Problem during 11.1.0.7 clusteware upgrade when runnng post upgrade script

Hello,
I have encountered a problem whilst upgrading a 3 node RAC cluster to 11.1.0.7 patchset as follows :-
I ran OUI against the CRS_HOME to upgrade to the 11.1.0.7 patchset. The upgrade completed successfully across all nodes.
OUI then prompted to run the post install script (_root111.sh)_ as root user on each of the 3 nodes in the cluster, so I did the following (in SERIAL order as recommended):-
NODE1 - ran crsctl stop crs
ran root111.sh script
Both the above actions completed on NODE1 with no problems
NODE2 ran crsctl stop crs
ran root111.sh script
'Text file busy' error received on several files during execution of root111.sh script on NODE2 (This may have been due to the fact that CRS processes had not fully stopped when I invoked the script). The result was that the script did not complete successfully (linking , etc) and CRS did not start up afterwards.
NODE1 - ran crsctl stop crs
ran root111.sh script
Both the above actions completed on NODE3 with no problems
The result of all the above is that clusterware on NODE2 is in an inconsistent state and CSS and its dependent processes cannot start . What I need to know is how the best way to get out of this situation and complete the upgrade to 11.1.0.7 on all 3 nodes of the cluster. Can I somehow deinstall clusterware on Node2 and reinstall it again independently of Nodes1 and 3 ???
Any help or advice would be greatly appreciated !
Thanks,
Shaun

Hello ShaunH,
Take a look on Metalink note 754095.1 This note may helps u.
Regards,
Rodrigo Mufalani
http://mufalani.blogspot.com

Similar Messages

Curve 9300 error message: there was a problem during installation. Please try again when using app world

hi
I have a curve 9300 using os 6 and the latest app world 2.1.1.. something
when i try to download apps it initiates the download then after a couple of seconds after starting it shows the error message "there was a problem during installation. Please try again"
i have tried ALL the suppourt forums (KB26671 and KB30074) and suggestions/threads and called my network but none have worked.
these were reinstallign app world, making a new blackberry id as the other email address was associated with an old blackberry, security wiping the phone then restoring it and entering the new bb id, changing the date to 2014 and then hard wiping the phone and restoring it
i have twitter, facebook and bbm ect apps but these are RIM made i think and already preinstalled. everything else on the phone works fine
i have tried both wifi and network internet and battery pull
i really dont know what else to try or who else to contact to fix it. very annoying paying for a service you cant even use!
any help or more ideas would be great!
thanks

Hello carckberrypie,
In this case i would recommend wiping the BlackBerry smartphone. To do this we would need to back up the BlackBerry smartphone http://bit.ly/aSediX
Once backed up please follow the link below to perform a security wipe of your BlackBerry smartphone.
Link: http://www.blackberry.com/btsc/KB14058
Test the BlackBerry smartphone and proceed with a selective restore as outlined below.
Link: http://www.blackberry.com/btsc/KB10339
Thank you
-DrP
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Upgrading Oracle Text - Post upgrade step 10.2 to 11.2

I already upgraded my 10.2.0.4 database to 11.2.0.1 and have to do post upgrade steps. In step 39 of Manual guideline (837570.1) is not clear for me. If some one can explain further would be appriciated. When i check my source ORACLE_HOME/ctx/admin/ctxf102.txt or ctxf102.sql
Step 39
Upgrading Oracle Text
Copy the following files from the previous Oracle home to the new Oracle home:
* Stemming user-dictionary files
* User-modified KOREAN_MORPH_LEXER dictionary files
* USER_FILTER executables
To obtain a list of the above files, use:
$ORACLE_HOME/ctx/admin/ctxf<version>.txt
$ORACLE_HOME/ctx/admin/ctxf<version>.sql
where version is 920,101,102
For instance, if upgrading from 10.2.0
*1. For dictionary files check*
*$ORACLE_HOME/ctx/admin/ctxf102.txt*
*2. Execute the script as database user SYS,SYSTEM, or CTXSYS*
*$ORACLE_HOME/ctx/admin/ctxf102.sql*
If your Oracle Text index uses KOREAN_LEXER which was deprecated in Oracle 9i and desupported in Oracle 10g Release 2, see below Note for further information on manual migration from KOREAN_LEXER to KOREAN_MORPH_LEXER.
Note 300172.1 Obsolescence of KOREAN_LEXER Lexer Type

Hi Srini
Thank you very much. now i got it.
Oracle asked me to identify the CTXCAT indexes with KOREAN_LEXER execute the following query as user CTXSYS: if nothing return then i can skip this step.
SELECT idx_name
FROM ctxsys.ctx_indexes
WHERE idx_type = 'CTXCAT'
AND idx_name IN
(SELECT ixo_index_name
FROM ctxsys.ctx_index_objects
WHERE ixo_class = 'LEXER'
AND ixo_object = 'KOREAN_MORPH_LEXER ');
SELECT isl_index_owner,isl_index_name,isl_language
FROM CTXSYS.ctx_index_sub_lexers
WHERE isl_object = 'KOREAN_MORPH_LEXER';

BW upgrade - pre and post upgrade reports

Hi All
Quick question please.
We plan to upgrade our BW ABAP system from NW 731 SPS7 to NW 740 SPS6.
I read the ASU toolbox note 1000009 and can see that there is no file for our scenario i..e from 73X to 740 so note 1734333 is the way to go here when prompted for ASU toolbox run. However within the note 1734333, it states "This note requires that all pre-requisites for the BW-related system copy automation are met according to note 1707321". When i read 1707321 it talks about installation procedure for PCA which is part of LVM, a licensed software. We don't have this license. Hence I am wondering if note 1707321 is applicable for us at all or is it that this note would bring about changes in the system and sets up a staging area upon which the Z report from the other note(1734333) builds and then creates task list for pre and post upgrade. I am certain that we will have to implement Z report from note 1734333 however the reference to note 1707321 has created some confusion.
Also once we implement the Z report from 1734333, the note says, the report needs not be transferred but the objects generated need to be. Would the author here referring to reports - SAP_BW_BEFORE UPGRADE and SAP_BW_AFTER UPGRADE and having them recorded into a transport. Any thoughts here please. If the author is indeed referring to these reports only, how do we know this will show up in quality systems via STC01 as input options.
Regards
Kalyan

I re-read the note again, It says, If task manager content notes(1707321) are not applied, we will not see reports for stopping RDA Daemons and Process chains i...e report RS_SYSTEM_SHUTDOWN. However we are on NW 731 SP7 so we already have this report. This means we can go ahead with implementing the Z report from 1734333 and forget about the other note. Have I comprehended it correctly
Regards
Kalyan

Are all user automatically upgraded when on user upgrades software

We have 4 different users on our computer with separate log ins. I would like to upgrade to Yosemite. If I do the upgrade on my user log in, does it automatically upgrade for the other users or can they choose not to upgrade under their log in?

Only one upgrade for one machine. All your users will be using Yosemite if you upgrade.

Encounter a problem during upgrade sap r/3 4.7 to ecc6

Hi expert:
i encounter a problem during upgrade sap r/3 4.7 to ecc6
in START_SHDI_FIRST step.
here is the error msg~
MSSCRESPDEFN.LOG
Msg 2812, Level 16, State 62, Server Jack, Line 6
Could not find stored procedure 'dbo.sap_upg_getrelease'.
setuser
i checked MS SQL DB and found out that i only got 'erp.sap_upg_getrelease' but not dbo owner.
can any one tell me how to solve this problem?~
thanks.
Regards
Jack Lee

It's the kernel for the shadow the correct?.
Regards,
Alfredo.

TP version problem during upgrade from 4.7 sr2 to ECC6

Hello All,
i am doing an upgrade from 4.7 to ECC6 (ultimately i have to upgrade to EHP4). I am stuck in phase PREPARE module Initialization finished with status failed #. Below is the error i am getting. before pasting log file i tried my best to uprade TP level by upgrading the Patch level. but its not taking effact in to SAP system. If i check TP version in STMS >> system >> Check TP tool it shows me old version.
below is the error log excerpt from file CHECKS.LOG
 #====================================================#
Requests and information for module Initialization #
 #====================================================#
ERROR: The upgrade needs a patched version of R3trans which is
 build on 21.06.06 or later.
 The R3trans in your active SAP kernel is either older or
 the version could not be determined. Call it without
 any option to determine the build date.
 If the build date is too old, you have to replace it
 before you can continue the upgrade.
 Download the latest executable available from the SAP service
 market place and update it before you continue.
 Otherwise, the upgrade tools will be corrupted.
INFO: The version check of the disp+work in your active SAP kernel
 determined that it has a sufficient level.
 No update of disp+work is necessary.
ERROR: The upgrade needs a patched version of tp with version
 number 340.16.05 or higher.
 The tp in your active SAP kernel is either older or the
 version could not be determined. Call it without any option
 to determine the version.
 If the version is too old, you have to replace it before
 you can continue the upgrade.
 Download the latest executable available from the SAP service
 market place and update it before you continue.
 Otherwise, the upgrade tools will be corrupted.
ERROR: To be able to use ASU Toolbox, your system requires
 the ST-PI software component with at least Support Package Level 8
 After the update is done, the module must be repeated!
 For more information, see the upgrade documentation
INFO: The upgrade strategy for the addon ABA_PLUS
 is described in note: 632429
INFO: The upgrade strategy for the addon APPINT
 is described in note: 632429
INFO: The upgrade strategy for the addon BP-R3PF
 is described in note: 632429
INFO: The upgrade strategy for the addon FINBASIS
 is described in note: 438521
INFO: The upgrade strategy for the addon LSO
 is described in note: 503468
INFO: The upgrade strategy for the addon LSOFE
 is described in note: 503907
INFO: The upgrade strategy for the addon PI
 is described in note: 700779
INFO: The upgrade strategy for the addon PI_BASIS
 is described in note: 555060
INFO: The upgrade strategy for the addon SLL_PI
 is described in note: 1306751
INFO: The upgrade strategy for the addon ST-A/PI
 is described in note: 69455
INFO: The upgrade strategy for the addon ST-PI
 is described in note: 539977
INFO: The upgrade strategy for the addon WP-PI
 is described in note: 632429
 #===========================================================#
PREPARE module Initialization finished with status failed #
 #===========================================================#
i downloaded the 47 kernel files SAPEXEDB_304-20001172.SAR and SAPEXE_304-20001172.SAR and installed the kernel file. if i check TP version from command level it shows me 340.16.62, but in SAP STMS it shows me 340.16.03. Can somebody explain what shoulkd i do?
Can i know also if i can update SAP Kernel from 4.7 sr2 to NW7.0 without upgrading even started?
If somebody can tell me the exact number of CDs to use to upgrade from 4.7 SR2 to ECC6 EHp4, that would be very
nice.
Mani

Hi Mani,
ERROR: The upgrade needs a patched version of R3trans which is
build on 21.06.06 or later.
ERROR: The upgrade needs a patched version of tp with version
number 340.16.05 or higher.
show that the tp and R3trans used by the source 470 system are old.
You should download the latest tp and R3trans for kernel 470, and
replace the old tp and R3trans with the downloaded ones under the 470 kernel directory. The 470 kernel directory is specified by parameter DIR_EXECUTABLE which is usually /usr/sap/<SID>/SYS/exe/run.
Please note that there is also a kernel directory under /<DIR_PUT>/<SID>/SYS/exe which is for the the target system 700. Please do not replace tp and R3trans under this directory with the ones downloaded for kernel 470.
NO, you cannot update SAP Kernel from 4.7 sr2 to NW7.0 without upgrading even started. Kernel upgrade will be done by SAPup automatically.
With Best Regards
Julia

There was a problem during installation of blackberry messenger. Please try again

There was a problem during installation of blackberry messenger ( any application). Please try again, this is the message i get anytime i try to download or upgrade any application on my blackberry bold 9870. pls i need your help
Thanks
bellokeshi

bellokeshi wrote:
Blackberry appworld version: 4.0.0.63
OK, that is almost the latest version... .65 is later.
You can upgrade your AppWorld from using your BlackBerry browser to go to www.blackberry.com/appworld
After you upgrade, Do a simple reboot on the BlackBerry in this manner: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot.
IF then you don't see or can't find the AppWorld icon, please post back here.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

IDVD having problems "during multiplexing/burning"

Help please:
iDVD is not burning DVDs for me.
it goes through the whole process seemingly fine, then at the end shows the error message: "problem during multiplexing/burning".
I have a G4 emac. 800 Mhz 10.3.9
external Lacie dvd burner (that burns fine on wife's imac)
I was having this problem earlier, then erased the hard drive to start clean. Didn't seem to help.
I upgraded the Lacie driver, etc too.
thoughts?
R

Ah then if Toast has a connection issue and iDVD is having issues when burning, it would appear that your issue is unrelated to iDVD and instead a system or hardware problem. Unfortunately that might be too hard to diagnose here in this forum, at least not with a ton of non-iDVD related back and forth questions and answers.
Did you play the disc image on your computer to see if the titles made it into the disk image? My guess if they didn't make it onto the DVD blank, then they are not in the disk image either, although maybe they were?
Patrick

Problem during restore from a file

Hello guys,
I'have a big problem during restore a backup, the situation :
I want to upgrade my iPhone from 4.0.2 to 4.3.3
I make a encrypted backup (I know password ...) of the old version -> ok no errors
I upgrade iOS -> ok
When I want to restore the version I ve just backup -> it crashs : iphone restart and error appears "the Iphone was disconnected" ... (it works fine with an older backup of december 2010 ...)
I try to unistall / reinstall iTunes, it's the last version -> same problem
I try one a another machine (Windows 7 and XP) -> same problem
The logs :
[4896 @ Mon Jun 20 22:33:02 2011] [com.apple.console AppleMobileBackup.exe] Unable to move temporary file "C:\Users\***\AppData\Roaming\Apple Computer\MobileSync\Backup\Logs\MobileBackup-unknown-20110620-223302-Restore-Co mputer.log" (3)
[4896 @ Mon Jun 20 22:33:02 2011] [com.apple.console AppleMobileBackup.exe] Unable to move temporary file "C:\Users\Hamad\AppData\Roaming\Apple Computer\MobileSync\Backup\Logs\MobileBackup-10b66065f7dbf1da28658fd7fbeb7b128a 871760-20110620-223302-Restore-Computer.log" (3)
[4896 @ Mon Jun 20 22:33:02 2011] [com.apple.console AppleMobileBackup.exe] WARNING: Restoring 10b66065f7dbf1da28658fd7fbeb7b128a871760 from 10b66065f7dbf1da28658fd7fbeb7b128a871760-20110619-224423
[5564 @ Mon Jun 20 22:34:09 2011] [(unknown facility) iTunes.exe] AMDServiceConnectionReceiveMessage (thread 3352): Could not receive size of message: 0 No error
[5564 @ Mon Jun 20 22:34:09 2011] [(unknown facility) iTunes.exe] _read_thread (thread 3352): Could not receive message: 0xe8000001
[4896 @ Mon Jun 20 22:34:10 2011] [com.apple.console AppleMobileBackup.exe] ERROR: Connection to device lost (com.apple.MobileBackup.ErrorDomain/200)
[4896 @ Mon Jun 20 22:34:10 2011] [com.apple.console AppleMobileBackup.exe] ERROR: Restore error: -10
I want to restore at least my contacts, sms and photos, the issue was the backup is encrypted that why I cant't acceess directly to the concerned files ...
Can somebody help me?
Thanks

Hello, I had the same problem with my notebook (HP Envy 15) and iTunes 10.5 after install iOS 5. The restore backup fail and show the next text:
[4428 @ Mon Oct 17 00:44:41 2011] [com.apple.console AppleMobileBackup.exe] Unable to move temporary file "C:\Users\Dani\AppData\Roaming\Apple Computer\MobileSync\Backup\Logs\MobileBackup-unknown-20111017-004441-Restore-Co mputer.log" (2)
[4428 @ Mon Oct 17 00:44:41 2011] [com.apple.console AppleMobileBackup.exe] Unable to move temporary file "C:\Users\Dani\AppData\Roaming\Apple Computer\MobileSync\Backup\Logs\MobileBackup-71f0bc4bbd4f76087135ff002d3b0c7f6b 85ee0f-20111017-004441-Restore-Computer.log" (2)
[4428 @ Mon Oct 17 00:44:41 2011] [com.apple.console AppleMobileBackup.exe] WARNING: Restoring 71f0bc4bbd4f76087135ff002d3b0c7f6b85ee0f from 71f0bc4bbd4f76087135ff002d3b0c7f6b85ee0f
[4428 @ Mon Oct 17 00:44:41 2011] [(unknown facility) AppleMobileBackup.exe] _AMDDeviceAttachedCallbackv3 (thread 3008): Device 'AMDevice 004EFAA8 {UDID = 71f0bc4bbd4f76087135ff002d3b0c7f6b85ee0f, device ID = 1, location ID = 0x0, product ID = 0x1297}' attached.
[4428 @ Mon Oct 17 00:45:08 2011] [(unknown facility) AppleMobileBackup.exe] lockssl_handshake (thread 3008): SSL handshake fatal lower level error -1: SSL_ERROR_SYSCALL errno (No such file or directory)
[4428 @ Mon Oct 17 00:45:08 2011] [(unknown facility) AppleMobileBackup.exe] AMDeviceStartSession (thread 3008): Could not start session: kAMDInvalidPairRecordError
[4428 @ Mon Oct 17 00:45:08 2011] [(unknown facility) AppleMobileBackup.exe] _AMDNotifyHook (thread 3008): Could not load library SHLWAPI.dll from the AppleMobileDeviceSupport directory, C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\\SHLWAPI.dll.
[4428 @ Mon Oct 17 00:45:08 2011] [com.apple.console AppleMobileBackup.exe] ERROR: Error attaching to device
[4428 @ Mon Oct 17 00:45:08 2011] [YSLoader AppleMobileBackup.exe]
Without any doubt there's some problem with USB device during this operation of restore. After 5 hours looking for a solution, I copied the backup folder (C:\Users\Dani\AppData\Roaming\Apple Computer\MobileSync) to an external disk, installed iTunes in other PC, copy the backup and restore without any problem.
Regards

My 3GS crashes during phone calls over about 3 minutes, even after the upgrade to 5.0

My 3GS crashes during phone calls over about 3 minutes, even after the upgrade to 5.o

I've also got this annoying problem, but it seems to vary how long the phone wants to last before crashing - i think the longest conversation i've had with iOS4 is 15 minutes and it was an important phone call (my son was in hospital at the time and i was away on business)
i was hoping that iOS4.2 would fix the problem, but alas nothing but more crashing..
being a user of Apple products since 1984, having this trouble is pretty disappointing as i used to believe that Apple made a quality product..

I was trying to upgrade to OSX 10.9 but during the upgrade when the download got to 2.6gb /5.29gb message "an error occurred" appeared and since then i have been un able to upgrade, what can i do.

I was trying to upgrade to OSX 10.9 but during the upgrade when the download got to 2.6gb /5.29gb message "an error occurred" appeared and since then i have been un able to upgrade, what can i do.

If you purchased Lion for your iMac, just log into the Mac App Store from your MacBook using the Apple ID under which you purchased Lion and go to the Purchases page. You will be able to download and install Lion there.
searching the internet i found a link to upgrtade to 10.7
The only place you get get Lion is from the Mac App Store. If you found some other site, that was an illegal copy and almost certainly tied to someone else's Apple ID and hence unusable by you. If the link was just to the Mac App Store, see above.
As to the problem with synchronization to iCloud, that's not a 10.6 question, so I'd suggest you take up that specific issue in either the Lion or iCloud forums, providing full details, and someone there can probably help you sort things out.
Regards.

"Program files" directory problem during Microsoft Office Customization Installer in non-English versions of Windows

We have a document-level customization solution for Word and are experiencing problems during deployment in an environment running on terminal services. The OS (Windows 2012) is English and Word (2013) is non-English (German).
Installation is done into the "Program Files" folder correctly. But when trying to start a word document linked to the specific template. The "Microsoft Office Customization Installer" pops up with the error.
"There was an error during installation"
From: file:///C:/Programme/[CompanyName]/[Productname]/[Productname].vsto
Downloading file:///c:/Programme/[CompanyName]/[Productname]/[Productname].vsto did not succeed.
Exception: ....
System.Deployment.Application.DeploymentDonwloadException: Download file:///C:/Programme/[Companyname]/Productname]/[Productname].vsto did not suceed. ---> System.Net.WebException: Could not find a part of the path 'C:\Programme\[Companyname]\[Productname]\[Productname].vsto'.
---> System.Net.WebException: ...... ---> System.IO.DirectoyNotFoundException......
The problem seems to be that the installer is looking for C:\PROGRAMME instead of C:\PROGRAM FILES. C:\PROGAMME is the German localized name of PROGRAM FILES (http://en.wikipedia.org/wiki/Program_Files).
The installer installs the solution correctly deployed into c:\program files, but when the later a user tries to start it and the Microsoft Office Customization Installer is called, it tries to access the non-existing "c:\programme" folder. This
doesn't exist, because Windows is English.
Is there any thing related to deploying solutions on a platform which has different languages (mixing/matching of OS language and Office language?)
Thank you for your help

Hello,
1. First, I would confirm with you whether you dealt with the localization for your document-level add-in?
2. Did you use this way to define the Create a class that defines the post-deployment action part of Put the document of a solution
onto the end user's computer (document-level customizations only) and did you get the path with Environment.SpecialFolder enum?
To handle this, I would recommend you consider using Environment.SpecialFolder to set that property.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Problem During Installation of ECC 6 on Windows 2003

Here I am facing problem during Import ABAP Phase.
It is throwing Error like that::
CJS-30022 Program 'Migration Moitor' exists with return code 103.
After completeing 9 stages, it's getting problem in Import packages and installation get stucked.
My Server is like that:
OS: Windows Server 2003
Hardware: HP Itanium IA64
Database: Oracle 10.2g
SAP Release : 2004s ECC 6
I have configured Java with j2sdk 1.4.2_12:
JRE 1.5 is not available for IA64 .
I reconfigured the parameter "shared_pool_size" (to 400MB)in init<sid>.ora at \oracle\<sid>\database.
Also adjusted another parameter which is "shared_pool_reserved_size" i.e. 10% of the shared_pool_size.
What to do now.
Please send me feed backs.
Regards,
Sumanta Chatterjee
 

run 'ls -lrta' in /tmp/sapinst_instdir/.... (whatever the lowest path is there, where all the log files are). You should see something like sap<something>.tsk and sap<something>.log. Look at the most recently updated sap<something>.log file for the specific error. One problem I've seen is that if you configure the advanced oracle config to turn off AUTOEXTEND on the tablespaces, the abap load will bomb because it runs out of space. Also, make sure your SYSTEM tablespace has at least 500M.
Posting the relevant contents of the log with the detailed error description would help us provide a better answer as well.
Rich

How do I get facetime on a MacBook Pro to work? I keep getting a " server encountered problem during registration.." message. I have FaceTime ver. 1.1.1

How do I get facetime on a MacBook Pro to work? I keep getting a " server encountered problem during registration.." message. I have FaceTime ver. 1.1.1
Thanks

Icapper wrote:
I will end up getting something other than Logitech speakers, since I'm just weird like that.
Your not weird, your a audiophile.
https://en.wikipedia.org/wiki/Audiophile
Good sound costs money. And with a 5.1 system your usually doing surround sound decoding for BlueRay movies etc. for home theater purposes.
The PC 5.1 surround sound systems require a audio card in a PC tower and mainly used for playing 3D games so that won't work for any Mac at all. So don't buy a PC 5.1 surround sound system for your Mac.
Harmon Kardon has the GoPlay, it's a portable stereo with awesome sound (not as good as their theater systems) and you can hook up a analog male/male stereo mini cable to it from the Mac.
$200 and it has a iPod dock and also takes like 8 batteries so it's portable.
http://www.amazon.com/dp/B002GHBTNC
There is also the Bose Wave clock/radio, you will need a stereo mini to RCA break out cable for that.
http://www.bose.com/controller?url=/shop_online/wave_systems/index.jsp
The GoPlay has much better sound than the Bose, I think the Bose are overpriced.

Problem during 11.1.0.7 clusteware upgrade when runnng post upgrade script

Similar Messages

Maybe you are looking for