Problem during installation of iTunes 10.7 on Win7 x64. Is there anybody that can help me?
Hello everyone!
I've a problem during installation of Itunes 10.7 on Window 7 x64. I had installed v11 but i don't like it, so i've uninstalled correctly this version and i have downloaded v10.7
The message, translated in english, is:
UNKNOWN \ Components \ ... \ 2B0163E6D0340BE2758E9BEDD8.
Make sure you have sufficient access to that key, or contact your support staff.
I don't know how to do...I don't want to format my pc
I have already tried to erase all the "apple" folders on directory C:\, but nothing to do...
Is there anybody that can help a poor italian boy, please?
Thanks a lot,
Teo
Thx Polydorus!
this evening i'll try and i'll tell you if it works!
Teo
Similar Messages
-
I´ve so many privat things on I tunes like pictures, music etc.and i won´t loose them. is there anybody who can help me to save my private things and help me to solve teh problem
Thanks you for help greetings from austriaI just had the same error:
R6034
An application has made an attempt to load the C runtime library incorrectly. Please contact the apps support team for more info.
I went to http://support.apple.com/kb/ht1925 and did a complete removal and reinstallation of iTunes. You MUST follow the directions here exactly...it's more than just iTunes that must be removed, and it MUST be done in the order in which the support article says. I followed the exact instructions, and iTunes is back on my machine (no more C runtime error) and you do NOT lose your music...it's all in my library, as it was before.
Good luck! -
i downloaded the latest update ios 7.0.4 and update my iphone 5, but to my surprise i couldnt locate the downloaded file on itunes and i've also checked my itunes folder, still cant see the file. pls anybody who can help.
The downloaded file is probably stored at C:\Users\<User>\AppData\Roaming\Apple Computer\iTunes\iPhone Software Updates. In general it is probably best to "download and install" updates than download and then install later. Note that you cannot revert to the older firmware if you don't like the update, even if you have the old .ipsw files.
tt2 -
Problem during installation of NW7.0 SR3 on Windows x64
Hello all,
I have a problem during the installation of a new central instance.
During the phase 38 "Install Software units", SAPINST shows that logs :
Jul 30, 2008 1:41:10 PM Info: Ending deployment prerequisites. All items are correct.
Jul 30, 2008 1:41:11 PM Info: Saved current Engine state.
Jul 30, 2008 1:41:11 PM Info: Starting: Initial deployment: Selected development component 'caf/eu/gp/model/eap'/'sap.com'/'MAIN_APL70VAL_C'/'1497904'/'5' will be deployed.
Jul 30, 2008 1:41:11 PM Info: SDA to be deployed: D:\usr\sap\PAD\DVEBMGS00\SDM\root\origin\sap.com\caf\eu\gp\model\eap\MAIN_APL70VAL_C\5\1497904\cafeugpmodeleap.sda
Jul 30, 2008 1:41:11 PM Info: Software type of SDA: J2EE
Jul 30, 2008 1:41:11 PM Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) *****
Jul 30, 2008 1:41:13 PM Info: Begin of log messages of the target system:
08/07/30 13:41:11 - ***********************************************************
08/07/30 13:41:12 - Start updating EAR file...
08/07/30 13:41:12 - start-up mode is lazy
08/07/30 13:41:12 - EAR file updated successfully for 250ms.
08/07/30 13:41:12 - Start deploying ...
08/07/30 13:41:12 - EAR file uploaded to server for 93ms.
08/07/30 13:41:13 - ERROR: NOT deployed. The Deploy Service returned the following error:
For detailed information see the log file of the Deploy Service.
Exception is:
com.sap.engine.services.rmi_p4.P4RuntimeException: Unexpected exception.
Nested exception is:
java.net.SocketException: Connection reset
java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(SocketInputStream.java:168)
at com.sap.engine.services.rmi_p4.Connection.run(Connection.java:395)
at java.lang.Thread.run(Thread.java:534)
08/07/30 13:41:13 - ***********************************************************
Jul 30, 2008 1:41:13 PM Info: End of log messages of the target system.
Jul 30, 2008 1:41:13 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Jul 30, 2008 1:41:13 PM Error: Aborted: development component 'caf/eu/gp/model/eap'/'sap.com'/'MAIN_APL70VAL_C'/'1497904'/'5', grouped by software component 'SAP-EU'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.14.0.20071210153525''/'5':
Caught exception during application deployment from SAP J2EE Engine's deploy API:
com.sap.engine.deploy.manager.DeployManagerException: ERROR: NOT deployed. The Deploy Service returned the following error: com.sap.engine.services.rmi_p4.P4RuntimeException: Unexpected exception.
Nested exception is:
java.net.SocketException: Connection reset
Exception is:
com.sap.engine.services.rmi_p4.P4RuntimeException: Unexpected exception.
Nested exception is:
java.net.SocketException: Connection reset
java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(SocketInputStream.java:168)
at com.sap.engine.services.rmi_p4.Connection.run(Connection.java:395)
at java.lang.Thread.run(Thread.java:534)
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).DMEXC)
Jul 30, 2008 1:41:13 PM Info: Starting to save the repository
Jul 30, 2008 1:41:13 PM Info: Finished saving the repository
What can I do to validate that step ?
Thanks in advance,
Edited by: Alexandre Belgrand on Jul 30, 2008 1:48 PMHi,
I had same problem.i resolved it by reinstalling OS and configuring high Page file.
Please set the max and min Page file size of same value.
and also do the java memory tuning as per SAP Notes.
Regards,
Sandeep Nayak -
Please answer as soon as possible.
Have you tried a rest or hard reset?
Hold your power button and your home button for about 15 seconds until you see the apple logo.
Ignore the power slider when you see it. -
Problem during installation of SAPNW2004sABAPTrialSP11
Hi all,
I tried to install SAPNW2004sABAPTrialSP11 on my PC. The installation process ended with success after 1 hour but unfortunately when I tried to logon from SAPGUI the system it doesn't work. In particulary the message that occurred was more or less the follow one: "shut down application server".
Is there anybody that can help me?
Thanks
Gino BonfiglioliHi Sunil,
I tried to install SAPNW2004sABAPTrialSP11 again but the sams error occured. The message that I see after the SAPLOGON is the following one:
"Partner not reached (host 127.0.0.1, service sapdp00)
WSAECONNREFUSED:Connection refused"
Here down I send you the file you asked me last time:
<b>dev_disp:</b>
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, ASCII, optimized
pid 3524
Sat Apr 28 17:40:27 2029
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3524) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 95 successfully loaded
shared lib "dw_xtc.dll" version 95 successfully loaded
shared lib "dw_stl.dll" version 95 successfully loaded
shared lib "dw_gui.dll" version 95 successfully loaded
shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Sat Apr 28 17:40:32 2029
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >PC_Gino_NSP_00 <
DpShMCreate: sizeof(wp_adm) 6328 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 04E30040, size: 4205552)
DpShMCreate: allocated sys_adm at 04E30040
DpShMCreate: allocated wp_adm at 04E31A28
DpShMCreate: allocated tm_adm_list at 04E332E0
DpShMCreate: allocated tm_adm at 04E33310
DpShMCreate: allocated wp_ca_adm at 051A35A0
DpShMCreate: allocated appc_ca_adm at 051A3A50
DpShMCreate: allocated comm_adm at 051A3F00
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05224DB0
DpShMCreate: allocated gw_adm at 05224DF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05224E20
DpShMCreate: allocated wall_adm at 05224E28
MBUF state OFF
DpCommInitTable: init table for 500 entries
Sat Apr 28 17:40:33 2029
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
Sat Apr 28 17:40:35 2029
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( PC_Gino) [dpxxdisp.c 11663]
DpStartStopMsg: send start message (myname is >PC_Gino_NSP_00 <)
DpStartStopMsg: start msg sent
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
Sat Apr 28 17:40:36 2029
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 95
Release check o.K.
Sat Apr 28 17:41:15 2029
ERROR => W0 (pid 1980) died [dpxxdisp.c 14318]
ERROR => W1 (pid 248) died [dpxxdisp.c 14318]
ERROR => W2 (pid 3820) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9f --> 0x9e
ERROR => W3 (pid 268) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9e --> 0x9c
ERROR => W4 (pid 3608) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9c --> 0x98
ERROR => W5 (pid 3948) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x98 --> 0x90
ERROR => W6 (pid 272) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x90 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1617
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Apr 28 17:41:25 2029
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Sat Apr 28 15:41:25 2029
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 1980 Ended no 1 0 0
1 DIA 248 Ended no 1 0 0
2 DIA 3820 Ended no 1 0 0
3 UPD 268 Ended no 1 0 0
4 ENQ 3608 Ended no 1 0 0
5 BTC 3948 Ended no 1 0 0
6 SPO 272 Ended no 1 0 0
Dispatcher Queue Statistics Sat Apr 28 15:41:25 2029
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
4
4
2000
4
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 11
wake_evt_udp_now 0
wake events total 7, udp 6 ( 85%), shm 1 ( 14%)
since last update total 7, udp 6 ( 85%), shm 1 ( 14%)
Dump of tm_adm structure: Sat Apr 28 15:41:25 2029
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Sat Apr 28 15:41:25 2029
=============================
Slots: 20, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1617
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Apr 28 17:41:30 2029
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >PC_Gino_NSP_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1704) (SOFT_KILL)
Stop icman
killing process (1848) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1704 HANDLE:1580)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1617
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Apr 28 17:41:31 2029
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1704 HANDLE:1580)
wait for end of icman
[DpProcDied] Process lives (PID:1848 HANDLE:1596)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1617
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Apr 28 17:41:32 2029
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1848 HANDLE:1596)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1617
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Apr 28 17:41:33 2029
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1848 HANDLE:1596)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1617
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Apr 28 17:41:34 2029
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1848 HANDLE:1596)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1617
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Apr 28 17:41:35 2029
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1848 HANDLE:1596)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1617
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Apr 28 17:41:36 2029
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1848 HANDLE:1596)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1617
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Apr 28 17:41:37 2029
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1848 HANDLE:1596)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1617
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Apr 28 17:41:38 2029
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1848 HANDLE:1596)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1617
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Apr 28 17:41:39 2029
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1848 HANDLE:1596)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1617
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Apr 28 17:41:40 2029
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1848 HANDLE:1596)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1617
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Apr 28 17:41:41 2029
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1848 HANDLE:1596)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1617
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Apr 28 17:41:42 2029
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1848 HANDLE:1596)
DpStartStopMsg: send stop message (myname is >PC_Gino_NSP_00 <)
NiIMyHostName: hostname = 'PC_Gino'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Sat Apr 28 17:41:43 2029
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11976]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1544 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1544 (pos=2)
SiSelNRemove: removed sock 1544
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/20/7
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 14)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1544
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
Sat Apr 28 17:41:44 2029
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3524) [dpxxdisp.c 10333]
Good Bye .....
<b>dev_w0</b>
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Sat Apr 28 17:40:36 2029
B create_con (con_name=R/3)
B Loading DB library 'C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' ...
B Library 'C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' loaded
B Version of 'C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' is "700.08", patchlevel (0.95)
B New connection 0 created
M sysno 00
M sid NSP
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 95
M intno 20050900
M make: multithreaded, ASCII, optimized
M pid 1980
M
M kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1980) [dpxxdisp.c 1301]
I
I Sat Apr 28 17:40:37 2029
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 6328 (904)
M DpShMCreate: sizeof(tm_adm) 3605136 (17936)
M DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
M DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
M DpShMCreate: sizeof(comm_adm) 528048 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1280)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 04E30040, size: 4205552)
M DpShMCreate: allocated sys_adm at 04E30040
M DpShMCreate: allocated wp_adm at 04E31A28
M DpShMCreate: allocated tm_adm_list at 04E332E0
M DpShMCreate: allocated tm_adm at 04E33310
M DpShMCreate: allocated wp_ca_adm at 051A35A0
M DpShMCreate: allocated appc_ca_adm at 051A3A50
M DpShMCreate: allocated comm_adm at 051A3F00
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 05224DB0
M DpShMCreate: allocated gw_adm at 05224DF0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 05224E20
M DpShMCreate: allocated wall_adm at 05224E28
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host PC_Gino
M calling db_connect ...
C
C DBSDBSLIB : version 700.08, patch 0.095 (Make PL 0.95)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.095) MaxDB DBSL patch collection 1 2007 (note 1014270)
C (0.082) MaxDB DBSL patch collection 3 2006 (note 991258)
C (0.079) MaxDB DBSL patch collection 2 2006 (note 984406)
C (0.068) MaxDB DBSL patch collection 1 2006 (note 962708)
C (0.051) DB50 perm block defect (note 934194)
C (0.046) ADBC: invalid data when fetching cursor with hold (note 925337)
C (0.045) Signal 11 during creation of BIA index (note 920743)
C (0.038) MaxDB DBSL patch collection 2 2005 (note 908602)
C (0.034) Livecache unicode connect (use SDK 7.6.0 b11) (note 901576)
C (0.028) Disable LVC codepage checking (note 882788)
C
C
C Loading SQLDBC client runtime ...
C
C Sat Apr 28 17:40:38 2029
C SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 002-121-083-965
C SQLDBC Library Version : libSQLDBC 7.6.0 BUILD 036-123-140-088
C SQLDBC client runtime is MaxDB 7.6.0.036 CL 140088
C SQLDBC supports new DECIMAL interface : 0
C SQLDBC supports VARIABLE INPUT data : 0
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Location part contains characters which must be escaped))
[dbsdbsql.cpp 136]
B ***LOG BV3=> severe db error -10709 ; work process is stopped [dbsh#2 @ 1199] [dbsh 1199 ]
B ***LOG BY2=> sql error -10709 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> Connection failed (RTE:Location part contains characters which must be escaped) [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10240]
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server PC_Gino_NSP_00 on host PC_Gino (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Sat Apr 28 17:40:38 2029
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10439
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1980) [dpnttool.c 327]
<b>dev_rd</b>
trc file: "dev_rd", trc level: 1, release: "700"
Sat Apr 28 17:40:34 2029
***LOG S00=> GwInitReader, gateway started ( 1704) [gwxxrd.c 1693]
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 94
intno 20050900
make: multithreaded, ASCII, optimized
pid 1704
gateway runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
Sat Apr 28 17:40:35 2029
gw/local_addr : 0.0.0.0
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Monitoring Architecture disabled, MoniSegmentSize too small: 0 bytes.
ERROR => CCMS: unable to connect to montoring segment of application server! [alxxappl.c 990]
ERROR => GwInitAlertMonitor: AlInit_R3Kernel_AS failed, rc=249 [gwxxalrt.c 222]
***LOG S10=> GwInitReader, GwInitAlertMonitor () [gwxxrd.c 1825]
switch off alert monitoring
Bind service sapgw00 (socket) to port 3300
GwPrintMyHostAddr: my host addresses are :
1 : [10.10.0.10] PC_Gino (HOSTNAME)
2 : [127.0.0.1] localhost (LOCALHOST)
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
DpShMCreate: sizeof(wp_adm) 6328 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 030C0040, size: 4205552)
DpShMCreate: allocated sys_adm at 030C0040
DpShMCreate: allocated wp_adm at 030C1A28
DpShMCreate: allocated tm_adm_list at 030C32E0
DpShMCreate: allocated tm_adm at 030C3310
DpShMCreate: allocated appc_ca_adm at 03433A50
DpShMCreate: allocated comm_adm at 03433F00
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 034B4DB0
DpShMCreate: allocated gw_adm at 034B4DF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 034B4E20
MtxInit: -2 0 0
Sat Apr 28 17:41:30 2029
***LOG S30=> GwStopGateway, gateway stopped () [gwxxrd.c 14147]
Thanks the help you will give me
Gino Bonfiglioli -
My iTunes won't open . The only way to view my movies is through front row. Is there anybody that can help? Thank you
Use the Activity Monitor to force quit the loginwindow process. Save all open documents before doing this; there won't be any further confirmation prompts.
(58702) -
When I try to install the latest version (10.5) of iTunes, the following message appears: "There was a problem with this Windows Installer package. A program running during installation is terminated unexpectedly." Is there somebody who can help me?thanks
I used this site and it fixed my problems. Hoping it will help with yours too
http://support.microsoft.com/mats/Program_Install_and_Uninstall -
Errors occured during installation of itunes 11.1
I am receiving this message, errors occurred during installation before itunes coule be configured when trying to install itunes 11.1. Can anyone help?
I'm using Windows 7 64bit.I got this same error message for installing Itunes 11.4 64bit
I was able to get Itunes installed when I followed this advice here http://superuser.com/questions/169834/cant-run-windows-7-installer-error-reading -from-file Looks like admin did not have access rights to the C:\Users\username\AppData\Local\Temp directory. I added SYSTEM and Administrator to full access and then it installed properly
Had the same problem, installer couldn’t read from %temp%\folder\installer.msi
(%temp%=C:\Users\username\AppData\Local\Temp). Added full rights for user SYSTEM on %temp% folder and installer ran just fine -
Hi,
There was ios 4.1 in my iphone3gs.i have tried to update it through itunes but there is a problem.After installation through itunes,there is problem that it is not activating my iphone and shows a message that your iphone could not be activated because the activation server is temporarily unavailable,try connecting your iphone to itunes to activate it,or try again in a couple of minutes.i tried many times but it again shows the same message,
after installation,when i connect my iphone to itunes it shows a message that we are unable to activate your iphone at this time please try again or contact customer care.please reply me urgently to resolve this problem.That is usually a symptom thet the phone was hacked or jailbroken. Was it?
-
I have a PC with windows 8.1. My itunes folder is stored on external drive. I haven't used itunes for a while. I got a message to update to itunes 11.3.1. I got error message that "registry settings used by itunes for importing and burning CD's/DVD's has stopped working" I uninstalled itunes and attempted to reinstall. Now i get message" error occurred during installation before itunes could be configured" How do I fix this.
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
I am trying to install iTunes on my computer and everytime I do it says
"error occured during installation before iTunes could be configured. Your system has not been modified" how do I fix this?Hi,
Maybe the radio connection on the other end is not working. Hope this helps.
xxmitchxx90 -
Problem during installation of oacle patchset 10.2.0.2
I am facing the following problem during installation of oracle patchset 10.2.0.2 with SAP SRM 3.0 (with EBP 4.0) on HP-UX IA64. Already my system has oracle patchset 9.2.0.7 installed. Experts' opinion required urgently please..
prompt> ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be B.11.23. Actual B.11.23
Passed
Checking swap space: must be greater than 250 MB. Actual 32000 MB Passed
Checking Temp space: must be greater than 250 MB. Actual 1796 MB Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2008-04-14_01-40-53PM. Please wait ...
Error in writing to directory /tmp/OraInstall2008-04-14_01-40-53PM. Please ensure that this directory is writable and has atleast 69 MB of disk space. Installation cannot continue.
: Error 0
prompt>hi ben. I ran the runinstaller with the debug option. This is what it gave: (might be helpful for your analysis of the problem)
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be B.11.23. Actual B.11.23
Passed
Checking swap space: must be greater than 250 MB. Actual 32000 MB Passed
Checking Temp space: must be greater than 250 MB. Actual 1684 MB Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2008-04-14_07 -42-47PM. Please wait ...unzip: cannot find ../stage/102_64/Components/oracle.s wd.jre/1.4.2.7.0/1/DataFiles/.jar, ../stage/102_64/Components/oracle.swd.jre/1. 4.2.7.0/1/DataFiles/.jar.zip or ../stage/102_64/Components/oracle.swd.jre/1.4.2 .7.0/1/DataFiles/*.jar.ZIP.
No zipfiles found.
Error in writing to directory /tmp/OraInstall2008-04-14_07-42-47PM. Please ensur e that this directory is writable and has atleast 69 MB of disk space. Installat ion cannot continue.
: Error 0 -
Problem during installation of EHP4 on IDES with preinstalled EHP3
I have a problem during installation of EHP4 on IDES with preinstalled EHP3(I got it with media sent last year in april).
Namely during PREP_EXTENSION/EHP_INCLUSION! phase i got error:
Severe error(s) occured in phase PREP_EXTENSION/EHP_INCLUSION!
Last error code set: Component 'WEBCUIF' not found
When checking components of ECC system I did not found 'WEBCUIF' component whereas in xml file (generated by SOLMAN) it exists. Which direction I should take. I am afraid to delete entries in xml file.
I need helpWhen checking components of ECC system I did not found 'WEBCUIF' component whereas in xml file (generated by SOLMAN) it exists. Which direction I should take. I am afraid to delete entries in xml file.
You need to download and install all requirements as selected by Solution Manager for EHP4, WEBCUIF is a required component. Do not delete any entries in the xml file.
Nelis -
After installing the lates version of itunes on my Sony Vio, a bubble pops up which says:
iTunes installation complete, ERROR occured during installation before iTunes could be configured. Your system has not been modified. To complete the installation process, run the installation again.
I did this, but this bubble keeps appearing. What do I need to do?Hello there, glenkram.
The following article outlines great steps to try for troubleshooting your very issue:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.
Maybe you are looking for
-
Count words in each sentece in a file
Hi all i want to ask how can i count words in each sentece in a file?? ie if i have the follwoing sentece i ate the cake. today is Sundy. i went to school 5 day a week. to have the number as 4 3 8 any ideas??
-
Yesterday, everything was working fine. I sync'd last night, and when I went to play the games on my Touch...nothing. The game seems like it's going to start, but then it just goes back to the main apps menu screen.
-
FM/BAPI for Post Goods Recipt and Reservations
Hi All, Is there any BAPI/FM for posting Goods receipt and Reservations . Please send some sample example to post goods receipt using Inbound Delivery & Reservations Thanks Bobby
-
Dear all, We are on Oracle 11gR2, some of our developers ran one query and it is taking huge cpu resources, I tried to kill the session but whenever I kill the session a new session starts automatically. I tried to disconnect session using "ALTER SYS
-
How to configure trunk promiscuous?
Hi Guys. how to configure trunk promiscuous?; i have and access switch connected to a core switch and them to a third party Firewall by an trunk interfaces. I need to have a promiscuous to CORE?; The trunk port to the firewall needs to be a trunk pro