Problem during installation of Integration (SAP BO 2007) with CLUSTER

I've a problem during the installation of SAP BO Integration version 2007 SP00 PL15.
The InstallShield Wizard make a test to connection to SQL Server database SBO-COMMON and the test have a negative result:
"Unable to connect to database; verify database server name and that database is started".
I've alredy installed the integration without problem on a normal server, but this problem is on a cluster.
More information of the system are:
- Windows enterprise 2003 SP1 (2 server cluster fail over)
- SQL Server 2005 SP2 (cluster)
It seems that it can't find the SQL on the cluster.
Thanks and help me!

dear Teun,
Is important to know well SQL Server 2005.
Go to Programs->MS SQL Server 2005-> Configuration tools-> SQL Server Configuration Manager.
Into the window, select: SQL Server 2005 Network Configuration -> Protocols for MSSQLSERVER > TCP/IP
Here, you must set the IP address of your server (Ex. 192.168.0.55), not Dynamics Address.
In the "all" instance, specify the Dynamic port 1433.
Now, you can install Integration without problems (is not necessary set the node name in tha installation wizard, because the system is not able to select it)
Regards
Flavio

Similar Messages

Problem during installation of oacle patchset 10.2.0.2

I am facing the following problem during installation of oracle patchset 10.2.0.2 with SAP SRM 3.0 (with EBP 4.0) on HP-UX IA64. Already my system has oracle patchset 9.2.0.7 installed. Experts' opinion required urgently please..
prompt> ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be B.11.23.    Actual B.11.23
                                      Passed
Checking swap space: must be greater than 250 MB.   Actual 32000 MB    Passed
Checking Temp space: must be greater than 250 MB.   Actual 1796 MB    Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2008-04-14_01-40-53PM. Please wait ...
Error in writing to directory /tmp/OraInstall2008-04-14_01-40-53PM. Please ensure that this directory is writable and has atleast 69 MB of disk space. Installation cannot continue.
: Error 0
prompt>

hi ben. I ran the runinstaller with the debug option. This is what it gave: (might be helpful for your analysis of the problem)
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be B.11.23.    Actual B.11.23
                                      Passed
Checking swap space: must be greater than 250 MB.   Actual 32000 MB    Passed
Checking Temp space: must be greater than 250 MB.   Actual 1684 MB    Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2008-04-14_07                     -42-47PM. Please wait ...unzip: cannot find ../stage/102_64/Components/oracle.s                     wd.jre/1.4.2.7.0/1/DataFiles/.jar, ../stage/102_64/Components/oracle.swd.jre/1.                     4.2.7.0/1/DataFiles/.jar.zip or ../stage/102_64/Components/oracle.swd.jre/1.4.2                     .7.0/1/DataFiles/*.jar.ZIP.
No zipfiles found.
Error in writing to directory /tmp/OraInstall2008-04-14_07-42-47PM. Please ensur                     e that this directory is writable and has atleast 69 MB of disk space. Installat                     ion cannot continue.
: Error 0

Problem during installation of iTunes 10.7 on Win7 x64. Is there anybody that can help me?

Hello everyone!
I've a problem during installation of Itunes 10.7 on Window 7 x64. I had installed v11 but i don't like it, so i've uninstalled correctly this version and i have downloaded v10.7
The message, translated in english, is:
UNKNOWN \ Components \ ... \ 2B0163E6D0340BE2758E9BEDD8.
Make sure you have sufficient access to that key, or contact your support staff.
I don't know how to do...I don't want to format my pc
I have already tried to erase all the "apple" folders on directory C:\, but nothing to do...
Is there anybody that can help a poor italian boy, please?
Thanks a lot,
Teo

Thx Polydorus!
this evening i'll try and i'll tell you if it works!
Teo

Problem during installation of EHP4 on IDES with preinstalled EHP3

I have a problem during installation of EHP4 on IDES with preinstalled EHP3(I got it with media sent last year in april).
Namely during PREP_EXTENSION/EHP_INCLUSION! phase i got error:
Severe error(s) occured in phase PREP_EXTENSION/EHP_INCLUSION!
Last error code set: Component 'WEBCUIF' not found
When checking components of ECC system I did not found 'WEBCUIF' component whereas in xml file (generated by SOLMAN) it exists. Which direction I should take. I am afraid to delete entries in xml file.
I need help

When checking components of ECC system I did not found 'WEBCUIF' component whereas in xml file (generated by SOLMAN) it exists. Which direction I should take. I am afraid to delete entries in xml file.
You need to download and install all requirements as selected by Solution Manager for EHP4, WEBCUIF is a required component. Do not delete any entries in the xml file.
Nelis

There was a problem during installation of blackberry messenger. Please try again

There was a problem during installation of blackberry messenger ( any application). Please try again, this is the message i get anytime i try to download or upgrade any application on my blackberry bold 9870. pls i need your help
Thanks
bellokeshi

bellokeshi wrote:
Blackberry appworld version: 4.0.0.63
OK, that is almost the latest version... .65 is later.
You can upgrade your AppWorld from using your BlackBerry browser to go to www.blackberry.com/appworld
After you upgrade, Do a simple reboot on the BlackBerry in this manner: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot.
IF then you don't see or can't find the AppWorld icon, please post back here.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Problem during installation of patch 9.2.0.5

Good morning,
I tried to install the patch 9.2.0.5 ID 3501955 but I've encoured a problem during
installation.
I've got a warning who asked me to stop somes services:
OracleMTSRecoveryService, OracleOraHome92TNSListener,
OracleOraHome92Agent et OracleServiceBETA.
After stopping it, I tried to install the patch again but I've got the
following error: "No service associated with process that use it" and
installation process stop at this point.
I would like to know if you succeed to install this patch and if you've
got an idea to fix my problem.
Regards.

Did you run the catpatch.sql after the patch 9.2.0.5? You have to complete the post installation tasks as specified in the readme. We have a 9205 installation and have all the aw & awm packages in it.
regards
suresh

Integration SAP Bidding Engine with SUS

Hi friends
Could you tell me, that does it mean u2013 integration SAP Bidding Engine with SUS?
Does it mean that we should have tow deferent system (or deferent clients) one for vendors and another one for us and integrated them?
There can I find more information about it?
Thanks

Hi,
[http://service.sap.com/ibc-srm|http://service.sap.com/ibc-srm]
Configuration Guide for Service Procurement.
Regards,
Masa

Problems during installation of SAP NetWeaver 7.01 - ABAP Trial Version

Anyone who has successfully installed this trail version?HELP HERE
Please come up with some problems you faced during installation and the way you rectified those problems
For e.g:
Problem:
'Partner' 127.0.0.1: sapdp00 'not reached WSAECONNREFUSED: Conection refused. "
Solution:
Points not a constraint for the right answer.Please provide the solution guys.

Since the trial version is very sensitive regarding other software on the same system, I loaded it onto a clean installation of Windows Server 2003 within Microsoft Virtual PC. No installation problems ever since!
It should be enough to provide the virtual machine with 0.5 GB of memory, but you'd better spare 2 or 3 GB for that...
(This also has the nice side effect that it's reachable from the complete home network )

Problem During Installation of ECC 6 on Windows 2003

Here I am facing problem during Import ABAP Phase.
It is throwing Error like that::
CJS-30022 Program 'Migration Moitor' exists with return code 103.
After completeing 9 stages, it's getting problem in Import packages and installation get stucked.
My Server is like that:
OS: Windows Server 2003
Hardware: HP Itanium IA64
Database: Oracle 10.2g
SAP Release : 2004s ECC 6
I have configured Java with j2sdk 1.4.2_12:
JRE 1.5 is not available for IA64 .
I reconfigured the parameter "shared_pool_size" (to 400MB)in init<sid>.ora at \oracle\<sid>\database.
Also adjusted another parameter which is "shared_pool_reserved_size" i.e. 10% of the shared_pool_size.
What to do now.
Please send me feed backs.
Regards,
Sumanta Chatterjee
 

run 'ls -lrta' in /tmp/sapinst_instdir/.... (whatever the lowest path is there, where all the log files are). You should see something like sap<something>.tsk and sap<something>.log. Look at the most recently updated sap<something>.log file for the specific error. One problem I've seen is that if you configure the advanced oracle config to turn off AUTOEXTEND on the tablespaces, the abap load will bomb because it runs out of space. Also, make sure your SYSTEM tablespace has at least 500M.
Posting the relevant contents of the log with the detailed error description would help us provide a better answer as well.
Rich

Problem during installation of Solution Manager

Hi All,
I am facing problem during the installation of solution manager. it shows following error during installation
ERROR 2010-05-21 14:39:24
FJS-00003 TypeError: this._name has no properties (in script NW_Doublestack_SCS|ind|ind|ind|ind, line 5140: ???)
ERROR 2010-05-21 14:39:25
FCO-00011 The step collect with step key |NW_Doublestack_SCS|ind|ind|ind|ind|0|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
Please also let me konw how much space do we require for installating the Solution manager as a central system on one drive?

Hi Chandan,
Well may be below SDN thread will help you... out ! try out with Curd Abstoss Response !!
Inst. SAP NW 2004s Java SP9 - Error FJS-00003 this._name has no properties
Hope it will work for you..as well !

Problem during installation of NW7.0 SR3 on Windows x64

Hello all,
I have a problem during the installation of a new central instance.
During the phase 38 "Install Software units", SAPINST shows that logs :
Jul 30, 2008 1:41:10 PM Info: Ending deployment prerequisites. All items are correct.
Jul 30, 2008 1:41:11 PM Info: Saved current Engine state.
Jul 30, 2008 1:41:11 PM Info: Starting: Initial deployment: Selected development component 'caf/eu/gp/model/eap'/'sap.com'/'MAIN_APL70VAL_C'/'1497904'/'5' will be deployed.
Jul 30, 2008 1:41:11 PM Info: SDA to be deployed: D:\usr\sap\PAD\DVEBMGS00\SDM\root\origin\sap.com\caf\eu\gp\model\eap\MAIN_APL70VAL_C\5\1497904\cafeugpmodeleap.sda
Jul 30, 2008 1:41:11 PM Info: Software type of SDA: J2EE
Jul 30, 2008 1:41:11 PM Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) *****
Jul 30, 2008 1:41:13 PM Info: Begin of log messages of the target system:
08/07/30 13:41:11 - ***********************************************************
08/07/30 13:41:12 - Start updating EAR file...
08/07/30 13:41:12 - start-up mode is lazy
08/07/30 13:41:12 - EAR file updated successfully for 250ms.
08/07/30 13:41:12 - Start deploying ...
08/07/30 13:41:12 - EAR file uploaded to server for 93ms.
08/07/30 13:41:13 - ERROR: NOT deployed. The Deploy Service returned the following error:
                     For detailed information see the log file of the Deploy Service.
                     Exception is:
                     com.sap.engine.services.rmi_p4.P4RuntimeException: Unexpected exception.
                          Nested exception is:
                          java.net.SocketException: Connection reset
                     java.net.SocketException: Connection reset
                          at java.net.SocketInputStream.read(SocketInputStream.java:168)
                          at com.sap.engine.services.rmi_p4.Connection.run(Connection.java:395)
                          at java.lang.Thread.run(Thread.java:534)
08/07/30 13:41:13 - ***********************************************************
Jul 30, 2008 1:41:13 PM Info: End of log messages of the target system.
Jul 30, 2008 1:41:13 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Jul 30, 2008 1:41:13 PM Error: Aborted: development component 'caf/eu/gp/model/eap'/'sap.com'/'MAIN_APL70VAL_C'/'1497904'/'5', grouped by software component 'SAP-EU'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.14.0.20071210153525''/'5':
Caught exception during application deployment from SAP J2EE Engine's deploy API:
com.sap.engine.deploy.manager.DeployManagerException: ERROR: NOT deployed. The Deploy Service returned the following error: com.sap.engine.services.rmi_p4.P4RuntimeException: Unexpected exception.
     Nested exception is:
     java.net.SocketException: Connection reset
Exception is:
com.sap.engine.services.rmi_p4.P4RuntimeException: Unexpected exception.
     Nested exception is:
     java.net.SocketException: Connection reset
java.net.SocketException: Connection reset
     at java.net.SocketInputStream.read(SocketInputStream.java:168)
     at com.sap.engine.services.rmi_p4.Connection.run(Connection.java:395)
     at java.lang.Thread.run(Thread.java:534)
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).DMEXC)
Jul 30, 2008 1:41:13 PM Info: Starting to save the repository
Jul 30, 2008 1:41:13 PM Info: Finished saving the repository
What can I do to validate that step ?
Thanks in advance,
Edited by: Alexandre Belgrand on Jul 30, 2008 1:48 PM

Hi,
I had same problem.i resolved it by reinstalling OS and configuring high Page file.
Please set the max and min Page file size of same value.
and also do the java memory tuning as per SAP Notes.
Regards,
Sandeep Nayak

Pacman problem during installation process

Hello,
I have serious problem with installing arch on my machine, during installation packages pacman completely broke system, it prints kernel bug message, output is here:
http://pastebin.com/m70565353
its from x86_64 2009.02 image, but same problem with i686 image 2009.02 and 2008.06 too, hardware is intel little falls so nothing special, simply there is no way to install arch on my machine
thanks for any advice

I get this error every time at point Install Packages, it hangs randomly on packages, on i686 it completely locks, on x86_64 after pacman failure I can still type to terminal and possibly control installator but init 0 or 6 freeze. I tried every time on fresh created filesystem. It seems like pacman bug, next I try install some packages manually from terminal.

Problem during installation of WAS patches

hi,
when i am applying WAS patches,the process staggers for a very long time (nearly a day)at the "deploying online" step.does this take this long?...could someone suggest waht should be done?..
regards,
Uma

Hi Umberto,
I got similar problem while installation stop at 41% and swapped to second CD (data 1). It hangs at message "Creating CoProcess SAPCAR ....".
After reading some other posted message, I created CD images of WAS 6.20 - second CD (data 1) and third CD (data 2), mounted them as virtual drives on XP Pro. Restart the installation again, when prompt to locate second CD, I selected the virtual drives. After hanging for several minutes at 41%, the installation continue..... prompt to locate third CD.... until 100% installation complete. I know this is weird because I have no problem to install on my notebook by changing CD physically. This problem is only happen on my desktop using intel G31 mobo and E8500 cpu.
Hope you can complete the installation.
Regards,
Donald

Problem during installation in HP Proliant DL380P Gen8

Dear All,
We have HP Proliant DL 380P Gen8 machine, i am facing some issue during installation oracle linux ver 5, please help me regaring the following points;
1. Is this machine compatible to install Oracle Linum Software?
2. If yes, then we have faced attached error; please guide me to resolve it;
Regards,
Akhtar

Hi:
You may also want to post your question on the HP Business Support Forum -- DL Servers section.
http://h30499.www3.hp.com/t5/ProLiant-Servers-ML-DL-SL/bd-p/itrc-264#.VQGkMHl0y9I

Integrating SAP Java Connector with SAP XI

Hi XI experts
We are about to integrate our SAP ERP2004 system with a new WMS system. The vendors of the WMS system normally integrates with ERP directly through SAP Java Connector, but we would like to put SAP XI between the two systems so we have good way of monitoring the messages beeing sent.
I would like to make a synchronous test scenario where we send a ARTMAS idoc from SAP to XI which sends it to the WMS. After WMS system receives the ARTMAS Idoc it sends an acknowledgement back to XI which passes it on to SAP.
The integration would then look like this:
SAP ERP <-> SAP XI <-> WMS (Jco)
Is this scenario possible? And if so, how would you suggest to set it up?
I was thinking of using the RFC adapter to connect to the Java Connector of WMS, but am not sure if this is the right approach or how it should be set up.
Any help or comments would be greatly appreciated.
Best Regards
Chris

I have made a setup like this:
SAP <-> XI <-> WMS
The Scenario is like this:
SAP sends an ARTMAS03 idoc to XI which maps it directly to the same ARTMAS03 idoc structure (need a few changes in the future so thats why im not using IDOC tunnelling) then it uses a RFC receiver adapter to connect to our SAP gateway, where the WMS is registrered through JCO.
When I first sent the idoc, i got a "RfcAFWException: failed to read funtionname from XML document: missing namespace declaration(2)" then after reading Q23 in note 730870, I used the RFCNormalizer xslt to change the namespace to a "urn:sap-com:document:sap:rfc:fuctions" instead of the "urn:sap-com:document:sap:idoc:messages". The error is now "functiontemplate from repository was <null>".
As far as i can see the error is because the metadata repository defined in the RFC adapter cant find the function module that normally would be in the root of a RFC-XML. But I dont know how I can send an Idoc through the rfc adapter to the gateway then. Anyone got some ideas?
Thanks
Chris

Problem during installation of Integration (SAP BO 2007) with CLUSTER

Similar Messages

Maybe you are looking for