Problem exporting 16:9 sequence

Hi everyone. I am trying to export a 16:9 sequence (tried both QT and QT conversion) but I'm getting a 4:3 result every time. Following Tom Wolsky's suggestion, I made sure the sequence is 16:9, to match my captured anamorphic footage. Is it possible that I need Quicktime Pro to be able to get the right, 16:9 aspect ratio for the exported file? If not, any other suggestions on what to do? Thank you for your help.

After much trial and error, I have figured this out.
Here is my 7-step guide to getting anamorphic 16:9 DV onto DVD through iDVD. There might be easier ways but I just couldn't find them... this one works...
1. export anamorphic sequence with QT (without conversion) to desktop (it will look 4:3)
2. download myDVDEdit from the internet (free)
3. create new project with iDVD, and follow these myDVDEdit instructions:
http://www.mydvdedit.com/viewtutorial.php?t=27e&pg=forum
4. when you run into the challenge of trying to save the modified Video TS file, here is what to do about removing the 'read only':
http://www.mydvdedit.com/viewtopic.php?t=53&pg=forum
5. download LiquidCD from the internet (free)
6. with LiquidCD, you can burn a DVD pointing to the modified Video TS folder
7. end result: 16:9 great picture on DVD

Similar Messages

Problem exporting from large sequences

I'm reposting here becase it could be hardware related (the system is new), and because it wasn't answered on the CS5 forum and quickly got buried beneath 100 other threads. There's usually more in-depth support on this forum. Here goes:
I'm running CS5 5.02 on Windows 7 Professional 64-bit with an X58A-UD3R mobo, i7 930, 12 GB RAM, and a GTX 470. The footage is 4:3 NTSC DV, 29.97fps, 720x480. The sequence is DV NTSC Standard 48 kHz. OS on C drive, media and project on E drive, exporting to F drive.
I often put 100 clips or sometimes even 1000 clips on a sequence.
When I go to File-->Export and start exporting video for a small work area (10 seconds or less), it brings up a dialogue box that says "Encoding Sequence 01" and doesn't make any progress for a painfully long time if there are many clips on the sequence. The more clips in the sequence, the longer it waits before exporting. If I isolate the same clip in another empty sequence and try to export the same small work area, it quickly exports the file. As I add and delete clips from a sequence, the problem waxes and wanes. When there's over 200-300 clips, I've never seen it export the video because it just sits there forever "encoding".
I've tried this with several export formats: mpeg2, h264, quicktime, etc., with the same results. Exporting a still JPEG will quickly work on the large sequence, but it is very slow to export video.
It's as if Premiere is trying to encode the entire sequence first even though I've told it to only encode the small work area. It still only exports the small work area I requested, not the entire sequence.
Can someone please try to replicate this a few hundred clips and/or give me advice?

Thanks for your replies, guys.
I'm under deadline but will try running PPBM5 on Tuesday and post back here to see if you have ideas.
There must be something wrong with my setup, because although the project runs smoothly, the exporting lags significantly even with 100 or 200 clips. Surely CS5 should be able to export quickly from sequences as small as that. I had no problem doing this with previous versions of Premiere Pro.
Can anyone try throwing 100-200 clips onto a sequence to see if it causes any lag before exporting a small work area?

Problem exporting DVCPRO HD sequence

Anyone know what this means or how to fix it? Is my graphics card broke? Called apple and their level 1 tech cannot answer.
http://www.shopjt3.com/bad/g5problemgraphicscard.png
Thanks all
G5 Dual 2.5, 2.5GB RAM, NVIDIA GeForce 6800 Ultra DDL running FCS 2 with latest updates

Sounds like an incompatibility in the codec, notwithstanding acceptance by FCP.
Quick troubleshooting diagnostic: Navigate through some media directories and make sure that COLOR is seeing the things (quicktime movies) that it should be able to, and make a note of what it sees or doesn't recognize when you get to the DVCProHD QT.mov that you are trying to open. My guess is that it won't.
You may have to try to re-export the clip under FCP as a new independent movie. Then re-connect to the new Apple-rendered movie n either your FCP sequence, or the COLOR timeline, so that you don't have to go back and re-razor the whole thing. You did razor the movie in FCP, right?
jPo

Resolution problems exporting to DVD

I am brand new to FCP 5 and everything I have learned has been within the past two weeks. I have read MANY posts on resolution settings, square pixels vs. retangular pixels, iDVD problems, exporting problems, etc. However I have not found an answer to my problem, but many helped.
I am currently trying to project video from a DVD. The projection needs to be an EXACT size. After exporting and viewing with projection in QT Fullscreen, the video is exactly what I want.
However, when I burn a DVD using iDVD and project it from a DVD player, the projection is slightly stretched horizontally. Why is that?
The sequence is originally from HD and the export settings are -
-Frame Size: 640x480 (4:3)
-Pixel Aspect Ratio: 1440x1080
-Exported using QT Conversion NO COMPRESSION
(There are many other combinations of frame size and pixel aspect ratio's that also work initially, but they project with the same problem.)
I had to have missed something.
ANY suggestions are greatly appreciated.
Eric
Power MAC G5 Mac OS X (10.4.7)

The footage did come from an HDV from Sony.
I use QT Conversion because if I export it as an QT Movie, the video is distorted. However, when exported through Quicktime conversion/quicktime movie/no compression, the movie is exported in the correct dimensions, though the DVD play back issue still persists.
I am running off of iDVD v 5.0.1 and could not find a place where I could choose a 16:9 option, if that is what you meant.
The sequence does include a PSD mask which was imported as a Layered Graphic Sequence. That shouldn't have any impact on the burning issue though.

Video gets SOFT after using export/ media/match sequence settings

Never had this on any other version of PP. PC based 64bit Win 7
EX: I get a job delivered to me that was shot on mini dv (now on a HD) & the clips are all seperated as they were shot.
I put them on the TL & want to make 1 long clip out of them.
I export-media-match sequence settings & the video gets 25% softer. Yes my sequence settings are correct.
I have tryed using "max render quality" button but made no difference.
Does cs5 have a problem in this area? The video looks terrible!
Please advise

Just drag your footage to the New Item button and will create a sequence that matches your footage.
There isnt a preset for that size but you can use the Desktop setting and create one that way too.
GLenn

Problem exporting using Compressor in FCP?

I had a problem exporting using Compressor in FCP and then I found an interesting article from Apple:
http://support.apple.com/kb/TS1099
but it doesn't really explain the solution. What steps do I need to take exactly in Compressor to make it work?

James M. has it right. Convert the MP3 and the WAV files to AIFF, 48khz, 16 bit and use those in your Sequence. You might even have to convert the existing AIFF file(s) if they aren't 48khz, 16 bit.
Once you've edited the new files into your Sequence, do an Audio Mixdown, then export.
-DH

Problem exporting AVCHD to H.264

I am having big problems exporting a sequence to H.264. I will try and provide all the information. Please let me know if I have missed something.
Problem:
The sequence will not export cleanly. I have tried H.264, MPG 2 and MOV files none works. My preferred output would be H.264. I have exported files in this format before (taken on the same camera) with any trouble but this time there are jumps in the video (i.e. the picture jerks for a fraction of a second) and/or massive distortion of the whole image - see screen grab. The problem is not present when viewing the sequence.
I would really appreciate help with this.
Computer:
Mac OS 10.5.8
2.8 ghz Intel Core duo
4gb 800 mhz ddr2 sdram
Camera:
Panasonic HMC 151 (PAL version of HMC 150)
Native file type:
AVCHD
Here is are the properties of one of the video files:
Type: MPEG Movie
File Size: 343.0 MB
Image Size: 1280 x 720
Pixel Depth: 32
Frame Rate: 50.00
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:02:19:10
Average Data Rate: 2.5 MB / second
Pixel Aspect Ratio: 1.0
Sequence details:
Sequence 01
1280 x 720
00;17;41;26, 25.00 fps
48000 Hz – Stereo
Sequence 03
1280 x 720
00;04;55;17, 50.00 fps
48000 Hz - Stereo
(I've tried it both 50 and 25fps)
Output:
I have tried a variety of settings including:
H.264 HDTV 1080p 25 set to 50fps
H.264 Custom set to 50 fps

Premiere pro version:
4.1.0

Why does our Final Cut Pro Batch Exports incorrectly name sequence files?

Why does our Final Cut Pro 7.0.1 Batch Exports incorrectly name sequence files?
For example I can Batch Export 10 sequences one of which is called:
"899-006TL013 It's Not Your Fault 800-509-2875"
Then the output for some of the files are along the lines of:
"899-006TL013 It's No#61386E.mov"
I have seen this happen with 1-6 files or not at all... is it just dumb luck?
What is going on here and is there any way to avoid or remedy this issue?
We first thought having the render destination window open caused it but that was not the source.
Any ideas?

I've run into the same problem with FCP 7.0.2 when exporting from the sequence using File --> Export --> QuickTime Movie. I exported a file today called "BSP - 01 - How You Can Be Sure You Are A Christian" and it came out as this "BSP - 01 - How You Can#1630". This is getting to be annoying. I also need to name these files the length they are. I'm hoping someone may see this and have a suggestion (besides shortening the file name). It seems like I've also seen this on shorter file names, but at the moment I can't prove it.

Export uncompressed targa sequence

I work in a television station using Final Cut and LiveType to make graphics. Our clip server imports image sequences, but can only recognize uncompressed targa files. Exporting as a targa sequence from either program applies some sort of compression to the images. Currently we use GraphicConverter or Photoshop to do a batch convert to uncompress, but it would be handier to be able to export directly uncompressed. Is this possible? Alternatively, is there a 3rd party utility that can convert a DV movie to an uncompressed targa sequence. We have Cleaner, but it uses the same compression as Quicktime.
Thanks.

Thanks John. I get codecs and how they work (I've been making film and commercials for broadcast and cinema for over 10 years) what I find confusing is that apple have removed the choice to render / export with no codec at all - 'none'. We shot a film on Sony F3 with S-Log using an Aja Ki Pro to record directly to an external drive as ProRes 422, there's a weird problem with s-log and prores where the white highlights are clipped but the information is still in the file, because we recorded prores the only way to fix this problem is to apply 3way color correction in FCP (because prores is native to fcp) and bring the highlights down to 99IRE. We are adding CG set extension etc to a few shots so VFX dept are looking for 16bit tiff sequences so that there is no colour loss on their clips so everything will composite together properly in Nuke before online and grade. The only way to do this is to apply the colour correction in FCP, render as uncompressed 'none' then bring the uncompressed file into AE and export the tiff sequences. That way there is no loss of colour information or how the a codec will interpret colour. I've had to export with 'none' hundreds to times but with Lion that option has vanished. It's still there on Snow Leopard, which is what I have to use, but it's gone from Lion. Which is weird, no? Maybe Apple want to force us to use one of their codecs

Problem exporting .mov file

I'm trying to export a :30 second sequence using quicktime conversion to a .mov file. I use the default settings with the H.264 codec and uncompressed 16 bit audio. (I've also tried a few other settings with Sorenson and Sorenson 3) The same thing happens everytime. The export takes forever (about 20 minutes) then stops when the progress bar gets to about 79%. A general error comes up. On some occasions, I have also gotten a notice that says my startup disk is close to full. This is confusing because all my drives have at least 10gb of space available on them.
It was suggested in another thread that this could be a result of a corrupt media or render file. If so, how does one determine that this is the cause? It was also said that bad RAM might be to blame.
Any help would be appreciated.

Hmm...
I wouldn't jump right into upgrading as a fix at this point, since your program shouldn't have any trouble exporting a simple Quicktime, and the upgrade to Final Cut Studio from FCP 3 is $799 USD. That isn't full price, but still may be a bit steep if you've chosen to keep using FCP 3 for so long. Although I will say that subsequent versions include many improvements that you might actually appreciate so keep it in mind.
Have you tried exporting using Quicktime Conversion from any other projects with any other clips? That would also be a good idea, to narrow down the problem. Did you try exporting a Quicktime Movie using Current Settings? I realize that may not be adequate for your final intention, but it would help the troubleshooting as well.
I once had a problem exporting a clip from FCP and after trying everything, I recaptured the clip and it ended up working. There were no visible glitches or skips in the video to indicate that the clip itself would have been corrupt, but turns out it was. So if you can recapture, since it's only a 60-second clip, maybe give that a whirl.
You should also trash your FCP prefs (search for com.apple.FinalCutPro.plist on your sytem drive and delete that file), repair your permissions (in Disk Utility), and restart.
Post back,
Joni

Problem exporting HDV to NTSC format

Hello!
I have a problem exporting my HDV timeline to NTSC 48Khz format. I simply open the timeline and click Export as Quicktime Movie and choose NTSC format 48Khz format and keep everything else the same.
It exports, but then all of a sudden it stops 3/4`s of the way through and only captures it to there, not to the end. This is leaving me really really confused!
Any ideas what is wrong?

Make sure there's no in or out points selected in the timeline window. If it fails again with those gone, it's likely a media file it hits when it stops... about the same precentage in from the head of the sequence.
Jerry

Project manager - problem exporting a project with AE compositions.

I have a problem exporting my project to another disk, this is what happens:
I needed to move the project from the windows partition of my Mac to the Mac partition, in order to be able to continue my edit under MacOS, my sequences include a series of After Effects compositions of footage that has been stabilized in warp stabilizer using the option "replace with AE composition" from the timeline.
Using the project manager I started my backup operation, with these options:
Source: all sequences selected
Resulting Project: Collect files and copy to new location
Include Audio conform files
Destination: a folder in the Mac partition
The resulting project had a message popping up saying that AE rpject file is missing (it was, I had to manually copy and paste it from ithe win partition to the mac) and once copied obviously AE couldn't find the source video clips of its compositions, so I had to manually re-link them all (quite difficult job to do among almost two years of footage).
What have I done wrong ?
Why AE lose the connection with the fils?
Thanks

Thanks Jim,
I understand that Adobe Anywhere solves this, but there should be this fairly basic functionality (which exists in Avid and FCP) in a non-enterprise edition of the software. I have submitted a couple different feature requests about this, going back to CS5, so hopefully enough people make similar requests for a fix to be implemented. Adobe Anywhere is really not a solution for our small shop as currently configured/priced, especially when we can have editors working remotely with very affordable USB 3 drives. The only hangup is the markers, which just isn't worth a 5 figure fix. As such it's hard to consider the problem solved for either us or any small shop or post crew.
Best,
Jon

Problem exporting to gif

Sorry for my English! I have a problem exporting to .GIF all the animation is in the Movie. Ascorroded Movie .GIF to see the layers. Help me

Go to file and export for gif but it will not sure it retain all of them on the stage as a gif animations. becoz we have more contents like movieclips, nested animations and controls.

I am having problems exporting my time lapses from quick time pro i need to save my files as photo jpegs but the standard video compression window will not open fully,

i am having problems exporting my time lapses from quick time pro i need to save my files as photo jpegs but the standard video compression window will not open fully, it just keeps my mac (old 1.6Ghz 2.5 GB sdram G5 still good for most stuff i need) spinning for ever but i can see compression type H.264 selected and the other setting but i can not select any other options as it still thinking but never opens! why is this happening how do i get round it?
my work flow is: 300 images shot on a 5d mark II medium jpegs opened in Light Room cropped to 16:9 then exported and opened in quick time i can save a .mov H264 giving me files sizes of 14 mb for a 16 second time lapse, mp4 9 mb. the only way i can get large files is saving as a self contained movie then i get 300mb files.
i need to save my files 1920 x 1080 photo jpeg codec as i want HD quality.
i am sure there is a simple way round this?
thanks guys!

It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
How large is your hard drive and how much hard drive space do you have left?

Hello everybody, is anybody else having problems exporting music to their iphone 4's from their itunes 10.6.1. (7)?

hello everybody, is anybody else having problems exporting music to their iphone 4's from their itunes 10.6.1. (7)? i sure am. somehting is way differant. i used to be able to simply drag, and drop albums, artists, and entire genres to my phone without a worry. now i drag an album to my phone, and it will only add a couple of the songs. so i drag and drop again, and maybe even a third time to get all whole album on there. oh, and the album artwork is a no-show. i dont know what i'm missing. it's sure not what i'm used to. anyways, i'm new to this support community deal. thank you in advance for any help.
much respect,
tommy bravo

After further testing, I noticed that iTunes not only becomes totally unresponsive but will start using all the CPU until I kill the process. After restarting, it works again for a while and then it dies again...
Luis

Problem exporting 16:9 sequence

Similar Messages

Maybe you are looking for