PROBLEM EDITING AUDIO BETWEEN PREMIERE CS4 AND AU OR SB

I have a problem editing my audio files in audition or soundboth, when I return to premiere after have edited the file in AU or SB, I can't see the wave in premiere but I can hear the audio.
I have to rebote premiere to see the wave.
What could be happening?
could you help me, please?
Excuse me for my english, I speak spanish.

What are your exact steps to edit in SB or AU? Do you first Rt-click on the Audio Clip and choose Edit in SoundBooth (or Audition)? Do you Render and Replace (basically what happens with the previous method), and then Open that resulting file in SB, or AU?
From SB, or AU, how do you Save your file - exact steps please?
Good luck,
Hunt

Similar Messages

Compatible HDV formats between Premiere CS4 and AE CS4?

Sorry if this has been covered before.
I'm new to CS4 Production Premium, (but not Premiere in general), and I'm having trouble finding a compatible format that I can use between AE CS4 and Premiere CS4. I'm using 1080i HDV captured from a Canon XHA1.
Premiere CS4 reads it just fine, but I cant get it into AE.
Thanks in advance for any comments.
Andy

once I understood it was only a one way street per use.
It can be sort of two-way.
http://help.adobe.com/en_US/PremierePro/4.0/WS4674B366-D7E4-4778-94BE-B663666435F8.html

My host name changes every few days, since Xmas adding a macbook its changed 6 times. Do I need to stop this? Does it cause problems with sharing between the iMac and macbook?

my host name changes every few days, since Xmas adding a macbook its changed 6 times. Do I need to stop this? Does it cause problems with sharing between the iMac and macbook?

There are several possible causes for this problem.
1. Two (or more) computers on the local network have the same Bonjour name, such as "X's-MacBook-Pro.local".
2. You have two simultaneous connections to the same local network: probably Ethernet and Wi-Fi. If applicable, disconnect the Ethernet cable or turn off Wi-Fi.
3. A Mac wakes from sleep due to network traffic. This is due to a bug in OS X that may only affect some models.
4. A device that gets its network address from the router wakes from sleep, and the address it was using before has been assigned to another device.
5. A third-party wireless router has incompatible settings or firmware. In that case, refer to the manufacturer or ISP for support. Restarting the router may help, temporarily.
6. See also this support article.
Rename the computer in the Sharing preference pane.

Problem exchanging values between a Servlet and Thread???

Hi Everybody,
I have got a problem exchanging values between a Servlet and a Thread...
The actual thing will go like this
I take a request from JSP which is served by a servlet..
A thread is invoked in the servlets into which the parameter values taken from JSP page is sent...
In between the thread needs to be suspended for a moment, relieve the control back to the servlet and then come back with the new values modified in the servlet...
How is this achieved?
Please give ur suggestions regarding this...
Thanks in advance

I really have no clue how you can use URLConnection to do that!
Could you please explain in the following scenario how it can help me as an alternative solution to the following:
Non-Servlet A continously running & saving to some prop regularly
--> servlet B reads prop file regularly --> display continously on a jsp file
I wish I could do a servlet A --> servlet B-- > display jsp scenario but I do not know how to have servlet A continously running while keep the servlet B interacting with the jsp.

I have problems in communication between my notebook and Epson printer. It goes offline everytime I unplug it from the notebook and there is no way how to switch it on. Although the printer is recognized and scanning is not a problem. Any solution?

I have problems in communication between my notebook and Epson printer. It goes offline everytime I unplug it from the notebook and there is no way how to switch it on. Although the printer is recognized and scanning is not a problem. Any solution?

this is exactly the kind of response i expected, almost begged support to please not do this to me and yet there it is another meaningless, non helpful, standard template response to restart my apple tv.
this does NOT work which is why i am contacting you. i have tried all suggestions about unplugging and restarting and nothing works.
i live in an apartment and logon to the provided wifi wireless. so i do not have access to a router. however, management says they have talked with their provider and have been assured that the required ports are available.
remember all the jokes about how bad windows was because the solution was always to re boot. funny huh? how is apple any different.
i have been to the local apple care store and they are clueless, too.
should we just end it here and you admit that i will not be getting any support from apple on this one? i got the ipad because my kids were such big fans. it is difficult for me to share their enthusiasm.
at this point i am just curious about how you say you cannot support your own product so i can complete my file on this contact.
thanks...sorry it was you who got this problem..

Video audio problem when import to premiere CS4

I have a file encode by flash media live encoder and I try to edit in premiere CS4 but when I import the file the video audio is not synchronised. The recorded file play run good in adobe media player. Any sugestions? Thanks in advance.

Going back a bit over a year, there was a thread on this forum, where the OP needed to use the Flash Live Recorder, as there were both streaming material from lectures and then edited material to go up on their intranet Web site for later viewing. That poster had similar issues with the live material, IIRC.
I am certain that this thread was after the forum change over, so should still be on the servers. Wish that I could recall more details, but in the end, the OP found resolution to the problem. I know that I participated, but from the side lines. Seems that there was even footage of a rock performance involved in the feed and I edited the FLV material on my PrPro 2.0 with Moyea FLV Importer for Premiere plug-in. I'll look in my e-mail and YouSendIt account to see if I can find the poster's name (might not be his Adobe screen name), but a Search of this forum ought to turn up something. I'll also do a Search and maybe between us, we can find that thread, as there might be some useful tips in it.
In the meantime, maybe this ARTICLE can help you edit the OOS issues.
Good luck,
Hunt

Editing Footage between Premiere and FCP

If I gave a Premiere editor low quality small AVI files for him to edit then have him export and EDL and give me it, could I open the EDL and reconnect it with my high quality HDV or Pro-Res files? Thanks

RichCamp,
Forget about AVI files.
Give to your editor an exact copy of your HDV media (On a tape if they are going to start a project from scratch, otherwise a hard drive containing your media if they need to reconnect that to an existing project of yours sent as EDL).
After your editor completes his/her job he/she can send you back a new EDL and the drive with the media used. Simple and easy, done many times. It works just fine.

Editing AE or Premiere CS4 projects in Audition 3?

Is there a way to import an After Effects CS4 or Premiere CS4 project with muitiple audio tracks/layers into Audition 3 and edit/balance each track individually? Have been using Soundbooth to clean up audio from individual video clips, but want to balance & add effects to multiple audio tracks prior to rendering final video. Thought Audition 3 might be a better option than using Premiere's audio mixer?

You can't do it quickly and easily but it is possible by making a rough rendered version (DVavi works well) to work with picture in Audition. Import that into Audition where the video and rough audio will be split to give you a guide track. You can then import all your individual audio tracks saved as .wav files into Audition to work on them and make a final mix to re-import back into Premiere for the final render.

Multi-camera AVCHD editing workflow in Premiere CS4

I have a client project that has me wondering what workflow to use and I someone on this forum probably has the expertise to know the right solution. My requirements...
1. Client is recording a scene using 4 cameras at once, like a live TV show is shot, all AVCHD footage, 1920x1080px 17mbs, square pixels.
2. I must playback in Premiere the 4 video streams in real time and choose one camera to output, like a director would switch a live TV show. So, all 4 streams are playing in Premiere's multiple-camera editing windows. Each show I'm editing is about 1 hour long. The advantage of multi-camera editing of course is I can play all 4 cameras at once and live switch between them in Premiere to arrive at a 1 hour show in 1 hour of editing time.
3. Until I can upgrade my hardware that can possibly handle 4 streams of AVCHD, I'm stuck needing a workflow to convert the original AVCHD to some lowres format, edit those offline low res copies to get my edit decision list, and then reconnect the online HDV AVCHD clips to export through Media Encoder for a final production. My output format is Flash F4V 640x360 px square pixels for Internet playback.
4. Hardware: I'm running Windows 7 RC using CS4 Premiere 4.1, 4gb RAM, 2.4ghz dual-core processor with 64mb Intel turbo boost on a notebook PC. I do have 4 hard drives to hold each camera's footage on its own drive, and a fifth drive to ouput the edited version to, in addition to a drive to hold my OS and Premiere. The external drives are connected via eSATA to the notebook.
Question 1: what do you suggest as the lowres format I should convert my AVCHD footage to for multi-camera playback/editing in Premiere?
Question 2: do you think it's even possible to buy a desktop PC that can handle playback of 4 multicam AVCHD native format files in Premiere in real time? I'm concerned this may be too much for even the most powerful systems, and I would need to resort to editing lowres footage even with the most powerful desktop. As you know, decompressing one or two AVCHD streams is taxing to a PC so 4 at once is a challenge.
Question 3: an alternative workflow would be to feed live video out of the HDMI connectors on the cameras into four HDMI capture cards (Intensity Blackmagic) and capture uncompressed HDV bypassing AVCHD compression altogether, but the disk space required would be substantial. Does this make sense? I've even considered feeding those 4 HDMI feeds into a video switcher between the cameras and PCs but the cheapest solution I can find that can provide genlock (frame sync) between the 4 cameras for clean glitch-free switching is quite expensive, thousands of dollars invested.

I must playback in Premiere the 4 video streams in real time
Good luck with that. Many folks have trouble with even one stream.
edit those offline low res copies to get my edit decision list
I'm not sure offline editing with AVCHD will be possible because of the folder structure. You may not be able to 'replace' the lower res copies with AVCHD.
My output format is Flash F4V 640x360 px square pixels for Internet playback.
Oh, man. Shooting HD of any flavor is just overkill that adds unnecessary work to the process. Have your client shoot in DV.

Jerky Playback Premiere CS4 and Win 7?

Hey
I tried scanning through a bunch of posts to see if anyone else was getting a similiar issue, but couldn't find an answer.
I recently just upgraded my system :
Windows 7 64bit
Adobe CS4 suite
i7 920 processor
Asus P6T SE mobo
6gigs of RAM
ATI Radeon 4800hd graphics card
250gig 7200rpm OS and Prog Drive
640gig video Drive
300gig Scratch Drive
Fresh Install, not an upgrade.
Did all the win 7 and premiere updates and the ATI updates.
My problem is I have loaded up a project that I originally edited in CS3 premiere, loaded it into CS4, let everything load and index.
My playback is pretty jerky. My new system is way faster then my last setup and yet it is running very very poor.
The footage in question is DV footage. shot on DVX100b (24pa) I made sure and checked that CS4 imported it into a proper sequence and everything seems to be lined up properlly.
Am I doing something wrong?
I checked some HDV footage that wasnt playing on my previous set up, which now playsback in a premiere timeline on current setup.
Are there any codecs that I should download? I dont want to rape the system with random codecs and crap.
any info would be greatly appreciated.
Thanks
Abes

Thanks everyone for pitching in. I didnt reply sooner because my deadline was
pressing hard. Finally managed to create output with CS4
. Also found that the reason my old PP1.5 was crashing was because I was trying to load a project that had already been saved out by me in CS4 What an idiot LOL I put it down to pressure.
But, on to the meat of the issue. First, in answer to an earlier question, yes once i have rendered a preview my monitor scrubs and plays properly however, Its totaly counter intuative to the way one edits a movie. the whole pre-rendering twaddle interferes with the creative process in my opinion. In PP1.5 even if sometimes a little scratchy a simple cross or additive dissolve would preview perfectly fine. This meant that the software didnt encroach upon what should be a transparent to the editor process. I come from 16 and 35mm film and video as a background and of course this stuff has come a long way since then, Im talking 1969 by the way.
But surely in so many ways PP CS4 is almost a monster step backwards.
If basic footage needs pre-rendering to work well in the time line, why isnt that an option at import time ? Then at least dissolves and the like would be the only thing the processors need to worry about if the basic image blitting to screen has been taken care of by what I imagine is some kind of proxy.
OK thats my 4 penneth as they say in my mother blighty.
regards Paul C Buckland

Problem in audio conferencing using Flex and FMS3.0

Hi Everyone,
I am trying to achieve audio conferencing using Flex and
FMS3.0
Currently I am following an approach where all the persons in
voice conference publish their voice on flash media server using
NetStream.Publish() function and all persons listen to the streams
published by all other members in the conference using
NetStream.Play() function. I am using a shared array on server side
to keep track of all the persons present in the conference. The
problem I am facing is that sometimes all the persons are able to
hear the voice of each other but other times audio of some persons
is not audible to others. Even if voice comes then there is echo
and one can hear the sound 3-4 times depending on the amplitude of
the sound. I have also used Microphone.setUseEchoSuppression(true)
to suppress the echo but it is not effectively suppressing it. If
someone has faced similar problems in past please let me know the
solution. Thanks in advance.
Regards,
Pankaj

I know.. but it was wrapped as jar or war files..
I searched all over my harddrive to find something named like org.apache or jdbc.clientDriver...and so on..with no result.
and I unziped derby.jar or derbyclient.jar etc.. also with no result.
It's like the driver has hiden somewhere like viruses...at least to me..
Edited by: dewyone on Dec 25, 2007 1:48 PM

No audio in Premiere CS4

I've a problem with Premiere CS4: Simply I hear no audio. I've tried to insert in the time line various kind of films or single file audio but I see moving the audio level display without hearing nothing.
Can someone help me?

See also:
FAQ:Why is there no audio on the timeline?
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Problem editing audio timings

Help !!!
While editing audio timings the file size increases.....often
doubling in size for not apparent reason

Hi Deeb07,
First, be sure this is actually a problem for you. If it is
just the "idea" that the file is larger that bothers you, try to
ignore it. But if it is affecting your machine's performance while
working with (editing) the project, then it is an issue that needs
to be corrected, so read on ...
Captivate creates and maintains two file-types for each audio
clip. One is a WAV file for editing purposes, and the other is a
MP3 (created from the WAV) which is used in the published output.
When you edit the audio, the newly changed WAV file is probably
added to your library, creating the larger working file - it should
not affect your output SWF file.
If file-size is excessive after completing your changes -
repeat, after completing your changes - you can usually affect a
huge decrease in file size by the following actions.
1) Use FILE > SAVE AS to create a copy, to protect the
original
2) On the new copy, go to AUDIO > ADVANCED AUDIO
3) Select all audio files on your slides (CTRL + A is the
shortcut)
4) Export all to an empty folder - be sure to include both
file-types
5) With ALL audio still selected, use the "DELETE" icon to
delete all
*Note: First, make a note of which audio file goes with each
slide
6) SAVE your project, with NO audio
7) IMPORT the previously exported MP3 files back into proper
slides
**Note: Captivate will automatically reproduce the WAV files.
8) SAVE once more - your CP file size should be much smaller
now.
Hope this helps. Another member and I recently used these
steps to reduce one of his CP files from nearly160Mb to less than
55 Mb, and I'm confident it will work for you as well.
Have a good day!

Is Ciniform still the way to go for editing HD on Premiere CS4?

Hi all,
I may have a opportunity to edit an inde film shot in on P2 HD 1080p. However, i have a few questions....
0. can Premiere CS4 read and edit MXF files?
1. I'm not sure if my Premiere CS4 system will handle it natively without using an intermediate codec like Ciniform. The files have already been transfered to an external drive which i will then transfer to my systems' video drive. The following is my current system configuration:
. Premiere CS4
. Windows 7 x64
. 12gb of DDR3 ram
. Intel 920 quad core processor
. 1tb (2x500gb) video drive
. 1tb (2x500gb) storage drive.
2. The client is not sure the frame rate the video was shot in, either 24p or 59p. Is there a way to determine the correct frame rate so i can select the proper preset in premiere? I may be able to use VLC to view the codec information.

nados wrote:
Thanks, that's good to know.
Now i just have to figure out how to get paid for editing this indie film. They called asking me to edit it now and get paid later - yea right!
Get paid before you deliver it.

Editing Audio from PP CS4 in Soundbooth coming back out of sync.

After cleaning up audio from PP CS4 using the "edit in Soundbooth" option. The audio comes back out of sync. How do I solve this?
thanks!

I am sorry for the confusion. When putting the playhead in the middle, the instrumental sounds as if somebody has slid it to the right. No, it does not start early and end late. It (the instrumental) is just at a later part of the song no matter where I put the playhead. For example, I put the playhead at a certain point of the song, and at that point the instrumental is sounding a part of the track located at an earlier location of the song (maybe a second or 2). There is no change in pitch...the instrumental sounds the same...it is just at the wrong location every time I put the playhead anywhere but the beginning of the song.

PROBLEM EDITING AUDIO BETWEEN PREMIERE CS4 AND AU OR SB

Similar Messages

Maybe you are looking for