Problem exporting file from motion 5

Hello,
I am trying to export a file from Motion 5 and whe I play the quicktime back, everything is jumbled and I can't read it. When I am working in Motion and scrubbing along through the file everything looks fine. Can someone please help me out?
Thanks,
David

For starters, what's the version number for Motion and What OS are you on? Are you up to date or using an older version? Next, what format are you exporting to (ProRes, H.265, etc.)? Finally does this happen with every project or just this particular one. Can you post a screen shot of what the problem looks like? There are a lot of possibilites to consider, the more info you can provide the better luck there will be in someone maybe helping you with a solution.

Similar Messages

Export/Import From Motion to FCP

Hello
I'm new to this forum and have just recently begun working in the film and video industry. I am also new to the Apple community. So please excuse any misuse of terms as am not fully integrated into the business yet. I have created a background that has a lot of motion as well as an emitter in it and duplicating the sequence didn't seem to be the way to go. So I looped the sequence to run for 90 minutes. I am trying to decide if there is a need to export the file from motion as a quicktime file or should I just import the motion document into FCP and overlay my text elements (also created in motion) on V2. Any help would be greatly appreciated.
By the way thanks to Patrick for all you great "fun with" projects they have been a great help in learning Motion.

Thanks for your input. What I'm building is a sponsor loop for a banquet. I needed a 90 minute graphics bed over which to apply my text and logo elements. I ended up modify and existing 15 sec clip from the motion library tossing in an emitter and looping it for 90 minutes.
The problem was the sheer size of the file and the time it took to render if FCP. I ended up exporting the file as an 8 bit uncompressed QT movie so I wouldn't have to rerender it in FCP. It took about 2 1/2 hours but in the end it worked out.
Here is a follow up question. I have finished the text and logo element that goes over the bed but when the time comes to import the Motion file into FCP I have to render every time I put it into the timeline. I realize that the first time it appears it's necessary but is there a way to get around that having to let the thing render over night as this clip will be copied 44 times and each copy takes about 6 minutes to render.
I was thinking about exporting it as a QT file from motion just like the background but then I can't get the title sequence to appear over the backgound the way I would like as a QT element compared to Motion element. Tranparency issues.
Any and all suggestions will be greatly appreciated.

I have problems transferring files from PC to Mac and from Mac to Mac

I have problems transferring files from PC to Mac, and from Mac to Mac. PC to PC is fine. Nothing but problems with the Mac. One example:
While working on my PC, I open shared folders on an external HDD connected to the Mac. I click on paste to move the files. I get an error after a few seconds to a minute of trying to move several files from my PC Win 7 to Mac OS Maverick, that there is a file already at the destination on Mac. This statement is true, but it was just put there because I am copying them over in that same action. It reads 0Kb and wasn't there before I started. Then I get an error: The Action Cannot be completed because the folder is open in another program. Close the folder or file and try again..
Whether I click on it a bunch right of way or wait, it still takes about 45 seconds. I have to do it with every file and it only happens when copying from a PC to Mac. I have even restarted both computers so nothing is using any files. If I copy one file at a time, I don't get any error.
So I have one file to move, no problem. If move 5 files, The first will go fine, but it shows all 5 files in folder at once. All other files than the first show 0kb. I get the file already existing error once it starts the second file transfer, and I select move and replace. Then I get The Action Cannot be completed because the folder is open in another program. I wait or click repeatedly until it starts to move file. That file will then show something other than 0kb. When it is done, the error process starts all over. I tried checking the PC with unlocker, but the files do not show themselves locked on the PC.

Its not only French. Even certain characters in English will come across as gobblydegook from 1 platform to another. I see this in emails that likely were composed in Word & the characters don't come across.
Not sure if this is still true, but years ago someone explained that there is a standard character set & then I think its extended characters & those vary from platform to platform or language to language, etc.

I am having a problem moving files from a iMac in location mac in another location. I have tried using Dropbox and the Public folder in the i disc. When I drag the files into dropbox they become alias' and I can't open them at the other end beca

I am having a problem moving files from an imac in one location to an imac inanother location. I have tried using Dropbox which is installed in both locations but when i drad a file ino yhe app it becomes an alias. When I get to the other location it says I can't open the file because the " original application that created it is not present". This is despite the fact that the app that created both files is installed in both computers. If I use the Public folder in the idisc, when I get to the other location the file isn't there. Am I forgetting to turn something on or off? Should I manually sync the Public folder and if so how? Thanks
Message was edited by: stephenfromdelray beach

So now that's two of us. Hopefully, someone has an answer.

Exporting files from Final Cut Pro in Snow Leopard

I am using Final Cut Studio 2. I recently upgraded to Snow Leopard. Before the upgrade when I would export files from Final Cut the dialog box would automatically go to the last used folder location. Now, each time it goes to the system hard drive. Is there a way to fix this?
Thanks

Fix what?
Just choose the correct folder to which to export.

How do I export file from photoshop CC?

How do I export file from Photoshop CC

Good day!
Export what as which file format?
• jpg, png, gif can be created with File > Save for Web,
• jpg, png, gif, tif, psd, psb, eps, … with File > Save As (check »As a Copy« if needed),
• some video formats, Illustrator Paths, Data Sets with File > Export.
Regards,
Pfaffenbichler

Exporting files from iPod

I have a lot of videos saved to my iPod that got deleted from my computer because I didn't have the space to store them. Now, my sister has an iPod, and I want to give them to her. I want to know if it's possible to export files from an iPod to a computer, but I'd welcome any other suggestions related to the situation.

http://discussions.apple.com/thread.jspa?messageID=2647831&#2647831
http://discussions.apple.com/thread.jspa?messageID=2647790&#2647790
http://discussions.apple.com/thread.jspa?messageID=1660579&#1660579

I have problems exporting pictures from iPhoto

I have problems exporting pictures from iPhoto.
Every time I try to export a picture, iPhoto closes itself.
I don't even get to the point where I can decide how I want to export it.
Can anybody help me?

Post the first 50 lines only of the crash report
Regards
TD

How I can export files from CS5.5 to send for further editing in CS6 and no lose quality?

how I can export files from CS5.5 to send for further editing in CS6 and no lose quality?

If all you need for further editing is the contents of your Timeline,
then you should follow Harm's sage advice.
Lagarith Lossless Video Codec
http://lags.leetcode.net/codec.html
Ut Video Codec Suite
http://www.videohelp.com/tools/Ut-Video-Codec-Suite
But, if you will need all of your source media files to continue the edit,
you should consider using the Project Manager.
Trim or copy your project
By using the Project Manager, you will be continuing the edit
with the original media files and there will be no quality loss.
Be aware that once you have edited the project in CS6,
it will be problematic (but not impossible) to return to edit in CS5.5.

Issues exporting file from Target group

Hi Experts,
Can someone let me know the process for exporting file from Target group, I am working on CRM 7.0 .
or give me the SNOTE to implement the same.
Thanks
Leela

Hi,
for small Target Groups (i.e. Target Groups that can be displayed completely on the UI, < 10k members) you can export them via the export to spreadsheet button on the header of the Target Group item page (right side). Note that only the members that are shown in the table on the UI are exported. For bigger Target Groups, you can only export them to the application server. To do this, you will have to press the "Export to File" button on the header of the Target Group page. this will schedule a job which exports your Target Group to the application server. You can download it from there using report CRM_MKTTG_FEXP_SHOW_FILE.
Hope this helps
--klaus

Exporting files from Photoshop Elements 12

I'm trying to export files from Elements 12 but the export option is greyed out. Why?

There is no export in the editor except the "export creations", because your files are not "in" the editor. You just save as. But PSE doesn't do any vector formats, so you aren't going to be able to save as EPS or .AI.

Can 9.3.1 ImportExport utility import an exported file from 9.2.0.0 ?

Hi,
Can 9.3.1 ImportExport utility import an exported file from 9.2.0.0 ?
When I ran 9.3.1’s ImportExport utility to import 9.2’s export.csv, it gave me the following error messages:
D:\Hyperion\common\utilities\CSSImportExportUtility\importexport>CSSImport.bat i
mportexport2.properties
Trace...
2009-04-07 01:05:18,025 Attempting a import operation
2009-04-07 01:05:20,728 Import : Attempting to create user admin
2009-04-07 01:05:20,728 Import : Password not specified for user admin
2009-04-07 01:05:20,744 Import : Unable to create user admin
2009-04-07 01:05:20,744 Import : Create user admin failed. Attempting up
date.
2009-04-07 01:05:20,744 Import : Attempting to update user admin
2009-04-07 01:05:20,775 Import : User updated : admin
2009-04-07 01:05:20,790 Import : Attempting to create user essadmin
2009-04-07 01:05:20,790 Import : Password not specified for user essadmi
n
2009-04-07 01:05:20,790 Import : Unable to create user essadmin
2009-04-07 01:05:20,790 Import : Create user essadmin failed. Attempting
update.
2009-04-07 01:05:20,790 Import : Attempting to update user essadmin
2009-04-07 01:05:20,806 Import : Unable to locate user essadmin
The number of errors detected during the import operation exceeded the n
umber of allowable errors. Please correct the errors and then rerun the program
or increase the value of the import.maxerrors property.
Aborting program...
====================
We have a user essadmin in 9.2.0.0 but not in 9.3.1.
Since we already have a user called admin in 9.3.1, I deleted user admin in export.csv file and tried to import again.
The 9.3.1 ImportExport utility did not like the newly updated export.csv file

Hello John,
I'm exporting from 9.2.0.0.
I'll try updating my 9.2's export file with password and resubmitting it.
In the meantime, I was told 9.3.1 ImportExport will run in 9.2.0.0. However, everytime I tried that, it gives me the error
When I run 9.3.1's cssexport.bat importexport.properties in 9.2.0's HSharedServices server, I get the error message:
The system cannot find the path specified.
I attach the importexport.properties file for your examination. All the paths are correct, such as:
C:/Hyperion/SharedServices/9.2/AppServer/InstalledApps/WebLogic/8.1/CSS.xml
C:/Hyperion/common/utilities/importexport931/trace.log
What am I doing wrong?
my css.xml file was found in /C:/Hyperion/SharedServices/9.2/AppServer/InstalledApps/WebLogic/8.1/CSS.xml.
We are using weblogic. Is that the correct location?
I don't get the above messages when I run 9.3.1's cssexport.bat importexport.properties in 9.3.1
importexport.css=file:/c:/Hyperion/SharedServices/9.2/AppServer/InstalledApps/WebLogic/8.1/CSS.xml
importexport.cmshost=localhost
importexport.cmsport=58080
importexport.username=admin
importexport.password={CSS}MRcYv323uzxGr8rFdvQLcA==
importexport.enable.console.traces=true
importexport.trace.events.file=d:/Hyperion/common/utilities/CSSImportExportUtility/importexport/trace.log
importexport.errors.log.file=d:/Hyperion/common/utilities/CSSImportExportUtility/importexport/errors.log
importexport.locale=en
importexport.ssl_enabled=false
export.fileformat=csv
export.file=d:/Hyperion/common/utilities/CSSImportExportUtility/importexport/exportHSS.csv
export.internal.identities=true
export.native.user.passwords=true
export.provisioning.all=true
export.delegated.lists=false
export.user.filter=*
export.group.filter=*
export.role.filter=*
export.producttype=*
export.provisioning.apps=*

Create 8i export file from a 9i database

I understand that to create an Oracle Release 8i Export file
from an Oracle9i database we must run Oracle release 8i Export
against an Oracle9i server.
However, before we do the export, do we need to run
8i "CATEXP.SQL" script to the 9i database ?
Thanks.

In which directory can the file be found, as in http://www.thinkfuturerecruitment.co.uk/beta/admin/ http://www.thinkfuturerecruitment.co.uk/beta/admin/admin.php and what is the name of the file, as in myCV.pdf
Gramps

Problem uploading files from Dreamweaver CS3 to Yahoo

I am having a problem uploading files from Dreamweaver CS3 to
an FTP site on Yahoo.
The error message I get is "No response from server.
Reconnecting..."
I am able to connect to Yahoo using other FTP clients
successfully.
I am able to connect to Yahoo using Dreamweaver MX 2004
successfully.
I tried playing with various settings (i.e. passive ftp,
server compatibility options) but to no avail.
Any thoughts on this would be appreciated.
Thank you,
Steven

I tried enabling passive FTP but it doesn't help.

Possible to disable recently exported files from showing?

at the home screen for ExportPDF, you can see the recently exported files. Is it possible to disable the recent files from showing?

Hi ymco-hi,
As Sara mentioned there's no way to disable the recently exported files from showing. The only way you can make the files not appear in the list is by deleting them.
Please follow the steps below for the same:
Click on 'View All' and it will direct you to the 'Files' section where all the files are backed up.
As you take your mouse on the file you want it to be disappeared, a check box will appear at the left corner.
Click on that and you will see few option at the top.See this screen shot.
Click on 'Delete' button and your file will no more appear on Export PDF screen.
Regards,
Florence

Problem exporting file from motion 5

Similar Messages

Maybe you are looking for