Problem during dataloads from myself datasources
Hi folks,
I'm facing the problem that after a hardware crash and subsequent reboot no dataloads from the myself system are working anymore.I'm getting very strange error messages like I posted hereafter. I have not got a clue what to do. I performed already a restore on the source system and ran "activate_all_transfer_Structure" but in vain. Anybody any idea?
THanks+Regards, Thomas
Error in ABAP application program.
The current ABAP program "SAPLSPIAGENTRFC" had to be terminated because one of
the
statements could not be executed.
This is probably due to an error in the ABAP program.
Function module "SPI_LS_STAT_START" was called
with the parameter "IP_AGENTID".
This parameter is not defined.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class
'CX_SY_DYN_CALL_PARAM_NOT_FOUND', was neither
caught nor passed along using a RAISING clause, in the procedure
"SPI_AGENT_TRFC_RUN_CONFIRMED" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
Function module "SPI_LS_STAT_START" was called
with the parameter "IP_AGENTID".
This parameter is not defined.
000350 * ******************************************************************
000360 * * start messure monitoring performnace
000370 * ******************************************************************
> CALL FUNCTION 'SPI_LS_STAT_START'
000390 EXPORTING
000400 ip_agentid = spitr_cp_agent_run_confirmed.
000410 * ******************************************************************
000420 * * check configuration
000430 * ******************************************************************
000440 CALL FUNCTION 'SPI_GET_AGENT_RT_CONFIG'
000450 EXPORTING
000460 ip_agentid = spitr_cp_agent_run_confirmed
000470 IMPORTING
000480 et_config = lt_config.
Hello Thomas,
Check the connection of My Self System. May be that was disturbed. also check the connections of BI system with the other sourcesystems available. I am sure that you can solve the problem one by one taking your basis consultant job.
All the best.
Regards
R Karthik K
Similar Messages
-
Problem during restore from a file
Hello guys,
I'have a big problem during restore a backup, the situation :
I want to upgrade my iPhone from 4.0.2 to 4.3.3
I make a encrypted backup (I know password ...) of the old version -> ok no errors
I upgrade iOS -> ok
When I want to restore the version I ve just backup -> it crashs : iphone restart and error appears "the Iphone was disconnected" ... (it works fine with an older backup of december 2010 ...)
I try to unistall / reinstall iTunes, it's the last version -> same problem
I try one a another machine (Windows 7 and XP) -> same problem
The logs :
[4896 @ Mon Jun 20 22:33:02 2011] [com.apple.console AppleMobileBackup.exe] Unable to move temporary file "C:\Users\***\AppData\Roaming\Apple Computer\MobileSync\Backup\Logs\MobileBackup-unknown-20110620-223302-Restore-Co mputer.log" (3)
[4896 @ Mon Jun 20 22:33:02 2011] [com.apple.console AppleMobileBackup.exe] Unable to move temporary file "C:\Users\Hamad\AppData\Roaming\Apple Computer\MobileSync\Backup\Logs\MobileBackup-10b66065f7dbf1da28658fd7fbeb7b128a 871760-20110620-223302-Restore-Computer.log" (3)
[4896 @ Mon Jun 20 22:33:02 2011] [com.apple.console AppleMobileBackup.exe] WARNING: Restoring 10b66065f7dbf1da28658fd7fbeb7b128a871760 from 10b66065f7dbf1da28658fd7fbeb7b128a871760-20110619-224423
[5564 @ Mon Jun 20 22:34:09 2011] [(unknown facility) iTunes.exe] AMDServiceConnectionReceiveMessage (thread 3352): Could not receive size of message: 0 No error
[5564 @ Mon Jun 20 22:34:09 2011] [(unknown facility) iTunes.exe] _read_thread (thread 3352): Could not receive message: 0xe8000001
[4896 @ Mon Jun 20 22:34:10 2011] [com.apple.console AppleMobileBackup.exe] ERROR: Connection to device lost (com.apple.MobileBackup.ErrorDomain/200)
[4896 @ Mon Jun 20 22:34:10 2011] [com.apple.console AppleMobileBackup.exe] ERROR: Restore error: -10
I want to restore at least my contacts, sms and photos, the issue was the backup is encrypted that why I cant't acceess directly to the concerned files ...
Can somebody help me?
ThanksHello, I had the same problem with my notebook (HP Envy 15) and iTunes 10.5 after install iOS 5. The restore backup fail and show the next text:
[4428 @ Mon Oct 17 00:44:41 2011] [com.apple.console AppleMobileBackup.exe] Unable to move temporary file "C:\Users\Dani\AppData\Roaming\Apple Computer\MobileSync\Backup\Logs\MobileBackup-unknown-20111017-004441-Restore-Co mputer.log" (2)
[4428 @ Mon Oct 17 00:44:41 2011] [com.apple.console AppleMobileBackup.exe] Unable to move temporary file "C:\Users\Dani\AppData\Roaming\Apple Computer\MobileSync\Backup\Logs\MobileBackup-71f0bc4bbd4f76087135ff002d3b0c7f6b 85ee0f-20111017-004441-Restore-Computer.log" (2)
[4428 @ Mon Oct 17 00:44:41 2011] [com.apple.console AppleMobileBackup.exe] WARNING: Restoring 71f0bc4bbd4f76087135ff002d3b0c7f6b85ee0f from 71f0bc4bbd4f76087135ff002d3b0c7f6b85ee0f
[4428 @ Mon Oct 17 00:44:41 2011] [(unknown facility) AppleMobileBackup.exe] _AMDDeviceAttachedCallbackv3 (thread 3008): Device 'AMDevice 004EFAA8 {UDID = 71f0bc4bbd4f76087135ff002d3b0c7f6b85ee0f, device ID = 1, location ID = 0x0, product ID = 0x1297}' attached.
[4428 @ Mon Oct 17 00:45:08 2011] [(unknown facility) AppleMobileBackup.exe] lockssl_handshake (thread 3008): SSL handshake fatal lower level error -1: SSL_ERROR_SYSCALL errno (No such file or directory)
[4428 @ Mon Oct 17 00:45:08 2011] [(unknown facility) AppleMobileBackup.exe] AMDeviceStartSession (thread 3008): Could not start session: kAMDInvalidPairRecordError
[4428 @ Mon Oct 17 00:45:08 2011] [(unknown facility) AppleMobileBackup.exe] _AMDNotifyHook (thread 3008): Could not load library SHLWAPI.dll from the AppleMobileDeviceSupport directory, C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\\SHLWAPI.dll.
[4428 @ Mon Oct 17 00:45:08 2011] [com.apple.console AppleMobileBackup.exe] ERROR: Error attaching to device
[4428 @ Mon Oct 17 00:45:08 2011] [YSLoader AppleMobileBackup.exe]
Without any doubt there's some problem with USB device during this operation of restore. After 5 hours looking for a solution, I copied the backup folder (C:\Users\Dani\AppData\Roaming\Apple Computer\MobileSync) to an external disk, installed iTunes in other PC, copy the backup and restore without any problem.
Regards -
Hi all
I am migrating my application from weblogic 7.0 to oracle9iAS Release2 Version 9.0.2.
My problem is:
In my application, after an entity bean creates a row in the table, if there is any SQL update or insert in the same transaction for the same table to which the entity bean created the row, Oracle9iAS could not proceed with the transaction(it is locking indefinitely the stored procedure which is either updating or inserting).
After analysing the problem,i found that this is working in Weblogic because of the following parameter in the weblogic-ejb-jar.xml.
<delay-updates-until-end-of-tx>false</delay-updates-until-end-of-tx>
The function of the above parameter in Weblogic is:
Setting delay-updates-until-end-of-tx to false does not cause database updates to be "committed" to the database after each method invoke; they are only sent to the database. Updates are committed or rolled back in the database only at the conclusion of the transaction.
My question is Is there any such parameter or its equivalent in oracle9iAS or is there any way to get out of this problem. This is very urgent for me......plz help me out.
Thanks in advance,
Siva KishorHi,
The tag (delay-updates-until-commit) you have suggested was not compatiable with oracle9iAS 9.0.2, It is giving "Counld not recognize "delay-updates-until-commit" in orion-ejb-jar.xml during deployment of the jar.
So we have migrated our application to oracle9iAS 9.0.3. Now we are not getting any such error during deployment but while using the application to insert/update getting Null PointerException.
This problem may be related with some migrating issues of Oracle App server(9.0.3).
But at the same time this can be related with EJB's coding also since this new version
of Oracle App server is compatible with EJB 2.0, our application has been developed using EJB1.1 Spec.
This is the stack trace, during accessing EntityBean.
java.lang.NullPointerException
at com.evermind.server.ejb.EJBUtils.cloneOneObjectInstance(EJBUtils.java
:416)
at com.evermind.server.ejb.EJBUtils.cloneHashMap(EJBUtils.java:523)
at com.evermind.server.ejb.EJBUtils.cloneObject(EJBUtils.java:375)
at IIMST_PARTY_VERSIONEB_EntityBeanWrapper387.getAll(IIMST_PARTY_VERSION
EB_EntityBeanWrapper387.java:543)
at iims.PARTY.BPPTYPARTYBean.SAVEPARTYINDVDTL(BPPTYPARTYBean.java:589)
at BPPTYPARTY_StatelessSessionBeanWrapper409.SAVEPARTYINDVDTL(BPPTYPARTY
_StatelessSessionBeanWrapper409.java:811)
at iims.PARTY.TCPTYBean.TRANSACTIONCONTROL(TCPTYBean.java:939)
at TCPTY_StatelessSessionBeanWrapper423.TRANSACTIONCONTROL(TCPTY_Statele
ssSessionBeanWrapper423.java:133)
at _party._PCPTY__PROCESS__1.processBody(_PCPTY__PROCESS__1.java:2005)
at _party._PCPTY__PROCESS__1._jspService(_PCPTY__PROCESS__1.java:3897)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:5
6)
at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:5
37)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:272)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterC
hain.java:65)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletReque
stDispatcher.java:560)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(Ser
vletRequestDispatcher.java:306)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequ
estDispatcher.java:209)
at _party._PCPTY__PROCESS.processBody(_PCPTY__PROCESS.java:4473)
at _party._PCPTY__PROCESS._jspService(_PCPTY__PROCESS.java:4557)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:5
6)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterC
hain.java:65)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletReque
stDispatcher.java:560)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(Ser
vletRequestDispatcher.java:306)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpReques
tHandler.java:767)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java
:148)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java
:72)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExec
utor.java:803)
at java.lang.Thread.run(Thread.java:479)
Regards
kishor -
Accounting Problem during STO from Plant to Plant with M.type 351
Dear Experts,
Pl. provide solution for the following problem.
Problem :
Wrong accounting generation at the time of Goods Issue from plant to plant within a single company code with Movement type 351 and without Delivery document.
Business scenario :
In order to capture the profit from a Supplying profit center to receiving profit center , receiving plant (profit center for eg. XX maintained in a Material Master ) has generated a Stock Transfer Order (STO) with profit margin for the supplying plant ( profit center YY maintained in a Material Master ) by maintaining conditions.
Required Accounting Document :
Inventory Account Supplying Profit Center - * CREDIT*
Inventory Account Receiving Profit Center - DEBIT
Income from Stock Transfer for the supplying profit Center u2013 CREDIT
Expense from stock Transfer for the receiving profit Center - DEBIT
Generated Accounting Document in SAP:
Inventory Account Supplying Profit Center - CREDIT
Inventory Account Receiving Profit Center - DEBIT
Income from Stock Transfer for the supplying profit Center u2013 DEBIT
Expense from stock Transfer for the receiving profit Center - CREDIT
regards,
YKhi
check your OBYC settings -
Problem during upgrade from 10g R1 to R2 - background color
We are using Oracle 10g Forms , where we will have date and time display in every page of the form. Now we have upgraded the version from 10g R1 to R2.
In R1 , when the date&time flickers the background color will be in white color.
But in R2, when the date&time flickers the background color is in Grey color.
How to change the background color back to white. the date & time display calls the jar file to display the time. No change in the jar file.. I have changed the background color in the property palette of the date&time as white.. but still the problem exist..
Any suggestions or solutions , plsssss.......In R2:
HTMLbeforeForm=<SCRIPT LANGUAGE="JavaScript">window.opener = self;</SCRIPT>
# HTMLbeforeForm=
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms/lservlet
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
imageBase=DocumentBase
# Forms applet parameter
width=750
# Forms applet parameter
height=600
# Forms applet parameter
separateFrame=false
# Forms applet parameter
splashScreen=
# Forms applet parameter
background=
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar
# Forms applet archive setting for Microsoft Internet Explorer native JVM
archive_ie=frmall.cab
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=frmall.jar
heartBeat=30
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0026-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,26
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.26
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=1
In R1 :
HTMLbeforeForm=
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms90/l90servlet
# Forms applet parameter
codebase=/forms90/java
# Forms applet parameter
imageBase=DocumentBase
# Forms applet parameter
width=750
# Forms applet parameter
height=600
# Forms applet parameter
separateFrame=false
# Forms applet parameter
splashScreen=
# Forms applet parameter
background=
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=f90all_jinit.jar
# Forms applet archive setting for Microsoft Internet Explorer native JVM
archive_ie=f90all.cab
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=f90all.jar
# heartBeat 8/16/2006 czlapinski
# heartBeat changed to 30 8/29/2006 czlapinski
heartBeat=30
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms90/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0026-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,26
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.26
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/plugin/1.3/plugin-install.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:8AD9C840-044E-11D1-B3E9-00805F499D93
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/1.3/jinstall-13-win32.cab#Version=1,3,0,0
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;version=1.3
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=1
Using the same Jinitator version , but the version for jpi differs. -
TP version problem during upgrade from 4.7 sr2 to ECC6
Hello All,
i am doing an upgrade from 4.7 to ECC6 (ultimately i have to upgrade to EHP4). I am stuck in phase PREPARE module Initialization finished with status failed #. Below is the error i am getting. before pasting log file i tried my best to uprade TP level by upgrading the Patch level. but its not taking effact in to SAP system. If i check TP version in STMS >> system >> Check TP tool it shows me old version.
below is the error log excerpt from file CHECKS.LOG
#====================================================#
Requests and information for module Initialization #
#====================================================#
ERROR: The upgrade needs a patched version of R3trans which is
build on 21.06.06 or later.
The R3trans in your active SAP kernel is either older or
the version could not be determined. Call it without
any option to determine the build date.
If the build date is too old, you have to replace it
before you can continue the upgrade.
Download the latest executable available from the SAP service
market place and update it before you continue.
Otherwise, the upgrade tools will be corrupted.
INFO: The version check of the disp+work in your active SAP kernel
determined that it has a sufficient level.
No update of disp+work is necessary.
ERROR: The upgrade needs a patched version of tp with version
number 340.16.05 or higher.
The tp in your active SAP kernel is either older or the
version could not be determined. Call it without any option
to determine the version.
If the version is too old, you have to replace it before
you can continue the upgrade.
Download the latest executable available from the SAP service
market place and update it before you continue.
Otherwise, the upgrade tools will be corrupted.
ERROR: To be able to use ASU Toolbox, your system requires
the ST-PI software component with at least Support Package Level 8
After the update is done, the module must be repeated!
For more information, see the upgrade documentation
INFO: The upgrade strategy for the addon ABA_PLUS
is described in note: 632429
INFO: The upgrade strategy for the addon APPINT
is described in note: 632429
INFO: The upgrade strategy for the addon BP-R3PF
is described in note: 632429
INFO: The upgrade strategy for the addon FINBASIS
is described in note: 438521
INFO: The upgrade strategy for the addon LSO
is described in note: 503468
INFO: The upgrade strategy for the addon LSOFE
is described in note: 503907
INFO: The upgrade strategy for the addon PI
is described in note: 700779
INFO: The upgrade strategy for the addon PI_BASIS
is described in note: 555060
INFO: The upgrade strategy for the addon SLL_PI
is described in note: 1306751
INFO: The upgrade strategy for the addon ST-A/PI
is described in note: 69455
INFO: The upgrade strategy for the addon ST-PI
is described in note: 539977
INFO: The upgrade strategy for the addon WP-PI
is described in note: 632429
#===========================================================#
PREPARE module Initialization finished with status failed #
#===========================================================#
i downloaded the 47 kernel files SAPEXEDB_304-20001172.SAR and SAPEXE_304-20001172.SAR and installed the kernel file. if i check TP version from command level it shows me 340.16.62, but in SAP STMS it shows me 340.16.03. Can somebody explain what shoulkd i do?
Can i know also if i can update SAP Kernel from 4.7 sr2 to NW7.0 without upgrading even started?
If somebody can tell me the exact number of CDs to use to upgrade from 4.7 SR2 to ECC6 EHp4, that would be very
nice.
ManiHi Mani,
ERROR: The upgrade needs a patched version of R3trans which is
build on 21.06.06 or later.
ERROR: The upgrade needs a patched version of tp with version
number 340.16.05 or higher.
show that the tp and R3trans used by the source 470 system are old.
You should download the latest tp and R3trans for kernel 470, and
replace the old tp and R3trans with the downloaded ones under the 470 kernel directory. The 470 kernel directory is specified by parameter DIR_EXECUTABLE which is usually /usr/sap/<SID>/SYS/exe/run.
Please note that there is also a kernel directory under /<DIR_PUT>/<SID>/SYS/exe which is for the the target system 700. Please do not replace tp and R3trans under this directory with the ones downloaded for kernel 470.
NO, you cannot update SAP Kernel from 4.7 sr2 to NW7.0 without upgrading even started. Kernel upgrade will be done by SAPup automatically.
With Best Regards
Julia -
Hi ,
Let me give you some background..
we were sailing well with our 9.2.0.6 version in Sun 64 SPARC for our Data Warehouse till we hit what is called one million bug!! Segement and extent does not match!! In order to get rid of it we decided to upgrade our Production database from 9.2.0.6 to 9.2.0.8.We tested first in Stage and it was running fine all our ETL job was running without any issues.Then we tried changing some parameter as given below
Parallel_automatic_tuning set to false
parallel_max_server set to 64 from 160.
After making this change we hit a bug in stage which we resolved by applying the patch 5523799.This bug says that oracle gets hit with
ORA-600 [KCBGTCR_3] AND ORA-600 [KCBGTCR_12] WHEN DOING OWB MAPPING
But in production even with this patch applied we are unable to make select count(*). One mistake what what we did,which makes the stage and production processes different is that while making parameter changes in production we changed
parallel_max_server set to 64 from 160 keeping
Parallel_automatic_tuning set to true!!
Then we truncated a Master table with 8 million rows through a job before we realized the mistake.But now nothing is working!! Do you have any idea how to fix the issue.
If you need anymore information please let me know.
I appreciate your helping hands.
ADFirst off, note that a number of folks around here intentionally avoid posts marked "urgent"-- that's generally considered impolite. Others avoid threads that are cross-posted in multiple forums. Either of those could slow down responses...
What does "unable to make select count(*)" mean? Are you getting an error in prod? Is it the same error you're getting in staging?
Normally, urgent production issues, particularly those that seem to be related to a particular Oracle bug, need to be dealt with by Oracle support. Unless someone here happens to have dealt with this very particular scenario, the best we could do would be to try to read the same Metalink notes you're probably already reading to try to come up with suggestions. In the end, though, it's likely that Oracle Support will need to be involved to figure out what the safe options are.
Also, please understand that we're all volunteers here, so certain types of issues are just outside the scope of what anyone here is likely to be able to help with. I'm more than happy to spend hours reading Metalink notes, building test systems, and testing approaches to resolve issues for a client when I understand the systems in place (and where my hours are billable). I, and most of the other folks around here, can't generally commit that sort of time for free to resolve very specific errors on production systems we don't understand. Even if we had the time, OTN isn't an ideal forum for the sort of back-and-forth that would be necessary before anyone could responsibly suggest changes to make to a production system.
Of course, someone may come along that has hit exactly the bug you've hit and happens to know of a quick and easy solution. If there is no Metalink note that is directly on point, though, I'd tend to doubt that the perfect person will come along, certainly not in the very near term.
Justin -
Idoc problem during upgrade from 4.0 to 4.6c
Hi All,
Currently we are upgrading our system from 4.0 to 4.6c.
We uses Basic idoc type DELVRY01:it has so many segments which have new definition now in 4.6c, for example segment E1EDL20:- new definition of this segemnt has 3 new extra fields in 4.6c.
Now due to it, whenever we are creating an idoc in 4.6c it comes with extra fields in them.
But after upgrade we want our idoc fields to be same as it was in 4.0.
How we can do it i.e creating an idoc in 4.6c but using the same segment definition used in 4.0.
Thanking in advance.
Nazir.Hi Martin,
Thanks for the reply.
I even put the Seg Rel as 40A in partner profile, but after idoc creation it comes with extra fields only.
Is there anyother setting that needs to be change ?
Nazir. -
Sound problem during render from iMovie to iDVD
I created an iMovie project that plays beautifully on my iMac G5 with OS X v 10.4.5.
When it comes time to create a DVD project, iMovie tells me that because of two slow motion scenes, that "rendering" has to be performed.
Within iDVD, the video plays fine. But the sound is warbled and slow (though in the correct key) throughout.
I closed iDVD, iMovie, rebooted, and tried to create another iDVD, but the same thing occurred.
Is there a way I can salvage this project?Hi, Paul,
iMovie 'renders' slo-mo in a way that you don't really want--as you discovered. So, get your movie into iDVD without letting iMovie render it. Try doing it this way:
Instead of sending your iMovie to iDVD from within iMovie, close iMovie.
Open iDVD, and create a new project. Click on the 'custom' button, and navigate to the 'Media' tab. Select 'Movies' and find your iMovie in the little window. Drag it onto the iDVD screen. Be sure not to put it into a drop zone. Then, make the titles and buttons the way you wish.
Save the DVD as disk image. You can play that after it is finished to see if the sound is what you want. If so, go ahead and burn your DVD.
Hope this helps!! -
Problems when transporting from DEV to PROD
Hi experts, I have problem during transport from DEV to Production.
We have a DEV, QAS and PRODUCTION and we have transport from DEV to QAS very well. But when we transport from DEV to PROD, recibe an error like:
After beginning the import method RS_IOBC_AFTER_IMPORT for Objects types IOBC mode (activation)
Failed to verify catalog InfoObjetos ZCM_UNIMET_CHA01
The InfoObjeto ZCM_RENC version does not exist in active
The InfoObjeto ZCM_RENM version does not exist in active
1.The Query is: Wy if the transport go OK from DE to QAS, then The transport from DEV to PROD terminated in error?.
2. There are any items to check in production before to transport?.
PD: All of the Objects in DEV are in ACTIVE status
Tanks,
Ramon SulvaranThe transport ended in QAS with error code (4) and ended in Producion with error code (8), the detal of the error in Production begin with:
Home After import RS_ODSO_AFTER_IMPORT method for type (s) ODSO object (trigger mode)
Activation of DataStore objects of type Object
Check DataStore objects of type Object
DataStore Object Verification ZCM_DS01
The DataStore object is consistent ZCM_DS01
Burning the DataStore objects of type Object
Internal activation (DataStore Object)
Pretreatment / Creating DDIC objects to DataStore Object ZCM_DS01
Table / View / BIC/AZCM_DS0100 (type 0) DataStore object recorded ZCM_DS01
Create / Delete the indexes for the active table
Table / View / BIC/AZCM_DS0140 (type 4) recorded ZCM_DS01 DataStore object
Type of table / BIC/WAZCM_DS0100 recorded
Table / View / BIC/VZCM_DS012 (type VIEW) recorded ZCM_DS01 DataStore object
Log ZCM_DS01 DataStore object changes was recorded successfully
Writing Object Catalog entries (Tadiran)
He has written the object TABL / BIC/AZCM_DS0100 in catálgo objects (Tadiran)
He has written the object TABL / BIC/AZCM_DS0140 in catálgo objects (Tadiran)
He has written the object TABL / BIC/VZCM_DS012 in catálgo objects (Tadiran)
He has written the object TTYP / BIC/WAZCM_DS0100 in catálgo objects (Tadiran)
Activate all ABAP Dictionary objects (5):
Error / Warning in progr.activación Dict., Detailed log> Detail
Activate table / BIC/AZCM_DS0100.
Lack of expansion to the category table
Lack of extension category for include or subtype .......
When i go to BW Production to check teh object. I see tha the Object was create but in inactive status (grey color). When y Try to Actiavate it y see the error: Error/ Warning in program Activation Dcit. Detailed Log -> Detail -
Problem during hierarchy load from ECC 6.0 to BW
Hello,
I encountered a problem during hierarchy loads from ECC to BW:
I get the following in BW:
Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during IDoc update:
Once I go into ERP and look at the IDocs I get the following message:
Idoc Error 26:
EDI: Syntax error in IDoc (segment cannot be identified)
Message no. E0078
Diagnosis
The segment E1RSSH does not occur at the current level of the basic type (extension ).
This error can have several reasons:
The segment E1RSSH is assigned to a group whose header segment does not occur.
The segment E1RSSH does not exist in the syntax description of the basic type (extension ).
The sequence of segments in the group in which the segment appears is incorrect.
Previous errors ('mandatory' segment or group missing) may be due to this error.
Procedure
Please check the IDoc or the syntax description of the basic type (extension ).
Can anyone help?The most basic setting in a BW system is its connectivity with the R/3 system (which is a basis team activity, but BI consultant can always help).
Issue: While creating source system, I am getting an error "Segment E1RSSH does not exist".
Diagnosis
Segment E1RSSH is in the syntax description, but it does not exist.
The issue was that some of the entries in the table EDISEGMENT were missing.
As this a standard table, it is recommended to restore the table from Backup or from another BI system. (Please ask your basis team to do it.)
Now, the significance of the segments: We all know that we require 3 message types in total to communicate with R/3 system. RSRQST, RSSEND and RSINFO.
Now each of the message types has some segments which help in communication.
You can see this segment types in the t-code we30. Just enter the basic idoc type and click on display.
This error is not a common error, but can be useful if at any stage of implementation or support, the table gets disturbed and you have issues with source system connectivity.
Thanks
SM -
the mac clients are running RDC for mac version 2.1 and they cannot connect to Windows 2008 R2 TS server. They get the error "You were disconnected from the Windows-based computer because of problems during the licensing protocol".
really appreciated if someone have a fix for this.
thanks,
/danHey,
Any proposed answer for this ?
I face the same problem and my environment
and I've got same results as dle2k
1. TS lic mode is set to per user confirmed it works for windows clients.
2. the TS server's system log logged error "The Terminal Server security layer detected an error in the protocol stream and has disconnected the client".
3. the reports shows per user cal has been issued to users. no temp per device cal has been issued.
4. yes, CoRD works .
5. we tried version 2.1.1 of the Mac RD Client but it also does not work. -
I get redirected to unwanted web sites during searches from the browser ONLY, never from the toolbar. Is this the same malware problem as discribed for redirects from BOTH the browser and the toolbar?
== This happened ==
Every time Firefox opened
== was happening with Internet Explorer, continues with FirefoxDid you do a malware check?
Do a malware check with a few malware scan programs.
You need to use all programs because each detects different malware.
Make sure that you update each program to get the latest version of the database.
http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
http://www.superantispyware.com/ - SuperAntispyware
http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]
(the MozillaZine KB is currently down, so you may need to try again later) -
We have a document-level customization solution for Word and are experiencing problems during deployment in an environment running on terminal services. The OS (Windows 2012) is English and Word (2013) is non-English (German).
Installation is done into the "Program Files" folder correctly. But when trying to start a word document linked to the specific template. The "Microsoft Office Customization Installer" pops up with the error.
"There was an error during installation"
From: file:///C:/Programme/[CompanyName]/[Productname]/[Productname].vsto
Downloading file:///c:/Programme/[CompanyName]/[Productname]/[Productname].vsto did not succeed.
Exception: ....
System.Deployment.Application.DeploymentDonwloadException: Download file:///C:/Programme/[Companyname]/Productname]/[Productname].vsto did not suceed. ---> System.Net.WebException: Could not find a part of the path 'C:\Programme\[Companyname]\[Productname]\[Productname].vsto'.
---> System.Net.WebException: ...... ---> System.IO.DirectoyNotFoundException......
The problem seems to be that the installer is looking for C:\PROGRAMME instead of C:\PROGRAM FILES. C:\PROGAMME is the German localized name of PROGRAM FILES (http://en.wikipedia.org/wiki/Program_Files).
The installer installs the solution correctly deployed into c:\program files, but when the later a user tries to start it and the Microsoft Office Customization Installer is called, it tries to access the non-existing "c:\programme" folder. This
doesn't exist, because Windows is English.
Is there any thing related to deploying solutions on a platform which has different languages (mixing/matching of OS language and Office language?)
Thank you for your helpHello,
1. First, I would confirm with you whether you dealt with the localization for your document-level add-in?
2. Did you use this way to define the Create a class that defines the post-deployment action part of Put the document of a solution
onto the end user's computer (document-level customizations only) and did you get the path with Environment.SpecialFolder enum?
To handle this, I would recommend you consider using Environment.SpecialFolder to set that property.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How do I get facetime on a MacBook Pro to work? I keep getting a " server encountered problem during registration.." message. I have FaceTime ver. 1.1.1
ThanksIcapper wrote:
I will end up getting something other than Logitech speakers, since I'm just weird like that.
Your not weird, your a audiophile.
https://en.wikipedia.org/wiki/Audiophile
Good sound costs money. And with a 5.1 system your usually doing surround sound decoding for BlueRay movies etc. for home theater purposes.
The PC 5.1 surround sound systems require a audio card in a PC tower and mainly used for playing 3D games so that won't work for any Mac at all. So don't buy a PC 5.1 surround sound system for your Mac.
Harmon Kardon has the GoPlay, it's a portable stereo with awesome sound (not as good as their theater systems) and you can hook up a analog male/male stereo mini cable to it from the Mac.
$200 and it has a iPod dock and also takes like 8 batteries so it's portable.
http://www.amazon.com/dp/B002GHBTNC
There is also the Bose Wave clock/radio, you will need a stereo mini to RCA break out cable for that.
http://www.bose.com/controller?url=/shop_online/wave_systems/index.jsp
The GoPlay has much better sound than the Bose, I think the Bose are overpriced.
Maybe you are looking for
-
How to create one checksum for 264 vis
Hi, How to create "one Checksum" for 264 Vis.These 264 Vis are Interlinked if i change code for any .vi the checksum Should be update.This checksum is shown on the main window. Regards Ravindranath Solved! Go to Solution.
-
Create dynamic table in web dynpro abap
Hi Friends, I want to create several tables in a web dynpro. For this reason I have created a View, a group1 and a context node. Now I want create a table for each characteristic group from cabn in the ui group1. For this reason I want to use create_
-
iPhoto is appearing as free on MAC store and it is also featured as one of the top 10 free apps, when i downloaded it, my credit card got charged for 790 rupees. I am using the latest OSX Maverick.
-
I am trying to test my Deadline and Exception handling.But it is not at all working. I will explain what I have done, please guide me where I am going wrong. 1) Block Step. Properties --- Exception == ERROR1 2)Switch Step . Success Branch . Send Step
-
GarageBand 10.0.3 will not load any of my 64-bit plugins
Hello all, I recently upgraded to Mac OS X Yosemite and updated GarageBand to 10.0.3. However, when I try to load any of my 64-bit plugins, I get the following error messages: The Audio Unit "Dimension P" could not be loaded for your project, and ma