(problem, emergency) Lenovo S650 Stuck at boot animation/image after system reset.

Hello as the title says I made a full system erase/reset from the recovery mode (power + volume up + volume down) and now the phone stuck at the boot animation/image. Please somebody help me I am in hurry and this is an emergency! model: Lenovo S650firware: 4.2.2 stock Thank you!

pls help me   https://forums.lenovo.com/t5/S-and-Vibe-X-Series-Smartphones/hello-im-have-proplem-in-my-lenovo-s650-pls-fix-it/m-p/2133943

Similar Messages

  • Strange problem with Lenovo S650

    I have an interesting problem with Lenovo S650.
    If it stay in 2G/3G mode - it connect and work in 3G network well. But if I put "only 3G" mode, it don't connect to the 3G network.
    I changed SIM-cards, modems, firmware, mobile operators -  Nothing change.
    What is the problem? Thank you.

    Because your network needs both 2G and 3G to establish an internet connection. When the signal is low ,3G is favored/preferred (WCDMA Preferred or Auto )...but that uses more power. Don't actually need 3G all the time.
    This isn't the root of your problem ...Actually isn't a problem at all .
    Now can you tell me your firmware build number(Settings>About phone.. ) ?
    Did you had this problem from day 1?
    Did you get the phone from China and flashed the ROW firmware yourself? Got the firmware from some Russian forum and changed some regional code at the first boot...by any chance?
    Beside flashing different baseband modems, have made other alterations (Like changing engineering mode settings... )
    Thanks
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
    Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Screen is stuck on Apple icon even after I reset

    Screen is stuck on Apple Icon even after I reset the device ? Sugggestions?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • Lenovo s650 won't boot, USB doesn't work

    I bought this phone and installed a root app. I may delete some system files with root app. Since that, the phone won't boot. I tried Smart Phone Flash Tool but the Firmware won't be updated as USB doesn't work. What can I do at this point? Please help!

    Hi fiddlehead53 (my fingers hurt)
    What Windows version are you using?
    For XP/Vista/7 Follow message 7 of > https://forums.lenovo.com/t5/Lenovo-Phones/Lenove-S650-sound-issue/m-p/1413747/highlight/true#M3660
    PS.''MT65xx Preloader'' will pop just for a short time so you'll have to be quick !
    Let me know how it goes.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
    Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Lenovo A850+ Stuck on BOOT

    Hello,
    I accidently removed something of the Lenovo's Launcher and then the phone UI was removed, Nothing worked. I did a restart (getting battery out and then in). but then the phone started and stuck on the Lenovo's logo. I tried getting into the boot menu but it's in Chinese :x. Please guys help me

    Hi
    To enter recovery mode you have to simultaneously press and hold POWER BUTTON,VOLUME+ and VOLUME - (YES,BOTH VOLUME BUTTONS).
    From there you can factory reset the phone.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
    Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Lenovo B590 stuck on Boot Menu

    Hi,
    I am having an issue with a Lenovo B590 which is stuck on the boot menu:-
    I have checked the HDD with a couple of utilities and it looks fine. Has any one come across this?
    Thanks 
    Mark

    Hi Spen, 
      my first question would be, 
    Are you running the latest BIOS version ?
    Lets make 2015 the year of the #DO
    Did I or someone help you today? Press the star on the left to thank them with a Kudo!

  • New Lenovo E540 stuck on Boot Menu?

    My new Lenovo arrived today and I can't even start it. 
    I press the power button and it goes straight to Boot Menu and App Menu. 
    I don't want to mess around with the settings because I don't know much about computers. 
    How do I get to Windows?
    Please help!!

    Hi Ktkt2289,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing the issue with not Booting to Windows on your ThinkPad E540.
    Please check if the system is shipped with pre-loaded Windows OS.
    Keep tapping F2 key after switching ON the system this will take you to BIOS option and there go to Boot option and check if you are able to see HDD there.
    Check and confirm if there is any Windows COA sticker at the bottom of the laptop.
    Please provide the system MTM (Machine Type Model) number which will be at the back of the system written on the white sticker.
    Hope to hear back soon!
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Lenovo G580(20157​) usb boot not working after windows 8 installati​on

    Hi,
    I have lenovo G580 (20157) model. previously i had installed Windows 7 and Ubuntu 12.04 with no problem. Today i decided to go for windows 8.1. it installed perfectally without any issue ( Legacy mode non UEFI ) and working fine but ubuntu live USB is not booting up, when i select Boot from USB windows 8 starts. I really need Linux in my laptop. Could anybody help ASAP.
    Solved!
    Go to Solution.

      This guide is not System Specific and not all of the option may show inside a certain BIOS version, Just Make sure that all optionlisted here that is available on a Lenovo BIOS is set as follows.
    Ideacentre BIOS Menu is F1 and F2 for Ideapad.
    Under Exit TAB
    OS Optimization
    OS Optimized
    For the two options above:  Should be set as Disabled or Other OS
    Under Boot Tab / Start up Tab
    Boot Mode Should be set to Legacy
    Boot Priority Should be set to Legacy First
    UEFI Boot should be set to Disabled
    Quick Boot should be Disabled
    StartUp device Menu prompt should be Disabled
    Quick Boot Should be Disabled
    USB Boot should be Enabled
    Secure boot Should be Disabled
    Once everything are Set, make sure to save all changed by hitting F10 and Enter for Yes
        After Hitting enter It will Restart and You will have to keep on tapping F12
           this should pull up the Boot Menu letting you select where to boot.
    If not succesful pulling up the boot menu after the restart, Power Drain the System and turn it on while hitting F12 Again.
    Regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Lenovo G780 stuck in Automatic Repair Loop after Windows 8 update

    My recent Windows 8 update stuck my computer into an infinite automatic repair loop which results in a blue screen amd the process repeats itself. I tried the OneKey restore feature and the system recovery feature just hangs then it goes back to the same loop issue with rebooting. I called Lenovo for recovery discs since I don't have any any but my concern is does it matter if I mentioned whether I had a 32 or 64 bit OS? I told her to make sure it was for a Windows 8 system amd she just said it works for the G780 models. I'm just hoping these discs work.for a 64 bit system

    It should work. Support cannot send you recovery disks if you didn't provide them your serial number. They can check the correct pre-installed OS from your serial number so I'm sure they're sending out the correct disks.

  • Stuck on Boot 3rd Gen after upgrade to ios 8.1 via itunes following init

    Yesterday the latest update was applied and the initialization questions completed.
    The device rebooted and now it does not get past the apple logo.
    If the power and home button are held down together it turns off. If the power button is pressed it displays the apple logo.
    There is no other functionality.
    Is there a way to fix this or does it need to be reset, or restored from backup?
    The ipad was too full for a normal update but itunes thought it had enough space to upgrade.
    It went through the initial init screens just fine after the upgrade. It was only after it went to reboot following this that there was a problem..
    This iPad has Verizon service on a shared account. The sim card is not the one it  shipped with.
    It is 3rd Gen retina display 64gb wifi / 4G wireless
    You would think there would be a community per model and a discussion about upgrades.
    But alas no.

    I hope you have a backup for the device because you will need to restore the device. To put your device into recovery mode plug the device into your computer with iTunes then press and hold the home button and the sleep/wake button. The unit will power off and turn back on, right before the Apple logo appears release the sleep/wake button and the iPad should show the iTunes logo. In iTunes open your device and press the restore button. When the iPad finishes reinstalling iOS, select your latest backup either from iTunes or on the device through iCloud backup and your device should be good to go.

  • MacBook Pro Retina 2013 stuck on boot every time after iPhone 5S is connected to it.

    I have a MacBook Pro Retina 2013 and I've noticed that every single time I connect the iPhone 5S to it at the next boot the Mac hangs.
    Booting in Safe Mode will eventually work (after about 20 minutes).
    I can reproduce this every single time with this combination. Any advice?

    You can try resetting the PRAM and SMC, but both of your devices are new. You can just make a Genius Bar appointment and let them figure it out.
    SMC
    http://support.apple.com/kb/ht3964
    PRAM
    http://support.apple.com/kb/PH14222

  • Iphone 3gs ios 6.1 stuck in boot loop even after restore

    What happen was it froze so I did a hard rest after that it stayed on a boot loop. Done restored it several times stayed the same after I do a restore itunes does recognize the iphone but it stays on the Apple logo can anyone help

    Something does not sound right with your story. An iPhone 3g is only capable of running iOS4.2.1 and not 6.1.6. Since the iPhone now appears to have relocked itself to the original carrier, it sounds like that iPhone is jailbroken to allow it to run a version of iOS that it not supposed to and to unlock illegal from the original carrier. Either get you details straight or we can't help you.

  • Stuck in GRUB (S)Hell after system update

    So, I did a system update, which involved the manual steps to relocate binaries, which I did. Update completed successfully but ever since my machine boots into GRUB shell and I cannot boot the Arch image. I run dual boot with Arch64/Win7 and can boot Win7 just fine using
    root (hd0,0)
    chainloader +1
    boot
    but if I try to boot arch using the same sequence
    root (hd0,3)
    chainloader +1
    boot
    It just sits on a message telling me it is starting up, but nothing happens...
    Thoughts?
    Thanks !
    Last edited by void7910 (2013-06-24 19:49:37)

    WonderWoofy wrote:kay... pretend like yu are totally unfamiliar with your problem.  Then read through your post.  Can you dtermine what it is that is going on, or what you are asking from just that information?
    http://www.catb.org/esr/faqs/smart-questions.html
    Yes, you can. He updated the system and when he rebooted he was stuck at the grub shell unable to boot.
    First to boot you should try this:
    find /boot/grub/stage1 //use this to determine your boot disk and partition
    root (hd0,3) //replace 0 and 3 by the numbers determined above
    kernel /boot/vmlinuz-linux root=/dev/sda4 //replace 4 by the partition number (+1)
    initrd /boot/initramfs-linux.img
    boot
    If everything went right the system will boot, then you can rename /boot/grub/menu.lst.pacsave to /boot/grub/menu.lst:
    mv /boot/grub/menu.lst.pacsave /boot/grub/menu.lst
    or fix grub2 by following the last part of this post:
    https://bbs.archlinux.org/viewtopic.php?id=165721

  • My ipod is stuck on the adapter image after the update

    I downloaded the update a few days ago along with the itunes update but my ipod only shows two images now, the one of the adapter and the apple logo when it first turns on...so i plugged it into the wall but that has had no effect. my computer doesn't recognize it and neither does itunes, ive tried resetting it also but to no avail......any help would be greatly appreciated :\

    I tried it again with a new plug, same outcome, im pretty sure my ipod is receiving power from the outlet though because its normally turned off before i plug it into the wall and then turns on after i do

  • Problems with the bluetooth in Lenovo S650

    Hi All,
    I'me facing a problem in sending files with my new Lenovo S650 by bluetooth.
    I can't send any file with my mobile to a Laptop. I already have my mobile and Laptop connected with each other...
    I can send from the Laptop to the mobile but in reverse I can't. What can I do?
    Do you know what's the problem?
    Thanks.

    Hi,
    The problem is not the phone....youre laptops Windows is.
    Check you're sharing options and the Bluetooth suite/drivers.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
    Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

Maybe you are looking for

  • Application doesn't render the updated changes

    Hi Experts, When ever I made changes in the abap code / javascript and run the application directly from IE instead of SE80 I can't see the updated changes in the screen, instead scrap dispaly on the screen. It is the behaviour untill I delete all th

  • Blank Business area

    Hai The issue is IU posting in TC- F.5D & F.5E in quality & production is not matching.It gives correct posting in quality i.e in production server it nulifies the debit & credit balance of adjustment a/c G/L,but there no correspondence IU posting in

  • Center page for any display resolution

    i want my page to display in the center of any display with any resolution. for example, when the window is smaller the page gets pushed over to the left. and when it is resized it stays in the center (full screen) here is a page that does what i am

  • GB shuts down when I try to print

    I've been trying to print music notation. There are 4 different tracks and I've tried unsuccessfully to print pdfs of each track. Each time I try it simply shuts down. I've moved the tracks around. Renamed everything. Resaved everything. Changed some

  • How do I sign out of Messages on Mountain Lion - HELP :)

    I want to add or use another apple id that will use messages. Im fairly new to make and can't figure this one out.  Thanks for helping!