Problem exporting 1080p/59.94 CS6.0.3 ...

I have a Sony consumer camcorder where I am recording 1080p/59.94 footage which gets stored in .mts files. I put in a screen shot from MediaInfo below if that helps. My target is a Sony PS3. I can play the native .mts file off the camera directly with no issue, but having problems producing an exported file that plays correctly. I tried H.264 and exporting to an .mp4 file, but the audio gets out of sync, video slows down, etc. I also tried the latter with a much lower bit rate of 10mbps and that made no difference. I noticed that the PS3 reports the video information as MPEG-2 TS 26.6 mbps. I tried to export using the MPEG2 format with TS multiplexing, but can't seem to get an option for 59.94 in the frame rate settings. Suggestions? Thanks.

Jim: are you referring to H.264 .mp4 export?   If so, I only see AAC, AAC + Version 1, AAC + Version 2 as audio options.   How do I get AC3?   I have two other Sony BD players.    One of them can play the original MTS file just fine, but the exported H.264 .mp4 has no audio, perhaps similar to what you are describing above.
Generally speaking, do you have an option for MPEG2, 59.94 fps progressive?   I was going to try that format as an experiment given the PS3 Information button reporting "MPEG-2 TS ...", but only lower frame rates are offered.
Is there a way for me to provide information on the native camera 1080p/59.94 footage that would help in recommending what to do in PP CS6 on export? Or other debugging / trial & error I an do?   You would think if the PS3 can play a clip from the camera, and PP CS6 can load, edit, play, etc. I ought to be able to export in some compatible way.
Thanks

Similar Messages

Problems exporting from premiere pro cs6

Heeeeeeeeeeeeelp please!
I downloaded my recent project from cs5.5 into a trial version of cs6 and now I'm getting an unknown error (problems compelling video) when I try to export my project (in H.264).
I tried shutting off the auto safe, exporting in a different format (quicktime), restarting offcause, removing effects from the clip where the export failes, even tried exporting without that particular clip, but then it just happened another place in the film at another clip.
I'm thinking there could be an export limit when you're only working with the trial, cause I have been able to export smaller bits of the timeline and as well other smaller projects. I'm a mac user and not that good at computers in general.
I can still export a early version of my project from cs5.5 but I would really love to detect the problem in stead of starting all over since it's my BA project and I'm on a deadline...
I really hope somebody know something helpfull

I been in this same situation for two weeks. First update your software to the latest update. Just released yesterday
I believe you have more than one clip. At the end and begining of the clip you should have little grey triangle shape. They are called handles, meaning extra space at end point and at begining. Usaually for transition. If you dont see it on both clips (as in picture) then the one clip which is misiing need to be trimed little or more until handles disappear or some time you see full triangle (as in picture). Do same if there are more. Then just try to export the ending where clips attach each other. Set in and out points as I did in the picture. Export and make sure to choose sequence in and out setting. here is the picture:
I hope it works. I dont use this software anymore. I had a trail version. Used for two weeks. Every day same problem then finally figured it out and moved back to Edius 6. Thanks

Freezing while exporting out of premeire cs6?

I am having problems exporting out of premiere cs6. It completely freezes halfway, all of my settings match, does anybody know why this is happening?? please help.

Thank you Mr. Hunt, I found out that it was one of the clips in my TL it was a motion Jpeg,, I had to export it out as a H.264. Thanks for your help.
Date: Tue, 19 Feb 2013 16:01:47 -0800
From: [email protected]
To: [email protected]
Subject: freezing while exporting out of premeire cs6?
    Re: freezing while exporting out of premeire cs6?
    created by Bill Hunt in Premiere Pro CS5, CS5.5, & CS6 - View the full discussion
For that error, perhaps this Adobe KB Article will be useful? http://helpx.adobe.com/premiere-pro/kb/error-compiling-movie-rendering -or.html Good luck, Hunt
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5086487#5086487
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5086487#5086487
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5086487#5086487. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Pro CS5, CS5.5, & CS6 by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Problem in the exportation to PDF (Indesign CS6)

Problem in the exportation to PDF (Indesign CS6):
Page with 3 layers: 1st background image, 2nd semi-transparent white square, 3rd text in color black.
It looks OK in Indesign, but when exporting, in the PDF file the letters are not black, they are gray. What could happened? I've tryed already the obvious solutions (the order of layers is OK, restarted the PC...)
Thank you in advance.

the default [Black] swatch (0/0/0/100 in CMYK) really is a lighter color than a rich black mixed from four CMYk ink, or 3 RGB colors. It would be pretty unusual to see a black background in an image that wasn't a mix.
Do you have the preference in ID for Appearance of Black set to Display All Blacks Accurately? That will show you the difference in ID on screen as well.

If my camcorder records in 1080i, will i have any problems exporting my movie in imovie as 1080p? I read something about interlacing or deinterlacing?

If my camcorder records in 1080i, will i have any problems exporting my movie in imovie as 1080p? I read something about interlacing or deinterlacing?
I also have another question. I can't find an external blu-ray burner for a mac anywhere. How to I simply watch my exported 1080p movie edited in imovie on my hd tv? Apple tv only supports 720p correct? I read that the simplest way to watch it would be to save it on a flash drive then use a playstation 3 to watch the movie. Does anyone else have any other ideas? Thanks in advance

For 1080p via iMovie '11, just remember to optimize video for “Full – Original Size”.
The latest Apple TV supports HD.
I've seen low cost Blu-Ray DVD players for less than USD$100.00. I've also seen reasonably priced external BR for Mac...try OWC, as one example.

CS6 Having problems exporting buttons with rollover to dreamweaver

Im trying to export out of fireworks cs6 buttons with rollover and import into dreamweaver cs6. It looks good in dreamweaver until i view it in internet explorer here is what it comes out like.

Using HTML exported from a graphics application in your pages is a very VERY bad idea. You see the result. The best approach is to create your graphics in FW, and use DW to build the HTML, not FW. The HTML function in FW is only useful as a way to quickly build a PROTOTYPE page for demonstration purposes, it's not suitable for use on a real web page.
Show us your code and we can fix this for you. Alternatively (and better), just use DW to apply your rollover to this image.

After exporting in Premier Pro CS6 my text flickers in the video

After exporting in Premier Pro CS6 my text flickers in the video, how do I fix it?

I have the exact same problem, but I'm actually using CC. I don't have an option for "match source high bitrate." Is anyone responding to forum questions out there?

Trouble Exporting MXF from PP Cs6

Hello,
I am having a lot of trouble exporting a sequence of mxf footage out of premiere pro cs6. Whenever I try to export directly from Premiere the program stalls out. I tried sending it to adobe media encoder, which worked temporarily. Now, the sequence doesn't show up in adobe media encoder. I then tried sending turning the sequence into an AE composition, which again worked seamlessly temporarily. I am working with multi-clip sequences and last night I noticed that when I turn my sequence into an AE comp, after effects began referencing the wrong angle. After Effects also began giving me error messages saying that it was having trouble conforming some of the mxf files. Any insight into how I can fix this would be most helpful. I am working on a Mac Pro Ghz-6 Core Intel Xeon.
Thanks!

What exactly do you mean by "multi-clip sequences." Multicam?
If so, try dropping the same source content into a sequence without any multicam edits and see if that exports. That will help determine if the problem is limited to multicam sequences.
Have you tried closing all the apps, confirming through Activity Monitor that all the processes shut down (including pproheadless and dynamiclinkmanager), and then relaunching the apps? Or simply rebooting the system. This feels a bit like a problem where the initial failure to export left things in a bad state, so that you need to clear the decks.
What are your export settings? Do you have similar problems exporting to other formats?
And just to confirm the reference in the thread's title, you're running PPRO CS6, not CC, right?

Problem exporting AVCHD to H.264

I am having big problems exporting a sequence to H.264. I will try and provide all the information. Please let me know if I have missed something.
Problem:
The sequence will not export cleanly. I have tried H.264, MPG 2 and MOV files none works. My preferred output would be H.264. I have exported files in this format before (taken on the same camera) with any trouble but this time there are jumps in the video (i.e. the picture jerks for a fraction of a second) and/or massive distortion of the whole image - see screen grab. The problem is not present when viewing the sequence.
I would really appreciate help with this.
Computer:
Mac OS 10.5.8
2.8 ghz Intel Core duo
4gb 800 mhz ddr2 sdram
Camera:
Panasonic HMC 151 (PAL version of HMC 150)
Native file type:
AVCHD
Here is are the properties of one of the video files:
Type: MPEG Movie
File Size: 343.0 MB
Image Size: 1280 x 720
Pixel Depth: 32
Frame Rate: 50.00
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:02:19:10
Average Data Rate: 2.5 MB / second
Pixel Aspect Ratio: 1.0
Sequence details:
Sequence 01
1280 x 720
00;17;41;26, 25.00 fps
48000 Hz – Stereo
Sequence 03
1280 x 720
00;04;55;17, 50.00 fps
48000 Hz - Stereo
(I've tried it both 50 and 25fps)
Output:
I have tried a variety of settings including:
H.264 HDTV 1080p 25 set to 50fps
H.264 Custom set to 50 fps

Premiere pro version:
4.1.0

Problem exporting to gif

Sorry for my English! I have a problem exporting to .GIF all the animation is in the Movie. Ascorroded Movie .GIF to see the layers. Help me

Go to file and export for gif but it will not sure it retain all of them on the stage as a gif animations. becoz we have more contents like movieclips, nested animations and controls.

I am having problems exporting my time lapses from quick time pro i need to save my files as photo jpegs but the standard video compression window will not open fully,

i am having problems exporting my time lapses from quick time pro i need to save my files as photo jpegs but the standard video compression window will not open fully, it just keeps my mac (old 1.6Ghz 2.5 GB sdram G5 still good for most stuff i need) spinning for ever but i can see compression type H.264 selected and the other setting but i can not select any other options as it still thinking but never opens! why is this happening how do i get round it?
my work flow is: 300 images shot on a 5d mark II medium jpegs opened in Light Room cropped to 16:9 then exported and opened in quick time i can save a .mov H264 giving me files sizes of 14 mb for a 16 second time lapse, mp4 9 mb. the only way i can get large files is saving as a self contained movie then i get 300mb files.
i need to save my files 1920 x 1080 photo jpeg codec as i want HD quality.
i am sure there is a simple way round this?
thanks guys!

It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
How large is your hard drive and how much hard drive space do you have left?

Hello everybody, is anybody else having problems exporting music to their iphone 4's from their itunes 10.6.1. (7)?

hello everybody, is anybody else having problems exporting music to their iphone 4's from their itunes 10.6.1. (7)? i sure am. somehting is way differant. i used to be able to simply drag, and drop albums, artists, and entire genres to my phone without a worry. now i drag an album to my phone, and it will only add a couple of the songs. so i drag and drop again, and maybe even a third time to get all whole album on there. oh, and the album artwork is a no-show. i dont know what i'm missing. it's sure not what i'm used to. anyways, i'm new to this support community deal. thank you in advance for any help.
much respect,
tommy bravo

After further testing, I noticed that iTunes not only becomes totally unresponsive but will start using all the CPU until I kill the process. After restarting, it works again for a while and then it dies again...
Luis

How to solve the problem when opening program illustrator cs6 ERROR: 16 It is WINDOWS 8.1 / 64 BIT help please

how to solve the problem when opening program illustrator cs6
ERROR: 16
It is WINDOWS 8.1 / 64 BIT
help please

Thanks, Jeff! The file Adobe Setup Error.log contains the following information:
02/14/14 07:20:26:474 | [INFO] | | OOBE | DE | | | | 8860 | DEVersion: 5.0.0.0
02/14/14 07:20:26:475 | [INFO] | | OOBE | DE | | | | 8860 | Loading library from C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\DE5\Setup.dll
[    8860] Fri Feb 14 07:20:26 2014 INFO
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
CHECK : Another Native OS installer already running
Create Required Folders
Assuming uninstall mode
Lookup for master payload
[    8860] Fri Feb 14 07:20:26 2014 ERROR
DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
[    8860] Fri Feb 14 07:20:26 2014 INFO
:: END TIMER :: [Total Timer] took 6.90443 milliseconds (0.00690443 seconds) DTR = 579.338 KBPS (0.56576 MBPS)
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s), 0 warning(s)
ERROR: DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
Exit Code: 33 - The product is not installed, cannot uninstall.
Please see specific errors and warnings for troubleshooting. For example, ERROR: DW040 ...

Resolution problems exporting to DVD

I am brand new to FCP 5 and everything I have learned has been within the past two weeks. I have read MANY posts on resolution settings, square pixels vs. retangular pixels, iDVD problems, exporting problems, etc. However I have not found an answer to my problem, but many helped.
I am currently trying to project video from a DVD. The projection needs to be an EXACT size. After exporting and viewing with projection in QT Fullscreen, the video is exactly what I want.
However, when I burn a DVD using iDVD and project it from a DVD player, the projection is slightly stretched horizontally. Why is that?
The sequence is originally from HD and the export settings are -
-Frame Size: 640x480 (4:3)
-Pixel Aspect Ratio: 1440x1080
-Exported using QT Conversion NO COMPRESSION
(There are many other combinations of frame size and pixel aspect ratio's that also work initially, but they project with the same problem.)
I had to have missed something.
ANY suggestions are greatly appreciated.
Eric
Power MAC G5 Mac OS X (10.4.7)

The footage did come from an HDV from Sony.
I use QT Conversion because if I export it as an QT Movie, the video is distorted. However, when exported through Quicktime conversion/quicktime movie/no compression, the movie is exported in the correct dimensions, though the DVD play back issue still persists.
I am running off of iDVD v 5.0.1 and could not find a place where I could choose a 16:9 option, if that is what you meant.
The sequence does include a PSD mask which was imported as a Layered Graphic Sequence. That shouldn't have any impact on the burning issue though.

PDF quality problems exporting from InDesign and Photoshop

Hi There.
I'm having big problems exporting my InDesign files to PDFs and retaining the res. And it's not just the images (I understand about the dpi) it's the type on there too.
I have been exporting as the preset High Quality Print - is this wrong. Are there other settings to ensure the PDF I export retains the high-res quality and clarity?
At the moment it comes out high-res when I export it as a jpeg or eps but not PDF.
I have also noticed the same problem when I export to a PDF from Photoshop.
I really need to create interactive and high quality print PDFs from my InDesign files.
Please can you advise.
Thanks
Karen

I am also having problems with pdfs exported from Illustrator and Indesign recently. I didn't have these problems before, so I don't kno if something has changed in my settings that I am unaware of.
When I use the 'japanese dots' border in Indesign, it shows on the pdf as a kind of dotted line. I'm exporting as 'High Quality Print'. I switched to Illustrator and drew a line with the pen tool, and converted it to a dotted line; it looked just how I wanted in in Illustrator, but as soon as I exported it, the same thing happened.
I have used the 'japanese dots' border in the past, exporting as 'High Quality Print', and not had this problem.
Does anyone have any suggestions?

Problem exporting 1080p/59.94 CS6.0.3 ...

Similar Messages

Maybe you are looking for