Problem exporting Prores proxy files in CS6

I have a bunch of Apple Prores proxy files which were created from RAW DNG files in DaVinci Resolve. I have completed an edit of a music video with these files in Premiere Pro CS6. However when I try to export the files from the timeline, the exported file seems to have linked to all the wrong clips, and the whole video seems to be a random mish-mash of clips. The timecodes of the clips all seems accurate, and they display perfectly within CS6 and in quicktime.
Wondering why the clips display fine on the timeline, allowing me to edit the video in-sync, however will not export properly?

From here: InfoPurge Programming Tips, What is StackHash?
What to do if you get a StackHash?
First configure Problems Reports and Solutions in Control panel to Check for Solutions automatically and Automatically send more information. Then check if there are fixes available for your application. If there are then download and install them.
Make sure your Window Operating system has all the latest service packs, security updates and other fixes installed.
Most applications have a Check for Updates feature. Use it to make sure you have the latest version of the S/W. Alternatively visit the company website and check for new versions and patches.
Run an up-to-date virus checker on the machine and fix any issues. If a virus is detected in the application then you may need to reinstall the application.
Re-install the application. Through Control Panel \ Programs \ Uninstall a program. Right click the application and click Uninstall / Change. This should launch the installer which may give the option to Repair the installation. If not then you will need to uninstall and reinstall - make sure you have the original installation discs available before uninstalling.
Disable any Virtual Drive software that may be hooking in to the application. If the problem goes away, contact the developer of the Virtual Drive software.
Disable any Virus checkers on your machine (temporarily) and run the application again. If the problem goes away, contact the developer of the Virus Checking software.
Check if the problem is reproducible (after a reboot). If it is, then attempt to narrow down the exact steps that cause the fault, write them down and contact the support department for the company that developed the application providing as much information about the crash and what you have done so far to attempt to resolve the issue.

Similar Messages

Problem exporting to PDF from ID CS6. Objects are missing in PDF.

Hello!
I created a large format poster (24x36 inches) in ID CS6 to be printed. My printer requires PDF files to print from. My problem is that when I export my ID file to PDF, objects are missing. For example, in this file, the company logo in the upper left corner of the poster is incomplete (missing the orange color fill with white text in orange circle.) This object was originally created in AI CS6 then imported to the ID document.
I am pulling my hair out trying to fix this and have not been able to find like issues online. Any help would be GREATLY appreciated. Thank you!!!!

The missing object is visible with Overprint Preview turned on.

Problem Exporting for Web files created in FCE using Quicktime

I have been using FCE 4.01 on Mac OSX 10.7.5 with Quicktime 10.1 (501.29).
I convert my footage in Mpeg Streamclip (GREAT free program) and set the files to the Apple Intermediate Codec. This makes them work really well in my timeline and I don't have rendering issues or problems.
So, my problem comes when I File/Export/Quictime Movie.
The original file plays fine, but they're 2-3 gbs each, so I put them into Quicktime to convert them to a webfriendly size, but every single time they come out as an audio only file. GRRRR!
Any help would be greatly appreciated. Maybe I'm missing something stupid.
Thanks so much for your help.
Sincerely,
Steve

Why not bring the exported AIC file back into MPEG Streamclip instead of QTX? You'll have a lot more control.
Compress the file to H.264 and restrict the data rate according to the resolution you're working with and to something consistent with the guidelines of the Web Service (say, You Tube) you're uploading to, (For example, something like 6 Mb per second would be about right for a 720P file.)
Or use Quicktime Conversion from FCE.
Good luck.
Russ

Problems importing ProRes 4444 files

The original footage for my project is 16mm film, which I had scanned. I've been provided with two types of files: one set in ProRes 422 (proxy) with a timecode burn-in, and one set in ProRes 4444 with no burn-in. I've been able to import the 422 files without any problems, but obviously I greatly prefer the 4444 files. But when I've tried importing them, or even just previewing them in Media Browser, it's impossible to achieve fullspeed playback. I can't quite tell what's going on; the frame rate is definitely off for starters, it's too slow, but at any rate it doesn't play smoothly. Any idea how to start solving this problem? I've done a system resources test and I have plenty of horsepower, so I don't think this stuttering is due to that. I also have the newest version of QuickTime installed. I'm on a PC if that matters. Thanks for your help.
Rob
[Text formatting corrected. Personal info removed.]
Message was edited by: Jim Simon

They are using a card reader, and the USB slot in an iMac. It turns out that they have downloaded the cards first to their PC at home, then brought the same card to class to import to their LR catalog on their external HD. Could here be something happening to the files to make them unreadable when the cards are downloaded to the home PC?

Problem exporting large QT files in Premiere

I have Adobe Premiere (a recent edition - not sure if it's
Pro but close) and I am trying to export a movie from my timeline
into a Quicktime file. On smaller files (say, under 3 minutes) it
works fine, no errors, and the QT files play fine.
But anything bigger than that and I get the "Error 2048"
message. This error pops up right as Premiere finishes exporting
the file.
I have seen the "Error 2048" issue addressed here and on a
few other forums, but since the smaller QT files export and play
fine, I do not believe this is a problem with my Quicktime program.
I normally export to AVI and have never had problems with
that, but for this project I'm dealing with Mac people who
apparently have issues with AVI's coming from a PC.

could be worth posting in premiere... but I'd say its to do
with the final file size. some codecs only allow a maximum file
size of, say 1gb... you could either... try compressing your video.
or cut it into small chunks and export each of these and then put
it back together.
What media are you putting the final video on?
For CD and DVD playback MPEG2 is a good quality video format
with a reasonable file size.

Problems exporting large PDF files

I am trying to export a 52 page InDesign file to PDF. One or two random pages will not export properly, elements from other pages appear and other graphics which were there in InDesign have dissappeared in the exported PDF file. The most annoying thing is that when I export the offending pages separately, one at a time the export without any problems. Is it possible for Indesign to experience an "information overload" when exporting larger documents? how can I fix this?
thanks,
Geordie

Well, I didn't want to go into the weeds and be too much of a distraction, but since you asked, I guess it's puzzling because:
I work with long complex documents, and it doesn't happen to me.
We don't see many reports of this problem on the forum [I can't remember any, honestly, but I have not dug hard].
There are some similar problems, mostly relating to master page items, that have been fixed in some recent updates.
I don't see how touching many or all page items or pages has much to do with "address space"; sure, it will make InDesign use more virtual memory, but that's a core function of the operating system, and if it's flaking out, there should be many more serious problems. Therefore I am probably misunderstanding your use of "working address space."
If in fact there is some allocation limit that is being hit or leak or whatnot, it ought to be caught be refcounting of the resource, and the various checks in the InDesign debug build, the InDesign server 30-day uptime tests, etc., etc.
The implication is that you have reproducible testcases for this problem and have been unable to get InDesign Engineering to resolve the problem, which is kind of an unfortunate situation to be in, so I slap the label of "puzzling" on it.
An alternative interpretation is that you think the problem isn't easily solvable and haven't really tried to do so, which I also find puzzling.
If the 64 bit InDesign fixes this, it's just papering over the problem. But since we have a 64-bit InDesign Server for Windows (right? I don't use ID Server for much), it should be easily testable today.
So, that's basically some rough insight into the things floating around in my head that lead me to be "puzzled."
I don't mean to discount your problems, or your workaround; I thought it useful to offer the original poster the standard workarounds and suggestions we tend to offer for the broader category of problem, in case yours did not work (hence "Beyond that").

Problem printing old photoshop files in CS6

Hi,
Can someone advise, we have Adobe CS6, and when printing already created file in Photoshop we get a error:
Problem
signature:
Problem Event Name:                        APPCRASH
Application Name:                             Photoshop.exe
Application Version:                           13.0.1.34
Application Timestamp:                     5269b25c
Fault Module Name:                          StackHash_567d
Fault Module Version:                        6.1.7601.18247
Fault Module Timestamp:                  521eaf24
Exception Code:                                  c0000374
Exception Offset:                                00000000000c4102
OS
Version:
6.1.7601.2.1.0.256.48
Locale ID:                                             1033
Additional Information 1:                  567d
Additional Information 2: 567df4dd243b5f39ec0910e31fab3f66
Additional Information 3:                  8a50
Additional Information 4:
8a50800075570bc227fceb5a894dd794
All new files print successfully, changed printer drive no avail
Please advise

From here: InfoPurge Programming Tips, What is StackHash?
What to do if you get a StackHash?
First configure Problems Reports and Solutions in Control panel to Check for Solutions automatically and Automatically send more information. Then check if there are fixes available for your application. If there are then download and install them.
Make sure your Window Operating system has all the latest service packs, security updates and other fixes installed.
Most applications have a Check for Updates feature. Use it to make sure you have the latest version of the S/W. Alternatively visit the company website and check for new versions and patches.
Run an up-to-date virus checker on the machine and fix any issues. If a virus is detected in the application then you may need to reinstall the application.
Re-install the application. Through Control Panel \ Programs \ Uninstall a program. Right click the application and click Uninstall / Change. This should launch the installer which may give the option to Repair the installation. If not then you will need to uninstall and reinstall - make sure you have the original installation discs available before uninstalling.
Disable any Virtual Drive software that may be hooking in to the application. If the problem goes away, contact the developer of the Virtual Drive software.
Disable any Virus checkers on your machine (temporarily) and run the application again. If the problem goes away, contact the developer of the Virus Checking software.
Check if the problem is reproducible (after a reboot). If it is, then attempt to narrow down the exact steps that cause the fault, write them down and contact the support department for the company that developed the application providing as much information about the crash and what you have done so far to attempt to resolve the issue.

Problems exporting an RGB file as PDF

Hello,
Here is my problem.
I made a 10 pages file in InDesign, RGB space designed for web. Created some masters. After exporting (smallest file size as well as others too) to pdf the result gives me different tint of colour on pages even if i used the same master. So, if page 2 uses Master A and page 4 uses the same master A, in pdf they have a different color, more like they have a different color managment.
Please help me with this issue and sorry if i couldnt explain very well.
Ana

So in the screen capture, ive got up 2 pages, and down, another 2 pages. From left to right up is cover 2 and then page 1, then down, page 2 and page 3. The psd files Ive used for all masters are the same, using the same color space, using the same save options. Up, the green displayed for both background images is lighter and looks more like a CMYK green. Down, the green displayed is the RGB correct green. As i checked many times psd files are good and is nothign wrong with them from what I saw. There must be something I do wrong or I didnt notice in InDesign. As I said, space it is set for RGB, blending mode it is RGB and I do not use any other transparency objects on any of the page. So, Ive got only the background images files, and text from indesign, that is all. Still, I might do something wrong and I am not aware of, because I work usualy only for offset printing purposes, not for screen purposes set as RGB.
My monitor behave the same as the example you gave, unevenly from top to bottom, still this is one of the first things I check if I see something wrong with colors, being aware of monitor behaviour.
As you said the difference is not that big, but it still is and bothers me as long as I want to look everything the way I designed. Not important for this topic, still I am explaining to understand why I need everything as good as it can be. The final pdf file will be available for download on a website I design for an artist. She created an art character who has a background story developed. It is a special page on her website, designed only for this character with his story. The site will be seen in some expositional spaces by many people, so, for this purposes, I really need everything to look good, without evident issues.
Thank you.

Problems exporting to WMV file type.

I'm trying to export my footage as a WMV file but the system only converts about 17 seconds of my video. i went through the export options for windows media but i had no good results. has any one in counter this?

i actually have the free version. I didn't think of that. Hey thanks for the reply I'm going to work on that. Thanks again.

How do i export ae cc file to cs6 version ?

i couldn't find a clear answer for that..please help me

If you have CC 2014, you can save as CC, then open the file in CC and save as CS6.
More info here: opening After Effects projects from previous versions and saving back to previous versions
And, if you no longer have (or have never installed) the previous CC version of AE, you can install it from the CC software: Creative Cloud Help | Install, update, or uninstall apps

PDF quality problems exporting from InDesign and Photoshop

Hi There.
I'm having big problems exporting my InDesign files to PDFs and retaining the res. And it's not just the images (I understand about the dpi) it's the type on there too.
I have been exporting as the preset High Quality Print - is this wrong. Are there other settings to ensure the PDF I export retains the high-res quality and clarity?
At the moment it comes out high-res when I export it as a jpeg or eps but not PDF.
I have also noticed the same problem when I export to a PDF from Photoshop.
I really need to create interactive and high quality print PDFs from my InDesign files.
Please can you advise.
Thanks
Karen

I am also having problems with pdfs exported from Illustrator and Indesign recently. I didn't have these problems before, so I don't kno if something has changed in my settings that I am unaware of.
When I use the 'japanese dots' border in Indesign, it shows on the pdf as a kind of dotted line. I'm exporting as 'High Quality Print'. I switched to Illustrator and drew a line with the pen tool, and converted it to a dotted line; it looked just how I wanted in in Illustrator, but as soon as I exported it, the same thing happened.
I have used the 'japanese dots' border in the past, exporting as 'High Quality Print', and not had this problem.
Does anyone have any suggestions?

QT Pro Locks Up When Exporting to .AVI File

I bought QT Pro a 2 months ago and had no problem exporting a .mov file to .avi.
Now, whenever I try to export, QT Pro locks up, other times I get and unknown error message.
I have installed and uninstalled QT Pro without any luck,
I have also tried booting my computer with no start up items and that didnt work either.
Anyone know why is this happening and what I can do to fix it

I bought QT Pro a 2 months ago and had no problem exporting a .mov file to .avi.
Now, whenever I try to export, QT Pro locks up, other times I get and unknown error message.
I have installed and uninstalled QT Pro without any luck,
I have also tried booting my computer with no start up items and that didnt work either.
Anyone know why is this happening and what I can do to fix it

Incorrect images from .indb file export to ePub in Indesign CS6

I am having problems exporting images to ePub and get a different result from the same file depending on whether I export directly from the .indd file or from the .indb file.
When I export to ePub from the individual chapter (.indd) file, everything is fine and the images appear in the correct locations where they have been anchored.
When I export via the book (.indb) file, images are being replaced with the incorrect file in the resulting ePub.
Looking at the HTML, it seems not all images are being exported from the .indb file and when the image is missing, Indesign is substituting the next available image from the alphabetical list in the images folder so I'm getting incorrect images peppered throughout the book.
Any idea where I've gone wrong and how to fix it? I've produced several ePubs with images and never come across this before.
More details on how I've set up the files and any other info I think might be relevant below if needed.
- I'm using Indesign CS6 (8.0.1)
- I'm producing an 11 chapter book.
- Each chapter is a separate .indd file for ease of editing.
- These 11 files have been added to an .indb file for export to ePub.
- Images are all anchored to their captions within the text.
- On Export to ePub settings for images I have selected to insert a page break before the image and that settings apply to anchopred objects.
Nothing else is selected (I don't want to preserve appearance from layout.)
- I'm using the Articles panel feature for order of content.
- In the original file supplied, the images were placed as .tiff images. I saved them to jpeg and relinked them using the "relink to folder" and "match same file but this extension" options.
- No links are flagged as missing.
Any help much appreciated.

The solution points to how, it appears, the book panel export is functioning: each file exports a set of tags referenced to itself; file01 adds a "1" to its tags, and so forth. What I was able to do was use a file referencing all of the tags in the style suite in two ways:
first, I exported to an epub the single file, creating a fairly clean CSS, which I then extracted and renamed;
then, making certain that file was the "source" file in the book panel, I mapped for export all of the tags, being careful to be certain each tag/class combo was same as in renamed clean CSS;
I synchronized the whole shebang;
I exported to epub, adding my clean CSS as an external style sheet, selecting only "include embeddable fonts".
Bingo!

Why, when exporting as master file from FCX, I have problem with sync

I edited all audio of a short movie in protools, bounced a stereo file, imported it in final cut and shared the master file at prores 422, from there through compressor I have created 2 files (mpeg 2 and ac3) and burnt a dvd but seems always to be out of sync , why?
fortunately i still have dvd studio pro that allow me to "nudge" the audio to fix the problem, but all this is quite time consuming.
any advice?

I have fixed some issue about audio and video, created a new project with correct sample rate, imported the master video at same frame rate, and in pt bounced a new track of audio, so no orange bar, everything fine in FCX,AUDIO AND VIDEO PERFECTLY IN SYNC. i exported a master file at best current setting and in compressor have created a dvd setup hi quality, 2 pass vbr encoding mode etc
and.. imported the m2v file and ac3 in DVD STUDIO PRO, and on time line i hear out of sync, now i don't know if the problem happen during the encoding in compressor or is dvd studio pro.

I am having problems exporting my time lapses from quick time pro i need to save my files as photo jpegs but the standard video compression window will not open fully,

i am having problems exporting my time lapses from quick time pro i need to save my files as photo jpegs but the standard video compression window will not open fully, it just keeps my mac (old 1.6Ghz 2.5 GB sdram G5 still good for most stuff i need) spinning for ever but i can see compression type H.264 selected and the other setting but i can not select any other options as it still thinking but never opens! why is this happening how do i get round it?
my work flow is: 300 images shot on a 5d mark II medium jpegs opened in Light Room cropped to 16:9 then exported and opened in quick time i can save a .mov H264 giving me files sizes of 14 mb for a 16 second time lapse, mp4 9 mb. the only way i can get large files is saving as a self contained movie then i get 300mb files.
i need to save my files 1920 x 1080 photo jpeg codec as i want HD quality.
i am sure there is a simple way round this?
thanks guys!

It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
How large is your hard drive and how much hard drive space do you have left?

Problem exporting Prores proxy files in CS6

Similar Messages

Maybe you are looking for