Problem exporting my projections

exporting the projection of my photos, Lightroom 5 always stops at 10% of the process. I've tried numerous times and always stops at this 10% progress of the process. What can I be doing wrong?

There is a difference between capture sharpening and output sharpening. The general idea is to get the image just sharp in Develop (but not over sharp) and then apply output sharpening as you export the photo (click image below).
Try exporting a jpeg or tiff from your raw file and use the type of sharpening depending on your purpose e.g. for printing choose the paper type and level of sharpening. If the image is to be used on a website, blog or for sending by email; use screen sharpening.

Similar Messages

Project manager - problem exporting a project with AE compositions.

I have a problem exporting my project to another disk, this is what happens:
I needed to move the project from the windows partition of my Mac to the Mac partition, in order to be able to continue my edit under MacOS, my sequences include a series of After Effects compositions of footage that has been stabilized in warp stabilizer using the option "replace with AE composition" from the timeline.
Using the project manager I started my backup operation, with these options:
Source: all sequences selected
Resulting Project: Collect files and copy to new location
Include Audio conform files
Destination: a folder in the Mac partition
The resulting project had a message popping up saying that AE rpject file is missing (it was, I had to manually copy and paste it from ithe win partition to the mac) and once copied obviously AE couldn't find the source video clips of its compositions, so I had to manually re-link them all (quite difficult job to do among almost two years of footage).
What have I done wrong ?
Why AE lose the connection with the fils?
Thanks

Thanks Jim,
I understand that Adobe Anywhere solves this, but there should be this fairly basic functionality (which exists in Avid and FCP) in a non-enterprise edition of the software. I have submitted a couple different feature requests about this, going back to CS5, so hopefully enough people make similar requests for a fix to be implemented. Adobe Anywhere is really not a solution for our small shop as currently configured/priced, especially when we can have editors working remotely with very affordable USB 3 drives. The only hangup is the markers, which just isn't worth a 5 figure fix. As such it's hard to consider the problem solved for either us or any small shop or post crew.
Best,
Jon

Exporting DVD projects back to Sony DCR PC1000 camera

Good evening Apple community
I've been having problems exporting finished projects back to my camera. Sometimes it works, but mostly it gets stuck. Is it possible to export back to an external dvd hard drive recorder? The model I have is a Pioneer DVR 520H.
Do I have to set the iMovie preferences to play back through the camera and then just hit the record button on my dvd recorder?
Appreciate any help.
PG

I have been reading alot of posts in here, and dan slagle seems to be the most quoted person for imovie questions. Check other questions you will find the full address for danslagle.com

MDSD : Problems in exporting Enhancement Project

Hi Experts,
I am having some problems in exporting the Enhancement MDSD project.... Please see the detailed description below....
Firstly I created a Standard MDSD project from MDSDSRC.zip file, then I created an Enhancement project from MDSD.jar file.. while creating this enhancement project I have included Standard project in it under Java Settings -> Projects & add project..
exporting the project in ..
1st way-
Project Right click -> Export -> Include Enhancement & Standard project under
"select the resources to export" -> choose checkbox - "Export generated class fiels & resources" & "Export java source files & resources" -> Next -> Next -> Select "com.sap.dsd.appctrl.DSDMain" in select the class of the application entry point -> Finish.....
It gives me errors as mentioned below..
1. Problem writing /MDSD_S1/java/ProjectConfig.properties to JAR: duplicate entry :     ProjectConfig.properties
2. Problem writing /MDSD_S1/.classpath to JAR: duplicate entry :    .classpath
3. Problem writing /MDSD_S1/.project to JAR: duplicate entry :    .project
2nd way-
Project Right click -> Export -> Include Enhancement & Standard project under
"select the resources to export" -> choose checkbox - "Export all output folders for checked projects" & "Export java source files & resources" -> Next -> Next -> Select "com.sap.dsd.appctrl.DSDMain" in select the class of the application entry point -> Finish.....
It gets exported properly but then when I replace that MDSD.jar file in
"C:\Program Files\SAP Mobile Infrastructure (C)\lib" folder with the standard MDSD.jar file which comes from SAP & run the MDSD application from mobile client it gives me an error as mentioned below..
java.lang.NoClassDefFoundError: com/sap/mbs/tools/signature/SignCanvas
Here i got some weird thing....
The standard MDSD.jar file based on which the MDSD application works has com->sap->mbs,uxe,tc,sxe,spe,mbs,dsd packages present whereas the enhancement project which I created from this same standard jar file & exported it has only dsd package. So this exported jar file doesnt include above mentioed SignCanvas class and hence its giving me an error.
Pls guide me further in this issue....
Thanks in advance....
Rajesh
Edited by: RAJESH SHINDE on Apr 8, 2009 11:21 AM

Hi Rajesh,
I think you are trying to enhance the MDSD 3.0 application. And the SignCanvas which you are mentioning is present in the mbs folder of the of the standard application jar. As you have told below if the jar you have created doesnot have these packages, the mentioned issue is happening.
Regards,
Vishwanath
Edited by: Vish on Apr 22, 2009 9:09 AM

WIll I have duplicate problems when I Export / Import Project?

This is my first try at Exporting / Importing a Project to benefit from having Aperture on the road on a MacBook.
I run a secondary instance of Aperture on my MacBook with a managed library. I used it last week to rate, and adjust 40 images from a shoot while on the road. Those images are in Project ABC. My objective is to not lose all the adjustment work done while away now that I wish to re-locate these images to my primary instance of Aperture which runs on an iMac. I won't need them any longer on the MacBook.
I've exported Project ABC, and it's now sitting on the desktop of the iMac ready for import into Aperture where the library is also managed.
Between the shoot and today, however, I had uploaded the same images from my CF card to the iMac's Aperture library into Project XYZ. No work has been performed on any of them, but the image names are identical to those in Project ABC waiting to be imported.
My plan is to import Project ABC, and, assuming everything comes over in good shape, to delete the unadjusted masters/versions in Project XYZ one by one.
Question 1: When image GEN_1234.nef with all its adjustments, etc., contained in Project ABC, is imported, will Aperture have a problem that GEN_1234.nef (unadjusted) already is in the library in Project XYZ?
Question 2: I've checked the MacBook after exporting, and Project ABC looks as though nothing ever happened. Does this sound right? I'd expected the Masters to be gone, but "M" toggles between the master and the adjusted version.
Thanks.
Terry

Problem #2 is not a problem. We have been able to somewhat install Oracle when those warnings appear. The client install works fine with those warning messages in the terminal window. NOTE: They are just warnings...

Export/Import Project problems

I have two machines: a PowerMac (G5) and a MacBook Pro (Intel Dual Core). Both 2GB RAM, running OS X v10.5.6 and Aperture 2.1.2. (More tech spec info available if anyone thinks it relevant).
I have built up a project on the MacBook Pro, creating albums, creating stacks and making picks within the stacks, making adjustments to each of the picks and then creating a book.
I now want the project on the PowerMac G5, which is my master machine and contains all my other projects.
On the MacBook Pro I exported the project and then copied the resulting .approject file to the PowerMac. I then imported the project into Aperture from there. On a cursory scan, everything seems fine and in the Projects Inspector it shows 1376 images against the project on both machines. However, if I look more closely, I've lost all my picks. I.e. I need to go through every stack again and reselect my picks (very boring).
It gets worse when I look at the Book within the project - it's lost the positionings (i.e. I double clicked on the image and moved it around slightly to get the best crop for the selected box shape). And then I did a Close All Stacks and it deleted every picture from the book so all 60 pages were empty again and the images were all back down in the film strip!
At this point, my immediate thought was the .approject file got corrupted during the copy, but I've done a recursive diff (diff -qr fileA fileB) between the file on the MacBook Pro and the file on the PowerMac and it reported no differences at all.
Has anybody else had similar problems? Is the project import/export known to be flakey? Better yet, anybody know of any workarounds?
Thanks in advance for any help anyone can offer.
Darren

OK - I've tried eliminating some of the variables and it turns out the two-machines-issue is a bit of a red herring and this is a straightforward Export/Import bug in Aperture.
On a single machine (2.16GHz Intel Core Duo MacBook Pro with 2GB RAM, running OS X 10.5.6 and Aperture 2.1.2 (build 3G13)) I have a project with many images. I create versions of these images and apply adjustments (Sharpness, Monochrome Mixer, Exposure, Enhance, etc.). I then make the adjusted version the Pick and I've created a 62 page book from these Picks.
Now I export the project (i.e. in the Project Inspector I right-click the project and choose Export > Project). I export the project to a file on the desktop and rename the existing project in Aperture. I now import the saved .approject file and I find that all my (long and carefully chosen) Picks are no longer Picks. (I've tried this a few times and ruled out the possibility of a corrupt export file).
As a result, when I select the Book I get the "Non-Pick Images" dialog with the dreaded "One or more placed items are no longer the pick of a stack." message.
I have two options at this point: "Use Current Pick" ruins the book - I have to go through and work out all the picks again (and also re-pan all the images within the Photo Boxes as this data has also been lost).
Or I can choose "Create new Version", which appears to preserve my book's original look (I haven't looked in too much detail yet), but my project now contains a couple of hundred more images than it used to (or at least extra versions which, whilst I know these are relatively 'cheap', are still unnecessary) and this still doesn't help with my other albums and light tables, which still have incorrect images shown as the Picks.
I'm finding this quite a worry - I originally hesitated to move my photo library into Aperture due to the thought of losing the metadata one day if I moved from Aperture to something else, but in the end I decided to trust that something as simple-to-test as Export/Import would get properly implemented - now I'm beginning to fear that it doesn't even within the same version of Aperture, never mind different versions of Aperture or (heaven forbid) different applications altogether

When I Try To Export My Project, Nothing Happens

So during editing in Final Cut Pro X I noticed that there were a couple of hiccups in my movie, but scrolling over these events didn't reveal a problem. I decided to see if it was a processing problem by exporting my project. I went up to File, clicked on Share, clicked on Apple Devices 720p, clicked on Next in the window that came up, titled the project, set it to save to the desktop, clicked Save... And then nothing happened. I checked my desktop for the file but there was nothing there. I've tried saving the file to several different places but when I click Save nothing happens and the file isn't in the place it should be if it had been saved. FCPX is working fine in all other regards but it's just not exporting this project. I've checked and I don't have any broken pieces of footage. The only possible thing I can think of is the song I'm using is one I purchased off of iTunes, so maybe it won't let me export if the song is protected by iTunes, but that seems like a stretch. Any help is appreciated.

Nevermind, I solved the problem. FCPX isn't showing me that it's rendering or whatever it's doing, but after about ten minutes the files show up. Still, any idea why it gives no indication that it's working?

Unable to Export iMovie project in everyway I have attempted for the past 2 weeks. Please Help! Due date coming up!

I've unable to Export iMovie project in everyway I have attempted for the past 2 weeks.I have a late 2012 iMac with 8gb of RAM and 700 gb of free space on the hard drive. The video I am trying to export is 48 mins long with most of the source footage from a NIkon D3100 and several other cammcorders. I've been exporting with Apple Intermediate codec because that was the only one that has work so far but it only worked once and since then I have had to make changes to the project and now I'm unable to get it to work. For all Quicktime exports in H.264 or AIC (my prefered format for this export since I figured it'd offer the highest quality when I import it into Encore for making a dvd out of it) Which just stops exporting in the last few minutes without explination as to why or it crashes and quits. It either leaves a partial file or nothing at all. When I do "export movie" I get a "not enough memory Heap zone error"
I don't know what to do any help would be greatly appreciated!
By the way I happen to have Adobe CS6 Production Premium but didn't know how to use it as well when starting the project and now really regret not using it because it appears to be 10x more stable and capable of handling all the tasks I want it to do.

Hi
Error -108 memFullErr Ran out of memory [not enough room in heap zone]
Turn off - TimeMachine usually works - re-try.
(the Application down in the Dock - not the Device)
But this can mean many thing's - My first thought is
Free Space on Start-Up hard disk. How much ? (other disks do not count)
AppleMan1958
Are your event clips in h.264? If so, you can solve this by Right clicking on your Event Name and choose "Optimize Media". You can choose Full for 1080P or Large for 960P according to your preference.
After you have optimized your Event, you should be able to Share with no problem.
Lennart Thelander
-108 mean you are running out of (free) RAM.
Try restarting the computer just prior to sharing. That frees up RAM.
from mynameisearl
Final Entry
Ok - after much cutting, trial and error and days of work I have never really established a root cause for the -108 error. Nothing I did resolved the issue to the orginal project.
The only work around I have found is to split the Original Project into two.
What I found was that anything around the 60 mins mark and above just failed to render in HD and showed the -108 error.
What worked for me was creating two project files - one around 57mins long - the other a part 2 - around 17 mins long. All using exactly the same source clips, photo's, music and transitions as the orginal.
This now works. I guess having it split in two makes it a little easier to work with as I wont have to keep rendering the first part which does not change but really wish Apple would throw some light on this.
Anyway - I hope all of the above at least proves useful for others.
Good Luck

Export/Import Project still buggy in v2.1.3

After seeing the update notes for v2.1.3 and noticing references to project importing, I started to get excited that maybe the bugs have been ironed out. Unfortunately my longstanding bug still remains.
If anyone can think of any workarounds I'd be extremely grateful...
I have a 2.16GHz Intel Core Duo MacBook Pro with 2GB RAM, running OS X 10.5.6 and now Aperture 2.1.3
I have a project with many images, arranged into stacks, a pick in each stack with many adjustment and a 62-page book created from these picks. There are also some smart albums and a light-table.
Now I export the project (i.e. in the Project Inspector I right-click the project and choose Export > Project) to a file on the desktop and rename the existing project in Aperture. I now import the saved .approject file and I find that all my Picks are no longer Picks and my book is therefore no longer made up of my desired images. (I've tried this many times now and ruled out the possibility of a corrupt export file).
As a result, when I select the Book I get the "Non-Pick Images" dialog with the dreaded "One or more placed items are no longer the pick of a stack." message. "Use Current Pick" ruins the book - I have to go through and work out all the picks again (and also re-pan all the images within the Photo Boxes as this data has also been lost). "Create new Version" appears to preserve my book's original look, but my project now contains a couple of hundred more images than it used to and my other albums and light-table still have incorrect images shown as the Picks.
Does anybody have any ideas of what I can do to ensure the stack-picks are preserved during the export/import process?
(By the way, the reason I'm exporting and then re-importing is because I actually want to do the export from my laptop where the project is and then the import on my main work machine where the rest of my Aperture library lives, but that fails for the same reason, so I'm doing the export+import on my laptop for now to reduce the number of variables in the problem.)

I go with the assumption that you now know how to create transport sets. After having created a transport set containing the objects you want to be exported, go to the administer tab under the main page of portal. There you will find the Export/Import portlet. Here you need to choose your transport set from the first LOV and then click EDIT to choose the "Security Option". Now you export out the stuff. This will export all the user page customizations for you.
Thanks.

Resolution problems exporting to DVD

I am brand new to FCP 5 and everything I have learned has been within the past two weeks. I have read MANY posts on resolution settings, square pixels vs. retangular pixels, iDVD problems, exporting problems, etc. However I have not found an answer to my problem, but many helped.
I am currently trying to project video from a DVD. The projection needs to be an EXACT size. After exporting and viewing with projection in QT Fullscreen, the video is exactly what I want.
However, when I burn a DVD using iDVD and project it from a DVD player, the projection is slightly stretched horizontally. Why is that?
The sequence is originally from HD and the export settings are -
-Frame Size: 640x480 (4:3)
-Pixel Aspect Ratio: 1440x1080
-Exported using QT Conversion NO COMPRESSION
(There are many other combinations of frame size and pixel aspect ratio's that also work initially, but they project with the same problem.)
I had to have missed something.
ANY suggestions are greatly appreciated.
Eric
Power MAC G5 Mac OS X (10.4.7)

The footage did come from an HDV from Sony.
I use QT Conversion because if I export it as an QT Movie, the video is distorted. However, when exported through Quicktime conversion/quicktime movie/no compression, the movie is exported in the correct dimensions, though the DVD play back issue still persists.
I am running off of iDVD v 5.0.1 and could not find a place where I could choose a 16:9 option, if that is what you meant.
The sequence does include a PSD mask which was imported as a Layered Graphic Sequence. That shouldn't have any impact on the burning issue though.

Problems exporting a movie in Flash CS4

I'm trying to export a fla file to a mov file in Flash CS4.
My fla file is 152 mb. It is a 5 minute presentation I created with a 39 second f4v file (video clip) in the file.
I go to Export / Export Movie. I select Quicktime (mov). I keep the default settings and it starts to cycle through. It gets about half way and I get a message "The export operation failed because it ran out of memory"
I'm running this on a Mac Pro, System 10.5.8. I have 4 GB of memory. My HD is 232 GB with 155 GB available.
What is the problem and how can I get this to work?

Well, for some reason, I've managed to be okay with the idea that all software relying on links is prone to crushing at any given moment during execution of a project, Yes this includes After effects, Illustrator, Indesign_name it. However, one thing I cannot understand or even come to terms with the idea that Flash CS4 cannot export a project of 162mb. My library is organised, My scenes are in perfect order, I do not even use 3rd party componets in my projects..... but for some reason, I cannot export let alone publish an application file from FLASH CS4.
My first thought was maybe some thing was wrong with the "flash.ocx" extension, so I took a walk and visited the Adobe site to get an update, but still after re-installing it nothing seems to put a smile on my face_( I've spent sleepless nights on this animation and all I need is to just export/ publish it, however flash exports it halfway and out of a blue the export dialog and the incomplete file vanish) Some times I even wonder wether there is a vortex on my desktop.
Another problem in this category am finding is with flash player in my browsers, if it runs in exlporer, then it won't run in firefox, and when I check in the control panel after installing on both browsers, I am so suprised to find 4plugins of flash player, which is not the case with my friends laptops which use 1plugin and an activeX control for the web browsers.
Any help is very welcome, Am using Dell studio-xps Laptop running a 64bit Windows Vista OS, 4bg Ram, 1 Terabyte HDD and yes Intel Graphics media card with dedicated memory of 1gb. (Of what use are they if I cannot export a small file of 162mb, am even ashamed to mention it, heeeeeelp )

Problem exporting

Here it goes, I tried to export a two hour movie I've made and I exported using compressor. All three times I've exported, it has freezed on 46 percent complete. I checked my project in final cut pro 5 and where the frame freezes while exporting is just someone saying a speech. Now the hard drive I was using at first and second chance had only 10 Gb of free space so I thought that might have been the problem. After I used my main hard drive to hold the exported file and I have about 30 Gb free of space and still the same problem. I just want to put this thing on a DVD and when I tried to export using quicktime conversion, it notifies me that I can't do it because I have not serialized my program. As I've been trying to serialize my programs, I cant figure out how to do it. I remember that when I installed my programs it asked to do so but at that time I had no internet connection. So here are the questions.....
1 - Whats wrong with my final cut project in order it to freeze everytime I export at 46 percent complete?
2- How do I serialize my programs so I have the option to convert using quicktime conversion?
Thank-you
Jason

The problem I had at first was I couldn't export using Mpeg-2 anymore and I found out that FCP Studio took out that option to export as it only has Mpeg-4. Than I read that the best way to export to get the best quality is by using Compressor but compressor would take about 30 hours for a video that was about 2 hours long. I was than told that if I export my project as a quicktime movie and make it self contained, I can than grab that self contained file, open it in Compressor and it'll only take about 8 hours, perfect time for when I sleep. Hope that explains everything.

After i export my project from iMovie, where does it go?

i exported mmy project to idvd and i cant find my project, i have it on my desktop but it wont open up or play please help.

i cant find my project,
i have it on my desktop
What are you clicking on your desktop if it is not your project, the one you cannot find?
You will be better off posting in the iMovie and/or iDVD forums where the experts hang out. This forum area is for MBP problems which you are not having. Your problem is software related.
Also, it would be helpful to the folks helping you if you would advise which OS system is currently installed.

I'm getting the message -50 error when i try to export my project on iMovie '09. What does this mean??

I'm getting the message -50 error when i try to export my project on iMovie '09. What does this mean??

Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
free space on internal boot hard disk? How much ?
Video codec
streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
in what format ? .jpg, .bmp, .tif, else ?
Audio
from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
iMovie/iDVD preference file
The "com.apple.iMovie.plist" file or "com.apple.iDVD.plist"
Many users has not observed that there are TWO libraries.
_ Library - at root level
_ Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
Where do Your material come from
Camera
External hard disk
USB-memory
And all are connected so that iMovie can find it ?
from: jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
from Karsten S
Shorter clips than 1,5 sec might be one of the culptrits
Bengt cont.
Set-Up might differ
Mac OS - most probably X.7 or more
iMovie version - more than iM'11 v. 9.0.4
Action taken
Finalizing project - I never do as I never understood the gain to do so
Share as HD to iDVD - never give any gain but if it works the resulting DVD is less quality than if SD-quality was shared
fps - set - I only use PAL (25fps) 
Yours Bengt W

Mac Mini crashes when exporting imovie projects

Hi.
When I try to export imovie projects, my Mac Mini crashes. Not ever, just every two or three times.
My system is 10.6.7 and imovie is 11. Can anyone help me? Thanks, I apologize for my bad English

Thank you, I'll try!
I hope you're right, because is boring to see out of the blue all the screen getting grey and the window that invites you to reboot, without hope... It happens, for example, after two or three succesful exporting projects, then I reboot and go on for another two or three projects and then again... I'm afraid it's a RAM problem, but I'll try to update system and software.
Thank you again

Problem exporting my projections

Similar Messages

Maybe you are looking for