Problem: Everything needs rendering

I have an irritating problem in that whenever I capture video from my DV camera, then edit it into a sequence it always says that it needs to be rendered, which doesn't make sense. I have no idea why this is and can't find any mention in preferences etc as to why this should be.
I also get a similar problem when importing existing video and audio files.
I am using Final Cut Express HD 3.5.1 on a 2.33 GHz Intel Core 2 Duo iMac with 3GB memory. My DVcam is a Canon MVX30i (PAL)
I'm fairly sure there is an extremely simple answer to this problem and that I will be welll and truly ashamed at myself for not spotting it but to save me tearing out my hair can anyone point me in the right direction.

Hi Tom, thanks for answering,
Right, I will admit that I am a complete beginner and so am probably looking in the wrong places for these facts:
Looking at the Item properties for one of the movies I have tried to capture it says the audio is mono, the aud rate is 32.0 KHz and the aud format is 16-bit integer and the data rate is 3.6MB/sec.
I have been capturing the media using the DV-PAL 32 KHz FireWire Basic setting
As for the sample rate I don't know where to find that out.
Sorry to be a clueless newbie. Any ideas?

Similar Messages

Everything needs rendering

I've recently filmed a project on DV format but in SP mode. FCE AND FCP recognises and captures the footage and plays it perfectly in the viewer, however when I put it on the timeline, a red line appears above it which says it has to be rendered before I can see it. I changed the easy setup in FCE and FCP to DV PAL, but it still doesn't work. Thank you in advance.

Rhys,
First things first. SP mode is normal speed; that's a good thing. Second, you have to use the correct FCE Easy Setup for your camera. Assuming you have an NTSC camera, you have to use one of the NTSC easy setups, most people use the NTSC-DV setup. DV PAL setup won't work unless you have a PAL camera.
It sounds like an incompatible easy setup. One thing I would also check is your camera's audio setting - is it set for 12 bit or 16 bit audio (it should be 16 bit).
Is this the first time this has happened?

Newly Captured Clips Need Rendering--why?

I've seen similar questions posted about things needed rendering when it seems they shouldn't...but none of the answers seem to help me and none are exactly the same, so...
Here's my dilemna:
I've been using Final Cut Pro on a G4 Power Mac with a 1.25gig processor and 1 gig of RAM and it's been fine for my purposes. Even though I've been using high def video, newly caputres clips don't need rendering until I start working with them (as they shouldn't).
BUT...I've tried installing the same software on both a MacMini and a PowerBook G4 (each having the same speed processor) and with both alternate computers a newly captured high def clip will appear with a red bar over it, I won't be able to preview anything but a still, and rendering will take about 7 minutes per half minute of video. My question is why?
It's primarly the PowerBook I want to get going on Final Cut so I can edit wherever I am, but I can't work with it if I need to render every fresh clip. Two small differences : (1) My PowerBook only has 756 megs of RAM as opposed to a full gig on the PowerMac. (2) I'd done other projects on the PowerMac with FinalCutExpress before getting Pro, so maybe there was a codec already installed on that one that I need on the PowerBook.
If anyone can help, I'd really appreciate it. It seems like what works with one 1.25 gig processor should work the same with similar chips on different computers, but it doesn't...

Quite right, David (and Jerry). My problem was indeed a matter of the setup not matching the formatting of the clips. I had a hard time understanding that this was the problem because EVERYTHING seemed to work on the PowerMac and NOTHING on the PowerBook (or MacMini which I set up with FinalCut to see if the PowerBook was to blame.)
I guess it was just a matter of being lucky that the PowerMac's setup was correct for what I was doing and unlucky that the PowerBook's was not. Anyone experiences similar confusion may also be helped by a Shane tutorial I found in a separate thread--
http://www.proapptips.com/proapptipsvideotutorials/194F4DC2-ACBB-4DD6-A1D0-F46D7 D8DCAFC/53B46BA3-E23E-4ACD-888F-1E931224596B.html
--it broadened my understanding of setups and sequences. Thanks, all.

Photoshop has encountered a problem and needs to close

I have had the cs4 software about three weeks, Everything has been running perfectly un til this morning. I was attempting to past an image to a vanishing point and got the hourglass/ spinning circle that is was working, then an error message about memory and photoshop needs to close. I closed all other programs and rebooted to attempt to correct whatever issue it had. Now whenever i try to use the program it lags badly with the simplest of tools(quick select) and then i get the photoshop has encountered a problem and needs to close. I am running windows 7, 3GB ram 2.75 usable, anthalon amd 2 dual core m300 2ghz 64 bit,
AMD M880G with ATI Mobility Radeon HD 4200
Can someone please help me figure out how to fix this.

Fault bucket 19706014, type 4
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: Photoshop.exe
P2: 11.0.2.0
P3: 4bf2d91c
P4: VanishingPoint.8BF
P5: 11.0.0.0
P6: 48d395f1
P7: c0000005
P8: 000000000004a430
P9:
P10:
Attached files:
C:\Users\Johnny\AppData\Local\Temp\WERB71F.tmp.WERInternalMetadata.xml
C:\Users\Johnny\AppData\Local\Temp\WERFBFC.tmp.appcompat.txt
C:\Users\Johnny\AppData\Local\Temp\WER9A4.tmp.mdmp
These files may be available here:
C:\Users\Johnny\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Photoshop.exe_e 4881f26a567c586252e8667502237add319ee67_0ccd2665
Analysis symbol:
Rechecking for solution: 0
Report Id: c3830bd2-e129-11df-a41a-000272ab905c
Report Status: 9

Adobe Photo Downloader has encountered a problem and needs to close. We are sorry for the inconvenience. Error Code: c0000005 Address: 76f73ac3 I clicked on the OK button and the downloader closed. I then tried to download from the organizer. I

Photoshop Elements 12
Adobe Photo Downloader has encountered a problem and needs to close. We are sorry for the inconvenience.
Error Code: c0000005
Address: 75e32f71
I clicked on the OK button and the downloader closed.
I did a search on this error code (c0000005) and there seems to be a workaround but no solutions, why is this? I ask that because this problem seems to be years and years old, going back to at least 2005 (do the math that is 10 years).
I don't even have the Camera hooked up and I get this error on download. I redownloaded everything and reinstalled. I allso saw the AVI issues reported with this proble so i updated Quicktime though without the camera being hooked up when I get this error I didn't expect that to work. I tried support and they wouldn't help because I bought it in March this year. Pretty frustrating as I have re-purchased Elements about every 2 years. I think I might need a new CODEC? I had this problem on an Earlier version And I seem to remember that being the Fix but this may be something completely different

I finally found that it was missing a picture so the Catalog was "corrupted". I just deleted the picture and it started working.
I hate Adobe and their total lack of support - thanks for nothing Adobe . Also get this - they offered me to upgrade to 13.0 ( My 12.0 is only 6 months old but they still don't support it on errors. Only install errors!
I have upgrade and repurchase this product 4 times now. I will find something else next time!

Adobe Acrobat 9.0 has encountered a problem and needs to close

Hi!
I'd like to start using Adobe Acrobat 9.0 with Acrobat.com, but I don't get very far before I get the error message "
Adobe Acrobat 9.0 has encountered a problem and needs to close." This happens after I click "distribute form" and fill out the email addresses. It get to the point of starting to publish the response files and then the error message pops up and I can't go any further. I've made sure to uninstall older versions of Acrobat and I restarted my computer. I have a PC and am running Windows XP and IE 7. Help!

Bill:
Thanks for all the tips. Actually I already did most of this (multiple times) to no avail.
·         I’m running Win XP Pro SP3 on a Dell Latitude D630 laptop with 2GB memory.
·         I Bought Acrobat 7 Standard (it came bundled with my scanner) so I do have that CD and the key
·         I purchased the upgrade to Acrobat 9 Standard on-line for $99.
·         Actually, everything was working fine until I uninstalled ATM. (I did that because my laptop wouldn’t undock or hibernate and I read that ATM could be the cause.)
·         I’ve done several repairs from Control Panel. Didn’t help.
·         Finally, this morning I decided to uninstall everything and install a trial version of Adobe 9 PRO from their web site. That didn’t work either.
·         I notice that none of these actions has brought ATM back. On the other hand, I can’t find a place from where I can download ATM either.
Here’s the really funny thing. Acrobat is not completely broken. I can actually get it to work for the first few seconds. And if I type real fast, I can even save the pdf file that it opens before it crashes! For example, if I click on a pdf file on a web page and it is small enough that it opens right away, I can click the save button and hit OK immediately (don’t mind where it saves the file, I can find and move it later) before I get the “Adobe Acrobat 9.0 has encountered a problem and needs to close. We are sorry for the inconvenience.” message. The same happens if I just open Acrobat and let it sit. It doesn’t crash immediately. It takes about 5 seconds before it does.
This should give a clue as to where/why it is crashing.
Tomorrow I’m going to try and get Adobe on a chat line and have them take a look.
Let me know if you get any other good ideas. Thanks for taking the time to reply.
Thanks,
Jamshed Mulla

Itunes 11 update; entercounted a problem and needs to close

Itunes has encountered a problem and needs to close , After I Uninstall everything containing apple & did the window ulitly than downloaded itunes again & It still said this. I have unistalled , clean up , & download again & again and this keeps popping up. Im getting very upset with this , can someone help me. It Says
"iTunes has encountered a problem and needs to close. we are sorry for the inconveince. - If you were in the middle of something, the information you were working on might be lost . - Please tell Microsoft about this problem. We have created an error report that you can send to us . We will treat this report as confidential and anonymous"
Someone help me please!

edit...

LiveCam.exe has encountered a problem and needs to close. Constant Error. HELP PLEASE

Alright so basically, my parents got a buy-one-get-one-free offer on webcams at christmas, and so they gave me one for my own as i lost my old one. Everything was working fine, seemed like a great camera.
However, randomly one evening when i tried to open Live! Cam Center to record a video, it refused to open, instead giving me a small white box with the loading symbol inside (thats where live! cam center usually opens out into the UI) and a boz saying "LiveCam.exe has encountered a problem and needs to close. We are sorry for the inconvenience.".
Now i thought that it was just a random one-off thing, but it happens EVERY time, WITHOUT fail. The cam works fine on MSN and skype etc, just when i try to record anything or manually take pictures , cam center doesn't work. And it doesn't seem to just be cam center, almost every software i've tried for just plain recording/capturing failed.
Tried updating to latest drivers and software, tried using older versions, tried using the cam from my family pc (identical cam) - failed, tried using all different USB ports randomly, failed. I'm really desperate here now, i'm at the point where i'm almost going to give it away and buy a non-creative webcam cos its really annoying.
My webcam is the Live! Cam Video IM Pro. Here's a copy of the error report from windows, its the same every time:
AppName: livecam.exe AppVer: 2.2.3.0 ModName: ctvidcap2.dll
ModVer: 2.2.3.0 Offset: 00002ca
PLEASE HELP! IM DESPERATE >_

See if there are any Crash Reports ID's saved.
Type '''about:crashes''' in the Location Bar and hit Enter.
Then open each Crash Report and once the report is loaded completely, copy and paste the URL of each report into the the '''''Post as Reply''''' box in this thread.
IMO, seeing that you are using WinXP, you might be better off with the older Flash 10.3.183.90 version. Flash 11.0 and later have "improvements" that don't work on WinXP - only Vista and later. Adobe did continue to support and provide security updates for Flash 10.3 until a few months before WinXP went EOL back in April of this year.

QuickTime Player has encountered a problem and needs to close. [error]

*Error message:*
QuickTime Player has encountered a problem and needs to close. We are sorry for the inconvenience.
*Error signature:*
EventType : BEX P1 : QuickTimePlayer.exe P2 : 7.60.92.0
P3 : 496279cc P4 : QuickTimePlayer.exe P5 : 7.60.92.0 P6 : 496279cc
P7 : 0000130d P8 : c0000409 P9 : 00000000
*Error report content:*
C:\DOCUME~1\MyUserID\LOCALS~1\Temp\WER1cc6.dir00\QuickTimePlayer.exe.mdmp
C:\DOCUME~1\MyUserID\LOCALS~1\Temp\WER1cc6.dir00\appcompat.txt
This problem is same as reported here and hasn't been solved:
http://discussions.apple.com/thread.jspa?threadID=1370493&tstart=1397
I have seen this problem appearing on Windows 2000, XP SP2 and XP SP3 with all QuickTime 7 versions (can't tell about iTunes since I don't use it), it didn't bother me because I have no use for QT/MOV myself.
but.
I have just installed your latest QT Player 7.60.92 and it craps out with the same error whenever I want to open .mov files.
And I have downloaded few trailers ranging from small resolution up to highest "HD" resolution from your own Apple website to make sure it is not some encoding compatibility issue.
I know it is a bug in QT Player itself, so don't tell me please that "my QT got fragmented" or such BS (like the replies suggested in the other thread) or ask about any QT alternative corrupting "official" QT Player since I have no such thing. I am trying to make it work on my mother's computer with freshly installed WinXP (prior updated up to latest patches), machine has standard 32bit intel single core CPU (2.8GHz, 2GB of RDRAM).
I am really sorry I bought her camera that take those stupid .mov QT videos.
Apple folks, what's the catch?
With every crash it creates in user temp directory files like:
QuickTimePlayer (2009-03-15 16.06.49).dmp
+ folder like WERf743.dir00 with files inside:
appcompat.txt
manifest.txt
QuickTimePlayer.exe.hdmp
QuickTimePlayer.exe.mdmp
appcompat:
Well, too big to post here (~190kB of text) and anyways it just lists files/versions from what I've seen, so its probably irrevelant
manifest:
Server=watson.microsoft.com
UI LCID=1033
Flags=1674066
Brand=WINDOWS
TitleName=QuickTime Player
DigPidRegPath=HKLM\Software\Microsoft\Windows NT\CurrentVersion\DigitalProductId
ErrorText=If you were in the middle of something, the information you were working on might be lost.
Stage1URL=
Stage1URL=/StageOne/Generic/BEX/QuickTimePlayerexe/7_60_92_0/496279cc/QuickTimePlayer_exe/7_60_920/496279cc/0000130d/c0000409/00000000.htm
Stage2URL=
Stage2URL=/dw/GenericTwo.ASP?EventType=BEX&P1=QuickTimePlayer.exe&P2=7.60.92.0&P 3=496279cc&P4=QuickTimePlayer.exe&P5=7.60.92.0&P6=496279cc&P7=0000130d&P8=c00004 09&P9=00000000
DataFiles=C:\DOCUME~1\My-User-ID-here\LOCALS~1\Temp\WERf743.dir00\QuickTimePlaye r.exe.mdmp|C:\DOCUME~1\My-User-ID-here\LOCALS~1\Temp\WERf743.dir00\appcompat.txt
Heap=C:\DOCUME~1\My-User-ID-here\LOCALS~1\Temp\WERf743.dir00\QuickTimePlayer.exe .hdmp
ErrorSubPath=Generic\BEX\QuickTimePlayer.exe\7.60.92.0\496279cc\QuickTimePlayer. exe\7.60.92.0\496279cc\0000130d\c0000409\00000000
DirectoryDelete=C:\DOCUME~1\My-User-ID-here\LOCALS~1\Temp\WERf743.dir00
/edit
Yes, same as in the other thread from year ago, the QT/.mov files play fine in the browsers (I have just check on IE7, Firefox, K-Meleon).
Message was edited by: -888-

Look, I had it running _few times_ too until it crapped out and gives the error since (on my own other computers - which I don't care since I have no use for any QT/.mov myself, but I repeat from post 1: I need it working on my Mother's comp).
And talking about 'bad drivers' - yes, I know that the drivers are sometimes at fault and bad drivers can make entire windoze pc unstable or crash; but how can you suggest this as a cause in this case when I'm telling you that the same error appears on completely different machines? And wouldn't this error appear from begining, from very first use of QT Player if it were bad drivers? Sure it would if it was faulty driver, but since it didn't that's not the case obviously.
Another pointer that it is NOT drivers related problem is that all other audio-video programs work fine, without errors and problem-free on the same machines, including playback of some of the .mov files with Media Player Classic or VLC - while they crap out with QT Player. If it was any of the drivers for audio or video, directx acceleration, etc - the faulty driver(s) should and would affect other programs as well. Yet all of them work fine and as I said - some even play QT files too (the ones capable of).
/edit:
Just to test it I "caved in" and I have installed entire iTunes 8.0 garbage (as suggested by foobula earlier) since I couldn't get just QTPlayer part of it to install separately, and what do you know:
LO & BEHOLD! same .mov files play fine with QT7, no errors, no problem! (I have opened/closed same .mov files many times).
Then I uninstalled iTunes and all of its junk,
removed any traces of it (because it left out - in a Microsft style - plenty of garbage in registry, user appdata folder etc),
rebooted,
installed the "standalone" QT Player 7.60
and hello Apple my darling! - same error is back after just 2 playbacks of very same .mov files!
(I used Apple's own .mov trailers for testing just to make sure I have "right" quicktime files:
http://movies.apple.com/movies/weinstein/inglouriousbasterds/inglouriousbasterds -tlr2_1080p.mov
and
http://movies.apple.com/movies/weinstein/inglouriousbasterds/inglouriousbasterds -tlr2_480p.mov
- and I repeat: both played once each fine (haven't play till the end though, but I'm sure that doesn't matter since the problem appears from the start)
What better proof you need that the problem is only with QT Player in a "standalone edition" (or whatever Apple calls it) and not with any drivers etc?
As previously, both play fine when links opened in a browsers (so the QuickTime whatever-components responsible for audio and video rendering WORK FINE and its not any "bad drivers" problems, it is just QT Player application's problem)
Again: (I hate to repeat myself)
*I don't want any itunes or other junk,*
*I just want .mov files to open with quicktime player - no more or less.*
Message was edited by: -888-

AS 10gR1 vs "Apache.exe has encountered a problem and needs to close" on XP

I would really appreciate if somebody has solution for Windows error message popup box
"Apache.exe has encountered a problem and needs to close".
I have installed Oracle Application Server 9.0.4 Infrastructure (from 10gR1 AS) on XP laptop (I know it is unsupported)
opmnctl.exe status show "UP" status for OID,OC4J but "Down" for HTTP_Server
When I try to run
opmnctl.exe versbose startproc ias_component=HTTP_Server
I will always get "result=failure", text="failed to start a managed process after the maximum retry limit"
and Windows message popup box
"Apache.exe has encountered a problem and needs to close".
(I have also 9i and 10g installed in separate Oracle homes).

I have made 3rd attempt to re-install AS due "Apache.exe has encountere..and must be closed" error.
I have succeeded after doing following:
- unistall previous AS 9.0.4 (10gR1) install
- disabled McAffee and firewall
- changing NLS_LANG=AMERICA_AMERICAN.WE8ISO8859P15 prior installation
- removed path to other OH (9i and 10gR2)
- restart XP laptop
- doing install AS 9.0.4 (10gR1)
Now opmnctl.exe status shows everything works (including HTTP_Server :)

Indesign.exe has encountered a problem and needs to close.

After formatting my hard drive and reinstalling InDesign CS3, I am not able to open the program.
When I click the shortcut to start the program, it starts to load for about 10-15 seconds, then freezes and gives me this error message:
"Indesign.exe has encountered a problem and needs to close."
I tried reinstalling over the first installation. Then I downloaded the latest updates (Ver. 5.0.4)
Then I rebooted the computer. Same problem. Rebooted two more times. Same problem.
Uninstalled the program. Reinstalled. Rebooted. Same error msg. Installed update to Ver 5.9.4, same error msg.
Rebooted again, same error msg.
What's next? I am at a loss.
Thank you

Ok, I did the following with no luck yet...
Deleted fonts that had been dragged into the Windows Fonts folder.
Searched for adobefnt*.lst, found 6 files, deleted them.
Uninstalled InDesign again.
Downloaded CleanScript.
Did CleanScript Method 1 as described in ReadMe file:
    Uninstalled InDesign
    Went to documents and settings\username\application data\adobe\patchlogs
    deleted adobeInDesignCS35.0.log
    deleted adobeSingCS3 0.1.log
    deleted adobeLinguistics CS3 3.0.0.log
    Went to documents and settings\username\local settings\application data\adobe
    Looked for files to delete with CS3 in the name, but did not see any.
    Installed InDesign
    Rebooted
    Would not start
Did CleanScript Method 2 (same as you suggested)
    Uninstalled InDesign
    Ran Clean Script
    Reboot
    Run MSconfig
    turned off everything not marked as "essential"
    reboot
    Tried to install ID
    Error Msg: Windows Installer Service needs to be running
    Ran MS config/ enabled Installer service
    reboot
    Installed ID
    Tried to start it, would not start, got this error msg:
          Licensing for this product has stopped working. You cannot use this prodict at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT...
    Started MSconfig/ enabled all the old services
    reboot
    Tried to start ID, got same Licensing error msg
    Reinstalled ID on top of the old installation
    Tried to start ID
    Got the OLD error msg
         InDesign.exe has encountered a problem and needs to close.

ITunes 10.2.1 "encountered a problem and needs to close"

Just about ready to cease using iTunes permanently.
I have installed the latest version of iTunes - 10.2.1.1. It will not open at all, instead giving me an error message reading "iTunes has encountered a problem and needs to close". I have spent a week trying to fix it and done the following:
1. Complete uninstall as per Apple website instructions - iTunes, QuickTime, Bonjour, App Support, App Updates, etc as well as cleaning the System 32 folder
2. manual install direct from file as opposed to using the updater
3. I have uninstalled every codec I have on the PC, there are no conflicts
4. Have run registry cleaners, virus scans, etc.
5. QuickTime launches as per usual, no problems - its definitely iTunes.
NOTHING works. I now have no access to iTunes, my library, cannot update my iPhone, iPod or anything else. Please help

I'm having the same issue. Ever since the update, iTunes has failed to open for me. I have uninstalled and reinstalled every way to think of. I reinstalled iTunes 4 and it worked, sadly. I then went to update again, and iTunes fails to open. Quicktime works fine. All other programs work fine. This is definately due to the new iTunes version that was released. I get the unexpected error message and it closes. This is the error signature I receive:
AppName: itunes.exe
AppVer: 10.2.1.1
ModName: dnssd.dll
ModVer: 2.0.4.0
Offset: 0000246c
Can anyone help me out? I have tried everything on Apple's site, and nothing works to fix the problem.

Reports Builder has encountered a problem and needs to close.

Hi All,
The report builder in my system is behaving weirdly. If I open a report, which is having a normal browser output, it allowing me to see the data model, layout model and everything. And if I open a report, which is having a PDF output, it's not allowing me to open the Layout.
Here the output is in context of Oracle Applications front-end. And as I know it shouldn't be a problem with Report Builder.
It errors out with the following message.
Reports Builder has encountered a problem and needs to close. We are sorry for the inconvenience.
And the error report contains the following message.
AppName: rwbld60.exe     AppVer: 3.0.0.0     ModName: mmc60.dll
ModVer: 0.0.0.0     Offset: 0000c533
Here is the version information:
Report Builder 6.0.8.11.3
ORACLE Server Release 8.0.6.0.0
Oracle Procedure Builder 6.0.8.11.0
Oracle ORACLE PL/SQL V8.0.6.0.0 - Production
Oracle CORE Version 4.0.6.0.0 - Production
Oracle Tools Integration Services 6.0.8.10.2
Oracle Tools Common Area 6.0.5.32.1
Oracle Toolkit 2 for Windows 32-bit platforms 6.0.5.35.0
Resource Object Store 6.0.5.0.1
Oracle Help 6.0.5.35.0
Oracle Sqlmgr 6.0.8.11.3
Oracle Query Builder 6.0.7.0.0 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle ZRC 6.0.8.11.3
Oracle Express 6.0.8.3.5
Oracle XML Parser     1.0.2.1.0     Production
Oracle Virtual Graphics System 6.0.5.35.0
Oracle Image 6.0.5.34.0
Oracle Multimedia Widget 6.0.5.34.0
Oracle Tools GUI Utilities 6.0.5.35.0
I have tried reinstalling the software a minimum of 10 times, but no luck. At last I got my system formatted and tried. For the first time it worked for me, then I installed Forms Builder... then again I am getting the same problem even though I have different homes for Reports and Forms.
Is it problem with my system or the Operating System or the version of the Oracle Developer?
Can anyone please help me out?
Thanks in advance,
Lakshman.

I have been having a similar problem and do not know if this will apply to your situation but I found the following on Metalink.
Subject:      Reports Builder Crashes Opening the Paper Layout on Large Reports on XP/2003
     Doc ID:
Note:566304.1     Type:      PROBLEM
     Last Revision Date:      18-AUG-2008     Status:      PUBLISHED
In this Document
Symptoms
Changes
Cause
Solution
References
Applies to:
Oracle Reports Developer - Version: 10.1.2.0.2 to 10.1.2.3
Microsoft Windows XP
Microsoft Windows Server 2003
Symptoms
Oracle Reports Builder crashes opening the Paper Layout on some large reports but ONLY on the following platforms:
     Microsoft Windows XP Professional
     Microsoft Windows Server 2003
Reports Builder displays the below message and then crashes:
Reports Builder
Reports Builder has encountered a problem and needs to close. We are sorry for the inconvenience.
If you were in the middle of something, the information you were working on might be lost.
Please tell Microsoft about this problem.
We have created an error report that you can send to us. We will treat this report as confidential and anonymous.
To see what data this error report contains, click here.
[Send Error Report] [Don't Send]
--> click on [Don't Send] button and Report Builder disappears.
-and/or-
access violation in oranls10.dll
This problem does not reproduce on:
     Microsoft Windows 2000
The solutions in the below note do not work on v. 10.1.2.2.0 and 10.1.2.3.0:
Note 361206.1 Title: Reports Builder Crashes Opening a Paper Layout on Windows XP Only
Changes
Upgraded to Oracle Report Builder v. 10.1.2.x.x from a previous release.
Cause
Bug 7014048 is fixed in one-off Patch 5335195 (Base Bug) but missed inclusion (ie. was not ported to) in latest Developer patchset v. 10.1.2.3.0
See also:
Bug 7014048 Abstract: REPORTS BUILDER CRASHES OPENING A PAPER LAYOUT.
Bug 5029530 Abstract: REPORTS BUILDER CRASHES OPENING PAPER LAYOUT MODEL ONLY ON XP BOX
Solution
To implement the solution, please execute the following steps:
1. Download one-off Patch 5335195 for v. 10.1.2.0.2 to the XP/2003 box.
2. Back up existing uiw.dll for 10.1.2.3 880KB 10/10/2006 7:23PM --> uiw_orig_10.1.2.3.zip
3. In the %ORACLE_HOME%\bin directory, replace uiw.dll (880KB) with the uiw.dll (1,316KB) from
Patch 5335195 --> 1,316KB 7/24/06 11:12PM
4. Re-launch Report Builder 10.1.2.3.0 on XP/2003.
5. Open the <large report>.rdf.
6. Double-click on the Paper Layout icon.
7. The result should be: Successfully open the Paper Layout for <large report>.rdf.
References
Bug 5029530 - REPORTS BUILDER CRASHES OPENING PAPER LAYOUT MODEL ONLY ON XP BOX
Bug 7014048 - REPORTS BUILDER CRASHES OPENING A PAPER LAYOUT.
Note 361206.1 - Reports Builder Crashes Opening a Paper Layout on Windows XP Only
Patch 5335195 - REPORTS BUILDER CRASHES OPENING PAPER LAYOUT MODEL DUE TO ACCESS

IPodService Module has encountered a problem and needs to close

After allowing Windows XP to install Service Pack 3, I started getting the error message "iPodService Module has encountered a problem and needs to close" whenever I plugged my iPod 60 Gb into my PC. I spent months, literally, reading and asking and trying things before stumbling onto a fix that worked. I got the hint from a thread in some forum, then verified it with the software manufacturers. Apparently, Windows XP SP3 writes a bunch of garbage entries into your registry, and in the process corrupts some of the existing entries (thanks a lot, Microsoft, I mean really, thanks just too much. That service pack was soooo helpful). Included in the corrupted entries are a LOT of the ones used by Norton Antivirus 2008. This causes Norton to somehow prevent the device manager from recognizing anything (device manager window comes up blank) and apparently also causes iTunes to be unable to recognize the iPod. Here is the fix I used (a hybrid of several sets of instructions from various sources, including Symantec). I don't know if every step is crucial, I just know it worked.
1) Uninstall Norton Antivirus 2008
2) Use the registry editor (Run: regedit) to locate and delete every line beginning with the string $%&'( BE CAREFUL-don't delete or change anything else !
3) Reinstall Norton Antivirus 2008 and update it using Live Update
4) Uninstall iTunes
5) Download and install latest version of iTunes from Apple
6) Connect iPod (iTunes recognized it at this point)
7) Use iTunes to update iPod software
I read a lot of posts from a lot of frustrated people experiencing this or similar problems. I hope this helps at least some of them.

Hey everyone... been watching these threads closely because, I too have this issue.
One question though... what if you don't use Norton??? I can't possibly believe that everyone with this issue uses Norton... I use AVG. When I search my registry, I get no results.
Does anyone have any input? Everything I read mentions Norton. This problem seems to have gone on forever, I can't believe it hasn't been solved eith by Apple, Microsoft or both.

Getting "HPNetworkCommunicator.exe has encountered a problem an needs to close" message

I have an HP Photosmart B210e, product number CN219A. I am running Windows XP 32 bit and I am using a wireless connection to print. The problem is occuring on an HP Compaq 8510p laptop.
I have been using the printer for several months and it has worked great but about a week ago, I started getting an error message. The first time I try to use the printer after turning on the computer I get a message saying "HPNetworkCommunicator.exe has encountered a problem and needs to close". I am unable to print from that point forward. Documents that I attempt to print just sit in the qeue. However, if I shut the computer down and restart it, the print jobs will print on their own as soon as the computer boots up. But then if I try to print another document I get the same error message and am unable to print. Once I get the error message I am unable to use the HP software to check ink levels or communicate with the printer in any way.
I have attempted reinstalling the driver and software 2 times without any success. I have run the HP print diagnostic utility and it tells me that "everything checks out okay with your printer" and asks me if I want to print a test page. I try to print the test page and it is unable to print it.
I have the printer installed on another computer running windows 7 and it still works great.
Please let me know how I can fix this problem
I am unaware of any changes made to my computer other than the automatic windows and Mcafee updates.

I have exactly the same problems. If you com up with an answer before I do please reply here. I'll do the same.

Problem: Everything needs rendering

Similar Messages

Maybe you are looking for