Problem exporting to PDF from ID CS6. Objects are missing in PDF.

Hello!
I created a large format poster (24x36 inches) in ID CS6 to be printed. My printer requires PDF files to print from. My problem is that when I export my ID file to PDF, objects are missing. For example, in this file, the company logo in the upper left corner of the poster is incomplete (missing the orange color fill with white text in orange circle.) This object was originally created in AI CS6 then imported to the ID document.
I am pulling my hair out trying to fix this and have not been able to find like issues online. Any help would be GREATLY appreciated. Thank you!!!!

The missing object is visible with Overprint Preview turned on.

Similar Messages

Created PDF from MS Access - lines are missing from PDF

I'm using Acrobat 8 (from Adobe CS3) to create PDF files. When I "print" reports from Microsoft Access 2003, the thin line borders that outline cells are often missing from the PDF. Typically, 1 or 2 of the sides are missing, with the other sides appearing normally.
This appears to happen primarily when the line thickness is set to "hairline".
If I use a non-Adobe PDF writer (PDF Creator), then the lines appear normally.
Any suggestions about what I can do to correct this?
Thanks - Jim

These are the settings.

Too long export to PDF from Indesign CS6

When I exporting PDF from InDesign CS6 takes too long. For example, a few minutes (5minutes). In InDesign CS3, which I used earlier, the file is exported immediately (few seconds). It is a problem in setting or higher hardware requirements?
I use laptop 2GB dual processor, 8GB RAM, Windows Vista 32 bit. You have a similar experience?

It is strange that CS6 supports Windows XP and Windows7 and Vista does not support. I use 8GB RAM because I bought a laptop so. There for me any solution, how to enable CS6 InDesign with the 32 bit system Windows Vista?

Cannot overwrite PDF when exporting to Acrobat from InDesign CS6

When exporting to Acrobat Pro X from InDesign CS6, there are times when I want to overwrite an exising file but I get an error msg that the file is in use (it is not--this even happens when I have closed the file and quit Acrobat) or i don't have permission. In the Info panel at the Finder, i see that "myusername (ME)" does have permission to read and write this file. As a test, I also changed the permissions for Admin and Everyone to Read & Write, but that did not help. I've checked Preferences in both InDesign and Acrobat Pro anc can't find a relevant setting.
To save the file with the same filename as the pre-exisitng PDF, I have to close the pre-exisitng PDF and move it to the trash.
I have no problem overwriting a PDF document from Acrobat. This only happens when I am exporting from ID.
I am on a Mac running the latest version of OSX.
Any ideas?
Thanks!
Carol Gunn

Make sure that the PDF you are trying to overwrite is not selected in your finder. I've found that if it's selected in the finder then the preview tricks Indesign into thinking the file is busy

Having trouble exporting to pdf from InDesign CS6

When I attempt to export to pdf from InDesign CS6, the application crashes. Apparently there is some phantom plug-in issue.
I need to get this resolved asap.
Thank you,
Marissa

Have a look at this generic document to help you troubleshoot: http://helpx.adobe.com/indesign/kb/troubleshoot-printing-pdf-export-indesign.html
Could you also provide details about what you've tried, and what errors you encountered? Is this problem limited to a particular document, or all documents?

I am new to EPUB fomat and I am facing a lot of difficulties in exporting my work from InDesign CS6

Hi..I am new to EPUB fomat and I am facing a lot of difficulties in exporting my work from InDesign CS6. The problem is that I have got a financial report of about 100pages to export as EPUB, with lots of graphs etc..and when I export it, to EPUB 2.0, the following happens:
1. The image quality is quite low (even if the original images are of high quality, and during export, i put the image to max quality)
2. The graphs do not appear where they should be! All the imags in fact appear after the long paragraphs of text..meaning everything appear quite messy and in an unordered manner.
I have read that images should be anchored, and doing so, the result is quite better, but still, some images appear at the end of the text!!d
That is, the end result, in terms of pagination and graphics, is no way like it should have been, compared to the indesign file (page 5 is displayed after page 10, image on page 4 appears on page 9 etc..)
PLEASE HELP..
P.S :
I am using Adobe digital edition to view my EPUB..I have also tried CALIBRE and SIGIL!! But I am not too sharp in eiting CSS codes etc...

Hi Akshay,
If you want your images to appear standalone with no other page item on the page, then you can insert Page break on an image.
This is how you can specify a page break:
1. Select the image
2. Goto Object->Object Export Options
3. Select EPUB and HTML tab
4. Select Custom Layout check box and then check Insert Page break. You can select from the option in the dropdown-Before Image, After Image, Before and After Image as per your requirement.
Regarding your question about images:
You export your graphs as JPEG but are those JPEGs of good resolution? If they are, then InDesign is doing something wrong during export but if the JPEGs are not of good quality then it is not an export issue. Please provide some more details here.
Regards,
Pooja

Is it possible to save or export an e-book chapter from Adobe Digital Editions? Is it possible to export or save from Adobe Digital Editions to an Adobe pdf?

Is it possible to save or export an e-book chapter from Adobe Digital Editions? Is it possible to export or save from Adobe Digital Editions to an Adobe pdf?

I hope you won't see this as rude, but what you are missing is the obvious point that Adobe are in business to make money. So they put as little in Adobe Reader as they can, so people are motivated to buy stuff. Every development intended for Reader has severe limitations on feasibility and techniques for this reason; it's a huge (but very common) mistake to just develop for Acrobat and assume Reader will follow.

Conversion from .pdf to .docx: I have converted a text in Slovenian in .pdf, but all the accents are missing in the converted .docx. version

Conversion from .pdf to .docx:
I have converted a text in Slovenian in .pdf, but all the accents are missing in the converted .docx. version.
Does Adobe have a converter for texts with European-language accents, or shall I cancel my subscription?

Subscription for what: ExportPDF or Acrobat?
[topic moved to Acrobat.com Services forum]

Error Installing BI 7 cont "Cannot install BI content, Objects are missing"

I am trying to activate all the infobjects in BI 7 for the Plant maintenance, QM and CS. While simulating the activation, I get the message:
"Cannot install BI content, Objects are missing"
Does anyone know what's going on?
Thanks
B

What service pack are you on ?
Try note 1019055
Also - Are there any short dumps ?
Message was edited by:
A S

HT4859 restored my iphone 5 from iCloud back up. All my photos from my old phone are missing. How do I get them back?

I recently got my iPhone 5 replaced. Before erasing the contents on my old iPhone 5 I backed up to iCloud. When I restored all my photos from my old phone are missing. How do I recover?

Many users have lost photos while preforming a restore from backup or upgrading the iOS. Recall, only photos in the camera roll are backed up to iCloud. There is a way to turn backups for camera roll on/off, perhaps these users had camera roll turned off.
See:
Settings>icloud>Storage & Backups>Manage Storage, tap the device's name and on the next screen, be sure Camera Roll is turned on.
IMPORTANT...
Photos should be regularly synced to a computer (like you store photos from a digital camera) using either USB via iTunes (on a mac use iPhoto or Aperture to move them to an album) or using photo stream - and then moved into permanent albums for storage. If using Photo stream, but sure to move the received photos to a permanent album. If you have been doing that, then you can sync those photos back to your device.
If you haven't been saving photos except relying on iCloud to store them in a backup, then that is risky, as many users have discovered. I'm afraid I have no advice in this case - there is no "cure".

Problem with exporting PDF from Indesign CS6

Hi,
I recently registered & installed CS6 on my computer (Last week!), and I seem to have problems with Indesign, which is the main reason for my buying the product.
The problem is that whenever I try to save & export a file as PDF from Indesign I get an error message (See attached file).
The files are saved with 0KB size, and so the Acrobat reader can't open them for preview.
This really interrupts my work, and backs up the entire comapny schedule.
I already tried updating, and uninstalling&re-installing the suite - but no luck.
Any help would be appreciated, and we need it ASAP.
Thanks in advance,

Without proper system info and details about what PDF settings you actually used and how and where you save your files, nobody can say anything. You could simply be doing something silly like using PDF/A, but trying to enforce high-res pictures or whatever. In any case, ask in the ID forum.
Mylenium

Exporting to Flickr from Bridge CS6 Fail

I'm trying to export photos from Bridge CS6 to my Flickr.com account for the first time in several months, and getting an error message from Bridge that it cannot "authenticate with Flickr". I've used presets that were successful in the past, as well as going through the usual routine to get new authentication codes from Flickr.com. I recently updated my iMac to OSX 10.x, but visiting Flickr's community site suggests that they adopted a new API that was sent to developers like Adobe and that Adobe has not updated their export protocol. Other contributors to the site suggest that Adobe's position is that Flickr needs to do something. Are others experiencing this problem? Does Adobe offer no solutions to this problem?
Any advice would be appreciated.

I had to rebuild the file from scratch in order to export the pdf, and the hotspots line up accurately to their originally location drawn on fireworks.
This may have occurred because I began the document with a canvas size of portrait letter, but changed the canvas size later to landscape letter, and although everything looked well and fine, the export was still triggering the old referential data in the file.

Problem exporting Prores proxy files in CS6

I have a bunch of Apple Prores proxy files which were created from RAW DNG files in DaVinci Resolve. I have completed an edit of a music video with these files in Premiere Pro CS6. However when I try to export the files from the timeline, the exported file seems to have linked to all the wrong clips, and the whole video seems to be a random mish-mash of clips. The timecodes of the clips all seems accurate, and they display perfectly within CS6 and in quicktime.
Wondering why the clips display fine on the timeline, allowing me to edit the video in-sync, however will not export properly?

From here: InfoPurge Programming Tips, What is StackHash?
What to do if you get a StackHash?
First configure Problems Reports and Solutions in Control panel to Check for Solutions automatically and Automatically send more information. Then check if there are fixes available for your application. If there are then download and install them.
Make sure your Window Operating system has all the latest service packs, security updates and other fixes installed.
Most applications have a Check for Updates feature. Use it to make sure you have the latest version of the S/W. Alternatively visit the company website and check for new versions and patches.
Run an up-to-date virus checker on the machine and fix any issues. If a virus is detected in the application then you may need to reinstall the application.
Re-install the application. Through Control Panel \ Programs \ Uninstall a program. Right click the application and click Uninstall / Change. This should launch the installer which may give the option to Repair the installation. If not then you will need to uninstall and reinstall - make sure you have the original installation discs available before uninstalling.
Disable any Virtual Drive software that may be hooking in to the application. If the problem goes away, contact the developer of the Virtual Drive software.
Disable any Virus checkers on your machine (temporarily) and run the application again. If the problem goes away, contact the developer of the Virus Checking software.
Check if the problem is reproducible (after a reboot). If it is, then attempt to narrow down the exact steps that cause the fault, write them down and contact the support department for the company that developed the application providing as much information about the crash and what you have done so far to attempt to resolve the issue.

Exporting / Copying settings from ACR Smart Object

How do I export the RAW processing settings from an ACR Smart Object in Photoshop?
If I use Save Settings it only allows exporting a subset of the settings (no spot removal and local adjustments).
If I use Export Settings to XMP it doesn't seem to do anything.
The only way I've found to do it is to Save Image (from the Smart Object in ACR), save as a DNG, then use ExifTool to extract the XMP. Surely there must be an easier way?

I ABSOLUTELY agree...... That's exactly, I believe, how it's SUPPOSED to work.
Except that mine didn't.
I opened a 12.2 MP RAW file.
And made absolutely no changes to the workflow uptions at the time of opening.
But instead of "Image Sizing" saying "Default 12.2 MP", it said "3.6MP"
Resize was turned OFF
Width was 2321 px and height was 1824 px, BOTH GRAYED OUT.
Upon leaving ACR, I had a 2321x1824 file.
Eventually, after wasting another hour screwing around with it, I finally blew away all of Bridge AND the preferences and all that,
and rebooted since the %$#)(*& Adobe CC thing wouldn't figure out there was no more Bridge, and resintalled...........
Now, when I open a file in there, at LEAST it knows it's 12.2MP.
It STILL wants to change the Space to sRGB, which I NEVER use from here, and the Depth to 8-bit, which again, I never use in ACR,
but I can set those back to what they should be...
So, in this case, by using a large enough bludgeon, I appear to have gotten around the problem. Now I'm just waiting to see how soon it screws up again.

Problems accessing Bridge/Minibridge from PS CS6

I was never much of a user of Bridge or Minibridge until I upgraded to PS CS5, I gradually became aware of the various conveniences offered and have been disappointed to find that, using CS6, although I can click on Bridge, see its normal screen displays, and select images that are then called up in CS6, I cannot do the reverse, i.e., I cannot call-up Bridge or Minibridge from within CS6. The only way in is clicking on Bridge first (perhaps I should say I am a PC Windows user, and recently moved from 7 to 8 and recently 8.1). The problem has been with me since I installed CS6 running Windows 7 and has persisted through the subsequent upgrades. It is therefore not OS related.
I get the following error
Error 2: photoshop is undefined.
Line: 1
- > photoshop.invokeBridge (false, false, ");
I suppose I could go back to avoiding Bridge, or get by with calling up Photoshop via Bridge. Perhaps that is the way it is supposed to work. But I would prefer to be able to access it whenever and however I want. Can anyone show me how?
Roger Williams

Hi Roger_Williams,
I have moved this discussion to the Bridge forum, where you should be able to get more help on this issue.
Alec

Problem exporting to PDF from ID CS6. Objects are missing in PDF.

Similar Messages

Maybe you are looking for