a dialogue box, it's a panel so you don't need to OK anything, the adjustments will apply as you work and you can move in and out of the image and panel as you need to. There's also a reset icon on the bottom of the panel. So, the things that appear to be missing, are just, well, gone for good. They are there when you go through the image>adjustment menu, but then your back in a dialogue box.

SAVE button doesn't appear in Toolbar of Text Edit Control

Hai All,
I need to save the changes made to the text in my Text Edit Control, i know how to handle the Save command but my problem is the SAVE button doesn't appear in the Toolbar of the Text Editor. I have searched through the SDN but in all of those threads they already have the SAVE button and hence only the logic was discussed. But i need the SAVE button to appear in my Text Edit Control. Looking forward for your helpful answers.
Thanks in Advance,
rama

Hi,
Check the demo program SAPSCRIPT_DEMO_NOTE_EDITOR what ever you enter in the editor you get the text using method
call method note_editor->get_text_as_stream
importing text = notetab.

My Macbook pro often won't start up since I installed Lion, and I have to shut it down using power button. My desktop icons don't appear and the dock won't open. I only have the little circle of color spinning endlessly. What's wrong now!

My Macbook pro often won't start up since I installed Lion, and I have to shut it down using power button. My desktop icons don't appear and the dock won't open. I only have the little circle of color spinning endlessly. What's wrong now!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Since upgrade to v29, pinned tabs don't appear and sometimes all tabs don't appear and open menu button does not work

My pinned tabs don't appear at any start and at some starts, I don't see the bookmarks toolbar (I can restore that by removing it from view-toolbars and then reselecting it). when this happens, FF also does not show any tabs and the Menu button does not work.
I have tried various suggestions found on here like deleting the sessionstore.js and re-installing FF, also tried disabling hardware acceleration in safe mode and still have the same problems.
Am reluctant to reset FF in case I lose my favourites and Bookmarks, is there anything else I can try?

Firefox may not have closed properly.<br />
You can try to update to Firefox 29.0.1 to be released tomorrow (Friday) to see if that helps with this issue.
See also:
*"Hang at exit": http://kb.mozillazine.org/Firefox_hangs
*"Firefox hangs when you quit it": https://support.mozilla.org/kb/Firefox+hangs

Buttons/MC on timeline don't appear until mouse roll over in browser

Hello all,
I am experiencing some weird behavior with some moveclips and buttons on my video player; (as2)
http://websites.danielnwilliams.co.uk/crankmedia/
I have created a video player that has the scrubber/playpause button actually move with the position in the video. There are other links that appear when the main video is at a certain point. There seems to be 2 problems with it which I cant figure out what is going on...
-1st is that the scrubber is actually linked to the timeline (where the buttons are on) with the follwing code;
MovieClip.prototype.scrubbb2 = function (x)
var f2:Number = Math.round (this._totalframes * x);
this.gotoAndStop (f2);
For some reason the timeline starts from when the video is buffering, so its all out of sync with certain points in the video. But when you move the scrubber, the timeline seems to 'snap' into place and then all the videos line up. What have I done wrong here?!
-2nd is that the link buttons will not appear unless the mouse is over the flash video player on the webpage. If your mouse is out of the video player nothing appears when its meant to. as soon as you put the mouse cursor into the flash player the links (that are meant to be visible) appear instantly. Is there a way to make them always appear on time?!
Any help is greatly appreciated
Cheers
Dan

yes, you can use, add and remove cuepoints in as2 but that's not what you should do for a scrubber. you should use the metadata event to determine your flv's duration and use a loop (eg enterframe), to update the scrubber's position based on the duration and the netstream's time property.
when your scrubber is dragged, delete the enterframe loop and use the seek() method to direct the stream to the correct point.
you'll use a little algebra control your scrubber's position based on the netstream's time and you'll control your seek parameter based on the scrubber's position:
// to determine the seek time given the scrubber.dragbar position:
paramF(scrubber.dragbar,0,0,scrubber._width-scrubber.dragbar._width,duration);
// to determine the scrubber.dragbar position given the netstream time
paramF(scrubber,0,0,duration,scrubber._width-scrubber.dragbar._width);
function paramF(mc:MovieClip,x1:Number,y1:Number,x2:Number,y2:Number){
mc.m=(y1-y2)/(x1-x2);
mc.b=y1-mc.m*x1;

Printer Button don't appear in File - Configure Page in Windows 7

With Windows XP, making a new report I can choose a printer in File menu - Configure Page. Here I can choose the sized of the page, the milimeter of the border of the page, if the page is Vertical or Horizontal and also have a buttón for choose the printer whereby print this report.
The problem is that in Windows 7, inside of Configure Page menu, don't appear the buttón for choose the printer.
I tried with Crystal Report XI R2 SP4, SP5 and SP6.

I have tried with a Windows 7 32 bits with 32 bits drivers.
I'm going to put some images for show the problem.
1º - With a report open, I go to "Archivo" - "Configurar página" (File - Configure page):
http://img265.imageshack.us/img265/4991/cr1f.jpg
2º - The buttón "Impresora" (Print), is in Windows XP, but in Windows 7 32 bits don't appear this button:
http://img404.imageshack.us/img404/1570/cr2m.jpg
In Windows XP when click the buttón "Impresora" show this window where I can choose where print the report:
http://img804.imageshack.us/img804/8877/cr3g.jpg
Edited by: robertgarciakof on Oct 20, 2011 10:38 AM

To extend a clip I have `Show Fine Tuning controls' turned on in my iMovie 11 preferences, but the blue forward/backward buttons don't appear. To get the orange handle bar, is there a hotkey?

To extend a clip I have `Show Fine Tuning controls' turned on in my iMovie 11 preferences, but the blue forward/backward buttons don't appear. To get the orange handle bar, is there a hotkey?

That's a comment in the file. It has no effect at all.

I need help please , i try to use itunes but my iPhone don't appear on itunes, i try everyting ,dowwload itunes again restart computer and iPhone,restart running device support,etc.

i need help please , i try to use itunes but my iPhone don't appear on itunes, i try everyting ,dowwload itunes again restart computer and iPhone,restart running device support,etc.

Windows doesn't detect iPhone: http://support.apple.com/kb/ts1538
Mac: http://support.apple.com/kb/ts1591

I bought a new keyboard for my iMac (10.5) but the f1,f2,f3, etc. buttons don't work. Rather, f14 is the adjustment for brightness. How do I change it back to normal?

I bought a new keyboard for my iMac (10.5) but the f1,f2,f3, etc. buttons don't work. Rather, f14 is the adjustment for brightness. How do I change it back to normal?

Certain older Macs can't use later version Apple keyboards.
Various aluminum models were compatible with later model
G5 PowerMac and iMac, while the older could only use older
model keyboards. Third party USB keyboards from a variety
of makers other than Apple may work OK.
Be sure the Mac OS X is updated to the last Combo and
then see if there is any other software update is available.
Not sure now (years have gone by) if there was a firmware
update applicable to the older Macs so they could use later
metal keyboards. I'd found several white USB polycarbonate
Apple keyboards to work with most of the last PPC Macs;
and bought spares as available, metal / newer didn't work
with mine. Several white plastic ones can work w/ intelmac.
There were keyboard model numbers (Apple) noted to work
with aluminum PowerMac G5, while others that look other-
wise identical (except number on keyboard) did not work...
Too new, and they weren't supported. Worked w/Intel-Mac.
Good luck & happy computing!

I want to cancel my monthly subscription, there aren't any "Cancel plan" button or link for me. How can i cancel my plan. Don't send me the "help" page, i have received much useless advice from adobe. Just help me cancel my PLAN! THANK YOU.

I want to cancel my monthly subscription, there aren't any "Cancel plan" button or link for me. How can i cancel my plan. Don't send me the "help" page, i have received much useless advice from adobe. Just help me cancel my PLAN! THANK YOU.

Return, cancel, or exchange an Adobe order
or contact adobe support, http://helpx.adobe.com/x-productkb/global/service-ccm.html

Hi, I have recently updated my OS X to Maverick. when I did, my mail programme (Mail) will not open - for me only. There are 4 other users of the iMac, and they don't appear to have any problems.

Hi, I have recently updated my OS X to Maverick. when I did, my mail programme (Mail) will not open - for me only. There are 4 other users of the iMac, and they don't appear to have any problems.

First, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
Then move these files to the Desktop for now...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

I have Adobe Reader X version 10.1.12, the "Done Signing" button does not appear under "I Need to Sign" How to fix?

I have Adobe Reader X version 10.1.12, the "Done Signing" button does not appear under "I Need to Sign" How to fix? Or how to tell AR that I'm done signing?

... one possibility/answer you will find there: Re: Sign option is missing from my Adobe Reader X (10.1.3)

WD ABAP scroll bars and buttons don't appear

If I test a transaction and the control or scroll bars don't appear when I test the service via SICF, how can I modifiy it to ensure the controls appear in SAPGUI versus webgui?
Thanks
Mikie

>
mbrogan wrote:
> If I test a transaction and the control or scroll bars don't appear when I test the service via SICF, how can I modifiy it to ensure the controls appear in SAPGUI versus webgui?
>
> Thanks
> Mikie
What? I'm really confused by your question. Is it even about Web Dynpro ABAP? You are talking about SAPGUI vs. Webgui. What does that have to do with Web Dynpro ABAP?

I have enrolled for the apple developer program but apparently have the same account name in iBooks. I need to change the iBooks account but don't know how. Do I change my apple id? Will this cause me problems with iTunes etc etc?

I have enrolled for the apple developer program but apparently already have an account with iBooks, cant have this it seems.how do I change my iBooks account, is this the apple id for my iPad and if I change this will it cause problems accessing iTunes etc?

I guess nobody knows if the crash that occured was legitimate or not? Apple phone support could do nothing for me, so I guess I am left to drive 45 minutes to the nearest store.

Problem: Done, cancel, etc. buttons don't appear

Similar Messages

Maybe you are looking for