Problem during the update of Data from 2 ODS into 1 ODS
Hi Guru's ,
Please help me in resolving the issue below.
I have 2 ODS , ODS1 and ODS2
with same key field as 'A' but diffrent data feilds.I want to merge the records from ODS1 and ODS2 into ODS3 with the same key as 'A'.
When I load from ODS1 all the fields are populating but when I load ODS2 the monitor says everything is OK and say x number of records got transfered. But when I check the ODS3 table , all the feilds coming from ODS2 are blank.
What should be the reson behind this?
Please help.
Thanks in Advance.
I am taking the question Back.
Similar Messages
-
Keynote document saved in icloud not updating with data from Numbers? is icloud the problem
keynote document saved in icloud not updating with data from Numbers? is icloud the problem.
If both files are held locally on the computer it looks like there is no problem however if you try and do it though icloud (ie your docs are saved on icloud) you dont get the "source" oprion besides the graph etc. Is this a but or a broken function due to the new implementation of icloud.Hi sebnor31,
This is Visual C# forum, but your question seems not related to Visual C# language itself. It most likely related to the bluetooth message transaction protocal or with the device itself.
I'll move your question to [where is this forum for...] forum where the morderator may direct you to the correct forum.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I received an ITunes and Quicktime update notice on my Windows 7 PC, from Apple this morning. During the update installation, RealPlayer installed. What gives? Why is Realplayer installing with the Apple software.
Thanks for the reply. I went back to check if there was a history in windows (Event Viewer) but could not locate it in Win7. The only updates that were in the Apple Updater window were the Quicktime and ITunes. Had I let the Realplayer continue on its own, it would have installed the Google Chrome and other apps. I let it finish installing and then removed the entire program. I do not remember checking or seeing anything saying that realplayer was being downloaded until after a reboot was requested from the ITunes Update Installer.
I just thought it was strange since I do not use Realplayer and have not downloaded any software for it.
I am on a corporate PC with a pretty thick firewall, but something may have slipped through.
Thanks again for the assistance. -
the mac clients are running RDC for mac version 2.1 and they cannot connect to Windows 2008 R2 TS server. They get the error "You were disconnected from the Windows-based computer because of problems during the licensing protocol".
really appreciated if someone have a fix for this.
thanks,
/danHey,
Any proposed answer for this ?
I face the same problem and my environment
and I've got same results as dle2k
1. TS lic mode is set to per user confirmed it works for windows clients.
2. the TS server's system log logged error "The Terminal Server security layer detected an error in the protocol stream and has disconnected the client".
3. the reports shows per user cal has been issued to users. no temp per device cal has been issued.
4. yes, CoRD works .
5. we tried version 2.1.1 of the Mac RD Client but it also does not work. -
I downloaded itunes onto my new computer, i connected my iphone during the updating process itunes failed and i lost all my purchased music from my iphone and can no longer retrieve them. I would like to know how i can reinstate the lost music please.
When you are done with this issue, consider the computer back at the office may still
have access to your iTunes account, and it should be de-auhorized. You can do that
remotely, but be sure you carefully do not mess up your other computer iTunes libraries.
Good luck & happy computing! -
In updating my iPod to 6.1.2, I received an error during the update. Now, my ipod is not rebooting. It continues to display a screen showing usb to Itunes picture. Turning off and back on, it goes back to this picture. I don't know how to reset so that I can restore from my backup.
A similar thing happened when I updated the ios on my ipad. But, I was able to reboot, and then restore from backup. How can I get my ipod to reboot and allow restore when it is not even recognized as I reconnect to my computer?Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
After a Installation from Windows 8.1/windows 7 everything works fine. For example Install updates and Software. If I connect the first time a remotefx card i can use RDP as well. But if i restart the host I get the mentioned error. What can I do. These
Hosts are not in a domain configuration. I tried it too but there was no difference. I didn't discovered any errors in the eventlog, too. Only an actviex error. But same errors occurs with a succsefull rdp session.
Also strange is if i start the vm without a remotefx card it works fine again. Only session with a Remotefx card aren't possible anymore.
Is there a bug or something. I tried it many times with the same error.
Maybe someone can help me.
kind regards
TobiHi Tobi,
Thank you for posting in Windows Server Forum.
For a workaround, please try to perform the two steps.
1. Do NOT enable RDP 8 on the Windows 7 SP1 VM. You should install RDP 8 and update the ICs though.
2. Change the connection setting on the client from "Automatically detect" to "LAN"
Please check again below thread for information.
a. "The remote session was disconnected
because there were network problems during the licensing protocol" after enabling RemoteFX Windows 8 VM
(Please recheck answer by “dgeddes”)
b. "The remote session
was disconnected because there were network problems during the licensing protocol" After Installing RemoteFX
Hope it helps!
Thanks,
Dharmesh -
Runtime error in updating initialization data from ODS in to an Infocube
Hi experts,
i have uploaded the init request in to an ODS.Now when i am trying to update this init request by selecting <b>Update ODS Data in to data target</b> fron the context menu of ODS I am getting Short dump saying:
MESSAGE_TYPE_X" C
SAPLRSSM" or "LRSSMU36"
RSSM_OLTPSOURCE_SELECTIONS.
furthermore as i am udating data from an ODS to infocube, would the esource system be my BW system it self.
Please help me ASAP.
Thanks in advance.
Jitendra Joshihi Jagdeesh,
thanks for your help.it has probably solved the problem i was previously facing but now when i am trying to schedule the update , it is getting faild along with following error message:
The InfoSource 80FIGL_O02 specified in the data request, is not defined in the source system.
the system suggest following solution :
In the Administrator Workbench of the Business Information Warehouse, update the metadata for this source system, and delete the InfoPackages belonging to InfoSources that no longer existing .
I tried it by replicating datasource but it has not solved the problem.
Please Help ASAP.
i have assigned point to for the solution you gave...........
Thanks in advance
Jitendra Joshi -
Problem in setting user end date from oim to account expiry date in AD process form
Hi all,
i am updating the user end date from oim to user account expiry date in ad process form using oim api.
i am able to get the end date value from oim but when i am setting it using api it through exception but all other attribute i am able to update in process form.
i am facing the problem only with end date field because of different date format in OIM and AD .
so please suggest me what are date format in Active Directory and how can i change the oim date format to Active directory time format in in my java code.Thanks for the reply.
But all iplanet users need not contain end date attribute, and its an update on existing user.
Can you please ellaborate more on Transformation class..?? example should be helpful. -
I have an original Ipad, I tired to update it, but during the update it gave me an error message (1602) an now it just has a picture of itunes and a ubs cord? Please help!!
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
Problem during the simulation of IP Xilinx EM-DI-40GEMAC-PROJ
Hello,
I'm currently working with the IP Xilinx EM-DI-40GEMAC-PROJ and during a simulation i got a two errors when sending 20000 frames.
The test consist in creating a loopback with two instance of Xilinx EM-DI-40GEMAC-PROJ. I write data on the LBUS interface on the first IP, the data go to the second IP, then go into a FIFO, then the data from the fifo enter the second IP and i read the data on the output port of the LBUS interface in the first IP.
so the data path is the following :
input LBUS IP 1 => output serdes IP 1 => input serdes IP 2 => output LBUS IP 2 => input FIFO =>
=> output FIFO => input LBUS IP 2 => output serdes IP 2 => input serdes IP 1 => output LBUS IP 1
the data sends where the same for the 20000 frames, six words of 256 bits and a seven one with only 32 bits.
i check that the data where send as they should be, in compliance with the LBUS protocol.
A new frame was send 100ns after the previous one was send.
when i check for the two errors, i see no problem during the first phase of the test (before the fifo) but during the other, in found two frame with bad FCS status
could you please help me resolve this issue
kind regards
Raphaël Lemaire You can ignore them safely if there are no critcal warnings
-
Problems with the O2 blackberry data package on my Curve 3G.
I have already informed O2 about this but they claim that I should be used the blackberry support services, but nothing there helps me!
I got my Blackberry Curve 3G on September 9th this year and I put on the Blackberry Data Package bolt-on onto my phone on September 16th. I then received a text to say they've taken £5 from my credit and it will be up and running in the next 24 hours. Its now September 19th and my BBM is not working at all and I am extremely upset with the services and behaviour I have received from both O2 and Blackberry.
Is there any way you can help? If this fails, I shall be forced to go back to the shop from where I got my Blackberry from and ask for their help.
Many thanks, Jade.Can a bubble whistle Problems with the O2 blackberry data package on my Curve 3G.? The seat matures in your oar. The lad ices the pursuing method inside a resident. A judge spins against the vendor! The rose wows the hello.
filipina heart -
How to bind the data from user table into user report
Hi All,
Please assist me to bind the data from user table into user report. I did create an user table with data and create a user report template (using Query Print Layout). How can I display my data into report format which I created before? Any sample program or document I can refer?
Platform: SAPB1 2005A
Add On Language: VB.Net 2003
Thanks.
rgds
ERICHi Ibai,
Thanks for your feed back. I give you an example.
Let say now i wanna print employee list, so i will go
1. Main Menu -> Reports -> HR -> Employee List
2. Choose the Selection Criteria -> OK
3. Matrix will display (Employee List)
4. I can print the report click on print button
5. Printing report
My target
1. Main Menu -> Eric_SubMenu -> Employee List
2. Matrix will display (Employee List)
3. Print button
4. Print report
My problem
Now I would like to use my own report format. My own report format means I wanna add on my logo or do some customization within the employee report. So how I am going to do? I only able to display the employee list in matrix. How do I create a new report format and display it.
Thanks.
rgds
ERIC -
Many problems since the update - help?
Hi all,
Let me start by saying that I am, for all intents and purposes, a huge Apple booster. I have a new 24" iMac. I have an Airport Extreme. I have an iBook G3 I use for travel (I'm a journalist) and recently handed down my old G3 iMac to my son after loading it up with RAM. I extoll Apple products because they are elegant and simple, and a pure pleasure to use.
Unfortunately, this hasn't been my experience with Apple TV since the 2.0 update.
My problems since the update include:
1) My Apple TV regularly "hangs" when trying to connect to ATV content. About 50% of the time when I try to play a song or podcast or movie preview -- whatever -- instead of connecting to it, I'll get an "Accessing iTunes Store" message which, after about 30 seconds of the little spinning icon, will inevitably revert to "The iTunes Store is currently unavailable. Try again later." I have to "back out" of the submenu (e.g., "Movies" or "Podcasts" or "TV Shows"), and enter another, different submenu before it will connect. I've tried all combinations of Airport settings ( both 2.4 Ghz and 5Ghz N, mixed b/g/n), and many different channels, but this keeps on happening. I have troubleshot my network connection with my ISP, and have tested the integrity of the line at DSL Reports. The connection and line quality is fine. Connection strength: signal = 54; noise = 92. In other words, decent.
2) When attempting to play HD Trailers, it is now hit and miss whether or not they will load. Instead of a blue progress bar, my screen goes black for about 15-20 seconds. (During this time, I cannot exit out of the action by pressing 'menu' on my Apple remote; it is effectively unresponsive.) After the 15 seconds or so are up, I get the following message: "Selected content is not available. Format is not recognized" -- or something close to this. After I exit, play an SD trailer, and then hit into the same trailer again, it will often (but not always) work.
3) Album cover art flips often "stick" when turning, especially when playing songs with long, scrolling titles. (I spent a lot of time on the phone with an Apple TV Product Specialist and, after he replicated the issue, he passed on his findings to the Apple Engineering. It is, I was informed, not high on their list of priorities
4) Unplugging and then replugging the ATV to reboot causes a small electrical spark. Needless to say, I don't tempt fate by doing this any more, and instead use the "-" and "menu" restart method.
All in all, a very disappointing experience of late. Very un-Apple.
By the way, connecting to YouTube videos and Flickr contacts ALWAYS works. No problems at all with any non-Apple site accessed through the ATV. So the problem lies with Apple.
Is anyone else experiencing similar difficulties? I'm at my wit's end with this thing. Never thought I'd be saying that about an Apple product. But I want to try and solve it, so I'm asking for help. If nothing can be done, I'm going to ask Apple to replace it, or return it.
Thanks in advance for your thoughts.Rick Rouse wrote:
Trust me you are not alone. Apple's "not high on their list of priorities" response is outrageous.
That was a paraphrase. The exact words, I'm afraid, I didn't write down. I wish I had, though. It was truly a beautiful example of corporate bafflegab. Something like: "since this only affects the visual aspects of the unit and not its overall performance" -- I told the (very nice) product specialist that the Apple TV was pretty well ALL AND ONLY about visuals. (FWIW, he agreed.) Anyway... -
I downloaded 4.0.1 Saturday and have had 10 updates so far, including 5 today. I am now up to 4.0.10.
Since I updated, Firefox keeps locking up while I am using it. It is now locking during the updates.
Why so many updates so soon.
What is wrong with Firefox and when am I going to be able to get on the web without locking up constantly?I have Internet Explorer as well, but, It says I need Adobe to go to Facebook. When I try to download Adobe, I says IE must be my primary browser. I have no idea how to change, do you?
Firefox is especially bad at locking up when I am playing games. Have you had this problem?
I will switch immediately if I can figure out how.
Thanks so much for any help.
Maybe you are looking for
-
I purchased Garageband. After a few months, I uninstalled my Garageband from my Ipad to try other music apps to compare. The reason I uninstalled it was because I had very little space on my Ipad. Now I went to the app store to download it again and
-
Problem in Direct Partition Exchange Loading(PEL)
Hi all, I am facing a problem during execution of a OWB mapping. The map is using direct partition exchange loading. There are one source and one target table in the map. it is very simple. While the source and target are in the same schema there is
-
Error adding printer to Bonjour
I am getting the error message "An error occurred when trying to add selected printer" when adding my HP PSC1200 connected to Airport Express via Bonjour. When I tried to add the printer manually in "System Preference" ->"Print and Fax", "Printer Bro
-
Dreamweaver Unexpectly Quits...
Hi, all. I have a PHP page I want to update, but every time I open that particular page, DW freezes. (I get the Windows message "Adobe Dreamweaver CS3 has unexpectedly stopped working," with the prompt to close program.) Other PHP pages open just fin
-
I have been able to pair them, but they wont' connect. Is there a compatibility issue? Or is there some app that I can get to make it work?