Problem due to serial no profile maintenance

Dear experts,
                    I have the problem as follows,
1)The user had problem with the material u2013 the GR was not able to do with mb31, there was msg . u201CSerial no. obligatory for the material xxxxu201D  this material was SFG. as we dont use serial no. to SFG.(With serial number profile Z005) & no stock posted to storage location.
2)I have removed the Profile status obligatory (03) & use status none(01) instead of in IOS2 for profile Z005.
3)The user problem has solved at the time.
4)There was new problem created, during mb31 system doesnu2019t ask serial number. In this condition some GR has done without serial number.
5)I again put the status obligatory instead of none.
6)System again reverts to normal. It asks serial number at the time of mb31
7)But during this phase what the GR has done without serial number must required to reverse.
8)But as serial number profile is activate. Now how to reverse the GR OF MB31?
9)By MBST not able to process the document.
Hoping reply soon,
Thanks & regards,
Manish K. Bachate
Edited by: manish bachate on Dec 27, 2011 11:03 AM

Dear sir,
               It was the mistake by the person who created the material. awhich identifies later.
So you mean that i have to make system at previous stage i.e 01 insted of 03 & reverse the docs., & then revoke again .
I am also rech at that conclusion.
well tring & revert to you back.
Thanks & regards.
Manish

Similar Messages

  • My macbook pro was repaired and since then i can't get nor photoshop or bridge to initialize. a window appears that says it has  initializing problems due to an icc profile issue.

    my macbook pro was repaired and since then i can't get nor photoshop cs5 or bridge cs5 to initialize. a window appears that says it has initializing problems due to an icc profile issue.
    there appear two error messages. the first one says that there has been a problem sincronizing because of a programme error. the second one appears after you clicked ok on the first window and says that photoshop couldn't be initialized because the icc profile is invalid.
    does anyone know if i have to delete any system or photoshop preference? the illustrator is also having troubles. thanks

    thanks! what finnally worked better was renaming the «settings» folder in te «color folder» in the library with ~before the name. now indesign is asking me for thw icc profiles but still works, so i asume i can reinstall color settings only for indesign and go on.

  • Problem with *serial no. profile* in work sheduling view of material master

    Hi ! !
    I am here with a problem with serial no. profile in work sheduling view of material master.
    By mistake for some FHMI type ( PRODUCTION RESOURCE TOOLS )materials, serial no profile exist in 'work sheduling' view. Due to that we are facing problem in GRN.
    when I am trying to remove that with MM02. i m getting a message as Serial numbers already assigned to this material
    Please suggest how to remove serial no. profile.
    Thanks in advance,
    Prab

    Hi,
    go to MMBE and check the Current Serial number...for  FHMI type
    and go to IQ02 and close the Serial number range at the Current number range...
    Now you can assign this serial number range to another material type...
    Thx
    Raju

  • Maintenance of serial number profile for a material

    Hi,
    We need to maintain serial number profile for a material. Presently there exists stock for this material.
    Could you please let us know the prerequisites for maintaining the serial number profile for a material where stock exists.
    System should not allow to update the material with serial number profile if stock exists, since for the existing stock serial numbers are not available. But in our case, system is allowing to update the profile for the material where stock exists. Could you suggest if any setting/config is missing to throw an error.
    Regards,
    Srinivas

    I have the solution below.
    - Don't change Serial no. profile
    - Goods issue all stock with mvt 201 or 261 into temporary cost object and note your text.
    - Change Serial no. profile in material master
    - Goods receipt all stock (You may ref. material doc.) and you need to input serial number for all materials.
    Hope this solution can help you.
    Edited by: Saiyaman on Dec 9, 2009 5:33 PM

  • User-Exit for Serial Number Profile / Equipment creation

    Hi ,
    In the Material Master Data , we have a serial number profile and at the time of
    Post Good Issue , the system do generate an equipment record in the Service Module .
    That is standard SAP and working very well .
    For some customers (Inter-Company) customers we do not want any Equipment record in the Service Module to be created .
    What standard SAP functionality or user-exit can we use in order to not create the Equipment record in the Service Module ?
    Regard's

    Transaction SPRO
    Plant Maintenance and Customer Service --> Master Data in Plant Maintenance and Customer Service --> Technical Objects --> Serial Number Management --> Define Serial Number profile
    In the Serial number profile, go to Serializing procedures. The EqReq field determines whether an equipment is to be created or not. For e.g. 01 in MMSL implies that equipment will not be created during GR,
    Not sure whether this will satisfy your requirement. Will need more information for that...
    Hope this helps,
    Lakshman

  • Number Ranges for the Serial Number Profiles

    Hi All,
    We wanted to trace the Goods movement based on the serial numbers. we could make this possible by attaching the serial number profile with relevant procedure (Stock Chk) to the Material.
    Now the issue left out is of Number range and the pop-up for the existing serial numbers for the material. Is it possible to define Number Ranges (Ext. / Int) to the Serial Number profile ? Also, to get a pop-up for the serail numbers of material currently in Stock, which can be issued. Currently, I have to get the detail of sr. No. thru' IQ09 / IQ03.
    Pls advise.
    Shekhar.

    Hi,
    Yes. In IMG under Plant maintenance -- > Technical objects -->Serial No profile.
    Here you can create diff profile with difff procedures.
    And mention the properties of each.
    There is a material master record for each type in the system. For control purposes, the company wants to know which customer received which collector type, and which serial number(s) of the collector type were supplied to the customer, when the individual solar collectors were delivered.
    It is therefore necessary to assign a serial number to the customer delivery in addition to the material number.
    A serial number master record is created with the assignment of the serial number. You can maintain data fields specific to the serial number in the master record.
    At a later date, it may be necessary to enter equipment master records for materials that have already been serialized and delivered to customers, for example, if the producer of the solar collectors also has to perform maintenance activities for the customers and therefore wants to use all the functions available in the equipment master record for a serialized material.
    In order to keep this option open at any time, you must define a number range for serial numbers. The numbers assigned from this number range are not the serial numbers but reserved keys that stand for the combination of material number and serial number and the equipment number that may possibly be assigned.
    You can also define one or more serial number profiles.
    The serial number profile defines how and under which conditions a serial number is assigned for a material.
    Note
    A material can only be assigned serial numbers after the required serial number profile has been entered in the material master for a specific plant.

  • Serial Number Profile in repetetive manufacturing :-

    Hi all ,
    I have a issue related to use serial number profile in repetetive manufacturing industry.
    In my client scenario there is  one finished good product which is produced internally inside the plant where repetetive manufacturing scenario is using by using 'mfbf' or 'mf42n' transaction.In this both we are doing GR & GI posting together in one shot.
    Here one more scenario is that, one semifinished good is also consuming while manufacturing the finished good(repetetive) & the same semifinished good is produced in different plant by descrete manufacturing & consumed in this plant where repetetive is going on inside the finished good.
    In both the cases they want to use serial no.
    1. For semifinished good which is a finished good for a plant & then transfered or sell to different plant .
    2. For finished good manufactured by repetetive method.
    Here the problem is after getting the stock of semifinished good i have got the serial no. & then transfered the same serial no. to the new plant . at the time of manufactre finished good system is asking serial no. for finished good & consuming the semifinished good but here i also want to consume or capture serial no. of semifinished good.
    How to consume this serial no. of semifinished good , means pop up should come for both the material finished good & semifinished good.
    I am using two different serial no. profile for both the product with stock check indicator as 2.
    Serializing procedure for semifinished good :- MMSL  03 01 & PPSF  03 01
    Serializing procedure for finished good        :- PPSF  03 01
    I would be highly thankfull to you if you provide the best solution .
    Regards
    Piyush Sharma

    please check here (may be it will help a bit):
    http://help.sap.com/saphelp_47x200/helpdata/en/dd/f8c814b3f911d1896e0000e8284931/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/8a/a5aa004adc11d189740000e8322d00/frameset.htm

  • Problem with updating serial numbers in sales order!

    Hi,
    I am trying to update serial numbers for a sales order in SAP. I tried using both SERNR_ADD_TO_AU and SERNR_ADD_TO_DOCUMENT. However, in both cases the FM returned the number of serial numbers created but these did not reflect in the sales order. The code for both is as below:
    WA_SERXX-SDAUFNR = '0000001733'.
    WA_SERXX-POSNR = '000010'.
    WA_SERXX-KUNDE = '0000009000'.
    WA_SERXX-VBTYP = 'C'.
    WA_SERXX-SD_AUART = 'OR'.
    WA_SERXX-SD_POSTYP = 'TAN'.
    WA_SERNR-SERNR = '000000001234ABCDAR'.
    APPEND WA_SERNR TO IT_SERNR.
    WA_SERNR-SERNR = '000000001234ABCDAQ'.
    APPEND WA_SERNR TO IT_SERNR.
    CALL FUNCTION 'SERNR_ADD_TO_DOCUMENT'
      EXPORTING
        operation                       = 'SDAU'
        objkopf                         = 'SER02'
        serxx                           = wa_serxx
        material                        = 'P1-TEST'
       PROFILE                         = 'Z001'
        quantity                        = '2'
      M_CHARGE                        =
       J_VORGANG                       = 'PMS2'
      KMATNR                          =
      CUOBJ                           =
      R_MATERIAL                      =
      BSTCH                           =
      BSTUP                           =
      SNBWG                           =
      EMATN                           =
      KDAUF                           =
      KDPOS                           =
      AUTOMATIC                       = ' '
      NO_ENQUEUE                      = ' '
      MORE_ALLOWED                    = ' '
      BUDAT                           =
    IMPORTING
       ANZSN                           = anzsn
       NEW_OBKNR                       = new_obknr
       SERIAL_COMMIT                   = serial_commit
       STATUS_NOT_ALLOWED              = status_not_allowed
      tables
        sernr                           = IT_SERNR
        r_sernr                         = it_ser1
      XVBPA                           =
    CHANGING
      T_SMESG                         =
    EXCEPTIONS
      KONFIGURATIONS_ERROR            = 1
      GENERAL_SERIAL_ERROR            = 2
      NO_PROFILE_OPERATION            = 3
      DIFFERENCE_IN_HEADER_DATA       = 4
      OTHERS                          = 5
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    commit work and wait.
    CALL FUNCTION 'SERNR_ADD_TO_AU'
      EXPORTING
        sernr                       = '000000001234ABCDAR'
        profile                     = 'Z001'
        material                    = 'P1-TEST'
      M_CHARGE                    =
        quantity                    = '1'
      J_VORGANG                   = 'PMS2'
      KMATNR                      =
      CUOBJ                       =
        document                    = '0000001733'
        item                        = '000010'
        debitor                     = '0000009000'
        vbtyp                       = 'C'
        sd_auart                    = 'OR'
        sd_postyp                   = 'TAN'
    IMPORTING
       ANZSN                       = ANZSN
      ZEILEN_ID                   =
       SERIAL_COMMIT               = SERIAL_COMMIT
    EXCEPTIONS
      KONFIGURATIONS_ERROR        = 1
      SERIALNUMBER_ERRORS         = 2
      SERIALNUMBER_WARNINGS       = 3
      NO_PROFILE_OPERATION        = 4
      OTHERS                      = 5
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    COMMIT WORK AND WAIT.

    hi,
    In order to maintain customer specific serial numbers you can do the following steps:
    1. Maintain the serial numbers provided by your client in tcode IQ01. this will create the customer serial numbers in the system.
    2. In the material master under Sales View maintain the serial number profile as 0002. this is sap standard.
    3. Once the above has been maintained you can assign serial numbers at the time of delivery and NOT in sales order.
    I hope this helps.
    Regards,
    Vishesh

  • Serial Number Profiles based on sales order movement types.

    Hi,
    I am trying to config. serial number profiles based on specific movement types in sales order.
    So as usual,i have created Serial number profile with Serial Procedures including MMSL.
    I have assigned this procedure MMSL to Movement type group created by me.
    And similarly i have also assgined this movementype group to specific movement type which i need to use.
    But the system asks serial number for all movement types inspite of me speciifying specific movement types to be triggered.
    Have anyone faced this situation. Could you pls help me?

    Hello Diwakar,
    Thanks for ur suggestion.But,i found it is possible in the following thread
    Serial Number Profile and assigning to movement types
    And moreover we have an option to define serialization atttributes for movement types in plant maintenanace.
    i followed the similar step,but it was'nt working.
    Could you please chk it and let me know your suggestions

  • Problem in importing SAP Exchange profile (BASIS settings) - Urgent

    Hi,
    I am currently facing problem in importing SAP Exchange profiles manually.
    When i enter into http://<J2EE_host>:<J2EE_port>/exchangeProfile with username as PISUPER, the page is getting loaded but
    <b>1.</b>it shows a error message stating, Name or password is incorrect
    <b>2</b>. When i ignore that error and proceed with the connections tab to edit the server settings, i cannot set the password for PILDUSER. It again says, Name or Password is incorrect..
    What could be the reason for these errors. Please help me... This is very urgent....
    Thanks in advance,
    Rose

    Thanks for your response guys. I checked for PISUPER and PILDSUPER in SU01 and checked for lock but it shows an error message saying User doesnot exist.
    Kindly let me know how to procced on in this case.
    Thanks and Regards,
    Rose.

  • Serial Port Profile (SPP) and Object Push Profile (OPP)

    I just bought a new Blackberry Curve 8320. And am having several difficulties with it which I will list separately.
    With other phones (like the Motorola RAZR V3t) I could send contacts from my Pocket PC HP iPaq via Bluetooth. When I try to do this with the Blackberry, the Pocket PC says that it cannot connect to the Object Push Profile (OPP) in the remote device (which is the Blackberry).
    With other phones (like the Motorola RAZR V3t) I could dial contact from my Pocket PC HP iPaq via Bluetooth. When I try to do this with the Blackberry, the Pocket PC says that it cannot connect to the Serial Port Profile (OPP) in the remote device (which is the Blackberry).
    Please and Thanks in advance for your help.
    Kudos! Thanks!

    Luisfigueredo,
    Please do not post the same thread twice.
    See my response in relation to your bluetooth question on ur previous thread.
    http://supportforums.blackberry.com/rim/board/message?board.id=8300&message.id=9228#M9228
    If your issue is resolved, put a checkmark in the green box that contains the resolution.
    OR
    If it was just/or also really helpful - Give it a Kudos.. Go on Mate.. Help the rest of the clueless blackberry user world find their answer too..
    ~Gday from Down Under~

  • Mobile circuit problem due to technical problem wi...

    i bought nokia C3 with one year warranty.
    once it had some problem due to water falling on it..i repaired it with other agency.
    after some time its circuit was short and it stopped working..when i consulted nokia care for the same,they were not ready to take the responsibility for the same..
     this is my second Nokia mobile in which i had a loss..of around INR 6000/-
    i can't bear this amount every time..i suggest you to take a corrective action and pls do the needful..ASAP..so that i can have a clear idea about the further action to be taken against you.

    How is Nokia Care responsible if you got your set repaired at non Nokia care place(voids terms of warranty) after spilling water on it ( which also voids terms of warranty)?
    Please mark the post as solution if it solves your problem.
    Current Device - Nokia Lumia 1020/920

  • Remove serial number profile

    I would like to remove a serial number profile in the material master for a material that does is no longer handled as serialized.
    During trying to remove the serial number profile in the respecitve material a system-error message occurs telling "Serial numbers already assigned to this material" and it refers to report RISERNR9.
    Could you please tell me the required steps (e.g. remove stock? / change each serial number status?) that are required to realize this? Is there a OSS note available that descripes the approach?
    Thank you in advance!

    Hi,
    Please execute the serial number profile removal process and see.  Material serial number removal procedure as follows.
    Using T-Code MM02-change material code to the respective plant(6000),storage location,sales org and then give input data to the material view screen basic data1, basic data2...... In the view Plant data / Stor.2 input screen General plant parameters options Serial no.profile - '0001', SerLevel - '1' data to be removed during change/edit of the material. After that doing MIGO for the material serial number should not asked and also not displayed.  set the deletion flag in IQ02,  archive the serial number history using archiving object PM_OBJLIST,  archive the serial number using archiving object PM_EQUI. Please execute these steps and check. Hope it works. Thanking you.

  • Material; Serial Number profile check

    Dear All.
    We've recently upgraded from ECC 5.0 to ECC 6.0.
    In 5.0 we used to receive a warning message if someone tried to create a serial number for a material which did have a serial number profile.  The message was "Material not allocated a Serial Number Profile".
    It was only a warning message, but was still helpful.
    Now in 6.0 we're not getting that message.  SAP is letting us create the serial number even though no profile has been assigned in the material master.
    Does anyone know if there's been a change made between 5.0 and 6.0?
    If this is configurable?
    Other tips?
    Many thanks!

    Hi,
    Ecc 6.0 also if you are not assign serial number profile it will give warning message.
    below the message number will display as warning.
    Material not allocated a serial number profile
    Message no. IS160
    Please check with ABAPer.
    SAM

  • How to cancel serial no. profile from material master ?

    dear all SAP experts,
                I have 1 mateial in which i assign serial no. profile in work scheduling view in material master. So how can cancel serial no. profile from material master ?
    Suggest me
    regards,
    Nitin Nerkar

    As long as no serial numbers exist for the material you are able to cancel or change the serial number profile.
    As soon as serial numbers exist for the material and you want to change or delete the serial number profile, you must note the following:
    The previously assigned serial numbers are no longer suited to the current serial number profile.
    The indicator for the stock check may have changed. If this is the case, you can copy the profile settings in the serial number using the executable report program RISERNR9. However, you should only start this program once the changes have been updated in the material master record.
    You can no longer delete the serial number profile in the material master record. Instead of this, you create a serial number profile without serialization procedures in Customizing and enter this in the material master record.

Maybe you are looking for

  • How Do I Change The Color Of Part Of A Vector Image In CS6?

    I have created a shape using the rectangle tool. I have then selected a section of this using the Marquee Tool (I get the running ants) but how do I change the color of the selection? I have been following a few tutorials where they say press Control

  • SQL plus username, password, & hoststring

    Hello, I downloaded and installed oracle 8 lite, and then I open SQL plus , they require user name, password, and host string. I don't know what they are. Please tell me about that. Thank you very much for your help. Have a nice weekend. null

  • Help With Dynamic PL/SQL LOV Syntax

    Hello I am trying to create a dynamic pl/sql lov in Oracle Apex 3.2 on 11g. I am having some issues with the syntax of the statements below and I'd appreciate any suggestions. DECLARE BEGIN IF :p3_current_a_workshop != 0 THEN RETURN 'select distinct

  • Internal drive failing

    ok, help. . .i have been having problems all morning & ran a scan with disc utility & come to find out one of my 4 internal drives is failing s.m.a.r.t. it shows up as a drive on my desktop, but i cannot access it nor try to back it up with carbon co

  • I am really confused about the so many versions of Mozilla Firefox and whcih version is the best ???

    Iam using now Firefox 10.0 but iam not sure whether it is the latest version or even the best one ??