Problem during upgrade of 7.4.1 and now i cant open ITUNES!!!!!

OK so theres the upgrade box popping up. I decide of course ill update now. I click download.... and while im on the internet later on . Something appears saying a problem happened with something to do with the windows... that took 2.mb and the other upgrade took like 50mb. Since it still continued installing i allowed it. Then after it. I exited itunes to see the new features. I click on it and... i get an error saying * Itunes cannot open because it is missing some files. Please reinstall. * IM a lil irritated that an update did that. But wat the **** i just reinstalled and then... while unistalling the same box appears. i X it and the unistallation finishes.
when i restart i install it again( this was my old version 7.1) and during the installation the same stupid box appeared. but the installation continued. When it was finished i took my mouse clicked on itunes and....
THE STUPID BOX IS BACK!!!!!! reinstalling did not help. This ***** i need my musiuc and thats like 800songs that will only work with itunes. PLEASE HELP

omg. I download the new version off the site and now it works. Sorry . This problem was resolved about 30 seconds after i posted it XD

Similar Messages

  • Ive downloaded the latest version of itunes and now i cant open itunes. it says im missing something but when i go to download it again just to be safe it keeps saying the same thing and i cant open my itunes anymore

    I cant open my itunes. it said i needed to download the 10.5.2 version to be able to upload the songs to my new ipod (touch) and when i went to do that my itunes wont open at all. me and my mom tried everything. i even went on my brothers account to get at least some songs and his did the same thing even though i didnt download it to the newest version. after i downloaded the lastest version and tried to open my itunes it said it was missing something so i went and downloaded it again. i know that was probably bad to do but i didnt know what else to do. even though i went and did that it keeps saying that im missing something. i dont know what to do to get my itunes to work again and if ill have to redownload all my songs and videos again.
    Pleas help.
    Thanks much,
    Sammii

    Plug your iPod into your computer, it will begin to sync. Now check to see if the playlists have been added.
    If not, go to the songs tab under your iPod when it is connected to iTunes, Unless you have checked "Sync all songs (or something to those words)" you should have an option on what you can put on your iPod. Make sure to check the playlists that you want on your iPod.

  • HT203175 My Windows XP recently had an automatic update and now when I open iTunes, I receive the message "This copy of iTunes is corrupted or is not installed correctly.  Please reinstall iTunes."  I have never had problems in the past.  Is this a real m

    My Windows XP software recently had an automatic update and now when I open iTunes, I receive the message "This copy of iTunes is corrupted or is not installed correctly.  Please reinstall iTunes." 
    I have not used iTunes for several weeks so the issue may not be related to the last Windows XP automatic upgrade.  I have never had problems with iTunes in the past.  Is this a real message or perhaps a virus?
    Before I reinstall iTunes, any thoughts?

    It's a real message.
    Let's try a repair install of iTunes.
    Restart the PC first.
    If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
    If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
    Can you launch your iTunes now?

  • Error Message reads: this application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem.  I have re-installed, SO many times and I still cant open iTunes.

    Hi Support,
    I am becoming anxious because no matter what I try it doesnt seem to allow me to open itunes.
    Error Message reads: this application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem.
    I have re-installed, SO many times and I still cant open iTunes.
    Please help!!

    Click here and follow the instructions.
    (98888)

  • All of a sudden I'm getting a 'itunes.exe - system error  It says the program can't start because MSVCR80.dll is missing from your computer.  Try reinstalling the program to fix this problem.  I have tried to reinstall and still can't open itunes.  help!

    all of a sudden I'm getting a 'itunes.exe - system error  It says the program can't start because MSVCR80.dll is missing from your computer.  Try reinstalling the program to fix this problem.  I have tried to reinstall and still can't open itunes.  help!

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • I just upgraded to OS X Yosemite and now I cannot open an existing project in ibooks author

    I just upgraded to OS X Yosemite and now I cannot open an existing project in ibooks author

    The Quicken issue has been a hot topic in the Quicken forum as well as many others.  Intuit did not provided an updated Quicken when Lion came out.  I believe that within the past month Intuit has announced a version that does work in Lion, I looked into it, but was not impressed; there were some technical issues that prevent me from using it (don't recall the details though).  Fortunately, I found out about the Quicken mess when Lion came out, and like many users, migrated the quicken data files over to a common format that could be imported into a number of new financial apps like iBank.  Intuit lost a lot of Mac users over this.
    As for Excel and Word, you have to buy Microsoft's newest version of Office on Mac to be compatible.

  • HT4623 I upgraded my Ipad to IOS7 and now I cant log on to my apple ID although I can log on on the PC

    I upgraded my Ipad to IOS7 and now I cant log on to my apple ID although I can log on on the PC.. Any one know how to solve this?

    You need the owner of the account to remove the iPhone from their Apple ID, there is no way around this sorry.

  • I changed itunes options the other day to only synch one playlist and now when I open itunes I can't access my library.

    I changed itunes options the other day to only synch one playlist and now when I open itunes I can't access my library or any playlists. 

    I think I fixed this problem a few years ago by literally copying and pasting all my audio content into the iTunes library folder. I can't remember what is called of the top of my head and I don't know if this will still work.

  • TS1490 updated to new verison and now it wont open itunes store..

    updated to new verison 10.63 and now it wont open itunes store..very vey upset.

    it just says accessing itunes store but will not open
    Many thanks.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • I tried to download the latest itunes update, but received an error and now can't open itunes at all. Help?

    i tried to download the latest itunes update, but received an error and now can't open itunes at all. Help?

    Hello bajura007,
    Thank you for the details of the issue you are experiencing with installing the latest iTunes update.  I recommend following the steps below:
    Resolution
    Follow these steps to resolve the issue:
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    When you get to the step to uninstall iTunes, it is important to uninstall iTunes and the related components in the order listed in the link for that step.
    You can find the full article here:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Did latest update for itunes and now can't open Itunes. Get pop of :itunes was not installed correctly.Please reinstall itunes. Error 7 (Windows Error 126). Have reinstalled various times and still can't open itunes. Please help.

    Did latest update for itunes and now can't open Itunes. Get pop of :itunes was not installed correctly.Please reinstall itunes. Error 7 (Windows Error 126). Have reinstalled various times and still can't open itunes. Please help.

    Repair Apple Application Support.
    START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button

  • I reset my password and now I cannot open Itunes, what do I do?

    I reset my password and now I cannot open Itunes, what do I do?

    The program does not open, I am using Vista.  I just went through repair and it started several days ago after a year of not working.  Now I am back to the same problem

  • Just upgraded to vista and now can't open itunes

    I just upgraded to vista (what a pain) I have uninstalled itunes and then reinstalled itunes but I still can't open it. This is what happens. When I click on the itunes icon I get the licence agareement which I check agree and when it goes away I get an error message which says: "The folder Itunes is on a locked disk or you do not have write permissions for this folder." I have tried clicking on the Itunes icon and have gone to itunes properties control panel and clicked on security and tried to get permission many times. After reading post's on this fourm I went to the itunes folder on my c drive and went to the same control panel and tried again but to no avail. I had no trouble with itunes on XP and have used it for years. Btw I can open Quicktime player but it will not play my video files (I don't care because quicktime is not my default player). but I can open it.
    I have an Ipod nano and I want to use it to listen to audio books but I can't load them onto it without itunes.
    Thanks for any help in advances
    tiger8384

    Yes I still have a problem. This is what it is in a nutshell. With User Account Control on in vista I can't open itunes. I am not sure what happens when I try but here goes. First I have installed itunes into my computer and have an icon on my desktop. When I click on that icon the first thing that happens is that I get a licenses agreement which I accept. As soon as I accept the agreement it goes away and I get an error message that says “The folder Itunes is on a locked disk or you do not have write permissions for this folder." The only option that the error message gives me is to say “OK”. When I click on the OK button on the error message it goes away and nothing else happens. Because of this problem I have uninstalled and installed itunes at least 5 times.
    I have tried to read as many post in this forum as I can trying to find a solutions to this problem but to no avail. I have also gone to the vista forum and have read as many posts as I can about itunes problems that are there but to no avail. I have tried many fixes that have not work except one. And that was “to turn off the User Account Control.” When I turned off this control I was able to open itunes for the first times. Since then I have opened itunes many times and use it to load my ipod. But when I turn on User Account Control I have the same problem and I can’t open itune. I am open to suggestions on how to fix this problem and at this time I am not sure what is wrong. I have tried my things trying to fix this problem but for all I know I might have does something wrong. So at point I will try anything that you suggest.

  • I was doing an update and recieved an error message that Itunes did not reinstall properly and now I cannot open iTunes on my computer

    I was doing an update to my iTunes and it did not reinstall properly.  Now I cannot open iTunes at all on my laptop.  What are the fixes?

    You need to follow the instructions of tt2 in https://discussions.apple.com/thread/5822086

  • Just upgraded to 10.8.4 and now can't open canon raw files in photoshop cs5 with camera raw plug in 6.7

    i've just upgraded to os 10.8.4 and now i can't open canon raw files in photoshop cs5 with camera raw plug in 6.7 which worked perfectly prior to the upgrade....anyone else encountered this issue?

    Adobe's software is a mess in terms of the fact that it's sprayed all over the place and may not survive an OS upgrade.  Try reinstalling Photoshop CS5.

Maybe you are looking for

  • FaceTime quit unexpectedly while using the VideoProcessing plug-in.

    I am getting this error when I try to make or receive calls with FaceTime.  It doesn't matter if its already open or a new call.  I looked around the community and haven't found anything that helps.  I do not have the RazerAudio bug.  Does anyone kno

  • Why does closing all open windows (15) and leaving only one drop ram usage from 1.5 to 1.4Gb and not more.

    Why does closing all open windows (15) and leaving only one drop ram usage by only 100mb from 1.5 to 1.4Gb. What is in this 1.4 gb ? I don't care much about ram, It's just that cpu usage spike like crazy by the end. ''Edited to remove swearing - Tony

  • ABAP OO: How to implement a Destructor

    Hello. I implemented a ABAP-OO-Class, which supports (above others) the following methods: NEW -> Create new Object in DB DELETE -> Delete Object from DB In case the method DELETE is called i want to 'destroy' the object instance of this class. Curre

  • Printing Facing Pages

    I can create pdfs with facing pages and local printer can print them out fine.  What i want to be able to do is have my facing page exported in indiesign pages look like this on screen with spreads which is what I want. 1 2-3 4-5 6 But i would also l

  • Photoshop PSD files as Pictures

    I've been reading a lot of threads on importing still images into iMovie HD. This is what I gather: • porportions (4:3) can make importing these images easier/better • ken burns effect helps with compression • don't expect for them to look great on m