Problem exporting from mts source

When I'm done editing my mts source clips and try to export them to wmv 720p I get any error message that says it can't see the source files, but they're there.
"Could not read from the source. Please check if it has moved or been deleted."

http://forums.adobe.com/thread/452052

Similar Messages

  • Quality problem exporting from FCE

    Hi,
    i have a quality problem exporting from FCE. I have finalized a 30 minute movie and want to send it to friends on DVD or CD-ROM. when i use "export as quicktime movie" the file has 6.5 GB and won't fit on a DVD-ROM. when i use "export with quicktime conversion" and choose quicktime movie with H.264 compression and highest quality the movie goes down to 4.2GB. Now it would fit on a DVD-ROM, but the quality is not good. The picture looks blurred and i see some type of interlace-effect.
    which type of export format do i have to choose to avoid the interlace and blurred pictures? is there a magic format that does not cost that much quality and reduces the movie by 30-40%? or would a video DVD work better? how do i create a DVD? with iDVD?
    thanks for your help!

    or would a video DVD work better? how do i create a DVD? with iDVD?
    That's what Id do.
    Export as QuickTime Movie (reference file is OK) and drop the export to iDVD.
    You will get 1 hour of FCE Timeline on a single sided disc using Best Performance (iDVD setting).
    Two hours using Best Quality (iDVD setting)
    Al

  • PDF quality problems exporting from InDesign and Photoshop

    Hi There.
    I'm having big problems exporting my InDesign files to PDFs and retaining the res. And it's not just the images (I understand about the dpi) it's the type on there too.
    I have been exporting as the preset High Quality Print - is this wrong. Are there other settings to ensure the PDF I export retains the high-res quality and clarity?
    At the moment it comes out high-res when I export it as a jpeg or eps but not PDF.
    I have also noticed the same problem when I export to a PDF from Photoshop.
    I really need to create interactive and high quality print PDFs from my InDesign files.
    Please can you advise.
    Thanks
    Karen

    I am also having problems with pdfs exported from Illustrator and Indesign recently. I didn't have these problems before, so I don't kno if something has changed in my settings that I am unaware of.
    When I use the 'japanese dots' border in Indesign, it shows on the pdf as a kind of dotted line. I'm exporting as 'High Quality Print'. I switched to Illustrator and drew a line with the pen tool, and converted it to a dotted line; it looked just how I wanted in in Illustrator, but as soon as I exported it, the same thing happened.
    I have used the 'japanese dots' border in the past, exporting as 'High Quality Print', and not had this problem.
    Does anyone have any suggestions?

  • Problem exporting from FCP using compressor

    Out of the blue - I'm getting batch failures trying to export from FCP for use in a DVD. Immediately after selecting compressor for export, I get an error reading "That file already exists", and a new tab appears in the media browser with a lengthy character string. Compressor opens fine, and I select Best Quality 4:3 encoding for video and aiff48 for audio. When the batch is submitted - it promptly fails and blames FCP for generating an error.
    Did all kinds of restarts and work arounds to no avail. The promising news is that this error seems to occur only when exporting from FCP through Compressor.
    My work-around is to export a QT movie of the piece, quit FCP, launch Compressor, and then import the QT for batching.
    Hope this helps anyone else in similar situations
    Martin
    G5 PPC   Mac OS X (10.4.8)   FCP 512 post production

    Hi:
    How long is your movie?
    The best workflow is FCP > Compressor > DVDSP.
    You can encode your timeline directly to get MPEG2 video and Dolby 2 (AC3) audio files. Then import those in DVDSP and author your DVD.
    Using Compressor you control the full encoding process. You can test with small parts of your movie (those where you got problems with iDVD) and find the best encoding options fopr your footage.
    Of course the DVDSP learning curve is longer than iDVD but once you learned ir you probably never go back. Like iMovie and FCP.
    To give you detailed info about what encoding settings to use you must post some info about your FCP project.
    Hope that helps !
      Alberto

  • Problems exporting from FCPX

    I can not export from FCPX. Get stuck on 95% and I give up after 45 min. It´s about 15 min fotage that I tried to export in Apple TV3 format.

    I've had this issue weekly with a show I produce.  It bugs me for hours.  In my case, I have to wait until the entire timeline is rendered, and then I have to export it to ProRes 422.  Any other codec requires a re-render, which provokes the problem again.  The problem starts when I take a few clips from my P2 and use the stability function along with any color correction topping them off with titles.  It seems as though part of the rendering process involves re-analyzing the entire clip during rendering, and if I don't allow it to completely render the clips, I get missing video with graphics on top.  I have a 12-core machine with 16GB RAM, and yet it still takes about two hours to render my 30 minute show after I'm done.  This doesn't include the hours it takes to analyze the P2 clips as I import them, which also hinders me during editing and causes continual crashes.  I'm hoping this new update I'm about to run addresses some of those issues.

  • Problems exporting from Text From Final Cut

    I'm having some troubles exporting from final cut. I'm trying to export uncompressed full quality version of a short we've finished editing. When I export it as a self contained, quicktime movie, the video looks great but any of the text in the film looks pixelated and bad.
    I tried to export using the quicktime conversion option, but whenver I do that I end up with great looking text, but the video doesn't look right. I can't really describe it, but the edges of anything moving look a little off.
    I've tried making the text in livetype and importing it, as well as useing the text generators in FCP, but they both yeild the same results when exporting the final product.
    Some help please! I want good looking video, and good looking text in my exports!

    http://proapptips.com/tips/article.php?story=20050730005147133

  • H.264 export from AVCHD source results in slow-motion video; any ideas?

    Hello, I'm trying to export a 1080i project with AVCHD footage using the H.264 Bluray profile.  The resulting video looks good, but runs in slow motion.  The starting footage is AVCHD 1440x1080 (1.333).  When I export using the MPEG2 Bluray profile, everything runs fine.  Thank you for any suggestions.

    Thanks for your reply.  My source footage consists of MTS files from an AVCHD camcorder.  The files are 1080i anamorphic, so 1440x1080, with an aspect ration of 1.333 and a framerate of 29.97fps.  I used one of the AVCHD sequence templates in Premiere CS5 that matched the video files.
    I'm exorting using the H.264 Bluray preset for 1080i.  I tried several of the profiles (1080p, etc), but they all end with the same bad result.  The video plays, but seems to be playing at half speed.  My 15-minute clip takes 30 minutes to play, even though the timline in VLC or WMP reports at 15 minutes.  The audio sounds fine, but stops after 15 minutes (as it should).  It's obviously out of sync, since the video is playing at half speed.
    I have read a few other articles indicating it might be an issue with the way Premiere is interpreting the interlaced footage from the MTS files?  This is beyond my area of knowledge.
    When I encode using the MPEG-2 Bluray profile, it works fine.  The video playback speed is normal.
    My end goal is to edit my MTS files from the camcorder, encode using the H.264 profile, and place in an MKV container for playback on my XBMC-based HTPC.  I'm also considering exporting as a high-bitrate MPEG-2, then using another encoder (HandBrake, etc.) to create the x264 MKV.  Any other recommendations would be greatly appreciated.  Thank you.

  • Big problems exporting from Premiere Pro CS3

    Hey all.
    Would be massively grateful if anyone here could help me out. I'm in the process of trying to export a 23 and a half minute project from Premiere Pro CS3. I've tried exporting to different formats, (Quicktime, MPEG2, etc..) but keep arriving at the same conclusion. The process will freeze midway through, and I'm greeted by the following error messages:
    "premiere pro debug event
    premiere pro has encountered an error
    [..\..\Src\PPixHandleUtilities.cpp-114]"
    When I close that, another window pops up saying;
    "export error
    application failed to return a video frame.
    cancelling the operation."
    I'm not really sure where to go from here. Previously during the process of editing this project, I would occasionally get a message telling me that premiere pro was "running low on system memory". Fearing this to be the problem I was having while exporting, I attempted to export an extremely low quality version of the project, but arrived at the same conclusion. I also wondered if there was a corrupt frame or clip somewhere that was causing the issue, so I overlayed one whole transparent clip over the whole sequence and tried to export, but again, the same result.
    I now have to put all my faith in you Adobe Wizards! Please ask me any questions that might help you to arrive at what may be causing the problem, I'll answer them the best I can
    Many thanks!
    Andy

    >13.4GB free
    FAR too small !!!
    The program itself uses more than that for temporary working files
    Also, unless you already have a 2nd hard drive or eSata external, you are below specification
    Trying to use only ONE Hard Drive for Video Editing
    You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various parts of the hard drive to do Windows housekeeping or to load program segments for various functions
    Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle... this would be doing something with your video file at the same time as all the other work
    You as a person cannot do both at the same time with the same hand
    A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video editing
    You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708 for more) with Windows (or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything
    Partition = Crash http://forums.adobe.com/thread/957286
    I find that the three drives I use work very well for me, for editing AVCHD video... some people use a 4th drive, so video INPUT files are on drive three and all OUTPUT files are on drive four... I only bought a mid-tower case instead of a full tower case (my bad... but had to fit in the space available on my office desk!) so I use the three drives that will fit
    Depending on your exact hardware (motherboard brand & model AND USB2 enclosure brand & model AND external hard drive brand & model) AND the type of video file, you may... or may NOT... be able to use an external USB2 hard drive for SD (Standard Definition) video editing
    Steve Grisetti in the Premiere Elements forum http://forums.adobe.com/thread/856208 and Jim Simon in the Premiere Pro forum http://forums.adobe.com/thread/856433 use USB externals for editing
    A USB3 hard drive connected to a motherboard with USB3 is supposed to be fast enough for video editing (I don't have such, so don't know) but eSata DOES have a fast enough data transfer for video editing... I have not used the eSata Dock below... for reference only, YMMV and all the usual disclaimers
    http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t

  • Problem exporting from large sequences

    I'm reposting here becase it could be hardware related (the system is new), and because it wasn't answered on the CS5 forum and quickly got buried beneath 100 other threads.  There's usually more in-depth support on this forum.  Here goes:
    I'm running CS5 5.02 on Windows 7 Professional 64-bit with an X58A-UD3R mobo, i7 930, 12 GB RAM, and a GTX 470.  The footage is 4:3 NTSC DV, 29.97fps, 720x480. The sequence is DV NTSC Standard 48 kHz.  OS on C drive, media and project on E drive, exporting to F drive.
    I often put 100 clips or sometimes even 1000 clips on a sequence.
    When I go to File-->Export and start exporting video for a small work area (10 seconds or less), it brings up a dialogue box that says "Encoding Sequence 01" and doesn't make any progress for a painfully long time if there are many clips on the sequence.  The more clips in the sequence, the longer it waits before exporting.  If I isolate the same clip in another empty sequence and try to export the same small work area, it quickly exports the file.  As I add and delete clips from a sequence, the problem waxes and wanes.  When there's over 200-300 clips, I've never seen it export the video because it just sits there forever "encoding".
    I've tried this with several export formats: mpeg2, h264, quicktime, etc., with the same results.  Exporting a still JPEG will quickly work on the large sequence, but it is very slow to export video.
    It's as if Premiere is trying to encode the entire sequence first even though I've told it to only encode the small work area.  It still only exports the small work area I requested, not the entire sequence.
    Can someone please try to replicate this a few hundred clips and/or give me advice?

    Thanks for your replies, guys.
    I'm under deadline but will try running PPBM5 on Tuesday and post back here to see if you have ideas.
    There must be something wrong with my setup, because although the project runs smoothly, the exporting lags significantly even with 100 or 200 clips.  Surely CS5 should be able to export quickly from sequences as small as that.  I had no problem doing this with previous versions of Premiere Pro.
    Can anyone try throwing 100-200 clips onto a sequence to see if it causes any lag before exporting a small work area?

  • Problems exporting from premiere pro cs6

    Heeeeeeeeeeeeelp please!
    I downloaded my recent project from cs5.5 into a trial version of cs6 and now I'm getting an unknown error (problems compelling video) when I try to export my project (in H.264).
    I tried shutting off the auto safe, exporting in a different format (quicktime), restarting offcause, removing effects from the clip where the export failes, even tried exporting without that particular clip, but then it just happened another place in the film at another clip.
    I'm thinking there could be an export limit when you're only working with the trial, cause I have been able to export smaller bits of the timeline and as well other smaller projects. I'm a mac user and not that good at computers in general.
    I can still export a early version of my project from cs5.5 but I would really love to detect the problem in stead of starting all over since it's my BA project and I'm on a deadline...
    I really hope somebody know something helpfull

    I been in this same situation for two weeks. First update your software to the latest update. Just released yesterday
    I believe you have more than one clip. At the end and begining of the clip you should have little grey triangle shape. They are called handles, meaning extra space at end point and at begining. Usaually for transition. If you dont see it on both clips (as in picture) then the one clip which is misiing need to be trimed little or more until handles disappear or some time you see full triangle (as in picture). Do same if there are more. Then just try to export the ending where clips attach each other. Set in and out points as I did in the picture. Export and make sure to choose sequence in and out setting. here is the picture:
    I hope it works. I dont use this software anymore. I had a trail version. Used for two weeks. Every day same problem then finally figured it out and moved back to Edius 6. Thanks

  • Problems exporting from iphoto to SD card

    Hi
    I'm trying to load up an 2gb SD card for a digital photo frame.
    I think this problem is more to do with the sd card than the iphoto, but maybe someone knows the answer
    I've exported the photos from iphoto and it says there is 600mbish of photos, but when I load it onto the sd card the sd card says that there isn't enough space when blatently it's saying that there is 1.87gb left on the bottom of the window.
    can anyone help?
    thanks
    victoria

    Victoria:
    Here's a suggestion that might help the digital frame transition from one photo to another more smoothly and quickly:
    1 - determine the pixel dimensions of the display area on the frame.
    2 - put all of your photos to be used into a folder as Terence suggested.
    3 - download and run Resize! on the folder to resize the photos to the frame's dimensions. Use the following settings:
    Quality Level: I use 60%. IMO that's plenty for the resolution of the frame I have.
    Box Resizing: Maximum width: width of frame
    Maximum height: height of frame
    4 - Click on Go.
    This will create a new folder with the resized photos in it. You can rename that folder it will have the pixel dimensions attached to the folder name and copy it to the SD card. I found that this increases the smoothness and speed of the transitions between photos.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • AME Export from HDV source: Pixel aspect ratio squeezed in Queue; ok in direct export.

    I have some existing HDV footage that was converted to Cineform codec (CFHD) in an .avi file that I need to export.  My target requires Windows media format (.wmv Window Media video 9).
    My output settings are the following:
    640x480, square pixels, 29.97, lower, VBR, 2 pass unconstrained, 800 kbps.
    When I export these files in a sequence directly from Premiere Pro CC (Export button), the pixel aspect ratio looks correct. (It looks ok in Premiere and in the Premiere Export window, too.)
    When I export using the Queue button in Premiere to AME CC, the video renders out squeezed, as if the aspect ratio is ignored.
    I can also see the squeezed video in the AME preview window when the file is rendering.
    This worked OK previously in Premiere 5.5.
    Is there a setting that controls this and allows normal rendering from the Queue?
    Using the Queue is much preferred to avoid bottlenecks in workflow.
    System: Windows 7 enterprise 64 bit, Lenovo W510, Core i7, 16GB ram.
    Nvidia Quadro FX 880M
    Premiere Pro CC: 7.2.1(4)
    Adobe Media Encoder: 7.2.0.43 (64-bit)
    Not sure if I am using the Mercury Playback Engine GPU Acceleration.
    Thanks.

    I'm using CC, updated today. (see system info at top).
    I'm starting to wonder if the codec info is not read correctly when using the Queue (Cineform codec).  I took your suggestions and created a new sequence with one clip and used the same settings.  I opened the export settings window in two separate ways:
    Export settings in Premiere (Ctrl M). All is good in the Source tab. PAR is interpreted correctly:
    I sent the export to the queue, and from the job in AME clicked the "Custom" link to retrieve the same settings window.
    However, the Source video PAR is not interpreted correctly:
    This must be related to why the render from the AME queue is not correct.

  • Audio Synch Problem Exporting From imovie 6

    I have a created a large imovie project in imovie 6 using pictures and imported video.  The project uses a lot of extracted audio voice overs on top of the photos. 
    While trying to export the video to quicktime or idvd, the audio gets out of synch at various points.  I have tried exporting it many times using a variety of different options, and the audio remains out of synch, sometimes in different places with each export.  Lastly, I have extracted the audio from the video clips for some of the more problematic portions of the project, but that has not proven successful.
    The odd thing is that the movie plays perfectly while in imovie.
    Any suggestions as to how to correct this issue?

    Hi
    Tedious situation.
    To avoid this I'm kind of strict in Audio in two ways
    A
    • Material used if video is in same frame per minute - else I use JES_Deinterlacer to convert all to one standard. I use PAL = 25fps - one of my Cameras records ONLY in 30fps - (some people records in 24fps - to get a movie feel - I never)
    So keeping the fps from Camera to (in my cases) DVD - gives a supperior result
    B
    • I'm strict in the kind of Audio formats I use - ONLY .aiff (or from miniDV tape Cameras) AND THEN 16-bit 48kHz or from Audio-CD (still .aiff as on normal CDs) and here 44.1kHz
    If Camera is set to record in LP-mode or 12-bit Audio - Then I use an external Audio Editor to get this right
    If from iTunes - I never use this directly - BUT - collect needed audio into a New PlayList - BURN THIS as a Standard Audio-CD (NO .mp3 - but .aiff here too) and then use the files on this CD in my movie project's in iMovie HD6 or FinalCut any varsion (or if forced to - iMovie'11)
    Else read this
    Audio Sync problems
    • 12.bit - should be 16.-bit (from miniDV tape - set Camera right)
    Avoid recording in LP-mode on miniDV tape. This tape must be play-backed by same Camera. When Camera dies
    so does the video material in worst case.
    • .mp3, .avi etc strange file formats - should be converted to .aiff 48kHz 16-bit
    • in iMovie (up to HD6) - do - Extract Audio - it most often helps
    • from iTunes - collect into a PlayList then Export out as an Audio-CD (not .mp3) and use the files on this (.aiff 44.1kHz)
    • There seems to be a problem with slow-down resp speed-up. Has to be in specific steps as 25% 50% 150% 200%
    else problems will arise
    • Audio problems when transitions is in use - especially iMovie HD/HD6
    a. Select video clips
    b. Extract Audio (Advance menu/Extract Audio)
    c. Now apply transition
    d. eventually fine-tune end and start of extracted audio clips
    Yours Bengt W

  • EPub Validation problems, exporting from InDesign

    I've exported my indb file as an epub. When I run the epub through epub check I get three of the same error in three different chapters.
    element "div" not allowed here; expected the element end-tag, text or element "a", "abbr", "acronym", "applet", "b", "bdo", "big", "br", "cite", "code", "del", "dfn", "em", "i", "iframe", "img", "ins", "kbd", "map", "noscript", "ns:svg", "object", "q", "samp", "script", "small", "span", "strong", "sub", "sup", "tt" or "var" (with xmlns:ns="http://www.w3.org/2000/svg")
    I can't figure out what it is in these chapters that might be causing the error. I have 29 chapters in the entire book and there is nothing about these three chapters that appears different from the rest. Does anybody have any ideas on how to fix this error?
    Thanks so much for your help.

    The two best references:
    * Elizabeth Castro's eBooks on EPUB preparation from InDesign:
    http://www.elizabethcastro.com/epub/
    * Anne-Marie Concepcion's videos at www.lynda.com
    (If Bob Levine shows up he could give a link for a free week, but he's pretty busy with the results of Sandy in NJ.)

  • Problem exporting from final cut pro to compressor

    Hi,
    I'm trying to export to compressor from Final cut pro, but every time i do so, I keep getting the same error message 'Selection contains no media' but it does. It will export to Quicktime fine. I'm only trying to export to compressor so I can save it as an mp2 file.
    I'm using FCP V5.0.4
    Compressor V2.0.1
    Mac OS X V10.4.8
    Also on previous versions of FC I could output to Mp2 and it would include the chaper markers, my last sucessfull project, it did not.
    Any help would be greatfully recieved.
    G5 Single Processor 1.8   Mac OS X (10.4.8)  

    Philip:
    Check this old thread:
    http://discussions.apple.com/thread.jspa?messageID=1106846&#1106846
      Alberto

Maybe you are looking for