Problem error pdp with apn private os4.0

goodmorning
I have problems with authentication (PTO) with authority configuring iPhone Configuration Utility to configure the proxy. If I configure the APN from the mobile I have no problems but no authentication nriesco navigate through proxy.questo happens to me after updating to iPhone 3Gs from OS3 OS4.

up

Similar Messages

  • [AMD] problems errors ram with cpu vcore change on k7n2 delta2 platinum

    hello
    i'm a french new owner of k7n2 delta2 platinum and i got something strange.
    I have 2*512 PC3200 cas3 of kingston value ram with voltage 1.75 instead of 1.6v running in dual CAS 2.5/3/3/8 at FSB 195 like the cpu : 2500xp barton.
    With occt and memtest86+ i'm stable with a CPU vcore at 1.725.After 195 the computer starts but not really stable. So i put the cpu vcore at 1.75 to put higher fsb and then i get thousands RAM errors with memtest(even if i stay fsb 195). i tried with cas 3/3/3/11 and it was worst. On the bios B5 i tried with different settings : agressive, optimal, 1/1, auto, manual, patch ddr or not...and always the same. My PSU is 450w noname and i've 4 HD 1player 1 burner & a geforce 5200 o/c 10%.
    Of course i'm happy to reach 195 but i feel disapointed to be stop with this problem of vcore/ram because i have not problem of temperature with a silent boost for cpu(52°c maxi), 3 fans for the box(35°c maxi) and copper memory heat spreaders for ram.
    thanks for your answer

    the thing to check is the vdimm voltage for the ram ... i'm pretty sure it should be around 2.6 volts .. try upping it one step
    vcore is the voltage to the cpu and doesn't affect the ram

  • Problems errors ram with cpu vcore change on k7n2 delta2 platinum

    hello
    i'm a french new owner of k7n2 delta2 platinum and i got something strange.
    I have 2*512 PC3200 cas3 of kingston value ram with voltage 1.75 instead of 1.6v running in dual CAS 2.5/3/3/8 at FSB 195 like the cpu : 2500xp barton.
    With occt and memtest86+ i'm stable with a CPU vcore at 1.725.After 195 the computer starts but not really stable. So i put the cpu vcore at 1.75 to put higher fsb and then i get thousands RAM errors with memtest. i tried with cas 3/3/3/11 and it was worst. On the bios B6 i tried with different settings : agressive, optimal, 1/1, auto, manual, patch ddr or not...and always the same. My PSU is 450w and i've 4 HD 1player 1 burner.
    Of course i'm happy to reach 195 but i feel disapointed to be stop with this problem of vcore/ram

    Quote from: osnavi on 23-September-05, 11:36:11
    "...So i put the cpu vcore at 1.75 to put higher fsb and then i get thousands RAM errors with memtest..." I would say it's not the v. core but the CPU o/c. that gives that errors, as it make not sence to increase v.core only for itself.
    Oh yes it does
    The CPU and memory work hand-in-hand. If one is out of sync it can cause the other to start spitting out errors.
    You are overclocking and that more of a scientific art, not an exact science.
    Components react differently to an entire list of variables, especially the CPU/memory.
    What you are trying to do requires trail and error testing however I agree the Kingston memory is holding you back at this point with the clock you are pushing
    I would go for the most stable FSB settings that allow Dynamic Overclock to be enabled to SERGEANT before I would go for ultra High FSB because you will peak the system at its highest performance curve when you need the boost, and I would bet money that peak would be higher than any strait FSB over-clock you can hit stable.
    Psychologically allot of people think their systems are not running the highest performance it can unless they set the system up at the highest FSB/multiplier and that is simply not true with dynamic overclocking enabled and correctly tuned with the rest of the components.

  • I have an alert message in disc utility. Error: storage system verify or repair failed. Problems were found with the partitian map which might prevent booting.

    While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

    While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

  • I am having a issue installing Adobe Acrobat XI.  I am running Windows 8.1. When  go to install it gets an error.  The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.

    I am having a issue installing Adobe Acrobat XI.  I am running Windows 8.1. When  go to install it gets an error.  The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.
    I have tried to uninstall all Abode Acrobat installations but one file remains and refuses to be uninstalled. It gives me this error : Error applying Transforms . Verify that specified paths are valid. It was installed on Sept 18 2014.  I have downloaded a Transform update but it tells I do not have a Adobe Acrobat product installed. 

    Hi all,
    Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
    I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
    When I compile using "javac" I get an error saying "javac" is not recognised.
    When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
    Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
    I have removed all previous references to java in the registry editor.
    Please help !
    Regards,
    Vipul

  • Having installed an upgrade for Photoshop Elements 13, I cannot open the application. I get an error message saying "Adobe Photoshop Elements Editor cannot be opened because of a problem. Check with the developer to make sure Adobe Photoshop Elements Edit

    Having installed an upgrade for Photoshop Elements 13, I cannot open the application. I get an error message saying "Adobe Photoshop Elements Editor cannot be opened because of a problem. Check with the developer to make sure Adobe Photoshop Elements Editor works with this version of OS X. You may need to reinstall the application. Be sure to install any available updates for the application and OS X".
    I have since uninstalled and reinstalled the app, but get the same error message.

    Which version of OS X do you have? It's not clear from your post whether "installed an upgrade" means you just installed PSE 13 as an upgrade or you installed an update to PSE 13, like ACR 9 or 13.1. Please clarify.

  • RRI Problem in EP - An error occurred with the report to report interface

    I have a problem with a template: In standalone the RRI call works, in EP the same template fails with "An error occurred with the report to report interface during the jump" and details "Notification Number BRAIN 192"
    The JS-code is:  SAPBWOpenURL(targetLink);
    In both cases (standalone, and in EP ) the targetLink is
    /sap/bw/BEx?SAP-LANGUAGE=EN&PAGENO=1&CMD=RRI&RRI=X&RRI_RECEIVER=QURY0001&REQUEST_NO=2
    However, standalone it works, in Portal it fails with the above message.
    Any idea?

    Hi Frank,
    What was the solution?
    Regards,

  • HT201442 I am got error while trying to restore,, but i just only error file with 3194. I try many step by install lastest version and fix host file, but still fail. Anybody can give me any key point to solve this problem? Thank you

    I am got error while trying to restore,, but i just only error file with 3194. I try many step by install lastest version and fix host file, but still fail. Anybody can give me any key point to solve this problem? Thank you

    Error 3194:
    This device isn't eligible for the requested build
    It means that Apple has stopped signing the version of iOS that you have, try downloading the latest iOS version, then try Restore again.

  • I don´t get any Java Script referral on the: Exc in ev handl: Error: Bad NPObject as private data, what is then my problem?

    Exc in ev handl: Error: Bad NPObject as private data
    This is the pop up that keeps annoying me in FF. You send me the question: The box that the error is in says something about JavaScript?
    I´m answering NO!

    This issue can be caused by an extension that isn't working properly (McAfee Site Advisor).
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Can anyone fix this issue? It is both on my home and office computer anf from online blogs it seems to be a large problem for many. Exc in ev handl: Error: Bad NPObject as private data!

    Exc in ev handl: Error: Bad NPObject as private data!

    Disable "McAfee Site Advisor" extension which was just updated to 3.4.0, which probably took it out of the addons block list.
    * "Ctrl+Shift+A" > find McAfee Site Advisor and use "Disable", and then restart Firefox.
    * Do a Google Search no problem
    * It seems that if you re-enable Site Advisor again, and restart Firefox you are okay. At least you know where to look if you get the error again or Google searches slow down.

  • I have downloaded AI Trial but am getting a Configuration Error as follows 'A problem has occured with the licensing of this product. Restart your computer and re-launch the product.  If this problem still occurs after restarting, contact Customer Support

    I have downloaded AI Trial but on launching I am getting a Configuration Error which reads '
    A problem has occured with the licensing of this product. Restart your computer and re-launch the product.
    If this problem still occurs after restarting, contact Customer Support for further assistance, and mention the error code shown at the bottom of this screen.
    Error: 213:5.
    I have tried the restart suggestion, but the problem persists.
    Can anyone assist.
    TIm

    Tim,
    This may be one for this specialized forum (where you may be able find the answer from previous threads),
    http://forums.adobe.com/community/download_install_setup
    or for a chat,
    Creative Cloud support (all Creative Cloud customer service issues, chat open between 5AM and 7PM PST/PDT on workdays)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html
    or for Adobe phone Support,
    http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html

  • I am having a problem opening pdf files.  I get an error message saying   a problem has occurred with the licensing of this product. Restart your computer and re-launch your product. If this problem still occurs after restarting ... error code:213:19  Can

    I am having a problem opening pdf files.  I get an error message saying
    a problem has occurred with the licensing of this product. Restart your computer and re-launch your product. If this problem still occurs after restarting ... error code:213:19

    Hi AdobeFiles,
    I'm sorry to hear that you're unable to open PDF files. Please see this Help document: Error 213:19 | Problem has occurred with the licensing of this product | Acrobat X and XI for solutions.
    Let us know how it goes!
    Best,
    Sara

  • I still cannot sign into eprint center despite everything, always an error with my private email

    address. i see that this has been a familiar and very frustrating issue for many. i read that i am not suppose to sign in with the printer email address so I don't know what to do. I registered it with private email, somewhere along the line i think it was switched to default but who knows. Regardless, it won't let me set up an account with my private email because its "in use". well yes its mine but its not "in use" for sure. I have read so much last night and now more hours tonight. I do know that we are not suppose to use the random printer email address to sign in so i dont know what to do. just seems ridiculous that this is so complicated. my whole intent is to change my printer email to something more user friendly, see what apps people really like to use that i can add...... but left at the door. HP? someone smart? please help......

    I was able to use eprint center, but my personal email address didn't work, same as yours. I never saw instructions to not use the random printer email address, and I finally tried that and it worked. The email address was the Printer Code @hpeprint.com. Once I got in like that, it let me create a nicer email address for my printer, but the suffix is still @hpeprint.com. I have not been able to use my personal address in the eprint center, so I guess it really wants the printer's email address. I hope this helps you!

  • Having problem with update new os4.3.2 of ipod touch G4

    Dear All
    can anyone help to solve my problem, that i can't update lastest version OS 4.3.2 of Ipod Touch, because now i have problem on screen display by using os4.3  as i have tried many times but i can't get the lastest one. so please give me suggestion

    When plugging the iPod into iTunes and it loads then click on the iPod tab and then press the Update button if it does not propmt you itself.

  • I rcvd the following error : Exc in ev handl: Error: Bad NPObject as private data! What cause this problem ? Thanks

    Whenever opening a new link, rcvd the following error : Exc in ev handl: Error: Bad NPObject as private data!

    this issue can be caused by the McAfee Site Advisor extension. See:
    * https://community.mcafee.com/message/203466
    * https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes

Maybe you are looking for

  • Windows Display Driver Problem.. Please Help!!

    Hi, I get a blue screen with this message.. A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ati2dvag If this is the first time you've seen this stop

  • How can I burn somgs I have on my Zen Xtra to

    Hello guys again. I have so man songs on my mp3 player now and my friend wants me to burn him a cd of an album i have on there. When I open media source organizer I do not have a burn cd option or anything. I know there is a update for this but whne

  • Resolving host difficulties

    Greetings.  I just upgraded from phone internet to phone internet and broadband. While the installer was here, I askied him about the xfinity router "resolving host" issues when folling imbedded links, etcetera. He said it was my computer:  but when

  • Re: "Contains unsupported data types" error

    Hi, I am new to R and oracle. I am having a problem hope you could help me with the same. I explictly gave the ore.sync(table = c("TAB1", "TAB2")). But i get the following Error Error in .oci.GetQuery(conn, statement, ...) : ORA-02289: sequence does

  • Show 2 line graphs together in Line bar combo graph

    Hi, I am currently working on to show data for 2 years (which will be selected through prompt), month on month basis in Line-Bar Combo Graph. I could achieve to show 2 years of data month on month basis in Bar Diagram, but the same is not happening f