Problem exporting graphics

Hi everyone,
I have had a reoccurring problem with my latest FCP projects when I export them through Compressor to DVDSP. My opening title is centered on the screen; my closing title is left justified. Everything is rendered and looks fine in FCP but when it gets to DVDSP, all the graphics are left justified. Any ideas on this? Not sure where I'm running into the problem... FCP, Compressor, or DVDSP.
Thanks for your help.
Lucy

This was answered in the FCP forum.

Similar Messages

Problem exporting graphics to XML - dpi vs. impsize

Hi,
FM 7.2b128, exporting XML using schema.
I've had a structured app that I've used for a while that exports an impsize attribute (which I want) and does not export the dpi. The read/write rule is:
element "image"
is fm graphic element;
attribute "impsize" is fm property import size;
attribute "impby" is fm property import by reference or copy;
attribute "sideways" is fm property sideways;
attribute "impang" is fm property import angle;
attribute "xoffset" is fm property horizontal offset;
attribute "yoffset" is fm property vertical offset;
attribute "position" is fm property position;
attribute "align" is fm property alignment;
attribute "cropped" is fm property cropped;
attribute "float" is fm property floating;
attribute "width" is fm property width;
attribute "height" is fm property height;
attribute "angle" is fm property angle;
attribute "nsoffset" is fm property near-side offset;
However, I've been making some schema/EDD updates and other changes and suddenly impsize is no longer exported, only dpi. I can't figure out anything I might have changed to cause this to happen. In the documentation, it suggests that I should put in a "specify size as" rule, so I did that, but I still can't get the impsize back unless I put in a rule to drop the dpi, such as:
element "image"
is fm graphic element;
writer facet default
specify size in in;
attribute "impsize" is fm property import size;
attribute "dpi" drop;
attribute "impby" is fm property import by reference or copy;
attribute "sideways" is fm property sideways;
attribute "impang" is fm property import angle;
attribute "xoffset" is fm property horizontal offset;
attribute "yoffset" is fm property vertical offset;
attribute "position" is fm property position;
attribute "align" is fm property alignment;
attribute "cropped" is fm property cropped;
attribute "float" is fm property floating;
attribute "width" is fm property width;
attribute "height" is fm property height;
attribute "angle" is fm property angle;
attribute "nsoffset" is fm property near-side offset;
So, is this is working, but is it the right way to do it? Did I just get lucky before that impsize was exported instead of dpi?
Thanks,
Russ

For what it is worth...
I do not do much XML exporting, but started a project that needed it. I am creating an XSLT to convert the exported XML into HTML for a company intranet. I also noticed that I could not get Frame to export the impsize instead of dpi. I also tried the specify size in command, which did not work. I did not think to try dropping the dpi. Thanks for the suggestion.
So, this is not a question, but just to confirm that Frame is not doing what its documentation says it should. Maybe this is another bug that got overlooked in the testing.
(For the record, I DID discover a change in the way things work that DID get corrected in the last update. It would be nice if Adobe acknowledged these misbehaviors and let us know that they are trying to fix them.)
Van

Resolution problems exporting to DVD

I am brand new to FCP 5 and everything I have learned has been within the past two weeks. I have read MANY posts on resolution settings, square pixels vs. retangular pixels, iDVD problems, exporting problems, etc. However I have not found an answer to my problem, but many helped.
I am currently trying to project video from a DVD. The projection needs to be an EXACT size. After exporting and viewing with projection in QT Fullscreen, the video is exactly what I want.
However, when I burn a DVD using iDVD and project it from a DVD player, the projection is slightly stretched horizontally. Why is that?
The sequence is originally from HD and the export settings are -
-Frame Size: 640x480 (4:3)
-Pixel Aspect Ratio: 1440x1080
-Exported using QT Conversion NO COMPRESSION
(There are many other combinations of frame size and pixel aspect ratio's that also work initially, but they project with the same problem.)
I had to have missed something.
ANY suggestions are greatly appreciated.
Eric
Power MAC G5 Mac OS X (10.4.7)

The footage did come from an HDV from Sony.
I use QT Conversion because if I export it as an QT Movie, the video is distorted. However, when exported through Quicktime conversion/quicktime movie/no compression, the movie is exported in the correct dimensions, though the DVD play back issue still persists.
I am running off of iDVD v 5.0.1 and could not find a place where I could choose a 16:9 option, if that is what you meant.
The sequence does include a PSD mask which was imported as a Layered Graphic Sequence. That shouldn't have any impact on the burning issue though.

Problem exporting to gif

Sorry for my English! I have a problem exporting to .GIF all the animation is in the Movie. Ascorroded Movie .GIF to see the layers. Help me

Go to file and export for gif but it will not sure it retain all of them on the stage as a gif animations. becoz we have more contents like movieclips, nested animations and controls.

I am having problems exporting my time lapses from quick time pro i need to save my files as photo jpegs but the standard video compression window will not open fully,

i am having problems exporting my time lapses from quick time pro i need to save my files as photo jpegs but the standard video compression window will not open fully, it just keeps my mac (old 1.6Ghz 2.5 GB sdram G5 still good for most stuff i need) spinning for ever but i can see compression type H.264 selected and the other setting but i can not select any other options as it still thinking but never opens! why is this happening how do i get round it?
my work flow is: 300 images shot on a 5d mark II medium jpegs opened in Light Room cropped to 16:9 then exported and opened in quick time i can save a .mov H264 giving me files sizes of 14 mb for a 16 second time lapse, mp4 9 mb. the only way i can get large files is saving as a self contained movie then i get 300mb files.
i need to save my files 1920 x 1080 photo jpeg codec as i want HD quality.
i am sure there is a simple way round this?
thanks guys!

It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
How large is your hard drive and how much hard drive space do you have left?

Hello everybody, is anybody else having problems exporting music to their iphone 4's from their itunes 10.6.1. (7)?

hello everybody, is anybody else having problems exporting music to their iphone 4's from their itunes 10.6.1. (7)? i sure am. somehting is way differant. i used to be able to simply drag, and drop albums, artists, and entire genres to my phone without a worry. now i drag an album to my phone, and it will only add a couple of the songs. so i drag and drop again, and maybe even a third time to get all whole album on there. oh, and the album artwork is a no-show. i dont know what i'm missing. it's sure not what i'm used to. anyways, i'm new to this support community deal. thank you in advance for any help.
much respect,
tommy bravo

After further testing, I noticed that iTunes not only becomes totally unresponsive but will start using all the CPU until I kill the process. After restarting, it works again for a while and then it dies again...
Luis

Indesign CS5 crash during startup - problem with Graphics.rpln

I work in an architectural company and already several of our computers have experienced this very rare and unusual behaviour. During start up of Indesign (not clicking on any file but just launching Indesign) it crashes with the following error:
"Adobe Indesign CS5 has stopped working"
We use Windows 7 64bit, so the first step I did - I went into Application Log which says, so appears to be a problem with Graphics.rpln.
-=-=-=-=-=-=-=-=-=-=-===-=-
Fault bucket 1848500921, type 1
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: InDesign.exe
P2: 7.0.0.355
P3: 4bad00be
P4: GRAPHICS.RPLN
P5: 7.0.0.355
P6: 4bad03d3
P7: c0000005
P8: 0004e1e2
P9:
P10:
Attached files:
C:\Users\User\AppData\Local\Temp\WER162E.tmp.WERInternalMetadata.xml
These files may be available here:
C:\Users\User\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_InDesign.exe_b042 ec9a818cb8fb57eefe0aacb41c22fdcbb8_10c12aa8
Analysis symbol:
Rechecking for solution: 0
Report Id: 9e59fc2c-5b68-11e3-908c-f46d0497fc9b
Report Status: 0
-=-=-=-=-=-=-=-=-=-=-===-=-
I have tried everything I could think of - removed and reinstalled Adobe CS5, manually removed Adobe folders under %Appdata%\Local and %Appdata%\Remote folders (why can't Adobe delete those things during uninstallation is always a total mystery), changed video adapter drivers, cleaned Temp folders, everything I knew...
None of the other apps like Photoshop or Illustrator CS5 malfunction - only Indesign. What is going on?
Can it conflict with other software we use? We have Bentley Microstation, 3D Max, Office 2010, Kaspersky Antivirus and LOGMEIN installed on this computer...Any clues, guys?

Looks to me like you've never installed any of the patches. Last patch for CS5 was 7.0.4, so I'd start with that and see if ti helps.

Exporting Graphical Message Mapping in PI 7.1

Hi All,
In XI3.0 there was an option to export graphical message mapping by using ctrl+shift on the data flow editor window. Can't find the same in PI7.1.
Have SAP removed this feature with PI 71 or provided another way of doing it or simply my system is acting wierd?
Regards,
Rahul

It worked when I did Ctrl+Shift and numerical 0 from horizontal numbers of my keyboard, some how doesn't work with numbers on right side of the keyboard(Numlock was On)
It is wierd.

PDF quality problems exporting from InDesign and Photoshop

Hi There.
I'm having big problems exporting my InDesign files to PDFs and retaining the res. And it's not just the images (I understand about the dpi) it's the type on there too.
I have been exporting as the preset High Quality Print - is this wrong. Are there other settings to ensure the PDF I export retains the high-res quality and clarity?
At the moment it comes out high-res when I export it as a jpeg or eps but not PDF.
I have also noticed the same problem when I export to a PDF from Photoshop.
I really need to create interactive and high quality print PDFs from my InDesign files.
Please can you advise.
Thanks
Karen

I am also having problems with pdfs exported from Illustrator and Indesign recently. I didn't have these problems before, so I don't kno if something has changed in my settings that I am unaware of.
When I use the 'japanese dots' border in Indesign, it shows on the pdf as a kind of dotted line. I'm exporting as 'High Quality Print'. I switched to Illustrator and drew a line with the pen tool, and converted it to a dotted line; it looked just how I wanted in in Illustrator, but as soon as I exported it, the same thing happened.
I have used the 'japanese dots' border in the past, exporting as 'High Quality Print', and not had this problem.
Does anyone have any suggestions?

Problems Exporting to Excel in Acrobat XI

I have some problems exporting a PDF to excel in Acrobat Std or Pro XI but not in Acrobat Std or Pro X. When exporting in X all the columns and rows are created as they should be, but in XI everything is slammed to the left in one column. Has anyone experienced anything like this and is there maybe a setting that I am missing in the conversion process that was automatic in X but is not in XI?
Thanks in advance for the help.

I am having a similar problem. I used the 30 trial acrobat XI and it exports pdf to excel perfectly. However, after buying and installing the program, the export is all messed up with data not in correct columns...etc.
Acrobat tech controlled my computer and experimented a bit. He said that my pdf was created by a 3rd party application called crystal reports and that acrobat doesn't work on about 50% of these 3rd party creations. I said, then why does the trial work so well. He said there is nothing different between the trial version and the actual purchased version. This cannot be true or something else is up. I told him I wanted to uninstall my purchased program and reinstall the trial version just to prove it to him. He said it would not allow me to reinstall the Trial.
After my phone call was over, I did it anyways. It did let me reinstall the trial version. I took 7 pdf sent to me from work from each server (wanted to make sure one of my servers was not sending different types of pdfs). Each pdf did not convert successfully when I used my purchased version. Then I uninstalled and reinstalled the trial version. The trial version successfully exporting my pdf to excell (all 7 of them). Something weird is going on.
Any insight would be appreciated.

Problem Exporting / Importing print forms with program RSTXSCRP

Hi!
there is problem Exporting / Importing print forms with program RSTXSCRP.
when I transfer print form from one SAP system to other, logo image and some text is missing... what could be the reason?
Maybe there is other way to transfer print forms between SAP systems without using program RSTXSCRP?
Will reward,
Mindaugas

Hi,
when you transfer print forms from one sap system to another, logos are not transfered automatically. these are actually .bmp files which need to be existing in every client. then only when you run your print program logo can be seen in your print output. hence logos need to be created explicitly in every client where you want to run your print program.
thanks,
sksingh

Problem exporting using Compressor in FCP?

I had a problem exporting using Compressor in FCP and then I found an interesting article from Apple:
http://support.apple.com/kb/TS1099
but it doesn't really explain the solution. What steps do I need to take exactly in Compressor to make it work?

James M. has it right. Convert the MP3 and the WAV files to AIFF, 48khz, 16 bit and use those in your Sequence. You might even have to convert the existing AIFF file(s) if they aren't 48khz, 16 bit.
Once you've edited the new files into your Sequence, do an Audio Mixdown, then export.
-DH

Problem exporting uncompress AVI

Problem exporting uncompress AVI. The output file will have in-between frames that appear like this:
Help!

Thanks for response! It's not the player's problem (it's mpc btw), I import it into Premiere for post editing and it's disaster to see the failed rendering.
Mmm need time/Everest to find out the system info. Generally render setting is just straightforward AVI lossless/best quality with no codec assigned.

Export Graphic w/Transparency, CS6 Server, Fail

I have a script that loops through all graphics inside an adobe indesign document. The script senses what type of graphic file it is (JPEG, TIFF, EPS, PSD, etc), and, based on some simple rules, the graphic will get exported as either a JPEG, or a PNG.
For source graphics that have the POTENTIAL to have transparent pixels in them (TIFF, EPS, et al), the export format is set to PNG. For all others, the export format is set to JPEG.
This has been running quite well for some time now, until I switched over a development server to CS6. It was just discovered, this morning, that graphics w/transparent pixies get exported as a PNG, but, where my transparency USED TO BE, I now see a big ugly piece of white. It's terrible.
I've scoured the documentation looking for an answer. Suprisingly, I see a new batch of PNGExportPreferences that I didn't have available to me in CS5.5, but, none of these seems to do the trick. The one that stands out to me is app.pngExportPreference.transparentBackground = true. The documentation for this property is a bit ambiguous in my particular use-case, and, sadly, doesn't seem to do the trick. I'm still seeing a big ol' white blob where I would expect to see transparency.
The basic syntax for what I'm doing is:
d.allGraphics.each(function(graphic){
graphic.exportFile(ExportFormat.PNG_FORMAT, "graphic.png");
Ideas?

NEVERMIND. I am an idiot. The script is running fine. the .transparentBackground setting IS the trick. I just completely FAILED to remember, until now, that MS's paint program cannot handle transparency. I was viewing the exported graphic in Paint. SUCH an idiot.

Problems exporting as pdf

I am having problems exporting a multipage website as a working pdf. I get a dialogue box stating that there are incorrect parameters. I am using Mac OS 10.5. Any help would be appreciated. Thanks. Carrie

Hi Peter,
First off, thanks for your help & follow up.
I guess I'm having trouble actually installing the abracadabra Automator script. I downloaded it, unzipped it and attempted to open it in Automator and received the following errors.
From there, I thought it may have been installed. But I'm still having some problems. According to the site the next should be " save it as a module via the menu File > Save as module > Finder module . It will then be available by right-clicking on any icon Finder via the sub-menu> Automator > PDF-Assembler ."
Forgive me for my cluelessness, but I'm not sure where to go from here.

Problem exporting graphics

Similar Messages

Maybe you are looking for