Problem e mailing with photos attached

I have written an e mail attached photos but am unable to send as my blackberry is using an old e mail address. How do I rectify this?

You need a BB data plan on the device and you need to set up your own email on it.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Similar Messages

Problem for Mail with PDF attachment

Hello all,
I have a problem regarding sending mail with a PDF attachment from SAP. The attachment contains Payslip of employee that is being generated from a Submit program of the respective HRFORM. I have used the Submit program within a JOB and the spool request generated. From the spool request i am extracting the pages using FM RSPO_GET_PAGES_SPOOLJOB.
Now to convert the spool job to PDF am using FM CONVERT_OTFSPOOLJOB_2_PDF. And after the job is being finished, am deleting both the JOB and SPOOL.
To change the output of the FM CONVERT_OTFSPOOLJOB_2_PDF, into attachment with line width of 255 am using FM SX_TABLE_LINE_WIDTH_CHANGE. Then after filling all the required parameters for FM SO_DOCUMENT_SEND_API1, am sending the mail with the attachment. I have kept the format as PDF.
But the problem here is, the attachment is going as .DAT file and not as .PDF file!!!
Please help to resolve this issue.
with regards,
Koushik.

Hello,
Instead of using SO* APIs to send mail you should use the BCS classes. Anyway there is a sample program BCS_EXAMPLE_8 which is very similar to your requirement
Cheers,
Suhas
PS: The sample program BCS_EXAMPLE_6 has got more to do with PDF forms as is your case

Cannot send mail with photo attachment

I took a photo with the iphone camera and tried to send to someone with email. The email does not appear in drafts and there is not an outbox. The iphone says sending message 1 but is not sending. How can I delete the email and how is this happening?

There could be an error in the mail app contacting your outgoing SMTP. You can force close the mail app, hold the power button down until you see the slider bar, then press the home button, until you return to the home screen. I've read where people are then putting the iPhone in airplane mode, entering the mail application and you should find the offending mail. You can delete it then.
Another option I've used when I've had a problem is to reboot the phone, Home and power button until you see the Apple logo. Once the iPhone reboots, enter the mail app and the mail usually will send. You shouldn't need to worry about the photo, since it is in the camera roll.

Problem with MacMail on MacBook Air - mail with 32MB attachment appearing in "recovered messages" folder every 12 seconds

Problem with MacMail on MacBook Air
3 days ago I failed to send a mail with a large (32MB) attachment - and it is no longer in my outbox, draft mails or sent file.
BUT a copy of this same mail now appears every about 15 seconds in my "recovered messages" folder
I noticed when I received a system error saying I had a disk almost full issue - there were over 580 copies of the mail with 32MB attachment in the "recovered messages file"
I deleted them all, and deleted the Trash
BUT the message still keeps re-appearing every 15 seconds or so. So I keep deleting them.
Since then I have not been able to receive mail (altho' I am able to send) and Mail is VERY slow
I am running MAC OS X 10.6.8
I am running Mail version 4.6 (1085)

Also here's the log before it happened. As you can see there is no activity from 9:48 to 10:00 am when the sound occurred.
23/02/2014 9:48:12.792 am ntpd[52]: FREQ state ignoring -0.145411 s
23/02/2014 9:48:15.258 am WindowServer[96]: _CGXHWCaptureWindowList: No capable active display found.
23/02/2014 9:48:20.000 am kernel[0]: AppleCamIn::systemWakeCall - messageType = 0xE0000280
23/02/2014 9:48:20.000 am kernel[0]: ARPT: 61.319378: AirPort_Brcm43xx::powerChange: System Sleep
23/02/2014 9:48:20.000 am kernel[0]: ARPT: 61.319390: wl0: powerChange: *** BONJOUR/MDNS OFFLOADS ARE NOT RUNNING.
23/02/2014 9:48:20.000 am kernel[0]: AppleCamIn::systemWakeCall - messageType = 0xE0000340
23/02/2014 10:00:04.000 am bootlog[0]: BOOT_TIME 1393167604 0
23/02/2014 10:00:06.000 am syslogd[17]: Configuration Notice:
ASL Module "com.apple.appstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
23/02/2014 10:00:06.000 am syslogd[17]: Configuration Notice:
ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".

Problem in excel format while sending mail with excel attachment.

Hi Gurus ,
I am sending a email with Excel attachment using FM SO_DOCUMENT_SEND_API1 or SO_NEW_DOCUMENT_ATT_SEND_API1.
I am able to send a mail with excel attachment with a piece of code which I got from SDN itself.
But the problem is when I am trying to open the attachment, A pop up comes which says that it is not in recognizable format. Would you like to open it?
and several other lines of caution.
When i choose to open it, i get the correct data in one excel sheet. Certain vertical lines of the excel sheet is missing. But no data is missing. 
I am attaching the code below. Can any one please tell me where is the problem in this code ?
Thanx in advance
types: begin of t_mara,
matnr type mara-matnr,
matkl type mara-matkl,
mtart type mara-mtart,
meins type mara-meins,
end of t_mara.
data: gt_mara type table of t_mara,
wa_mara like line of gt_mara,
it_packing_list type table of SOPCKLSTI1,
wa_packing_list like line of it_packing_list,
it_receivers type table of SOMLRECI1,
wa_receivers like line of it_receivers,
it_mailbody type table of SOLISTI1,
wa_mailbody like line of it_mailbody,
it_attachment type table of SOLISTI1,
wa_attachment like line of it_attachment.
data: la_doc type SODOCCHGI1.
constants:
con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
con_cret type c value cl_abap_char_utilities=>CR_LF.
* get material
select matnr matkl mtart meins
into table gt_mara
from mara
up to 25 rows.
* Populate the subject/generic message attributes
la_doc-obj_langu = sy-langu.
la_doc-obj_descr = 'Material Details' . "Mail Header
la_doc-sensitivty = 'F'.
la_doc-doc_size = 1.
* Add the recipients email address
CLEAR wa_receivers.
REFRESH it_receivers.
wa_receivers-receiver = 'PCSDEVL'.
wa_receivers-rec_type = 'U'.
wa_receivers-com_type = 'INT'.
wa_receivers-notif_del = 'X'.
wa_receivers-notif_ndel = 'X'.
APPEND wa_receivers to it_receivers.
* Mail Body
CLEAR wa_mailbody.
REFRESH it_mailbody.
wa_mailbody-line = 'Please find the attachment'.
APPEND wa_mailbody to it_mailbody.
* Mail attachmwnt
CLEAR wa_attachment.
REFRESH it_attachment.
CONCATENATE 'MATNR' 'MATKL' 'MTART' 'MEINS'
INTO wa_attachment SEPARATED BY con_tab.
CONCATENATE con_cret wa_attachment INTO wa_attachment.
APPEND wa_attachment to it_attachment.
LOOP AT gt_mara INTO wa_mara.
CONCATENATE wa_mara-matnr wa_mara-matkl
wa_mara-mtart wa_mara-meins
INTO wa_attachment SEPARATED BY con_tab.
CONCATENATE con_cret wa_attachment INTO wa_attachment.
APPEND wa_attachment to it_attachment.
ENDLOOP.
* Describe the body of the message
CLEAR wa_packing_list.
REFRESH it_packing_list.
wa_packing_list-transf_bin = space.
wa_packing_list-head_start = 1.
wa_packing_list-head_num = 0.
wa_packing_list-body_start = 1.
wa_packing_list-body_num = 1.
wa_packing_list-doc_type = 'RAW'.
APPEND wa_packing_list to it_packing_list.
* Create attachment notification
wa_packing_list-transf_bin = 'X'.
wa_packing_list-head_start = 1.
wa_packing_list-head_num = 1.
wa_packing_list-body_start = 1.
DESCRIBE TABLE it_attachment LINES wa_packing_list-body_num.
wa_packing_list-doc_type = 'XLS'. " To word attachment change this as 'DOC'
wa_packing_list-obj_descr = ' '.
concatenate wa_packing_list-doc_type 'file' into wa_packing_list-OBJ_DESCR
separated by space.
wa_packing_list-doc_size = wa_packing_list-body_num * 255.
APPEND wa_packing_list to it_packing_list.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = la_doc
PUT_IN_OUTBOX = 'X'
* SENDER_ADDRESS = SY-UNAME
* SENDER_ADDRESS_TYPE = 'B'
COMMIT_WORK = 'X'
* IMPORTING
* SENT_TO_ALL =
* NEW_OBJECT_ID =
* SENDER_ID =
tables
packing_list = it_packing_list
* OBJECT_HEADER =
CONTENTS_BIN = it_attachment
CONTENTS_TXT = it_mailbody
* CONTENTS_HEX =
* OBJECT_PARA =
* OBJECT_PARB =
receivers = it_receivers
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.

REPORT Zex5 LINE-SIZE 255 LINE-COUNT 255 .
class CL_ABAP_CHAR_UTILITIES definition load. "-->
TABLES : vbap.
SELECT-OPTIONS: s_vbeln FOR vbap-vbeln.
DATA : BEGIN OF itab OCCURS 1,
 vbeln LIKE vbap-vbeln,
 posnr LIKE vbap-posnr,
 matnr LIKE vbap-matnr,
 END OF itab.
parameters : p_email like somlreci1-receiver
DATA: tlines type i.
DATA: itmessage LIKE solisti1 OCCURS 1 WITH HEADER LINE. "Ok
DATA: itattach LIKE solisti1 OCCURS 2 WITH HEADER LINE. "Ok
DATA: itpacklist LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
DATA: itreclist LIKE somlreci1 OCCURS 5 WITH HEADER LINE.
data: itattachment like solisti1 OCCURS 2 WITH HEADER LINE.
start-of-selection.
SELECT vbeln posnr matnr
 FROM vbap
 INTO TABLE itab
 WHERE vbeln IN s_vbeln.
**Make the internal table data to be compatible in excel format .
PERFORM BUILD_XLS_FORMAT.
**Populate message of body text.
clear itmessage.
refresh itmessage.
itmessage = 'Please find attached Excel file'.
append itmessage.
PERFORM send_mail_as_xls_attachment tables itmessage
 itattach
 using p_email 'Excel Attachment' 'TXT' " 'XLS'
 using p_email 'TEXT Attachment' 'TXT' " 'XLS'
 'TestFileName'
 'SalesOrders' .
*& Form BUILD_XLS_FORMAT
 text
--> p1 text
<-- p2 text
form BUILD_XLS_FORMAT.
previosuly we were using for unicode ..now replaced
**Declare constants for the spacing .
*Constants : con1 type x value '0D',
 con2 type x value '09'.
Constants : con1 type c
 value CL_ABAP_CHAR_UTILITIES=>CR_LF,
 con2 type c
 value CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
**For the Header descriptions.
Concatenate 'SalesORdNo'
 'Item'
 'Materialno' into itattach separated by con2.
Concatenate con1 itattach into itattach.
Append itattach.
**Now align the items in the itab as above .
Loop at Itab.
 concatenate itab-vbeln
 itab-posnr
 itab-matnr into itattach separated by con2.
 concatenate con1 itattach into itattach .
 Append itattach.
endloop.
endform. " BUILD_XLS_FORMAT
*& Form send_mail_as_xls_attachment
 text
 -->P_ITMESSAGE text
 -->P_ITATTACH text
 -->P_P_EMAIL text
 -->P_0116 text
 -->P_0117 text
 -->P_0118 text
 -->P_0119 text
form send_mail_as_xls_attachment tables p_itmessage
 p_itattach
 using p_email
 p_mtitle
 p_format
 p_filename
 p_attdescription.
Data : xdocdata like sodocchgi1,
 xcnt type i.
*Fill the document data.
xdocdata-doc_size = 1.
*Populate the subject/generic message attributes.
xdocdata-obj_name = 'SAPRPT'.
xdocdata-obj_langu = sy-langu.
xdocdata-obj_descr = p_mtitle.
*Fill the document data and fetch size of attachment.
clear xdocdata.
read table itattach index xcnt.
xdocdata-doc_size = ( xcnt - 1 ) * 255 + strlen( itattach ).
xdocdata-doc_size = ( xcnt - 1 ) * 255.
xdocdata-obj_name = 'SAPRPT'.
xdocdata-obj_langu = sy-langu.
xdocdata-obj_descr = p_mtitle.
clear itattachment. refresh itattachment.
 itattachment[] = p_itattach[].
*Describe the body of the message.
clear itpacklist. refresh itpacklist.
itpacklist-transf_bin = 'X'.
itpacklist-head_start = '1'.
itpacklist-head_num = '0'.
itpacklist-body_start = '1'.
describe table itattachment lines itpacklist-body_num .
itpacklist-doc_type = 'TXT'.
itpacklist-doc_type = 'XLS'.
append itpacklist.
*Create attachment notification.
itpacklist-transf_bin = 'X'.
itpacklist-head_start = '1'.
itpacklist-head_num = '1'.
itpacklist-body_start = '1'.
describe table itattachment lines itpacklist-body_num .
itpacklist-doc_type = p_format.
itpacklist-obj_name = p_filename.
itpacklist-obj_descr = p_attdescription.
itpacklist-doc_size = itpacklist-body_num * 255 .
append itpacklist.
*FIll the receivers list.
Clear itreclist. refresh itreclist.
itreclist-receiver = p_email.
itreclist-rec_type = 'U'.
itreclist-com_type = 'INT'.
itreclist-notif_del = 'X'.
itreclist-notif_ndel = 'X'.
*itreclist-notif_read = 'X'.
append itreclist.
*CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = xdocdata
PUT_IN_OUTBOX = 'X'
commit_work = 'X'
SENDER_ADDRESS = SY-UNAME
tables
 packing_list = itpacklist
 CONTENTS_BIN = itattachment
 CONTENTS_TXT = itmessage
 receivers = itreclist
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8
*IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
 EXPORTING
 document_data = xdocdata
 PUT_IN_OUTBOX = 'X'
 TABLES
 packing_list = itpacklist
 CONTENTS_BIN = itattachment
 CONTENTS_TXT = itmessage
 receivers = itreclist
 EXCEPTIONS
 TOO_MANY_RECEIVERS = 1
 DOCUMENT_NOT_SENT = 2
 DOCUMENT_TYPE_NOT_EXIST = 3
 OPERATION_NO_AUTHORIZATION = 4
 PARAMETER_ERROR = 5
 X_ERROR = 6
 ENQUEUE_ERROR = 7
 OTHERS = 8.
IF sy-subrc <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " send_mail_as_xls_attachment
Just execute the above code and let me know.
What is the sap version u r using .
Vijay

Sending mail with multiple attachment

hi.
i want to send mail with multiple attachment.
i m succeed in sending multiple attachment but the second pdf is not open.
its given error like "This file is damaged and could not be open.
pls check my code. and
give the solution....
point should be assured...........
hope all u r understand my problem..
& tell me where is i m missing something.
REPORT YSDPASALE1_MAIL LINE-SIZE 110.
data : year_month(6) type c.
data : from_date like sy-datum,to_date like sy-datum.
INITIALIZATION.
year_month = sy-datum+0(6).
CONCATENATE year_month '01' into from_date.
to_date = sy-datum.
ranges : temp for mkpf-budat.
temp-low = from_date.
temp-high = to_date.
append temp to temp.
DATA: P_JOBCNT LIKE TBTCJOB-JOBCOUNT,
 jobname like TBTCJOB-JOBNAME,
 L_RELEASE(1) TYPE c.
CONSTANTS : l_c_device(4) VALUE 'LOCL'.
DATA : t type i value 0.
DATA : p_email1 like somlreci1-receiver,
 p_sender LIKE somlreci1-receiver.
Data Declaration
DATA: gd_recsize TYPE i,gd_recsize1 TYPE i.
Spool IDs
TYPES: BEGIN OF t_tbtcp.
 INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
 wa_tbtcp TYPE t_tbtcp.
Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
 gd_eventparm LIKE tbtcm-eventparm,
 gd_external_program_active LIKE tbtcm-xpgactive,
 gd_jobcount LIKE tbtcm-jobcount,
 gd_jobname LIKE tbtcm-jobname,
 gd_stepcount LIKE tbtcm-stepcount,
 gd_error TYPE sy-subrc,
 gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
 it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
 it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
 it_mess_att1 LIKE solisti1 OCCURS 0 WITH HEADER LINE,
 it_mess_att2 LIKE solisti1 OCCURS 0 WITH HEADER LINE,
 gd_sender_type LIKE soextreci1-adr_typ,
 gd_attachment_desc TYPE so_obj_nam,
 gd_attachment_desc1 TYPE so_obj_nam,
 gd_attachment_name TYPE so_obj_des,
 gd_mtitle LIKE sodocchgi1-obj_descr.
Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
 gd_destination LIKE rlgrap-filename,
 gd_bytecount LIKE tst01-dsize,
 gd_buffer TYPE string.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
 c_no(1) TYPE c VALUE ' ',
 c_device(4) TYPE c VALUE 'LOCL'.
Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
 INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
DATA: BEGIN OF mailstr OCCURS 0,
 p_email like somlreci1-receiver,
 END OF mailstr.
DATA: mailtab like STANDARD TABLE OF mailstr WITH HEADER LINE.
DATA: ypp18tab like STANDARD TABLE OF mailstr WITH HEADER LINE,
 ymis008tab like STANDARD TABLE OF mailstr WITH HEADER LINE,
 ysd15tab like STANDARD TABLE OF mailstr WITH HEADER LINE,
 ymis10tab like STANDARD TABLE OF mailstr WITH HEADER LINE.
SUBMIT YSDPASALE1 with bdt in temp
 to sap-spool
 with line-size = '255'
 with KEEP_IN_SPOOL = 'X'
 with IMMEDIATELY = ' '
 WITHOUT SPOOL DYNPRO
 AND RETURN
 NEW-PAGE PRINT ON
 DESTINATION l_c_device
 IMMEDIATELY ' '
 KEEP IN SPOOL 'X'
 NEW LIST IDENTIFICATION 'X'
 NO DIALOG.
 new-page print off.
IF sy-batch EQ 'X'.
 PERFORM get_job_details.
 PERFORM obtain_spool_id.
 PERFORM convert_spool_to_pdf.
 select yemail as p_email into CORRESPONDING FIELDS OF TABLE ymis008tab
 from ymail
 where ytcode = 'YMIS008'.
ELSE.
 SKIP.
 WRITE:/ 'Program must be executed in background in-order for spool & mail sending',
 'request to be created.'.
ENDIF.
wait up to 3 seconds.
submit YSD_MONTHLY_SALES
 USING SELECTION-SET 'MAIL'
 to sap-spool
 with KEEP_IN_SPOOL = 'X'
 with IMMEDIATELY = ' ' "SPACE
 WITHOUT SPOOL DYNPRO
 AND RETURN
 NEW-PAGE PRINT ON
 DESTINATION l_c_device
 IMMEDIATELY ' '
 KEEP IN SPOOL 'X'
 NEW LIST IDENTIFICATION 'X'
 NO DIALOG.
 new-page print off.
 IF sy-batch EQ 'X'.
 gd_attachment_desc1 = 'YMIS10'.
 gd_mtitle = 'Monthly Sales Report'.
 PERFORM get_job_details.
 PERFORM obtain_spool_id.
 PERFORM convert_spool_to_pdf1.
 loop at it_mess_att.
 move it_mess_att1 to it_mess_att.
 APPEND it_mess_att.
 endloop.
 APPEND LINES OF it_mess_att1 to it_mess_att.
 free it_mess_att1.
 it_mess_att[] = it_mess_att1[].
 insert LINES OF it_mess_att1 into it_mess_att.
 APPEND LINES OF it_mess_att2 to it_mess_att .
 insert LINES OF it_mess_att1 into it_mess_att.
 insert LINES OF it_mess_att2 into it_mess_att.
 loop at ymis008tab into mailstr.
 p_email1 = mailstr-p_email.
 p_email1 = '[email protected]'.
 PERFORM process_email.
 endloop.
 clear mailstr.
 wait up to 5 seconds.
 SUBMIT rsconn01 WITH mode = 'INT'
 WITH output = 'X'
 AND RETURN.
ELSE.
 SKIP.
ENDIF.
 FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
 INTO TABLE it_tbtcp
 WHERE jobname = gd_jobname
 AND jobcount = gd_jobcount
 AND stepcount = gd_stepcount
 AND listident <> '0000000000'
 ORDER BY jobname
 jobcount
 stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
 message s004(zdd) with gd_spool_nr.
 gd_spool_nr = wa_tbtcp-listident.
 MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
 MESSAGE s005(zdd).
ENDIF.
ENDFORM.
 FORM get_job_details *
FORM get_job_details.
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
 IMPORTING
 eventid = gd_eventid
 eventparm = gd_eventparm
 external_program_active = gd_external_program_active
 jobcount = gd_jobcount
 jobname = gd_jobname
 stepcount = gd_stepcount
 EXCEPTIONS
 no_runtime_info = 1
 OTHERS = 2.
ENDFORM.
 FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
 EXPORTING
 src_spoolid = gd_spool_nr
 no_dialog = c_no
 dst_device = c_device
 IMPORTING
 pdf_bytecount = gd_bytecount
 TABLES
 pdf = it_pdf_output
 EXCEPTIONS
 err_no_abap_spooljob = 1
 err_no_spooljob = 2
 err_no_permission = 3
 err_conv_not_possible = 4
 err_bad_destdevice = 5
 user_cancelled = 6
 err_spoolerror = 7
 err_temseerror = 8
 err_btcjob_open_failed = 9
 err_btcjob_submit_failed = 10
 err_btcjob_close_failed = 11
 OTHERS = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
 TRANSLATE it_pdf_output USING ' ~'.
 CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
 it_mess_att = gd_buffer.
 APPEND it_mess_att.
 SHIFT gd_buffer LEFT BY 255 PLACES.
 IF gd_buffer IS INITIAL.
 EXIT.
 ENDIF.
ENDDO.
ENDFORM.
FORM convert_spool_to_pdf1.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
 EXPORTING
 src_spoolid = gd_spool_nr
 no_dialog = c_no
 dst_device = c_device
 IMPORTING
 pdf_bytecount = gd_bytecount
 TABLES
 pdf = it_pdf_output
 EXCEPTIONS
 err_no_abap_spooljob = 1
 err_no_spooljob = 2
 err_no_permission = 3
 err_conv_not_possible = 4
 err_bad_destdevice = 5
 user_cancelled = 6
 err_spoolerror = 7
 err_temseerror = 8
 err_btcjob_open_failed = 9
 err_btcjob_submit_failed = 10
 err_btcjob_close_failed = 11
 OTHERS = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
 TRANSLATE it_pdf_output USING ' ~'.
 CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
 it_mess_att1 = gd_buffer.
 APPEND it_mess_att1.
 SHIFT gd_buffer LEFT BY 255 PLACES.
 IF gd_buffer IS INITIAL.
 EXIT.
 ENDIF.
ENDDO.
ENDFORM.
 FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
DESCRIBE TABLE it_mess_att1 LINES gd_recsize1.
CHECK gd_recsize > 0 or gd_recsize1 > 0.
PERFORM send_email." USING p_email1.
perform send_email using p_email2.
ENDFORM.
 FORM send_email *
--> p_email *
FORM send_email." USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject = 'Subject'.
gd_attachment_desc = gd_attachment_desc1 .
gd_attachment_desc = 'YPP18 - Daily Highlights'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Dear Sir,'.
APPEND it_mess_bod.
it_mess_bod = ' '.
APPEND it_mess_bod.
it_mess_bod = ' '.
APPEND it_mess_bod.
it_mess_bod = 'kindly find the attached document'.
APPEND it_mess_bod.
it_mess_bod = ' '.
APPEND it_mess_bod.
it_mess_bod = 'Do not reply on this mail, It is generated from SAP'.
APPEND it_mess_bod.
it_mess_bod = ' '.
APPEND it_mess_bod.
it_mess_bod = ' '.
APPEND it_mess_bod.
it_mess_bod = 'Regards,'.
APPEND it_mess_bod.
it_mess_bod = 'Arpit Shah'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
 gd_sender_type = space.
ELSE.
 gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
 tables it_mess_bod
 it_mess_att
 it_mess_att1
 using "p_email
 gd_mtitle
 'Testing mail generated from SAP'
 'Daily Highlights Abstract Report - YPP18'
 'PDF'
 gd_attachment_name
 gd_attachment_desc
 p_sender
 gd_sender_type
 changing gd_error
 gd_reciever.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
 Send email
FORM send_file_as_email_attachment tables it_message
 it_attach
 it_attach1
 using "p_email
 p_mtitle
 p_format
 p_filename
 p_attdescription
 p_sender_address
 p_sender_addres_type
 changing p_error
 p_reciever.
DATA: ld_error TYPE sy-subrc,
 ld_reciever TYPE sy-subrc,
 ld_mtitle LIKE sodocchgi1-obj_descr,
 ld_email LIKE somlreci1-receiver,
 ld_format TYPE so_obj_tp ,
 ld_attdescription TYPE so_obj_nam ,
 ld_attfilename TYPE so_obj_des ,
 ld_sender_address LIKE soextreci1-receiver,
 ld_sender_address_type LIKE soextreci1-adr_typ,
 ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
 t_contents like solisti1 occurs 0 with header line,
 t_receivers like somlreci1 occurs 0 with header line,
 t_attachment like solisti1 occurs 0 with header line,
 t_object_header like solisti1 occurs 0 with header line,
 w_cnt type i,
 w_sent_all(1) type c,
 w_doc_data like sodocchgi1,w_doc_data1 like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
 ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data1-doc_size =
 ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
For 2nd Attachments
* Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach1 INDEX w_cnt.
w_doc_data-doc_size = w_doc_data1-doc_size +
 ( w_cnt - 1 ) * 255 + STRLEN( it_attach1 ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
APPEND LINES OF it_attach1 to t_attachment.
t_attachment[] = it_attach1[].
APPEND LINES OF it_attach1 to t_attachment.
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
DESCRIBE TABLE it_mess_att LINES t_packing_list-body_num.
DESCRIBE TABLE it_attach LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = 'YMIS008'."ld_attdescription.
t_packing_list-obj_name = 'YMIS008'."ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
clear t_packing_list.
for 2 attachments
data : a type i,b type i.
 a = t_packing_list-body_num.
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = a + 1. "1
DESCRIBE TABLE it_mess_att1 LINES t_packing_list-body_num.
DESCRIBE TABLE it_attach1 LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = 'YMIS10'."ld_attdescription.
t_packing_list-obj_name = 'YMIS10'."ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
a = t_packing_list-body_num.
clear t_packing_list.
* Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = a + 1.
t_packing_list-body_num = t_packing_list-body_num + 1.
DESCRIBE TABLE it_mess_att1 LINES t_packing_list-body_num.
t_packing_list-body_num = a + t_packing_list-body_num .
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = 'YMIS10'."ld_attdescription.
t_packing_list-obj_name = 'YMIS10'."ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
loop at ymis008tab into mailstr.
t_receivers-receiver = mailstr-p_email. "ld_email.
t_receivers-receiver = p_email1.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'. "X "Read Acknoledgement
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
endloop.
 CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
 EXPORTING
 document_data = w_doc_data
 put_in_outbox = 'X'
 sender_address = ld_sender_address
 sender_address_type = ld_sender_address_type
 commit_work = 'X'
 IMPORTING
 sent_to_all = w_sent_all
 TABLES
 packing_list = t_packing_list
 contents_bin = t_attachment
 contents_txt = it_message
 receivers = t_receivers
 EXCEPTIONS
 too_many_receivers = 1
 document_not_sent = 2
 document_type_not_exist = 3
 operation_no_authorization = 4
 parameter_error = 5
 x_error = 6
 enqueue_error = 7
 OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
 ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
Rgds.
Arpit

Hi Arpit,
Take a look at the documentation of FM 'SO_DOCUMENT_SEND_API1' for parameter PACKING_LIST. I think you should set t_packing_list-head_num to a different value than 0 for the second attachment.
Regards,
John.

Send Mail with Multiple Attachment

How to send mail with multiple attachment. The documents are in a table column BLOB. Read and attach in to mail directly.
We dont want save the documents into hard disk and attach to mail. Please Help
If you have java procedure or Pl/Sql Procedure. I think pl/sql cant. So please mail me code to [email protected] mail id. Thank you.
Thanks in advance
Selvam

Hi all
Thanks for your reply, already tried this methods, Its not working for my requirements. Because my attachment is can be any type like pdf,doc,txt,xls,jpg,.
And also the Utl_mail is very slow. Its using RAW type.
I can use the javamail package to solve this problem, this javamail package needs to download into server from there you can attach thus documents into mail. But I want fetch the documents and ate the same time I want attach to a mail. Like yahoo attach or msn attachment.
Thank you,
Selvam

Sending UTL_SMTP mail with Multiple attachment

Hi,
My Environment ----> Oracle Database 11g r1 on Windows 2003 Server (64Bit).
The below script i used for sending mail with single attachment now i am trying to send mail with multiple attachment please tell me how to achieve this
DECLARE
/*LOB operation related varriables */
v_src_loc BFILE := BFILENAME('DATA_PUMP_DIR', 'EXPORT.LOG');
l_buffer RAW(54);
l_amount BINARY_INTEGER := 54;
l_pos INTEGER := 1;
l_blob BLOB := EMPTY_BLOB;
l_blob_len INTEGER;
v_amount INTEGER;
/*UTL_SMTP related varriavles. */
v_connection_handle UTL_SMTP.CONNECTION;
v_from_email_address VARCHAR2(30) := '[email protected]';
v_to_email_address VARCHAR2(30) := '[email protected]';
v_smtp_host VARCHAR2(30) := 'MAIL.EXPORT.COM'; --My mail server, replace it with yours.
v_subject VARCHAR2(30) := 'MULTIPLE Attachment Test';
l_message VARCHAR2(200) := 'TEST Mail for Multiple Attachment';
/* This send_header procedure is written in the documentation */
PROCEDURE send_header(pi_name IN VARCHAR2, pi_header IN VARCHAR2) AS
BEGIN
UTL_SMTP.WRITE_DATA(v_connection_handle,
pi_name || ': ' || pi_header || UTL_TCP.CRLF);
END;
BEGIN
/*Preparing the LOB from file for attachment. */
DBMS_LOB.OPEN(v_src_loc, DBMS_LOB.LOB_READONLY); --Read the file
DBMS_LOB.CREATETEMPORARY(l_blob, TRUE); --Create temporary LOB to store the file.
v_amount := DBMS_LOB.GETLENGTH(v_src_loc); --Amount to store.
DBMS_LOB.LOADFROMFILE(l_blob, v_src_loc, v_amount); -- Loading from file into temporary LOB
l_blob_len := DBMS_LOB.getlength(l_blob);
/*UTL_SMTP related coding. */
v_connection_handle := UTL_SMTP.OPEN_CONNECTION(host => v_smtp_host);
UTL_SMTP.HELO(v_connection_handle, v_smtp_host);
UTL_SMTP.MAIL(v_connection_handle, v_from_email_address);
UTL_SMTP.RCPT(v_connection_handle, v_to_email_address);
UTL_SMTP.OPEN_DATA(v_connection_handle);
send_header('From', '"Sender"');
send_header('To', '"Recipient"');
send_header('Subject', v_subject);
--MIME header.
UTL_SMTP.WRITE_DATA(v_connection_handle,
'MIME-Version: 1.0' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Type: multipart/mixed; ' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
' boundary= "' || 'SAUBHIK.SECBOUND' || '"' ||
UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
-- Mail Body
UTL_SMTP.WRITE_DATA(v_connection_handle,
'--' || 'SAUBHIK.SECBOUND' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Type: text/plain;' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
' charset=US-ASCII' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle, l_message || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
-- Mail Attachment
UTL_SMTP.WRITE_DATA(v_connection_handle,
'--' || 'SAUBHIK.SECBOUND' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Type: application/octet-stream' ||
UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Disposition: attachment; ' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
' filename="' || 'export.log' || '"' || --My filename
UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Transfer-Encoding: base64' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
/* Writing the BLOL in chunks */
WHILE l_pos < l_blob_len LOOP
DBMS_LOB.READ(l_blob, l_amount, l_pos, l_buffer);
UTL_SMTP.write_raw_data(v_connection_handle,
UTL_ENCODE.BASE64_ENCODE(l_buffer));
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
l_buffer := NULL;
l_pos := l_pos + l_amount;
END LOOP;
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
-- Close Email
UTL_SMTP.WRITE_DATA(v_connection_handle,
'--' || 'SAUBHIK.SECBOUND' || '--' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
UTL_TCP.CRLF || '.' || UTL_TCP.CRLF);
UTL_SMTP.CLOSE_DATA(v_connection_handle);
UTL_SMTP.QUIT(v_connection_handle);
DBMS_LOB.FREETEMPORARY(l_blob);
DBMS_LOB.FILECLOSE(v_src_loc);
EXCEPTION
WHEN OTHERS THEN
UTL_SMTP.QUIT(v_connection_handle);
DBMS_LOB.FREETEMPORARY(l_blob);
DBMS_LOB.FILECLOSE(v_src_loc);
RAISE;
END;
Thank you
Shan

Hi Saubhik
Thanks for your reply, below script i used to send mail with multiple attachments, plsql code is executing without any error messages and i am also able to receive mail with the multiple attachment.
i used your code which u posted in OTN then i changed little bit as per my need, output is ok.but the problem is if i want to add one more file then i have to add more varaiables in the code. i want to make the code which i can add more attachments without adding more varaiables i don't know the way to do this. can u please give me some hints.
Thanks for your help
Shan
Script Used:
DECLARE
/*LOB operation related varriables01 */
v_src_loc BFILE := BFILENAME('DATA_PUMP_DIR', 'EXPORT.LOG');
l_buffer RAW(54);
l_amount BINARY_INTEGER := 54;
l_pos INTEGER := 1;
l_blob BLOB := EMPTY_BLOB;
l_blob_len INTEGER;
v_amount INTEGER;
/*LOB operation related varriables02 */
v_src_loc2 BFILE := BFILENAME('DATA_PUMP_DIR', 'EXPORT1.LOG');
l_buffer2 RAW(54);
l_amount2 BINARY_INTEGER := 54;
l_pos2 INTEGER := 1;
l_blob2 BLOB := EMPTY_BLOB;
l_blob_len2 INTEGER;
v_amount2 INTEGER;
/*UTL_SMTP related varriavles. */
v_connection_handle UTL_SMTP.CONNECTION;
v_from_email_address VARCHAR2(30) := '[email protected]';
v_to_email_address VARCHAR2(30) := '[email protected]';
v_smtp_host VARCHAR2(30) := 'MAIL.EXPORT.COM'; --My mail server, replace it with yours.
v_subject VARCHAR2(30) := 'MULTIPLE Attachment Test';
l_message VARCHAR2(200) := 'TEST Mail for Multiple Attachment';
/* This send_header procedure is written in the documentation */
PROCEDURE send_header(pi_name IN VARCHAR2, pi_header IN VARCHAR2) AS
BEGIN
UTL_SMTP.WRITE_DATA(v_connection_handle,
pi_name || ': ' || pi_header || UTL_TCP.CRLF);
END;
BEGIN
/*Preparing the LOB from file for attachment01. */
DBMS_LOB.OPEN(v_src_loc, DBMS_LOB.LOB_READONLY); --Read the file
DBMS_LOB.CREATETEMPORARY(l_blob, TRUE); --Create temporary LOB to store the file.
v_amount := DBMS_LOB.GETLENGTH(v_src_loc); --Amount to store.
DBMS_LOB.LOADFROMFILE(l_blob, v_src_loc, v_amount); -- Loading from file into temporary LOB
l_blob_len := DBMS_LOB.getlength(l_blob);
/*Preparing the LOB from file for attachment02. */
DBMS_LOB.OPEN(v_src_loc2, DBMS_LOB.LOB_READONLY); --Read the file
DBMS_LOB.CREATETEMPORARY(l_blob2, TRUE); --Create temporary LOB to store the file.
v_amount2 := DBMS_LOB.GETLENGTH(v_src_loc2); --Amount to store.
DBMS_LOB.LOADFROMFILE(l_blob2, v_src_loc2, v_amount2); -- Loading from file into temporary LOB
l_blob_len2 := DBMS_LOB.getlength(l_blob2);
/*UTL_SMTP related coding. */
v_connection_handle := UTL_SMTP.OPEN_CONNECTION(host => v_smtp_host);
UTL_SMTP.HELO(v_connection_handle, v_smtp_host);
UTL_SMTP.MAIL(v_connection_handle, v_from_email_address);
UTL_SMTP.RCPT(v_connection_handle, v_to_email_address);
UTL_SMTP.OPEN_DATA(v_connection_handle);
send_header('From', '"Sender"');
send_header('To', '"Recipient"');
send_header('Subject', v_subject);
--MIME header.
UTL_SMTP.WRITE_DATA(v_connection_handle,
'MIME-Version: 1.0' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Type: multipart/mixed; ' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
' boundary= "' || 'SAUBHIK.SECBOUND' || '"' ||
UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
-- Mail Body
UTL_SMTP.WRITE_DATA(v_connection_handle,
'--' || 'SAUBHIK.SECBOUND' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Type: text/plain;' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
' charset=US-ASCII' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle, l_message || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
-- Mail Attachment01
UTL_SMTP.WRITE_DATA(v_connection_handle,
'--' || 'SAUBHIK.SECBOUND' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Type: application/octet-stream' ||
UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Disposition: attachment; ' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
' filename="' || 'export.log' || '"' || --My filename
UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Transfer-Encoding: base64' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
/* Writing the BLOL in chunks */
WHILE l_pos < l_blob_len LOOP
DBMS_LOB.READ(l_blob, l_amount, l_pos, l_buffer);
UTL_SMTP.write_raw_data(v_connection_handle,
UTL_ENCODE.BASE64_ENCODE(l_buffer));
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
l_buffer := NULL;
l_pos := l_pos + l_amount;
END LOOP;
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
-- Mail Attachment02
UTL_SMTP.WRITE_DATA(v_connection_handle,
'--' || 'SAUBHIK.SECBOUND' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Type: application/octet-stream' ||
UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Disposition: attachment; ' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
' filename="' || 'export1.log' || '"' || --My filename
UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Transfer-Encoding: base64' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
/* Writing the BLOL in chunks */
WHILE l_pos2 < l_blob_len2 LOOP
DBMS_LOB.READ(l_blob2, l_amount2, l_pos2, l_buffer2);
UTL_SMTP.write_raw_data(v_connection_handle,
UTL_ENCODE.BASE64_ENCODE(l_buffer2));
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
l_buffer2 := NULL;
l_pos2 := l_pos2 + l_amount2;
END LOOP;
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
-- Close Email
UTL_SMTP.WRITE_DATA(v_connection_handle,
'--' || 'SAUBHIK.SECBOUND' || '--' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
UTL_TCP.CRLF || '.' || UTL_TCP.CRLF);
UTL_SMTP.CLOSE_DATA(v_connection_handle);
UTL_SMTP.QUIT(v_connection_handle);
DBMS_LOB.FREETEMPORARY(l_blob);
DBMS_LOB.FILECLOSE(v_src_loc);
DBMS_LOB.FREETEMPORARY(l_blob2);
DBMS_LOB.FILECLOSE(v_src_loc2);
EXCEPTION
WHEN OTHERS THEN
UTL_SMTP.QUIT(v_connection_handle);
DBMS_LOB.FREETEMPORARY(l_blob);
DBMS_LOB.FILECLOSE(v_src_loc);
DBMS_LOB.FREETEMPORARY(l_blob2);
DBMS_LOB.FILECLOSE(v_src_loc2);
RAISE;
END;
PL/SQL procedure successfully completed.
Edited by: SHAN2009 on May 11, 2011 1:05 PM

Adobe Photoshop Elements 13 won't launch email with photos attached, why?

Adobe Photoshop Elements 13 won't launch email with photos attached, why?

Gordon,
Are you trying to use email functionality in Elements Organizer and then witnessing this problem.
If this is the case, I would recommend you to go through this article once and see i it helps:
Elements Organizer Help | Share files and slideshows by email
Thanks,
Anwesha

HT1386 All of a sudden when I forward a mail with an attachment the attachment does not appear in the message can you tell me why and how to correct it.

All of a sudden I can not forward mail with an attachment. Anybody have any suggestions.

When you tap on the arrow in the upper right corner and select - Forward - doesn't another window popup that says Include/Don't Include? That is in reference to the attachment. Select Include from that window.
Sorry, didn't realize that my photo editing "skills" would produce the giant size screenshot!
Message was edited by: Demo

When I try to send an email with photo attachment to a contact a screen appears stating "the sender name is not recognized by the server " what do I need to change so this will not happen in the future. I am a novice!!!!!

When I try to send an email with photo attachment on my iPad a screen appears which states " the sender is not recognized by the server" . What do I have to change so I can always send emails fr om my iPad with or without attachments. I am a novice!!!!!!

If you purchased about 2 years ago new I am sure it is a Intel iMac. To find out what type of iMac you have just click on the Apple menu item in the finder and select about this Mac. I would check the ISP mail site and get the correct outgoing mail server info.

Hello, i opened an email with photo attachment, it is still trying to download and has blocked my ipad2. I foolishly turned it off and now can`t turn it on as it just shows the spinning circle icon 0 help- novice user here

Help< I opened an email with photo attachements and it is taking all day to download, I cant delete it, it just stops mail from working. Everything else was fine till i thought turning off the ipad and trying again would work. It didn`t, I cant turn it on at all - itjust shows the spinning wheel (loading?) icon and nothing else. Being a novice and ive only had this for a couple of weeks i need help!

Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Problem sending mail with attachments???

Hi Everybody,
I have got a problem sending mail with attachments...
I am able to send a plain mail ... but when i am trying to send mail along with an attachment ... its not being sent....
its not showing any error it is simply hanging...
what should i do?
If u know any solns please do suggest me....
Thanks in advance

activation.jar is already there...
initially i wrote a swing program as a front end and it was working abs fine... in my sense it was properly sending mails along with the attachments...
when i changed the front-end to JSP handled by Servlets i am getting a problem...
and even the swing program stopped working ...
now swing program is getting compiled but it is hanging at run time showing an exception "Exception occured during event dispatching"
i dont understand what probably may be the problem...
if u can trace out, please give me any suggestions
Thanks in advance and regards

Need help forwarding an e mail with photos and graphics intact in the body of the email

When I forward an e mail with photos or graphics the forwarded e mail is delivered with text only. How can I correct this?

Firefox doesn't do email, it's a web browser.
If you are using Firefox to access your mail, you are using "web-mail". You need to seek support from your service provider or a forum for that service.
If your problem is with Mozilla Thunderbird, see this forum for support.
[http://www.mozillamessaging.com/en-US/support/] 
or this one 
[http://forums.mozillazine.org/viewforum.php?f=39]

Error while sending a mail with pdf attachment

Hai
I am sending mail with an attachment of PDF document. While sending I am getting
javax.activation.UnsupportedDataTypeException: application/pdf
This is my code
public static void setByteArrayAsAttachment(Message msg, byte[] attach)
throws MessagingException {
MimeBodyPart p1 = new MimeBodyPart();
ByteArrayDataSource byteStr = new ByteArrayDataSource(attach,"application/pdf");
p1.setContent(byteStr,"application/pdf");
Multipart mp = new MimeMultipart();
mp.addBodyPart(p1);
msg.setContent(mp);
Can one one help me on this...
Thanks
Jithesh PM

Change
p1.setContent(byteStr,"application/pdf");
to
p1.setDataHandler(new DataHandler(byteStr));

Problem e mailing with photos attached

Similar Messages

Maybe you are looking for