Problem downlaoding Photoship via CC

Trying to install the CC desktop application and Photoshop CC on my laptop Lenovo, 8 gigs of RAM, Win 7.0 64 bit, clean.
After numerous failed attempts, the Desktp Application finally installs. Photoshop installation begins and is interrupted by a message instructing me to close Bridge CC and re-try. Bridge is not only not open, it has NEVER been installed on this computer. NO other programs are open. My first attempt was weeks ago, I've tried numerous times with the same result. Kaspersky on or off, same result.
I have CC installed on my desktop, and updates are almost as frustrating, taking numerous attempts before they are successful. That machine is clean, Win 7 64 bit 16 gigs of fast ram. Repeated attempts finally end in success on that machine, but I have not run across the "Close Bridge cc" problem on tha machine, just the laptop.
Any suggestions on getting this to install on my laptop?
Wayne Emery

yes that is the problem… ! Photoshop CC was uninstalled… and so, I can't load it again. All the other applications are ok
thank you

Similar Messages

Problems migrating data via LSMW using the IDoc method

Hello everybody,
I got a very strange problem migrating data via the LSMW. I tried to map legacy data using the IDoc mapping method. I'm using the message type 'CRMXIF_PARTNER_SAVE_M ' and the basic IDoc type 'CRMXIF_PARTNER_SAVE_M01'.
I can read the import data and convert it to IDoc structure as well as generate the IDoc. When I start processing the IDoc afterwards I get always the same error messages which I don't understand...
The errors are:
1) Error status 'A ' calling validation service (Status 51)
2) Validation error occurred: Module CRM_BUPA_MAIN_VAL , BDoc type BUPA_MAIN (Status 51)
3) Error_Time Dependency_Addresses CHECK_TABLE_MISSING (Status 51)
4) Internal error when calling operation module BUA_CHECK_ADDRESS_VALIDITY_ALL : Check table missing (Status 51)
5) Address moves ignored in the case of time-independent systems (Status 51)
6) Partner data processed with key PartnerGUID 4BF67ADE9B9923BEE10000000A3500DB (Status 51)
7) Partner (4BF67ADE9B9923BEE10000000A3500DB ): the following errors occurred (Status 51)
I tried to import the following data:
external ID
Name1
Name2
Address data
Telephone data
Fax data
Website data
Can anybody tell me where those errors come from and how I can fix them. Would be great if somebody could help me!
Thank you and best regards,
Markus

so apparently my issue with this was setting the time zone in the Address to the time zone of the user doing the conversion. You can find the time zone in SU01.
Also you can create a BP in the WebUI then check t-code SMW01 and it will help you on passing the values to CRMXIF_PARTNER_SAVE
Edited by: Akeem Lockett on Jul 8, 2010 7:44 AM

Problems Capturing Video via FireWire

I have had problems capturing video via firewire on my MacBook Pro. It is an early 2008 model. I have tried capturing video using multiple programs, cables and cameras. In both Final Cut Express and iMovie ('08 and '09) I loose the connection mysteriously. It just stops sensing my camera mid capture. I can shut the computer down, programs down and cameras down but nothing seems to work consistently in getting it to work. The weird part is that it does work some times. Recently I tried an auto capture of a whole miniDV tape through a sony handicam via iMovie '09. It got 20mins of the tape then stopped and rewound the tape. When trying it again it read "connection error". I could not get it to work. I put the computer to sleep and came back later. It worked but only captured about 10 minutes then shut down the whole camera and import completely. I switched to manual import and it will now only let me capture about 20 seconds at a time. What is going on? To me it seems like the port itself is malfunctioning and disconnecting the signal randomly. Has anyone else experienced this? What is the cause and what can I do about it?

I've been reading the forums and it seems that there is an issue with the Firewire port in general. I have an external firewire 800 HD and when copying large files or a large number of files the HD gets dismounted unexpectedly. Your case seems similar in that we are both transferring large files via Firewire. Anyone have any fixes for this?

HT4864 Problems sending email via icloud

I am having problems sending email via my iCloud through Mail or Sparrow, I have checked the mail server settings and they are correct based on what is described on the Apple site. Anyone else having this problem?

For some reason, iCloud smtp servers haven't been working well over the last couple weeks. I have experienced this twice, in as many weeks. Very frustrating as I send numerous emails on a daily basis via my iCloud account. If I login through the browser, the sending works fine, but via Mac Mail...no go. Very irritating to say the least. Apple, please fix this fluctuation problem.

Problems with sending via url

Hi there, I've got a problem with sending via an URL. If I send and receive something I use a method called connect. This method works well, I construct a URL, connect and receive an ObjectStream.
But as I only want to set some values in another use case I do not want to receive anything,
But it doesn't work - my servlet does not receive any request.
Could anyone please help me to solve this?
Thank you.
Regards
Tarik
private synchronized static void connectOneWay(String data)
            throws IOException, ClassNotFoundException {
        try {
            URLConnection connection = null;
            URL testServlet = null;
            Class classLock = ServletConnector.class;
            while (locked)
                classLock.wait();
            locked = true;
            testServlet = new URL(servletURL + data);
            if (MMSCMSTree.debug)
                System.out.println("Servlet URL: " + testServlet);
            connection = testServlet.openConnection();
            connection.setDoInput(false);
            connection.connect();
            locked = false;
            classLock.notify();
        } catch (InterruptedException e) {
            e.printStackTrace();
        }

Hi
There was not a problem with this, the problem was on the server side, infinite loop ... :-)
Regards
Tarik

I have a problem sending mail via smtp. I use a satellite system and the average return time for a ping is 675ms. Is this a problem with mail? If so can I change Mail to accept it. The problem also exists with Lion

I have a problem sending mail via smtp. I use a satellite system and the average return time for a ping is 675ms. Is this a problem with mail? If so can I change Mail to accept it. The problem also exists with Lion and on both my MacPro and my wife's Imac. I also see my mailboxes randomly disconnecting and reconnecting. Any other ideas of a possible cause?

I solved it myself, after the "note" which came back from FF/Mozilla just as I finished my message, commenting on what it was that my system had , I wnnt back to check my plug-ins etc. I downloaded the latest Java, BOTH 32bit AND 64 bit versions and latest Firefox.
Now all is working.
Thanks,
B.

Is anyone having problems downlaoding new update for window

Is anyone having problems downlaoding new update for window

You ought to be very pleased with that MacBook. 16 GB memory and a 512 GB SSD is a very robust configuration that should serve you well for many years.
Mavericks runs extremely well on a MacBook Pro with a quarter that amount of memory.
Since Mavericks is free it doesn't really matter if it or Mountain Lion is installed when you buy it. You really should purchase Macs from the Apple Store since they won't be any cheaper anywhere else, and that is the only way to buy one with absolute assurance it has not been misused or improperly stored.
You can order a Mac configured with custom options on a Sunday evening and it can be on your desk that Wednesday morning. Shipping is free.
I have no idea why anyone would by a Mac from anyone other than Apple, but they do. Complaints from those who buy Macs from "big box" resellers appear on this site in disproportionate numbers, for reasons that are not clear.

Problem submitting RFEBKA00 via Job

Hi experts
I have a requirement to create a Z program to upload 3 different files by using RFEBKA00.
For this purpouse, I have created a Z program which creates 3 Z jobs (ZA, ZB, ZC one per file) using JOB_OPEN / SUBMIT program VIA JOB / JOB_CLOSE.
Once every job is finished, I need to read logs using BP_JOBLOG_READ,and if there are no errors, move files to other folder.
My questions are:
1.- When using JOB_OPEN and SUBMIT VIA JOB name NUMBER n, as far as I know n is the number returned by jobcount parameter from JOB_OPEN and should be the same for both jobs (the Zjob created by JOB_OPEN and the one created by program RFEBKA00).When I debbug the program, it is OK, but when accessing table TBTCO sometimes there are 2 different jobcounts. Seems that jobcount is created based on sy-uzeit and sometimes there is some delay between JOB_OPEN and SUBMIT. Is there any way to ensure both jobs have the same jobcount?.
2.- As I need to read the log for each file, and because of the fact that the job created by submitting RFEBKA00 has always the same name, if the answer to my first question is NO, how can I link each of my Z jobs with its corresponding RFEBKA00 job?.
Many thanks in advance for your answers.
BR,
Carlos.

Hi Thomas
Thanks for your answer.
For your first question, there is not BD key problem beacuse of my job is ZJOB and the one created when doing submit via job is RFEBKA00-EXTR.CTA.EL. (standard job) have different names.
But job number should be the same, because I'm using JOB_OPEN (which return the job number in parameter jobcount) and SUBMIT VIA JOB .
For the second question, and based on SAP documentation about SUBMIT , when submitting a program vía job, the submitted program is executed as a background task, which means creating a new job, so the answers is yes, the standard program schedules a new job.

Problems starting GlassFish via GlassFish Tools

Hi everyone,
I am experiencing problems in starting a GlassFish Server (Open Source Edition 4.1 (build 13)) via GlassFish Tools in Eclipse Luna on my MacBook (OS X Yosemite) as described in these postings. The server is stuck at 69 % on starting up until a TimeoutException appears.
The problem can be solved though by going back to an older version of GlassFish tools (it seems 7.3.2.20141114 is the last version which is working for me).
On my Windows PC no such problems occur, even when running GlassFish tools in the latest version.
Is anyone experiencing similar issues and might provide a hint to fix this?
I really appreciate any help in this matter .
Thanks,
Erun

Hi Erun
I have exactly the same configuration and exactly same problem. Do you still remember how did you solve this problem?
kind regards
Aliye

Problem consistently printing via new (summer 2011) AIRPORT EXTREME BASE STATION and Brother wireless printer (model HL5370DW). What am I doing wrong?

Thanks in advance for any help you folks can offer. I'm a newb here and will try to offer as much detail as I can about the dilemma at hand.
Scenario: Home network has been recently set up for wireless internet access via NEW Airport Extreme Base Station (purchased September 2011). Units accessing the network include: 2011 Macbook Pro, 2011 Macbook Air, 2007 Macbook, 2009 Macbook Pro, 2 iPhone 3GSs, and a 1st-gen iPad (and a partridge in a pear tree AEBS is configured to run WPA2 encrypted network, as well as a WPA2 guest network. I am attempting to yoke a BROTHER HL5370DW wireless B or G/ ethernet / usb-capable printer to the main network such that any and all units can print wirelessly or its equivalent (i.e., via printer hooked to AEBS through USB hub)
Problem: Despite configuring the Brother printer to recognize the main WPA2 network I created, I am unable to get wireless printing to work. My workaround was to physically connect Brother printer to AEBS via USB, specifically using a Belkin USB hub (after all, I wanted access to usb drives, as well as the printer). This workaround works ONLY SOME OF THE TIME. Generally, after a fresh boot of any computer or after a restart of the AEBS, any given computer will be able to print (i.e., any computer wirelessly connected to the main WPA2 network recognizes the printer). HOWEVER, at random times, printer access is gone (as is access to USB drives connected to AEBS's usb hub). Wireless networks are still up and running when that happens. IS THERE A WAY TO GET THE USB HUB's devices (i.e., printer and usb drives) to ALWAYS REMAIN AVAILABLE AS LONG AS THEY STAY CONNECTED TO THE AEBS? In other words, what accounts for the intermittent loss of the usb peripherals?
Sometimes, I just shut the airport off on whatever computer is having this problem, and the problem goes away. Sometimes, the problem is present across all computers in the house, sometimes only a few are affected. I can ALWAYS see the AEBS in the Airport Utility if the AEBS is connected to the particular computer via ETHERNET CABLE.
My theories:
- true wireless printing (i.e., without usb hub workaround) doesn't work because the N network somehow isn't backwards compatible with the Brother printer, which, i believe, is B/G. Although...isn't Wireless N networking supposed to work with BG devices? I did find a thread (https://discussions.apple.com/thread/2570774?start=0&tstart=0 ) that explains some of the particulars of WPA2 encryption and Wireless B/G issues, but it was beyond my level of comprehension (I'm a psychologist, but not an Apple Genius
- The usb workaround is only intermittently viable because of some flaw in the Airport or Airport Utility that causes dropouts to happen when a Macbook Pro or Air's lid gets closed or one gets opened after having been at a different network (e.g., at my office).
QUESTIONS:
- Should I try to use my old router (7 year old Linksys WRT54G) as an access point and connect the Brother printer to that G-router? How do I do that?
- I wouldn't mind just relying on the usb hub method if I could just insure more consistency (i.e., no random dropouts of peripherals). How could I do this?
Rule out:
- wireless printing works on my printer - it was being recognized back before the AEBS. I had the Linksys router running a WEP network and had the wireless printer talking with no cables to the router and the computers. (I just don't want to revert to using WEP encryption given its lack of security and my trying to protect HiPAA related health information on behalf of patients)
Any help will be greatly appreciated.
Thanks in advance!

13 ASCII characters = 104 (aka 128)-bit WEP
encryption
If turning off WEP works, then you just need to
provide the cameras with the "Equivalent Network Password".
One of the problems with WEP is that the actual
standard relies on a 10 character HEX key for 40bit
WEP and a 26 character HEX key for 128bit WEP.
In order to make things easier, vendors use certain
algorithms to convert simple alphanumeric passwords
(or passphrases) into HEX keys, thus enabling the use
of simple easy to remember WEP password rather than
lengthy HEX keys. The problem is that different
vendors use different algorithms to generate the HEX
key and therefore a ASCII password on an AEBS will be
hashed differently on a non-Apple client and vice
versa.
You may find the following article helpful:
- Apple article, especially the part about
"Third-party client to Airport".
Brilliant idea about trying the system with No encryption on... that DID solve the problem... almost.. once I turned off the encryption option, and restarted the Airport, I got a dialog box showing that the "Base station needs attention" but it didn't indicate WHAT kind of "assistance" it needed. Nonetheless, I closed out of the Airport program only to find that the indicator light, which had been Green, was now, flashing Yellow and I could not connect anything, including my computer. I opened the Airport program again and found the ONLY way I could get the Green light on was to select some sort of encryption option... then the light would go Green again but my cameras would not hook up again, and when I went back in and ONLY changed the option to NO encryption, I got the yellow flashing light and the "this base unit needs attention" warning...
I think your suggestions are almost on the mark... is there any way of reconciling the WEP coding between the cameras and the Airport??? Or turning off the encryption option and STILL have Airport work?
Thanks again for your help and suggestions... I really appreciate it.
geoff

Problem accessing mail via Safari browser

How do I access iCloud Mail via my Safari browser on my iPhone? If I go to iCloud.com it just offers me the option to install it on my phone.
The problem is, I already have it installed on my phone and it works fine EXCEPT at my new job - the wifi is not very good and I can access internet/Facebook etc but every time I try and load email it always says it 'cannot find the server .' I therefore tried to access email via safari browser - my other email provider works fine that waybut iCloud doesn't even give me the option to login, just keeps suggesting I install it.
Any ideas how I can check iCloud email at work? Can't do it on work computers, site is blocked....and there is no 3G/4G signal.
Thanks for any advice!

According to http://support.apple.com/kb/PH2618 you should be able to access it via a browser by going to https://www.icloud.com/#mail

Problem using image via URL

Hi everybody
I have a problem with loading images via URL into my PDFs.
I am using LCD ES2 Version 9.0.1....
I want to create a PDF which loads images from the internet but it does not work.
So far I have tried to add an image or image field to my PDF in the LCD and populate that image using the Object-->Field-->URL: palett. I put the URL in there like this http://www.adobe.com/imageshome/pdfgift_home.gif , tick the "embed image Data" checkbox (also tried with without that just to be sure) and save as Dynamic PDF (I also tried static) but when I open the PDF in adobe reader 9 or 10 or acrobat 9 there is no image showing. I also put the image in a subform and made that subform flowed, as well as the page itself and made the binding global.
I have the form properties - default set to "Acrobat and Adobe Reader version 9.0 or higher", Default Language to JavaScript, PDF Render format to Dynamic PDF.
I also tried using JavaScript events like "form:ready ImageField2.value.#image.href = "http://www.adobe.com/imageshome/pdfgift_home.gif" as discribed here http://partners.adobe.com/public/developer/en/tips/lc_dynamic_images.pdf but that also does not work.
What am I missing?
Any help would be great and greatly appreciated!!!
Thanks and best regards
Norbert

As far as I can tell, this use case is not allowed because of cross site references related security concerns. The form can refer to the images stored on the same server from where the PDF is served, but the images cannot come from external servers.

Problems projecting W530 via mini-displayPort to HDMI TV

I am having problems attempting to project to a TV connected via HDMI to my W530 using a mini-DisplayPort to HDMI conversion cable. The TV goes into an initializing connection mode then states unsupported format. I have tried discrete and Optimus video modes in the BIOS, but for the life of me I cannot project to my HDMI TV. Any ideas?

What cable or adapter are you using? I have no need for that particular conversion so I have not tried, but if I were going to, I would probably use http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802&p_id=5311&seq=1&for... for starters.
Usually monoprice products work well enough and their prices rock.

Problem receiving email via Jetpack

I invested in a Jetpack 4620L last June (2012). When installed on my Dell laptop running windows 7, MS Outlook reported a "send/receive problem" and was not receiving email....send was fine. If I connected via an alternate WiFi service, send and receive worked flawlessly. If I then switched back to Jetpack, email worked perfectly and remained so until I had to reboot when Outlook again would report a "send/receive error" since Jetpack was my default connection. I reported the problem to Verizon tech support who escalated it all the way to the manufacturer and told me it was a known problem and they were working to correct it. That was months ago and I had not heard back from Verizon when I called last weekend on tech support again with no success. Has anyone else encountered this problem?,,,or better yet, found a solution they would be willing to share? They are suggesting it is a Microsoft problem but my instinct and exoerience suggest that, if this were so, Outlook would not behave normally when I connect via an alternate WiFi service, i.e., the connection should not determine the performance of Outlook if it is configured correctly initially. Help???

I have the same problem. After I upgraded to 4.0.2, Yahoo Mail has stopped pushing emails. I downloaded iTunes 10 and synced last night and the effect was worse. I have not received a single email since this morning. I logged on to Desktop Yahoo and I have plenty of new emails. Same thing with Gmail, I did not receive any despite actually having some new ones.
I deleted the email accounts and set them up again and still no luck. I turned off the phone and back on and still no luck.

Problem with printing via HTC one

Good morning
I have a problem with my printer device (HP Photosmart 2575 All-in-One)
When i try to print out from my cell phone i recieved a message at the printer lcd display "operator involvement".
This happened after an upgrade to my mobile phone from sense5 to sense6. The type of my moblile is HTC One Mini.
Before this upgrade everything work correct.
can you help me with this?
best regards

Hello milosath,
Welcome to the HP Support Forums!
I would like to see if I can help out with the HTC printing issue. Ensure the printer is connected to the network via the Ethernet cable, download and install the HP ePrint App and try printing from there.
Getting Started with HP ePrint Mobile Apps<---
Cheers,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Problem downlaoding Photoship via CC

Similar Messages

Maybe you are looking for