Problem during implementation of SP5 in PI 7.1 EHP 1

Hi,
we try to implement SP5 in our new installt PI System (7.1 EHP1) with the JSPM. The validation phase aborts and in the JSPM_MAIN_1_01.LOG there is the following enty:
Aug 16, 2010 9:59:28 AM [Error]: Validation finished with error. See log /usr/sap/PIE/DVEBMGS32/j2ee/JSPM/log/log_2010_08_16_09_43_22/deploy_2010-08-16_09-58-49.log for details.
Aug 16, 2010 9:59:28 AM [Warning]: Undeployment of component sap.com/com.sap.aii.ibrep.deployservice is rejected because undeployment of other component it depends on is rejected; detailed message is $(2)
Aug 16, 2010 9:59:28 AM [Error]: Detailed message: The item is skipped as there are items which depend on it. The items which depend on are: (name: 'com.sap.xi.repository', vendor: 'sap.com')
In the second lof-file mentioned, there are no further description concerning the error (there only "infos").
Any ideas?
Regards
Ulrike

Hi Ulrike,
in PI 7.11 there is a dependency between SAPXIESR and SAPXIGUI ,
ie., see
[1335523 FAQ: Deployment PI Patches in Release 7.1 and higher|http://service.sap.com/sap/support/notes/1335523 ]
Regards
Kenny

Similar Messages

Problems during implementation........

Can anyone please send me some problems faced during implementation at the five stages interacting with the client?Please send me to my mail [email protected]

The major problem during implementation is gaps in AS-IS Study. If we do not study the peocess to the minute bit, then we tend to miss out critical requirement & this is realized during testing. Then the redo takes a longer time, compared to doing it correct initially. Ofcourse, Things will not be correct in first attempt, but if the number of things to redo is leasser, it becomes more convienent, as during testing phase, we are already overloaded with many activities to be taken care of.
We should be very clear what is not possible in SAP or even if possible with development, but the particular development is not in scope of project, we require to say a clear NO to it.
It is difficult to pin point the problems. If I share one of my experience, one of my project was fot service industry & the basic scenarios were periodic billing, mile stone billing & resource related billing & all three I had no prior experience. I had clue of Milestone & Periodic, but no clue of resouce related billing. I had to stuggle hard to get the scenario configured & configuring to the requirement of client. But finally I could do it successfully.
Regards,
Rajesh Banka
Reward suitable points.

Problem during implementation of log4j in portal

Hi,
I am quite new to portal. I am trying to customize the com.sap.portal.runtime.logon.par file. Everything is perfect. But while I am trying to incorporate my own logging using log4j, the log file is not getting generated. Can you please suggest me how can I incorporate log4j in this par file and generate my own log file in my desired location?

Hi,
Visit this link (using Log4j )
Use Log4j in J2EE Project
Look at how to config and use log4j and a sample application
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36085e78-0801-0010-678d-8b4e89ddff3c
check for the same problem of your
Log4j setup in WEB AS
Hope that helps

Problem during implementing SAP note manually

HI
I am implementing a note manually, which have instruction like below
Manual Pre-Implement.
VALID FOR
Software Component   SCMSNC                         Supply Network...
Release 700          Until SAPK-70006INSCMSNC
Release 701          Until SAPK-70101INSCMSNC
o Open BAdI /SCF/CSV_SETTINGS in SE18
- Add the following 2 methods to interface /SCF/IF_EX_CSV_SETTINGS:
CHANGE_INPUT_ENCODING
CHANGE_OUTPUT_ENCODING
But when I go till point I can able to add the method as it is grayed out
Is there any reason or different way of implementing the note manually?
Regards
Dev

To implement note manually you need to get the access key. Once you give the access key you can apply the note corrections.

What problems faced during implementation BW projects few eg: Please

Hi BWers,
Please, can you give me some examples regarding
" what problems you faced during implementation of BW projects.
Thanks
points will be given with big heart.
Again Thanks
Regards
Mubeen.

Hi,
Implementation issues
Lifecycle Implementation
http://help.sap.com/bp_biv170/documentation/SolutionScope_EN.doc
http://help.sap.com/bp_biv235/BI_EN/documentation/BWProjectPlan_EN.mpp
Details on the Implementation Phase
http://help.sap.com/saphelp_nw04/helpdata/en/2c/36177e645911d395fe00a0c94260a5/frameset.htm
Hope this helps.
Thanks,
JituK

Problem during hierarchy load from ECC 6.0 to BW

Hello,
I encountered a problem during hierarchy loads from ECC to BW:
I get the following in BW:
Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during IDoc update:
Once I go into ERP and look at the IDocs I get the following message:
Idoc Error 26:
EDI: Syntax error in IDoc (segment cannot be identified)
Message no. E0078
Diagnosis
The segment E1RSSH does not occur at the current level of the basic type (extension ).
This error can have several reasons:
The segment E1RSSH is assigned to a group whose header segment does not occur.
The segment E1RSSH does not exist in the syntax description of the basic type (extension ).
The sequence of segments in the group in which the segment appears is incorrect.
Previous errors ('mandatory' segment or group missing) may be due to this error.
Procedure
Please check the IDoc or the syntax description of the basic type (extension ).
Can anyone help?

The most basic setting in a BW system is its connectivity with the R/3 system (which is a basis team activity, but BI consultant can always help).
Issue: While creating source system, I am getting an error "Segment E1RSSH does not exist".
Diagnosis
Segment E1RSSH is in the syntax description, but it does not exist.
The issue was that some of the entries in the table EDISEGMENT were missing.
As this a standard table, it is recommended to restore the table from Backup or from another BI system. (Please ask your basis team to do it.)
Now, the significance of the segments: We all know that we require 3 message types in total to communicate with R/3 system. RSRQST, RSSEND and RSINFO.
Now each of the message types has some segments which help in communication.
You can see this segment types in the t-code we30. Just enter the basic idoc type and click on display.
This error is not a common error, but can be useful if at any stage of implementation or support, the table gets disturbed and you have issues with source system connectivity.
Thanks
SM

CO-PA problem during Go-Live

Hi experts,
I have a problem during go-live related to posting to co-pa
I have scheduling agreement. I don't want to post it in co-pa.
I excluded my code for this order type (E), but when the user goes to create the scheduled lines, SAP posts to co-pa the document.
I already implemented UE ZXKKEU11 and ZXKKEU03... I don't know if others must be implemented...
Help me if possible urgently.
Thanks.

Thanks Sridhar for your reply.
Only first note you mentioned could be help me. The others aren't related to my release. (ECC 6.03).
According to you, why clearing co-pa structure (when data must not be posted) SAP posts however the scheduling agreement record?

"Program files" directory problem during Microsoft Office Customization Installer in non-English versions of Windows

We have a document-level customization solution for Word and are experiencing problems during deployment in an environment running on terminal services. The OS (Windows 2012) is English and Word (2013) is non-English (German).
Installation is done into the "Program Files" folder correctly. But when trying to start a word document linked to the specific template. The "Microsoft Office Customization Installer" pops up with the error.
"There was an error during installation"
From: file:///C:/Programme/[CompanyName]/[Productname]/[Productname].vsto
Downloading file:///c:/Programme/[CompanyName]/[Productname]/[Productname].vsto did not succeed.
Exception: ....
System.Deployment.Application.DeploymentDonwloadException: Download file:///C:/Programme/[Companyname]/Productname]/[Productname].vsto did not suceed. ---> System.Net.WebException: Could not find a part of the path 'C:\Programme\[Companyname]\[Productname]\[Productname].vsto'.
---> System.Net.WebException: ...... ---> System.IO.DirectoyNotFoundException......
The problem seems to be that the installer is looking for C:\PROGRAMME instead of C:\PROGRAM FILES. C:\PROGAMME is the German localized name of PROGRAM FILES (http://en.wikipedia.org/wiki/Program_Files).
The installer installs the solution correctly deployed into c:\program files, but when the later a user tries to start it and the Microsoft Office Customization Installer is called, it tries to access the non-existing "c:\programme" folder. This
doesn't exist, because Windows is English.
Is there any thing related to deploying solutions on a platform which has different languages (mixing/matching of OS language and Office language?)
Thank you for your help

Hello,
1. First, I would confirm with you whether you dealt with the localization for your document-level add-in?
2. Did you use this way to define the Create a class that defines the post-deployment action part of Put the document of a solution
onto the end user's computer (document-level customizations only) and did you get the path with Environment.SpecialFolder enum?
To handle this, I would recommend you consider using Environment.SpecialFolder to set that property.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Problem During Installation of ECC 6 on Windows 2003

Here I am facing problem during Import ABAP Phase.
It is throwing Error like that::
CJS-30022 Program 'Migration Moitor' exists with return code 103.
After completeing 9 stages, it's getting problem in Import packages and installation get stucked.
My Server is like that:
OS: Windows Server 2003
Hardware: HP Itanium IA64
Database: Oracle 10.2g
SAP Release : 2004s ECC 6
I have configured Java with j2sdk 1.4.2_12:
JRE 1.5 is not available for IA64 .
I reconfigured the parameter "shared_pool_size" (to 400MB)in init<sid>.ora at \oracle\<sid>\database.
Also adjusted another parameter which is "shared_pool_reserved_size" i.e. 10% of the shared_pool_size.
What to do now.
Please send me feed backs.
Regards,
Sumanta Chatterjee
 

run 'ls -lrta' in /tmp/sapinst_instdir/.... (whatever the lowest path is there, where all the log files are). You should see something like sap<something>.tsk and sap<something>.log. Look at the most recently updated sap<something>.log file for the specific error. One problem I've seen is that if you configure the advanced oracle config to turn off AUTOEXTEND on the tablespaces, the abap load will bomb because it runs out of space. Also, make sure your SYSTEM tablespace has at least 500M.
Posting the relevant contents of the log with the detailed error description would help us provide a better answer as well.
Rich

How do I get facetime on a MacBook Pro to work? I keep getting a " server encountered problem during registration.." message. I have FaceTime ver. 1.1.1

How do I get facetime on a MacBook Pro to work? I keep getting a " server encountered problem during registration.." message. I have FaceTime ver. 1.1.1
Thanks

Icapper wrote:
I will end up getting something other than Logitech speakers, since I'm just weird like that.
Your not weird, your a audiophile.
https://en.wikipedia.org/wiki/Audiophile
Good sound costs money. And with a 5.1 system your usually doing surround sound decoding for BlueRay movies etc. for home theater purposes.
The PC 5.1 surround sound systems require a audio card in a PC tower and mainly used for playing 3D games so that won't work for any Mac at all. So don't buy a PC 5.1 surround sound system for your Mac.
Harmon Kardon has the GoPlay, it's a portable stereo with awesome sound (not as good as their theater systems) and you can hook up a analog male/male stereo mini cable to it from the Mac.
$200 and it has a iPod dock and also takes like 8 batteries so it's portable.
http://www.amazon.com/dp/B002GHBTNC
There is also the Bose Wave clock/radio, you will need a stereo mini to RCA break out cable for that.
http://www.bose.com/controller?url=/shop_online/wave_systems/index.jsp
The GoPlay has much better sound than the Bose, I think the Bose are overpriced.

A problem while implementing a file to file senario

hi all :
     There is some problem while implement a file to file senario. the file couldn't be sent or recieved.
      and as I try to check Check the Sender File Adapter Status via
     Runtime Workbench -> Component Monitoring -> Communication Channel Monitoring ,
     It is found that Adapter Engine has error status with red light. Is it why the file couldn't be sent?
    Could you please tell me how to make Adapter Engine available?
    Thank you very much!!!

Hi Sony
Error getting JPR configuration from SLD. Exception: No entity of class SAP_BusinessSystem for EC1.SystemHome.cnbjw3501 found
No access to get JPR configuration
Along with what experts suggested
What is the type of Business system is this. Standalone Java?
JPR can have problem if you have a business system thats not ABAP/Java type if this system is not having a SAP TS in landscape then create Java type.
Thanks
Gaurav

Problem during creation of shipment document and shipment cost document

Hi
My client facing problem during creation of shipment document and shipment cost document at the time of Batch Job
Delivery no 897654: goods issue on 30.11 at 13:22. Shipment on 30.11 (VT01N).
Shipment costs on 1.12 (VI01).
the problem is the shipment document get created on 30.11.2010 but the shipment cost document get created on 1.12.2010
pleas advice.

Hi,
Please check the batch job processing log.
As per my understanding, business requires to generate the Shipment & Shipment cost documents immediatley.
However there is some time between the documents creation time. I dont see any issue in the data or problem in the delivery docs Because system will not generate the shipment docs after 1 or 2 days if there is an issue with the data . There must be problem in the Batch Job.
Analyse the batch jobs and timing of the job process.
Let us know your feedback...
Best Regards,
MKumar

Problem during installation of Solution Manager

Hi All,
I am facing problem during the installation of solution manager. it shows following error during installation
ERROR 2010-05-21 14:39:24
FJS-00003 TypeError: this._name has no properties (in script NW_Doublestack_SCS|ind|ind|ind|ind, line 5140: ???)
ERROR 2010-05-21 14:39:25
FCO-00011 The step collect with step key |NW_Doublestack_SCS|ind|ind|ind|ind|0|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
Please also let me konw how much space do we require for installating the Solution manager as a central system on one drive?

Hi Chandan,
Well may be below SDN thread will help you... out ! try out with Curd Abstoss Response !!
Inst. SAP NW 2004s Java SP9 - Error FJS-00003 this._name has no properties
Hope it will work for you..as well !

Problem during installation of NW7.0 SR3 on Windows x64

Hello all,
I have a problem during the installation of a new central instance.
During the phase 38 "Install Software units", SAPINST shows that logs :
Jul 30, 2008 1:41:10 PM Info: Ending deployment prerequisites. All items are correct.
Jul 30, 2008 1:41:11 PM Info: Saved current Engine state.
Jul 30, 2008 1:41:11 PM Info: Starting: Initial deployment: Selected development component 'caf/eu/gp/model/eap'/'sap.com'/'MAIN_APL70VAL_C'/'1497904'/'5' will be deployed.
Jul 30, 2008 1:41:11 PM Info: SDA to be deployed: D:\usr\sap\PAD\DVEBMGS00\SDM\root\origin\sap.com\caf\eu\gp\model\eap\MAIN_APL70VAL_C\5\1497904\cafeugpmodeleap.sda
Jul 30, 2008 1:41:11 PM Info: Software type of SDA: J2EE
Jul 30, 2008 1:41:11 PM Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) *****
Jul 30, 2008 1:41:13 PM Info: Begin of log messages of the target system:
08/07/30 13:41:11 - ***********************************************************
08/07/30 13:41:12 - Start updating EAR file...
08/07/30 13:41:12 - start-up mode is lazy
08/07/30 13:41:12 - EAR file updated successfully for 250ms.
08/07/30 13:41:12 - Start deploying ...
08/07/30 13:41:12 - EAR file uploaded to server for 93ms.
08/07/30 13:41:13 - ERROR: NOT deployed. The Deploy Service returned the following error:
                     For detailed information see the log file of the Deploy Service.
                     Exception is:
                     com.sap.engine.services.rmi_p4.P4RuntimeException: Unexpected exception.
                          Nested exception is:
                          java.net.SocketException: Connection reset
                     java.net.SocketException: Connection reset
                          at java.net.SocketInputStream.read(SocketInputStream.java:168)
                          at com.sap.engine.services.rmi_p4.Connection.run(Connection.java:395)
                          at java.lang.Thread.run(Thread.java:534)
08/07/30 13:41:13 - ***********************************************************
Jul 30, 2008 1:41:13 PM Info: End of log messages of the target system.
Jul 30, 2008 1:41:13 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Jul 30, 2008 1:41:13 PM Error: Aborted: development component 'caf/eu/gp/model/eap'/'sap.com'/'MAIN_APL70VAL_C'/'1497904'/'5', grouped by software component 'SAP-EU'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.14.0.20071210153525''/'5':
Caught exception during application deployment from SAP J2EE Engine's deploy API:
com.sap.engine.deploy.manager.DeployManagerException: ERROR: NOT deployed. The Deploy Service returned the following error: com.sap.engine.services.rmi_p4.P4RuntimeException: Unexpected exception.
     Nested exception is:
     java.net.SocketException: Connection reset
Exception is:
com.sap.engine.services.rmi_p4.P4RuntimeException: Unexpected exception.
     Nested exception is:
     java.net.SocketException: Connection reset
java.net.SocketException: Connection reset
     at java.net.SocketInputStream.read(SocketInputStream.java:168)
     at com.sap.engine.services.rmi_p4.Connection.run(Connection.java:395)
     at java.lang.Thread.run(Thread.java:534)
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).DMEXC)
Jul 30, 2008 1:41:13 PM Info: Starting to save the repository
Jul 30, 2008 1:41:13 PM Info: Finished saving the repository
What can I do to validate that step ?
Thanks in advance,
Edited by: Alexandre Belgrand on Jul 30, 2008 1:48 PM

Hi,
I had same problem.i resolved it by reinstalling OS and configuring high Page file.
Please set the max and min Page file size of same value.
and also do the java memory tuning as per SAP Notes.
Regards,
Sandeep Nayak

Problem during deployment of axis (stock) examples

Hi all
I am getting problem during the deployment of stock example given in the apache site.
Even i am not getting the right response from the URL
http://localhost:8080/axis/services/Version?method=getVersion
and
http://localhost:8080/axis/EchoHeaders.jws?method=list.
I am using tomcat 4.1 and JDK1.4.
I have set all the jar files in the axisclasspath.
At the deployment i am using the commond
C:\tomcat4\webapps\axis\WEB-INF\classes>java -cp %AXISCLASSPATH% org.apache.axis.client.AdminClient -lhttp://localhost:8080/axis/services/AdminService samples\stock\deploy.wsdd
and getting fault as
Processing file samples\stock\deploy.wsdd
Exception: AxisFault
faultCode: {http://xml.apache.org/axis/}Server.NoService
faultSubcode:
faultString: The AXIS engine could not find a target service to invoke! targetService is null
faultActor:
faultNode:
faultDetail:
{http://xml.apache.org/axis/}hostname:Divyakant-verma
If anybody has solution please let me know
Thanks in advance
Divyakant Verma

I too am having the same issue and I am using the Java2WSDL and the WSDL2Java to create both the WSDL and the WSDD and I still get Server.NoService when I try to use the AdminClient to deploy the wsdd?
I have tried using both 1.2 and 1.2.1.
I am going to try to use an older verison to see if this is a bug..
If any one know the answer to this deployment problem please speak up.

Problem during implementation of SP5 in PI 7.1 EHP 1

Similar Messages

Maybe you are looking for