Problem executing a report in the Business Explorer

Hi people,
I'm trying to execute a report with the transaction RRMX in BW but when I execute it in the business explorer I receive this error:
internal error Problem when writing table: C_T_VARIABLES
Abort system error in program SAPLRRK0 and form NODE_AUTORITY_FILL_2
Someone have an idea of the problem?
Thanks a lot!

Hi
Is it for all your reports ?
If it is for one, what does it do ?
Do you have the customer exit activated and filled in ?
PY

Similar Messages

Federating the Business explorer role

Recently we have successfully federated some reports for some business users. Now another business group is interested in federating the Business explorer role. They would like to take advantage of the BexWebanayzer iview and a few of its features. They want the ability to personalize (change the columns and filteringu2026) a report and save it in their personal Portfolio area in KM on the producer. I'm having some issues federating that iview and the business explorer role. Is anyone aware of any other SAP users that have federated the Business explorer role?
Along with federating the role the users would like to hide 2 of the tabs within the popup iview of the "save as" in the BexWebAnalyzer iview . I don't know if this is even possible to modify the popup and I can't seem to find that popup object/iview.
Thanks, any info is appreciated.
Jim

Hey @ All,
how did you install the EP? What kind of Usagetype did you select?
To have the BI content installed to the EP you need to install the BI usagetype as well. So in SAPinstaller you have to check the marks properly.
If you have installed only the EP usagetype you are able to reinstall the BI usagetype afterwards. As far as I know you can start the SAPinstaller again and set the right checkmarks.
The BI (usagetype) content needs a WEBAS Java and EP installed.
Hope this explanation helped a little... if so points are very welcome since i am starting from scratch!
kind regards
Tobi

Currency conversion in the Business Explorer(Query design)

Hi Experts,
How to convert currencies from CAD to USD using the Current exchange rate 0011 for a particular record in the Business Explorer (Query Design).
Any useful answer will be rewarded with suitable points.
Thanks!
Rohan

Create a currency coversion type for the exchange rate
Go to RRC1, enter a name for your new currency conversion type
on the exchange rate tab mark the radio button Exchange Rate Type.
enter the exchange rate type there
enter the target curr in the tar curr tab as USD
similarly in the query also enter the curr conversion key.
hope it helps,
assign points if useful

Define the Version of Excel starting over the Business Explorer

Hello,
we are running SAP BI 2004s. On my computer are two versions of Excel installed. Excel 2003 and Excel 2007. Actually over the Business Explorer I can only start Excel 2003. Is there a possibility to change this adjustment without deinstalling one version of Excel? I need both versions because of tests.
Many thanks!

Jörg,
another way of starting BEx analyzer is by running the XLA file directly out of Excel. Open up the 2003 version, and start this file (this is the default location):
"c:Program FilesSAPFrontEndBwBExAnalyzer.xla"
BTW - I use both versions of excel (2003 and 2007) with BEx, and both are running fine. Beware that you cannot save workbooks in xlsx format (new Excel 2007 open XML format) and then save them in the system yet (will be fixed in the upcoming support stack I believe). For that reason, I typically would save the workbook by using Office 2003, and then when I return to it, I can use either 2003 or 2007
good luck
Pasha

How to create a Custom Screen for executing a report in the backend ?

Hello Everyone,
I have a requirement to develop a Custom Application on the Cloud to capture few fields from user and trigger an execution of a report in the background in CRM. There is no need to display any results after the triggering execution. Just need to show a message that "Background Job was successfully submitted".
I saw the types of screens available for creation as explained in this link Screen Types, unfortunately none of the screen types works out for me.
As seen from the requirement, there is no need to store any data send from the UI in backend. So, it doesn't make sense for me to create a Business Object. So I tried creating a Query Object to see if that works out, but query object also requires a BO to execute query on and it also makes result list view mandatory and asks me to pick atleast one field to show in the result list.
I also tried Mass Data run which doesn't fit the bill.
So, I'm looking for the best possible UI screen and approach to build a simple custom application with 5-6 fields and an execute button. Please suggest me the best possible option available in the C4C.
Regards,
Srikanth

Hey,
first of all: if you really need a button, you will need to create your own business object with an action.
If you just want to trigger the service you could add an extension field of type indicator to any standard Bo and the put logic in the before save of this Xbo. Then you just add the indicator to the UI. But the user would always have to go to this screen I.e. The customer...
so i guess maybe a custom business object with only one instance, a button, some logic in an action and a generated UI including a workcenters 'backend report execution' is the best way for you!
cheers
jens

How do we embed Crystal Reports in the Business suite?

Hi all,
Actually the question is:
With the new embedded Analytics, is it supposed to allow us to embedded other CRs into teh ERP System or is it not supposed to be part of the integration (and then we need to use the opendocument feature)?
I can see that we have business content created with CR and XC in the business suite now, but not sure if we have developed a mechanism to call other Reports from the BI platform (BOE).
Thanks all in advance,
Antonio
Edited by: Antonio Alvarez on Jan 23, 2011 5:20 PM

Hi Ingo,
Thanks for the quick reply, I knew about the Opendocument functionality, is there anything else that integrates CRs into the ERP systems natively and that is related to the embedded analytics?
Thanks in advance,
antonio

Executing the report from the form

I am getting the following error while executing a report from the form, and the destination format is excel
RWRBE60.exe - Application Error
The exception unknown software exception (0xc00000fd) occurred in the application at location 0x64aa591a.
Click on OK to terminate the program
Click on CANCEL to debug the program
OK Cancel

im having same problem when i use long report file names. like when i use report name my_very_long_long_report_name.rep this problem occurs..
i reduced this to my_short_report_name.rep it never occurs, it happend in lot of reports.
Regards

Time Out error problem when i run the report for the whole plant

Dear all,
pls find the below coding, when i execute this report for the whole plant , it gives me time out error since it has to process huge database. pls suggest me in which part of my below coding i can improvise or any other better way to fetch the same result.
pls note that
i m using Views for querying.pls also note the comments given in Bold to understand the reason behind the coding.
Views used in are - ZVPOD and ZVPRDCONF.
START-OF-SELECTION.
Data: zstat type jest-stat.
data: stklocaf type mska-lgort.
data: stklocas type mska-lgort.
To collect the status of the production order by joining the ZVPOD and JEST table.
CLEAR it_ZVPRODDET.
SELECT DISTINCT ZVPOD~bukrs ZVPOD~aufnr ZVPOD~objnr
jest~stat ZVPOD~werks ZVPOD~arbpl ZVPOD~J_3AKORD2
FROM ZVPOD
INNER JOIN jest ON ZVPOD~objnr = jest~objnr
INTO CORRESPONDING FIELDS OF wa_ZVPRODDET where
plnbez in FGM and arbpl in wc and werks in plant
and SSAVD in eldate
and J_3AKORD2 in cups and jest~inact ne 'X'.
 APPEND wa_ZVPRODDET TO it_ZVPRODDET.
ENDSELECT.
SORT it_ZVPRODDET BY aufnr stat.
Loop thru Itab to check and delete the records from itab for the specified status.
LOOP AT it_ZVPRODDET INTO wa_ZVPRODDET.
 IF wa_ZVPRODDET-stat = 'I0045' . " TECO - compl
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
 ELSEIF wa_ZVPRODDET-stat = 'I0009' . " CNF - Confirmed
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
 ELSEIF wa_ZVPRODDET-stat = 'I0012' . " DLV - Delivered
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
 ELSEIF wa_ZVPRODDET-stat = 'I0046' . " CLSD - Closed
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
 ELSEIF wa_ZVPRODDET-stat = 'I0076' . " DLFL - Del Flag
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
 ELSEIF wa_ZVPRODDET-stat = 'E0003' . " SCLS - Short Close
 CLEAR tj30t.
 SELECT SINGLE txt04
 FROM tj30t INTO tj30t-txt04
 WHERE stsma = 'PRDHOLD' AND
 estat = 'E0003' AND
 txt04 = 'SCLS' AND
 spras = 'EN'.
 IF sy-subrc = 0.
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
 ENDIF.
 ENDIF.
* Condition for Prod Order released - REL
 IF wa_ZVPRODDET-stat = 'I0002'.
 mreleased = 'Y'.
 else.
 mreleased = 'N'.
 endif.
 zstat = wa_ZVPRODDET-stat.
 IF mreleased = 'N'.
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr
 and stat = zstat.
 ENDIF.
ENDLOOP.
Loop thru the filtered ITAB to get all the production order details for the production order number specified in the where clause( zaufnr ) and populate another internal table.
 LOOP AT it_ZVPRODDET INTO wa_ZVPRODDET.
 zaufnr = wa_zvproddet-aufnr.
 zarbid = wa_zvproddet-arbid.
 at new aufnr.
 SELECT DISTINCT * INTO CORRESPONDING FIELDS OF walnpln
 FROM zvpod where plnbez in FGM and arbpl in wc and SSAVD in
 eldate and werks in plant and J_3AKORD2 in cups and aufnr = zaufnr.
 APPEND walnpln TO itablnpln.
 endselect.
 endat.
 endloop.
 clear walnpln.

Looping thru Internal table and performs all the following calculations and inner loop
and also relevant querying.
Assume that ITABLNPLN holds appox. 8000 records.
LOOP AT itablnpln INTO walnpln.
 contot = 0.
 SELECT distinct * INTO CORRESPONDING FIELDS OF TABLE itablnp
 FROM zvprdconf where aufnr = walnpln-aufnr and
 j_3asize = walnpln-j_3akordx and stzhl ne '2' and stokz ne 'X'.
 clear zvprdconf.
 SELECT single isdd
 FROM zvprdconf into zvprdconf-isdd
 where aufnr = walnpln-aufnr and
 j_3asize = walnpln-j_3akordx and stzhl ne '2' and stokz ne 'X'.
 SELECT single isdz
 FROM zvprdconf into zvprdconf-isdz
 where aufnr = walnpln-aufnr and
 j_3asize = walnpln-j_3akordx and stzhl ne '2' and stokz ne 'X'.
 IF sy-subrc EQ 0.
 Assume that ITABLNP holds appox. 30 records.
 loop at itablnp into walnp.
 contot = contot + walnp-J_3ALMNGA.
 move walnp-J_3ASIZE to walnpln-J_3ASIZE.
 move zvprdconf-isdd to walnpln-zdate.
 move zvprdconf-isdz to walnpln-ztime.
 endloop.
 walnpln-output = contot.
 endif.
 walnpln-wip = walnpln-menge - contot.
 if walnpln-werks = '1000'.
 stklocaf = '1050'.
 stklocas = '1060'.
 elseif walnpln-werks = '2000'.
 stklocaf = '2150'.
 stklocas = '2160'.
 endif.
 select single kunnr into walnpln-ship from vbpa where
 vbeln = walnpln-KDAUF and PARVW = 'WE'.
 zship = walnpln-ship.
 move zship to walnpln-ship.
 select single kalab into walnpln-zactqty from mska
 where matnr = walnpln-plnbez
 and j_3asize = walnpln-J_3AKORDX and LGORT = stklocaf.
 condense walnpln-kdauf.
 zsales = walnpln-kdauf.
 concatenate zsales 'S' into zso.
 select single kalab into walnpln-zsndqty from mska
 where matnr = walnpln-plnbez
 and j_3asize = walnpln-J_3AKORDX and LGORT = stklocas
 and J_4KSCAT = zso.
 zmatn = walnpln-plnbez.
 zsale = walnpln-KDAUF.
 walnpln-kdauf = zsale.
 walnpln-plnbez = zmatn.
 zcust = walnpln-kunnr.
 walnpln-kunnr = zcust.
 select single bezei into walnpln-season from TVV2T where
 kvgr2 = walnpln-kvgr2 and SPRAS = 'E'.
 select single bezei into walnpln-shipmode from T173T where
 vsart = walnpln-vsart and SPRAS = 'E'.
 STRL = strlen( walnpln-j_3akord2 ).
 if strl = 4.
 move walnpln-j_3akord2 to walnpln-j_3akord3.
 clear walnpln-j_3akord2.
 endif.
 move zremk to walnpln-remk.
 MODIFY itablnpln FROM walnpln.
 contot = 0.
 clear itablnp.
 ENDLOOP.
 PERFORM build_fieldcatalog.
 PERFORM build_layout.
 PERFORM display_alv_report.

Hi raja,
Plese go through the suggessitions.
1.avoide the select ...endselect. write the below select
CLEAR IT_ZVPRODDET.
SELECT DISTINCT
 ZVPOD~BUKRS
 ZVPOD~AUFNR
 ZVPOD~OBJNR
 JEST~STAT
 ZVPOD~WERKS
 ZVPOD~ARBPL
 ZVPOD~J_3AKORD2
FROM ZVPOD
INNER JOIN JEST ON ZVPOD~OBJNR = JEST~OBJNR
INTO CORRESPONDING FIELDS TABLE IT_ZVPRODDET
WHERE PLNBEZ IN FGM AND
 ARBPL IN WC AND
 WERKS IN PLANT AND
 SSAVD IN ELDATE AND
 J_3AKORD2 IN CUPS AND
 JEST~INACT NE 'X'.
IF SY-SUBRC = 0.
 SORT TABLE IT_ZVPRODDET.
ENDIF.
2..first of all dont delete a record inside the loop. instead use the Field symobols.
have u obsereved you code in the loop!!!!. wht u r doing..
u r removing the same record which u in the loop..
If u wanto delete the entires with check to stat... then.. why dont u put the STAT field in Wher e condition..? by this you reduce the data base select time..
Now the select query is like the below....
CLEAR IT_ZVPRODDET.
SELECT DISTINCT
 ZVPOD~BUKRS
 ZVPOD~AUFNR
 ZVPOD~OBJNR
 JEST~STAT
 ZVPOD~WERKS
 ZVPOD~ARBPL
 ZVPOD~J_3AKORD2
FROM ZVPOD
INNER JOIN JEST ON ZVPOD~OBJNR = JEST~OBJNR
INTO CORRESPONDING FIELDS TABLE IT_ZVPRODDET
WHERE PLNBEZ IN FGM AND
 ARBPL IN WC AND
 WERKS IN PLANT AND
 SSAVD IN ELDATE AND
 J_3AKORD2 IN CUPS AND
 JEST~INACT NE 'X' AND
 ( STAT <> 'I0045' AND
 STAT <> 'I0045' AND
 STAT <> 'I0009' AND
 STAT <> 'I0012' AND
 STAT <> 'I0046' AND
 STAT <> 'I0076' AND
 STAT <> 'E0003' ).
IF SY-SUBRC = 0.
 SORT TABLE IT_ZVPRODDET.
ENDIF.
3. WHT IS MEANING OF THE SELECT
 CLEAR TJ30T.
SELECT SINGLE TXT04
FROM TJ30T INTO TJ30T-TXT04
WHERE STSMA = 'PRDHOLD' AND
 ESTAT = 'E0003' AND
 TXT04 = 'SCLS' AND
 SPRAS = 'EN'.
IF SY-SUBRC = 0.
 DELETE IT_ZVPRODDET WHERE AUFNR = WA_ZVPRODDET-AUFNR.
ENDIF........ IN WHERE CONDION U R GIven all are constant values right?..
why u need select it inside the loop.. u can write before the SELECT from ZVPOD..
that why first checke this field then go for fur thure selects..
now u r code looks like this....
CLEAR TJ30T.
SELECT SINGLE TXT04
FROM TJ30T INTO TJ30T-TXT04
WHERE STSMA = 'PRDHOLD' AND
 ESTAT = 'E0003' AND
 TXT04 = 'SCLS' AND
 SPRAS = 'EN'.
IF SY-SUBRC = 0.
CLEAR IT_ZVPRODDET.
SELECT DISTINCT
 ZVPOD~BUKRS
 ZVPOD~AUFNR
 ZVPOD~OBJNR
 JEST~STAT
 ZVPOD~WERKS
 ZVPOD~ARBPL
 ZVPOD~J_3AKORD2
 FROM ZVPOD
 INNER JOIN JEST ON ZVPOD~OBJNR = JEST~OBJNR
 INTO CORRESPONDING FIELDS TABLE IT_ZVPRODDET
 WHERE PLNBEZ IN FGM AND
 ARBPL IN WC AND
 WERKS IN PLANT AND
 SSAVD IN ELDATE AND
 J_3AKORD2 IN CUPS AND
 JEST~INACT NE 'X' AND
 JEST~STAT <> 'I0045' AND
 JEST~STAT <> 'I0045' AND
 JEST~STAT <> 'I0009' AND
 JEST~STAT <> 'I0012' AND
 JEST~STAT <> 'I0046' AND
 JEST~STAT <> 'I0076' AND
 JEST~STAT <> 'E0003' ).
 IF SY-SUBRC = 0.
 SORT TABLE IT_ZVPRODDET.
 ENDIF.
ENDIF.
there are so many select inside the loop...... please Delete all of them.... write them be for the loop.......using the FOR ALL ENTRIES.....
THEN LOOP THE TABLE USING THE WHERE CONDITIONS.
Plese write u updated code here again..

When i try to execute a report from forms10g i found the errore id not ....

i have a button in a form that run on forms10g that tri to execute a report in the web :
the trigger is this
**** when i try to execute the button the error is that the is impossibile to find the "report ID"???
there is a easist solution to execute a report from a form button ????
thank's !
DECLARE
report_id Report_Object;
BEGIN
report_id:= find_report_object('imm_print_01');
PROCEDURE RUN_REPORT_OBJECT_LIST(report_id , 'repSRV' , 'pdf');
END;
the procedure run_report_object_list is the follow :
PROCEDURE RUN_REPORT_OBJECT_LIST(report_id REPORT_OBJECT, reportserver
varchar2,
runformat varchar2) IS
report_job_id VARCHAR2(100);
vc_rep_status VARCHAR2(20);
paramlist_id ParamList;
paramlist_name VARCHAR2(10):=âtmplistâ;
BEGIN
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,
SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,
reportserver);
paramlist_id:= get_parameter_list(paramlist_name);
IF NOT id_null(paramlist_id) THEN
destroy_parameter_list(paramlist_id);
END IF;
paramlist_id:=create_parameter_list(paramlist_name);
add_parameter(paramlist_id,âDESTYPEâ,TEXT_PARAMETER,âCACHEâ);
add_parameter(paramlist_id,âPARAMFORMâ,TEXT_PARAMETER,âNOâ);
add_parameter(paramlist_id,âdesformatâ,TEXT_PARAMETER,
runformat );
report_job_id:=RUN_REPORT_OBJECT(report_id,paramlist_id);
END;

Please see that in your form you have created a "report object" with the same name ie "imm_print_01" . This is done using Forms builder in object navigator
(For forms-reports intg pls see "forms reports integration whitepaper" (link below)
[    All Docs for all versions    ]
http://otn.oracle.com/documentation/reports.html
[     Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[   Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[   Forms Reports Integration whitepaper 9i ]
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
---------------------------------------------------------------------------------

Trouble Shooting in Business Explorer and its Solution ....

Hi All BW Experts,
I would like to have some sample of BW Reporting issue (Data Discrepancies)and how to solve them in General including its solution. Like on Navigation Display and etc, any input is very highly regarded.
Thank You in Advance
Kumar

Hi dear,
first of all you need to divide the error analysis in several check-areas...
(WHERE your data is wrong ? in PSA? in data mart section? in the final infoprovider ? only at query level ? at DB level?)
As you can see, understand WHERE is your problem solves half problem it-self !
Then look at OSS notes, first of all to verify that there is no std bug in some pgm, or to receive some useful suggestion...
578379 "Analysis/Required infos for wrong values in BW Query Results"
565086 "Composite SAP note: Wrong or no data..."
112458 "Trace log in the Business Explorer"
Hope it helps!
Bye,
Roberto

OSB problem posting 5MB body to a business service endpoint

Hello,
I have an https endpoint they results in a Broken pipe exception after running for about 10mins if I send a SOAP body greater than 5MB. If I send the same request to this endpoint using SOAPUI (no OSB involvement) it works fine and completes in <1min, it only fails through OSB. Also if the request is less than 5MB it works fine through OSB and again completes in <1min.
I've tried calling a proxy service (through test console and SOAPUI) and the business service (through test console) and all fail with the same broken pipe exception. Below is the constant state of the thread during this 10min period.
"[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=3 tid=0x02fa6400 nid=0x16 runnable [0xb19fd000..0xb19ffaf0]
java.lang.Thread.State: RUNNABLE
 at java.net.SocketOutputStream.socketWrite0(Native Method)
 at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
 at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
 at com.certicom.io.OutputSSLIOStream.write(Unknown Source)
 at com.certicom.tls.record.WriteHandler.flushOutput(Unknown Source)
 at com.certicom.tls.record.WriteHandler.write(Unknown Source)
 at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
 at java.io.BufferedOutputStream.write(BufferedOutputStream.java:105)
 - locked <0xe70af568> (a java.io.BufferedOutputStream)
 at weblogic.net.http.HttpOutputStream.write(HttpOutputStream.java:22)
 at weblogic.utils.io.UnsyncByteArrayOutputStream.writeTo(UnsyncByteArrayOutputStream.java:104)
 at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:162)
 - locked <0xcefd08f8> (a weblogic.net.http.SOAPHttpsURLConnection)
 at weblogic.net.http.HttpURLConnection.writeRequestForAsyncResponse(HttpURLConnection.java:492)
 at weblogic.net.http.AsyncResponseHandler.writeRequestAndRegister(AsyncResponseHandler.java:190)
 at weblogic.net.http.AsyncResponseHandler.writeRequestAndRegister(AsyncResponseHandler.java:152)
 at com.bea.wli.sb.transports.http.HttpOutboundMessageContext.send(HttpOutboundMessageContext.java:313)
 at com.bea.wli.sb.transports.http.HttpTransportProvider.sendMessageAsync(HttpTransportProvider.java:564)
 at sun.reflect.GeneratedMethodAccessor310.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:597)
 at com.bea.wli.sb.transports.Util$1.invoke(Util.java:82)
I am running OSB 10.3.0 on SPARC Solaris using Sun JVM.
Any ideas/suggestions?
Many thanks,
Mike.

Hello,
I've tried content streaming but it made no difference. Maybe I've misunderstood content streaming but I thought you use this when body variable in the pipeline pair of a proxy is too big to manipulate in memory. In my scenario this is not a problem (I can report on the body fine just before I route to the business service) the only issue occurs when I call the business service with a request greater than 5MB.
I've already adjusted the WLS timeouts/message sizes as follows:
Max Post Size = -1 (although I think this is only used for POST to WLS rather than the other way around)
Max Message Size = 50000000
JTA timeout = 60
The only stack trace is for the broken pipe:
####<30-Mar-2010 08:35:57 o'clock BST> <Debug> <AlsbTransports> <int-app-04> <RSPCA_ESB_Server1> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1269934557943> <BEA-000000> <LoadBalanceFailoverListener.sendMessageToServiceAsync
com.bea.wli.sb.transports.TransportException: Broken pipe
at com.bea.wli.sb.transports.TransportException.newInstance(TransportException.java:195)
at com.bea.wli.sb.transports.http.HttpOutboundMessageContext.send(HttpOutboundMessageContext.java:370)
at com.bea.wli.sb.transports.http.HttpTransportProvider.sendMessageAsync(HttpTransportProvider.java:564)
at sun.reflect.GeneratedMethodAccessor327.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.wli.sb.transports.Util$1.invoke(Util.java:82)
at $Proxy60.sendMessageAsync(Unknown Source)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageAsync(LoadBalanceFailoverListener.java:148)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToServiceAsync(LoadBalanceFailoverListener.java:543)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToService(LoadBalanceFailoverListener.java:478)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageToService(TransportManagerImpl.java:544)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:422)
at com.bea.wli.sb.pipeline.PipelineContextImpl.doDispatch(PipelineContextImpl.java:583)
at com.bea.wli.sb.pipeline.PipelineContextImpl.dispatch(PipelineContextImpl.java:498)
at stages.routing.runtime.RouteRuntimeStep.processMessage(RouteRuntimeStep.java:128)
at com.bea.wli.sb.pipeline.StatisticUpdaterRuntimeStep.processMessage(StatisticUpdaterRuntimeStep.java:41)
at com.bea.wli.sb.stages.StageMetadataImpl$WrapperRuntimeStep.processMessage(StageMetadataImpl.java:339)
at com.bea.wli.sb.pipeline.RouteNode.doRequest(RouteNode.java:106)
at com.bea.wli.sb.pipeline.Node.processMessage(Node.java:67)
at com.bea.wli.sb.pipeline.PipelineContextImpl.execute(PipelineContextImpl.java:866)
at com.bea.wli.sb.pipeline.Router.processMessage(Router.java:191)
at com.bea.wli.sb.pipeline.MessageProcessor.processRequest(MessageProcessor.java:75)
at com.bea.wli.sb.pipeline.RouterManager$1.run(RouterManager.java:508)
at com.bea.wli.sb.pipeline.RouterManager$1.run(RouterManager.java:506)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
at com.bea.wli.sb.pipeline.RouterManager.processMessage(RouterManager.java:505)
at com.bea.wli.sb.transports.TransportManagerImpl.receiveMessage(TransportManagerImpl.java:371)
at com.bea.wli.sb.transports.http.HttpTransportServlet$RequestHelper$1.run(HttpTransportServlet.java:279)
at com.bea.wli.sb.transports.http.HttpTransportServlet$RequestHelper$1.run(HttpTransportServlet.java:277)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at com.bea.wli.sb.transports.http.HttpTransportServlet$RequestHelper.securedInvoke(HttpTransportServlet.java:276)
at com.bea.wli.sb.transports.http.HttpTransportServlet$RequestHelper.service(HttpTransportServlet.java:237)
at com.bea.wli.sb.transports.http.HttpTransportServlet.service(HttpTransportServlet.java:133)
at weblogic.servlet.FutureResponseServlet.service(FutureResponseServlet.java:24)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3498)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
java.net.SocketException: Broken pipe
at java.net.SocketOutputStream.socketWrite0(Native Method)
at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
at com.certicom.io.OutputSSLIOStream.write(Unknown Source)
at com.certicom.tls.record.WriteHandler.flushOutput(Unknown Source)
at com.certicom.tls.record.WriteHandler.write(Unknown Source)
at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
at java.io.BufferedOutputStream.write(BufferedOutputStream.java:105)
at weblogic.net.http.HttpOutputStream.write(HttpOutputStream.java:22)
at weblogic.utils.io.UnsyncByteArrayOutputStream.writeTo(UnsyncByteArrayOutputStream.java:104)
at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:162)
at weblogic.net.http.HttpURLConnection.writeRequestForAsyncResponse(HttpURLConnection.java:492)
at weblogic.net.http.AsyncResponseHandler.writeRequestAndRegister(AsyncResponseHandler.java:190)
at weblogic.net.http.AsyncResponseHandler.writeRequestAndRegister(AsyncResponseHandler.java:152)
at com.bea.wli.sb.transports.http.HttpOutboundMessageContext.send(HttpOutboundMessageContext.java:313)
at com.bea.wli.sb.transports.http.HttpTransportProvider.sendMessageAsync(HttpTransportProvider.java:564)
at sun.reflect.GeneratedMethodAccessor327.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.wli.sb.transports.Util$1.invoke(Util.java:82)
at $Proxy60.sendMessageAsync(Unknown Source)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageAsync(LoadBalanceFailoverListener.java:148)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToServiceAsync(LoadBalanceFailoverListener.java:543)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToService(LoadBalanceFailoverListener.java:478)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageToService(TransportManagerImpl.java:544)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:422)
at com.bea.wli.sb.pipeline.PipelineContextImpl.doDispatch(PipelineContextImpl.java:583)
at com.bea.wli.sb.pipeline.PipelineContextImpl.dispatch(PipelineContextImpl.java:498)
at stages.routing.runtime.RouteRuntimeStep.processMessage(RouteRuntimeStep.java:128)
at com.bea.wli.sb.pipeline.StatisticUpdaterRuntimeStep.processMessage(StatisticUpdaterRuntimeStep.java:41)
at com.bea.wli.sb.stages.StageMetadataImpl$WrapperRuntimeStep.processMessage(StageMetadataImpl.java:339)
at com.bea.wli.sb.pipeline.RouteNode.doRequest(RouteNode.java:106)
at com.bea.wli.sb.pipeline.Node.processMessage(Node.java:67)
at com.bea.wli.sb.pipeline.PipelineContextImpl.execute(PipelineContextImpl.java:866)
at com.bea.wli.sb.pipeline.Router.processMessage(Router.java:191)
at com.bea.wli.sb.pipeline.MessageProcessor.processRequest(MessageProcessor.java:75)
at com.bea.wli.sb.pipeline.RouterManager$1.run(RouterManager.java:508)
at com.bea.wli.sb.pipeline.RouterManager$1.run(RouterManager.java:506)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
at com.bea.wli.sb.pipeline.RouterManager.processMessage(RouterManager.java:505)
at com.bea.wli.sb.transports.TransportManagerImpl.receiveMessage(TransportManagerImpl.java:371)
at com.bea.wli.sb.transports.http.HttpTransportServlet$RequestHelper$1.run(HttpTransportServlet.java:279)
at com.bea.wli.sb.transports.http.HttpTransportServlet$RequestHelper$1.run(HttpTransportServlet.java:277)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at com.bea.wli.sb.transports.http.HttpTransportServlet$RequestHelper.securedInvoke(HttpTransportServlet.java:276)
at com.bea.wli.sb.transports.http.HttpTransportServlet$RequestHelper.service(HttpTransportServlet.java:237)
at com.bea.wli.sb.transports.http.HttpTransportServlet.service(HttpTransportServlet.java:133)
at weblogic.servlet.FutureResponseServlet.service(FutureResponseServlet.java:24)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3498)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Thanks,
Mike.

Inactive menu "PC check" in Business Explorer

Hello BI expert,
I 've installed SAPGUI 7.10 patch 4, BW 3.5 addon patch 2 and BI 710 addon patch 300 on pc (window XP SP2, Excel 2002 SP3.
In the Bex Analyser, the entries tab PC check (and Browser, Web Application Designer) into the Business Explorer are not active (displayed as pale gray) ?
Files sapbexc350710.xla and sapbexc710.xla are present in C:\Program Files\...\SAP Shared\BW and the results is correct when I execute then directly.
But I don't understand why it is not possible to launch them by menu into the BusinessExplorer.
Thanks in advance for your help,
Daniel.

Hi,
Problem with the installation of these files.I will recommend you to uninstall the GUI and frontend patch and reapply it again.
Ensure that you meet all the prerequisite for GUI 7.10 See note 1025122,1050605.
Rgds
Manoj Kumar

Error at the moment to send the report for the printer.

When I execute a report for the Report Builder (Oracle Developer Suite 10g), the report is generated successfully, but, at the moment to send for the printer errors occur: REP-0069/REP-57054/REP-50157 (error 1848).
Please, help me!!!
Nádia

Hi,
We had the same problem at my organization. Our DBA had to install a patch:
To implement the solution, please apply the patchset to upgrade to 10.1.2.2.0.
To obtain a patchset from MetaLink:
1) Click on Patches & Updates.
2) Click on Simple Search
3) Select your product, release and platform.
4) Patch number is 4960210
Description PLACEHOLDER BUG FOR AS/DS 10G R2 PATCH SET 2 10.1.2.2
Product Oracle Development Tools
Release 10.1.2.2
The Patchset 4960210 is a patch for the Application Server AND Developer Suite
5) Read any applicable notes before downloading, then click the Download button.
Note: Please review the Readme file for instructions on how to install the patchset.
you should launch the installer with the executable setup.exe provided in the patchset, it could shows up a message indicating nothing was upgraded, but the release should be modified to 10.1.2.2
Hope that helps

Business Explorer Analyzer not installed

Hi, I installed SAP GUI 710 (patch level 8) and I have no problems going into Bex Query Designer but when I try clicking for Analyzer, it doesnt work. Nothing happens.. But when I try using transation RRMX, i get an error that the Business Explorer Analyzer is not installed. I am using Excel 2007.. Can you help? Do I have to do anything else??

Hi,
I had similar problem in my PC also earlier. After updating to our IT Dept, they uninstalled GUI and then installed .Net patches and then SAP GUI 710 with latest patch.
Also in MS Office 2007 they went into the Macro security settings and made it low.
After that the problem is resolved.
Hope this helps.
Regards
raj

Business Explorer Role

Hi
I have assigned a role for Business Explorer : com.sap.ip.bi.business_explorer_showcase.
I got the following links:
My Portfolio | BEx Portfolio | BEx Web Analyzer | BEx Broadcaster | Collaborative BI
What is purpose of this role. Can anyone give me some documentation about the purpose of this role.
Murali.

Hi Murali,
the Business Explorer role is a show case for Information Broadcasting. My Portfolio, BEx Portfolio and Collaboriative BI have different layouts and features for working with a BW report.
Information Broadcasting is a feature of a BW system.
For more information look at
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/a5/359840dfa5a160e10000000a1550b0/frameset.htm">Information Broadcasting</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/7e/821640b7b6dd5fe10000000a155106/frameset.htm">Configuration of the Integration of SAP BW and SAP EP</a>
Regards,
Stephan

Problem executing a report in the Business Explorer

Similar Messages

Maybe you are looking for