Problem Exporting a Video Originally Imported using F4V Format

the last version of flash i used with Macromedia Flash MX. Now i'm using Flash CS6, in fact this is my first time using it and i've been trying to get this task done for just over 12 hours now but i can't seem to figure it out....
I have 3 videos that i split up into 3 scenes using windows live movie maker
then i used media encoder to convert all the cenes to F4V
From there, i imported the first Scene of each video into individual layers in Flash CS6 used the "Load external video with playback Component Method
The reason why i use that method was because when i use the other method with the video in FLV format the video and audio was out of sync when i exported/test scene
with the load external video method it works perfect in test scene... pretty much the way i want it to, however when i export the video it doesn't even play my best guess is that's because each video is only on one keyframe. and needs to be converted and action added.
am i right? where do i go from here? how can i export these scenes... what am i missing?

these are the supported youtube formats:
.MOV
.MPEG4
.AVI
.WMV
.MPEGPS
.FLV
3GPP
WebM
and, of those, only mov and avi can be exported from flash pro. those exports are usually unsatisfactory because flash pro is not a video editing program. ie, you are using the wrong tool for the job.
check adobe premiere.

Similar Messages

Big problems exporting a video in Media Encoder - detailed info

Problems with exporting media through Adobe Media Encoder.
Hi there. I am really confused now, writing this, cause my Premiere CS4 has worked pretty good the year I have had it.
So it has chosen a really bad timing to cause me problems.
I am working on a big musicvideo production. The whole video is now finished, and the labels and the artists are waiting for the video. But I’m facing big problems now. And I have tried everything to solve this, without succeeding.
·         When I export the video, the Adobe Media Encoder sometimes waits and waits and waits and waits, and nothing happens.
Screen shot:
·         When it does start, if goes to about 20%, and then it interrupts and give me "an unknown" error in the log-file:
Screen shot:
·         Sometimes when I open the project , it gives me the following message when importing the media files.
Screen shot:
·         The weird thing is that this only happens to the HD version. I have the same video in DV version, in a DV project, and it exports without any problem.
So PLEASE help me here, what shall I do??? I MUST finish this video!

And here is my log-file with all the attempts I've tried with different settings...
- Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD.prproj
- Output File: C:\Users\Pawel\Desktop\TheThingCalledLove-MasterCut-HD.wmv
- Preset Used: Custom
- Video:
- Audio:
- Bitrate:
- Encoding Time: 00:12:58
2010-03-09 11:46:46 : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_3.prproj
- Output File: C:\Users\Pawel\Desktop\TheThingCalledLove-MasterCut-HD-1280x720.wmv
- Preset Used: Custom
- Video:
- Audio:
- Bitrate:
- Encoding Time: 00:12:55
2010-03-09 14:09:21 : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_6.prproj
- Output File: L:\TheThingCalledLove.wmv
- Preset Used: Custom
- Video:
- Audio:
- Bitrate:
- Encoding Time: 00:07:57
2010-03-09 14:24:41 : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_6.prproj
- Output File: L:\TheThingCalledLove_1.wmv
- Preset Used: Custom
- Video: 1280x720, 25 [fps]
- Audio: 440 kbps, 44 kHz, 2 channel 24 bit VBR
- Bitrate: Compressed, VBR, 2 Pass, Audiences:1, Avg 5500,00 [kbps]
- Encoding Time: 00:07:38
2010-03-09 14:38:40 : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_6.prproj
- Output File: L:\TheThingCalledLove.wmv
- Preset Used: Custom
- Video: 1280x720, 25 [fps]
- Audio: 440 kbps, 44 kHz, 2 channel 24 bit VBR
- Bitrate: Compressed, VBR, 2 Pass, Audiences:1, Avg 5500,00 [kbps]
- Encoding Time: 00:06:21
2010-03-09 16:50:42 : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_7.prproj
- Output File: L:\Sequence 02.wmv
- Preset Used: Custom
- Video: 1280x720, 25 [fps]
- Audio: 440 kbps, 44 kHz, 2 channel 24 bit VBR
- Bitrate: Compressed, VBR, 2 Pass, Audiences:1, Avg 5300,00 [kbps]
- Encoding Time: 00:03:14
2010-03-09 17:10:49 : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_6.prproj
- Output File: L:\TheThingCalledLove_1.wmv
- Preset Used: Custom
- Video: 1280x720, 25 [fps]
- Audio: 440 kbps, 44 kHz, 2 channel 24 bit VBR
- Bitrate: Compressed, VBR, 2 Pass, Audiences:1, Avg 5500,00 [kbps]
- Encoding Time: 00:07:34
2010-03-09 19:49:06 : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_6.prproj
- Output File: L:\TheThingCalledLove.wmv
- Preset Used: Custom
- Video: 1280x720, 25 [fps]
- Audio: 440 kbps, 44 kHz, 2 channel 24 bit VBR
- Bitrate: Compressed, VBR, 2 Pass, Audiences:1, Avg 5500,00 [kbps]
- Encoding Time: 00:07:35
2010-03-09 20:00:11 : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_12.prproj
- Output File: L:\thu.wmv
- Preset Used: HDTV 720p 25 High Quality
- Video:
- Audio:
- Bitrate:
- Encoding Time: 00:30:15
2010-03-09 23:21:07 : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
- Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD-nest.prproj
- Output File: L:\Sequence 02.wmv
- Preset Used: Custom
- Video:
- Audio:
- Bitrate:
- Encoding Time: 01:35:20
2010-03-10 14:18:32 : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
- Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD-nest_1.prproj
- Output File: L:\Sequence 02.wmv
- Preset Used: Custom
- Video:
- Audio:
- Bitrate:
- Encoding Time: 00:11:16
2010-03-10 14:39:37 : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
- Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD-nest_2.prproj
- Output File: L:\Sequence 03.wmv
- Preset Used: Custom
- Video:
- Audio:
- Bitrate:
- Encoding Time: 00:24:50
2010-03-10 14:53:11 : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
- Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_14.prproj
- Output File: C:\Users\Pawel\Desktop\Sequence 02.wmv
- Preset Used: Custom
- Video:
- Audio:
- Bitrate:
- Encoding Time: 00:29:41
2010-03-10 14:58:02 : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
Could not write XMP data in output file.
- Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_15.prproj
- Output File: C:\Users\Pawel\Desktop\Sequence 02.wmv
- Preset Used: Custom
- Video: 1280x720, 25 [fps]
- Audio: 440 kbps, 44 kHz, 2 channel 24 bit VBR
- Bitrate: Compressed, VBR, 2 Pass, :0, Avg 6736,00 [kbps]
- Encoding Time: 00:13:57
2010-03-10 17:37:50 : Encoding Failed
Error compiling movie.
Unknown error.
Could not write XMP data in output file.
- Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_16.prproj
- Output File: C:\Users\Pawel\Desktop\Sequence.wmv
- Preset Used: Custom
- Video: 1280x720, 25 [fps]
- Audio: 440 kbps, 44 kHz, 2 channel 24 bit VBR
- Bitrate: Compressed, VBR, 2 Pass, :0, Avg 6736,00 [kbps]
- Encoding Time: 00:07:55
2010-03-10 17:56:15 : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_18.prproj
- Output File: C:\Users\Pawel\Desktop\Sequence 02.mpg
- Preset Used: HDTV 720p 25 High Quality
- Video: PAL, 1280x720, 25 [fps], Progressive, Quality 4,0
- Audio: 384 [kbps], 48 kHz, 16 bit, Stereo, MPEG
- Bitrate: VBR, 1 Pass, Min 4,00, Target 10,00, Max 18,50 [Mbps]
- Encoding Time: 00:16:03
2010-03-11 08:52:52 : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_19.prproj
- Output File: C:\Users\Pawel\Desktop\TTCL.mpg
- Preset Used: HDTV 720p 25 High Quality
- Video: PAL, 1280x720, 25 [fps], Progressive, Quality 4,0
- Audio: 384 [kbps], 48 kHz, 16 bit, Stereo, MPEG
- Bitrate: VBR, 1 Pass, Min 4,00, Target 10,00, Max 18,50 [Mbps]
- Encoding Time: 00:12:04
2010-03-11 09:08:39 : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_17.prproj
- Output File: C:\Users\Pawel\Desktop\Sequence.mp4
- Preset Used: Custom
- Video: PAL, 1920x1080, 25 [fps], Progressive
- Audio: AAC, 320 [kbps], 48 kHz, Stereo
- Bitrate: CBR, 32,00 [Mbps]
- Encoding Time: 00:01:08
2010-03-11 09:10:41 : Encoding Failed
The Operation was interrupted by user

Problem exporting versions in original size

hi!
with Aperture 3 when exporting versions in original size, I obtain 400xYYY pixels (images constrained to 400x400) showing impossibility to respect the original size.
attempting to solve the problem I have exported selecting limited wider sizes (like <4000x4000) to allow the program to keep the higher resolution. It doesn't work because then all images are forced to be exported in 4000x4000.
anybody has the solution?
thank you. david

Welcome to the forum.
Go to Aperture>Presets>Image Export, select the export preset you are using and make sure that it's on 'original size' and not on 'fit within'.
Ian

What is the best way to export a video for broadcast using FCE? H264?

I need to get the best quality HD video for broadcast using final cut express and I need to know all info and settings please?

Hello,
You need to find out from the broadcaster what specs they require you to meet. H.264 is probably not it.

How to export a video at a moderate certain format and size in premiere CC 2014: No Huge File Results!

I have the latest version of Adobe Premiere, CC 2014 but whenever I want to render and export a video that is typically 70 megabytes in size I can't seem to always see how big the file will end up being for all the formats and I don't want to end up with a video larger than 250 to 300 megabytes in size just for the extremely best or highest quality even though I want the video to be well polished and in better quality than I usually get thee, These videos are usually imported as mp4. What file version of mp4 or otherwise would give me an originally imported video of 70 megabytes an output of no more than or around 300 megabytes or even less without compromsing video quality? I don't want a huge file size as I am uploading it to my YouTube channel via their web interface on another person's machine and they don't have Premiere and only has a DSL connection. So what video output settings should I use for a good quality video that isn't smaller than the original but the same size or a bit higher and not extremely large like MOVs and sometimes mp4s usually are depending on what you do to it and it is outputted.?

Export
Format: H.264
Preset: YouTube (make sure this matches the dimensions of your sequence)
You could further adjust the Target Bitrate but the preset is already setup for a good quality file for upload.
You can also do further reading on Video Bitrates.

SQL Developer:Problem with multi byte size after import using excel format

Hi,
Need your help. I am trying to export multibyte characters from our China instance(r11i instance) using SQL Developer's export data via Excel format into an R12 Vision instance. I have a staging table with exactly the same structure in both instances. Prior to export to excel, I check the byte size of the sample data below using LENGTH and LENGTHB sql functions and these are the results:
Sample data = 材料LI（USD）
LENGTH=9
LENGTHB=13
Then, I exported the table as excel file. Afterwards, I used SQL Developer to import the excel file into the table of the target instance. I check the bytesize again and here are the results:
Sample data = 材料LI（USD）
LENGTH=9
LENGTHB=17
The byte size increased from 13 to 17. I did not change anything on the excel file. Just straight forward export to excel file then imported it to the target instance. How come there is an increase in byte size? Has anyone encountered this in SQL Developer? We really need to export the files as excel.
Source:
Database version = 9.2.0.5.0
Target:
Database version = 11.1.0.7.0
Regards,
Wendell
Edited by: user13038177 on May 13, 2010 9:05 PM
Edited by: user13038177 on May 13, 2010 9:06 PM

Wendell,
This forum is for handling issues migrating from non-Oracle databases to Oracle databases.
As this is an Oracle to Oracle issue using SQL*Developer export it would be better to open a new thread in the SQL*Developer forum -
SQL Developer
There will be more people there who can help with this problem.
Regards,
Mike
Edited by: mkirtley on May 14, 2010 10:16 AM

Problems Exporting AVCHD videos in HD

Hi guys,
I just bought a Sony hdr-tg3.
When I want to export the HD files via QT (tried all formats up to 1080i) the result is a movie with "fading lines" whenever there is faster movement.
What am I doing wrong ? Are there certain settings ?

Hello Herbysworld,
you've come tumbled across a problem that's been thoroughly discussed in this forum. For detailed information check this huge thread:
http://discussions.apple.com/thread.jspa?threadID=1884912&tstart=0
The short version is, that iMovie 09 doesn't deinterlace your footage properly. You can avoid this by importing and/or exporting at 960x540 or using progressive material from the start. If your camcorder can record 30p/25p you're fine. It seems you can also get clean 1080i output if you don't apply any resizing (picture-in-picture, stabilization). Then you can deinterlace with a 3rd party program like JES Deinterlacer.

Problems exporting a video in Media Encoder

Hello all,
I have a strong believe that it is a some kind of memory leak.
I have the same problem where I want to export a AVCHD file 1080i to DV. AME stops quite randomly but always around the same spot in the timeline. Even at places where the clip does not have any effects in it.
My workaround for now is to export it in small pieces and paste it in Encore again. BTW: My 2:02 hour project is now somehow 1:59 and the sound clips (AC3) doesn't fit for 100% (is 1 or 2 frames longer than the video) when I past it in Encore. For me it is acceptable in this case, but it should work in a proper way.
When I export the timeline (or piece of it) I see the available memory (I have 12 GB in total) run down from 6 GB to less than 1 GB especially when the program is working on a clip that is longer than 1 minute. And in those long clips the AME always seems to fail. Sometimes in the beginning of that clip, sometimes at the end. Quite random so it seems. If I take a next part of the timeline to export, beginning with that same problematic clip, the system can take the hurdle somehow and keeps encoding until the next long clip comes around.
Duplicating the piece of timeline in AME and expecting it to fail at exactly the same spot is not happening also. It stops always a bit earlier, so I suspect that this has something to do with the systems memory.
I havent't tried it to export the whole two hour timeline to AE and encode it from there.
Should I adress my memory a different way in Windows 7?
I have a Intel Quad Core i7-975 3.33 GHz and 12 GB memory.
Have CS4 Production on a D-drive installed
a Scratch/Page drive as advised by Harm with 8000 MB set on virtual memory
and a Video drive
I bought this system together with CS4 for video editing, so it is installed on a clean system.
Should I delete all prerendered stuff from Premiere?
Thanks, Iemke

Hello all,
I have a strong believe that it is a some kind of memory leak.
I have the same problem where I want to export a AVCHD file 1080i to DV. AME stops quite randomly but always around the same spot in the timeline. Even at places where the clip does not have any effects in it.
My workaround for now is to export it in small pieces and paste it in Encore again. BTW: My 2:02 hour project is now somehow 1:59 and the sound clips (AC3) doesn't fit for 100% (is 1 or 2 frames longer than the video) when I past it in Encore. For me it is acceptable in this case, but it should work in a proper way.
When I export the timeline (or piece of it) I see the available memory (I have 12 GB in total) run down from 6 GB to less than 1 GB especially when the program is working on a clip that is longer than 1 minute. And in those long clips the AME always seems to fail. Sometimes in the beginning of that clip, sometimes at the end. Quite random so it seems. If I take a next part of the timeline to export, beginning with that same problematic clip, the system can take the hurdle somehow and keeps encoding until the next long clip comes around.
Duplicating the piece of timeline in AME and expecting it to fail at exactly the same spot is not happening also. It stops always a bit earlier, so I suspect that this has something to do with the systems memory.
I havent't tried it to export the whole two hour timeline to AE and encode it from there.
Should I adress my memory a different way in Windows 7?
I have a Intel Quad Core i7-975 3.33 GHz and 12 GB memory.
Have CS4 Production on a D-drive installed
a Scratch/Page drive as advised by Harm with 8000 MB set on virtual memory
and a Video drive
I bought this system together with CS4 for video editing, so it is installed on a clean system.
Should I delete all prerendered stuff from Premiere?
Thanks, Iemke

Problems exporting HD video from Premiere Elements 9 for Vimeo (program crashes or video is blurry)

I have a 10 minute wedding video I am trying to export from Adobe Premiere Elements 9 to upload to vimeo. I followed the directions from this video: Exporting for upload to Vimeo with Adobe Premiere Elements on Vimeo to figure how to accomplish this. The first time I followed the directions, the resulting video file was fuzzy and blurry, not at all like the HD video I could view in the program before export. Since then, I've tried exporting it multiple times with different settings, and each time the program crashes when the video is around 95% complete. How can I rectify this situation? This is a wedding video I made for a paying customer who would like their video on vimeo as soon as possible.
Thanks for your help!
Let me know if you need more details or clarifications.
Laura

Laura
What are the properties of what you are putting on the Premiere Elements 9.0/9.0.1 Timeline? Are you working with a SD or HD file?
What have you set as the project preset when you started the projec?
1. So, video compression, audio compression, frame size, frame rate, interlaced or progressive, file extension, pixel aspect ratio...as
much information as you can supply....sometimes the brand, model, settings of the camera recording the video will give us all the
information that you need to set up the project correctly or to verify that it has been set up correctly.
Case Study....
Let us assume that your video is 1920 x 1080 @ 29.97 progressive frames per second.
Project Preset in New Project Dialog
NTSC
DSLR
1080p
DSLR 1080p30@ 29.97
When you go to take your Timeline content to Vimeo from within the Premiere Elements 9.0/9.0.1 feature
Share/Online, you will discover that there is no Vimeo choice in that version.
So, what you are going to do is to export your Timeline to a file (AVCHD.mp4) saved to your computer hard drive and then upload that file
to Vimeo at the Vimeo website.
Share
Computer
AVCHD
with Presets = MP4 H.264 1920 x 1080p30
Have you been there and done that?
Summary...
The answers are in the details....needed
a. properties of source media
b. project preset
c. details of your project's Timeline content
c. export settings used
We will be watching for your follow up.
Thank you.
ATR

Facing Problems in Streaming Video over internet using FMS 3.5

I,am using FMS 3.5 to stream video over internet.This video will be a part of a website www.mywebsite.com . I have the webserver in my company. This webserver has the local LAN IP : 192.168.10.19 which is binded with a public internet ip 212.77.xx.xx .This website is hosted using IIS 6.0 on OS windows 2003 server with SP2
I created a swf name sample.swf from sample.flv file and gave it the rtmp address as follows:
rtmp://192.168.10.19/vod/_StreamingVideo_/sample.flv (where _StreamingVideo_ is the instance on the server, and 192.168.10.19 is the LAN IP of server) ,and it worked fine and every one within the local company network could see the streaming video. Now i tried to replace this local address with the public address and the address became as follows:
rtmp://212.77.xx.xx/vod/_StreamingVideo_/sample.flv
After giving this public IP in the rtmp address i,am getting a message "Failed to load Flv from the address rtmp://212.77.xx.xx/vod/_StreamingVideo_/sample.flv" and as as result the video is not streamed and it only shows the progress bar on the link
www.mywebsite.com/VideoStreaming/Sample.html without loading the video. I have also checked the ports 80,1935,1111 on the server and they are open. Is there any problem with my rtmp address with public IP or any other reason ??. Please help me out in this regard because im realy stuck here.

Adding to my previous post this is the XML output i get when i try to access the fms admin console from local ip address i.e http://192.168.10.19:1111/fms_adminConsole.htm
<?xml version="1.0" encoding="utf-8" ?>
- <result>
<level>error</level>
<code>NetConnection.Connect.Rejected</code>
<description>Admin user requires valid username and password.</description>
<timestamp>2/3/2010 8:26:08 AM</timestamp>
</result>
but when i try to access fms admin console through public ip (http://212.77.xx.xx:1111/fms_adminConsole.htm) then it gives me the following :
Internet Explorer cannot display the webpage.
Any more suggestions Jay (because really ur the only one helping me out in this so far) ??

Problems with xf86-video-vesa in use? (Solved)

Continue installation? [Y / n] s
checking the integrity of the package ...
(55/55) checking for file conflicts [#####################] 100%
Error: Failed to submit the transaction (conflicting files)
xf86-video-vesa: / usr / lib / xorg / modules / drivers / vesa_drv.so exists in filesystem
xf86-video-vesa: / usr/share/licenses/xf86-video-vesa/COPYING exists in filesystem
xf86-video-vesa: / usr/share/man/man4/vesa.4.gz exists in filesystem
Some errors occurred, therefore, no package has been updated.
What should I do?
Last edited by claupper (2010-04-12 01:23:57)

claupper wrote:
Continue installation? [Y / n] s
checking the integrity of the package ...
(55/55) checking for file conflicts [#####################] 100%
Error: Failed to submit the transaction (conflicting files)
xf86-video-vesa: / usr / lib / xorg / modules / drivers / vesa_drv.so exists in filesystem
xf86-video-vesa: / usr/share/licenses/xf86-video-vesa/COPYING exists in filesystem
xf86-video-vesa: / usr/share/man/man4/vesa.4.gz exists in filesystem
Some errors occurred, therefore, no package has been updated.
What should I do?
I used the command pacman-Sf xf86-video-vesa, and after this command, everything has been installed normally.

Anyway to record video on PC using quicktime format

Hello,
Is there any program out there that allows you to capture DV video directly into a PC and capture it using the quicktime format instead of AVI?

Hey zero823!
I have an article for you that will assist you in attempting to import footage from your camera into iMovie. First, here is a general article about importing video and photos into iMovie:
iMovie (2013): Importing overview
http://support.apple.com/kb/PH14670
The link that most specifically addresses your question can be found below:
iMovie (2013): Import from file-based cameras
http://support.apple.com/kb/PH14673
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Horiz lines on 16mm video conversion imported in vob format

Imported 16mm video conversion in vob format (properties 25.00fps, image 520x576). When I magnify frame in monitor screen, quality is excellent.
When I view in Flash flv or export frame (see pic), image degrades and horizontal lines appear on edge of moving objects/people - bit like old low-res monitor. Some frames seem OK but most are unusable. Anybody else seen this issue?

In NCH Prism I select the "Add DVD" option.
Output format "AVI", Encoder Options - Video compressor "DV Encoder PAL", Sound compressor "DV Audio", Sound format "48,000 Hz Stereo".
Video Output options "Tick, Resize Video" -> "Shrink or Enlarge ... 720W x 576H". "Tick, Change framerate 25.00"
Works an absolute treat so far.

Problem exporting HUGE ship drawings to any graphics format.

I work at a law firm which deals with very large drawings (some of which are 4 feet wide, by about 16 to 20 feet long). Sometimes we receive PDF's of these drawings, but their sheer size makes them unmanageable to print. One option is to export the PDF as a JPG or TIF, then split said image file into smaller sections for printing. Trouble is, whenever we do this, the image file becomes blank. Once exported, it will open in a graphics program successfully, but it always appears blank. It doesn't matter if we export the PDF as a jpg, bmp, tiff, etc. the results are always the same. We're currently running Acrobat 9 Standard on the Windows XP Pro platform. Has anyone else had this problem, or is there a way to split up a single PDF drawing (not multiple pages mind you) into smaller "chunks?"

That would be great, except the tile option is printer-specific, and unfortunately none of our printers will go beyond a 4x4 (or 16 page) span. Still, good suggestion.

In creative cloud, can closed captioning be exported with video in HD and SD format?

Can I format closed captioning in both HD and SD format?

You will likely get better program help in a program forum
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Problem Exporting a Video Originally Imported using F4V Format

Similar Messages

Maybe you are looking for