Problem extracting data using 0EC_PCA_3 datasource
Hello every body.
Hope every thing is all right for you.
I'm facing an embarassing problem, and hope you can help!
I'm using datasource 0EC_PC_3 to extract data from GLPCA (ECC table) into a BI DSO. My probleme is that when i try to extract all data for a specific profit center group (or customer) i'm not getting data related to fiscal period biger than 10. When i add a filter on account number (on infopackage selection criteria) for example it's getting all data with no probleme in fiscal period!!
Any body has faced this error or something like it?
Thanks for help!
Salah
Thanks every body for reply,
yes i've fiscal period as part of my DSO key part!
At datasource level (0EC_PCA_3), i'm not getting data as it should be !!!
When, whitin my infopackage, i specify the profit center, data are retreived correctly, otherwise i'm not getting all data!!!
Any idea? :s
Similar Messages
-
Error while extracting data from Generic datasource
Hello Gurus,
I have encountered an error "Errors in source system" with status red while extracting data from generic datasource into DSO.
I have done below things:-
1. Checked the jobs in source system, the job is successfully completed
2. The generic datasource is active and supporting delta with calender day in source system.
3. No TRfc error and no idocs stucked.
4. No short dumps in source system.
5. The delta queue(RSA7) is showing 0 with status as green.
6. Replicated the datasource On BW side and also activated the transfer rules by RS_TRANSU_ACTIVATE_ALL
The problem has not yet solved. Could you guys please suggest me what might be the reason for this error......
Thanks,
SonuHello,
I have used the generic delta using calender day.
Safety upper limit : - 1
Safety lowerr limit : - 0
I have made the entries in va01 transaction, but the delta queus is not getting updated which should show 1.
Do Generic extraction require any job to transfer data from Database table to delta queue.
We are not able to get the delta records on BW side. Please suggest.
Please suggest.
Thanks,
Sonu -
Problem extracting data from R/3 to BW using infopackage?
Hi all,
I am trying to extract data from R/3 to BI7.0 through infopackage and its giving below error.
Request still running
Diagnosis
No errors found. The current process has probably not finished yet.
System Response
The ALE inbox of BI is identical to the ALE outbox of the source system
or
the maximum wait time for this request has not yet been exceeded
or
the background job has not yet finished in the source system.
Current status
No Idocs arrived from the source system
In the details tab:
Extraction (messages): Missing messages in yellow status
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings in yellow status
Data Package 1 : arrived in BW ; Processing : Selected number does not agree with transferred n
Processing (data packet): Everything OK in green status
Data Package 1 ( 370 Records ) : Everything OK
Inbound Processing ( 370 Records ) : No errors
Data package 1 received; Processing is starting
Update PSA ( 370 Records posted ) : No errors
Data package 1 is being saved...
370 records for data package 1 updated successfully, 0 records filtered
Processing end : No errors
Inbound processing of data package 1 finished.
Please anyone try to look at this issue and give me better soluttion ASAP.
Thanks,
Suresh.Hi ,
The infopackage run for avery long time in yellow state with out changing to green, This might happen due to connection error(get in touch with your basis team) or due to over load on the system.
eventhough the status of request is finished in source system, the job will be executing in the BI.
1)Wait for sometime for the request to turn out green automatically or
2)make the request to red and delte, repeat the infopackage step.
3)IF you know about the no of records that need to be transferred and if the total records are transferred already, manually change the request to green.
Cheers,
Srinath -
Error while extracting data using function module
Hello,
I created one generic datasource and i want to extract data with the option "Extraction by Function Module".
But when i specified function module name and was trying to save, it thrown a error message saying
'The specified table does not exist'.
What could be the reason?
Please help me out.
Thanks,
Regards,
SteveHi Steve,
Once you execute T.Code RSO2, you need to fill in the details and click Create, specify the Appl. Component and in Extraction by Function Module, give Function Module name and Extrct Structure in the given boxes.
"This structure is used by a DataSource that was created using the transaction RSO2 (generic extraction) and selects data using a function module.
The data must be transferred from this function module to an interface table E_T_DATA."
I'll try to comeup with small piece of code to sort your issue.
Hope it helps!!!!
Amit -
Error while Extracting data using RSCRM_BAPI
Friends
We are on 3.5 system upgraded recently. I am getting the following Error message while trying to extract data from a query to a table using the transaction RSCRM_BAPI. The Error message says ' Internal Error in Method CHECK_TABLE_NAME(RSCRMBW_EX_NAMESPACE_GET).
This was working fine prior to upgrade. I scoured all the OSS notes, could not find an appropriate one to solve the issue.
Have you had this problem and any thoughts on resolution ? Appreciate your inputs very much.
Regards
Mathur SreedharHi Mathur,
did you ever resolved this Issue? if so can yoou share with me the solution. i am having the same problem, we are in 3.0 . it works fine in Development and Test. but when i try it in Production . i get this error.
'Internal error in method CHECK_TABLE_NAME (RSCRMBW_EX_NAMESPACE_GET)..
if you know the answer. would please share with me.
your help would be greatly appreciated.
Thanks.
Sreeni. -
Problem Extract Data from Essbase
Hi all,
I have this error when I try to extract data from essbase :
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 1, in ?
com.hyperion.odi.essbase.wrapper.EssbaseRecordFetchException: Out of memory error.
at com.hyperion.odi.essbase.wrapper.EssbaseReportDataIterator.hasNext(Unknown Source)
at com.hyperion.odi.essbase.ODIEssbaseResultSet.next(Unknown Source)
at com.hyperion.odi.essbase.ODIStagingLoader.loadData(Unknown Source)
at com.hyperion.odi.essbase.AbstractEssbaseReader.extract(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
For information :
I use an reportscript which extract 400 000 records. I think that the problem comes from the staging area. How to modify size of the management of the memory?
I don't have this problem when i extract just 2 000 records for exemple.
Best regards,
BenHi,
Are you using a local or a defined agent?
Are you using the memory engine as the staging area.
Anyway you can increase the memory being used by the JVM depending on the above.
Cheers
John
http://john-goodwin.blogspot.com/ -
Unable to extract data from 0HR_PA_PD_2 datasource
Hi,
I am extracting the data from 0HR_PA_PD_2 (Appraisals) datasource to the cube 0PAPD_C02 (Appraisals).Though the data available in R/3 (83 records,checked in RSA3) it is giving the message "No data available in the source system".I checked the RFC connection,IDOCs,SM58 for any message.But everything is fine.In the status tab ,it is showing "Info IDoc received with status 8".But the data is available in R/3.
Please help me if any one faced this type of issue or is there any other steps has to be followed.
Thanks & Regards,
Dinakar.Hi Dinakar,
Check Roberto's reply in this thread... It might help you...
Re: Problem in InfoPackage for Billing Document Item Data(2LIS_13_VDITM)
Also check these related threads...
Info IDoc received with status 8. - extracting data from R/3 -co-pa
Info IDoc received with status 8. - extracting data from R/3
error while doing init load ..Idoc received with status 8
Info Idoc received with status 8
Regards,
KK. -
Change of sign while extracting data using Open hub
Hello All,
We are extracting data from Info cube to a file in the application server using Open hub.
While extracting data, if there is any negative value for the key figure, negative sign is appending on the right side of the value(Eg: "123.67-"), which is the standard behaviour but I want the sign to be on the left side of the value (Eg: "-123.67") while extracting to the file at application server.
Could any one please let me know if there is any setting to do this change ?
Thanks in advanceHi,
Changing the SIGN position from one side of the NUMBER to the other side can happen in following ways.
1) After the file is place in the application server. Deploy a OS SCRIPT file (for .csv) for obtaining the required changes to the required COLUMN [Basis team will have more idea on this]
2)This is time consuming idea. well deploy a routine at the Open hub -Infospoke level.
Regards -
How to find tables from extracted data using lo cockpit
I have extracted data form 2lis_02_scl using Lo cockpit and replicated in sap bw.
Now i want to know from which tables the data was extracted .pls giv info.
Thanks in advance.
Regards,
Hari ReddyOne quick way - search Help.
Tables are EKKO, EKPO, EKET , EKPA
http://help.sap.com/saphelp_nw70/helpdata/en/8d/bc383fe58d5900e10000000a114084/content.htm -
Extracting data from multiple datasources through DAC
We have to extract data from two Oracle datasources (GL datasource 1 and GL datasource 2) by DAC client to one Datawarehouse. We have configured DAC for one datasource and it is working fine. How can we add another datasource into the same DAC client.
NeerajYou will need to update the Source DB connections in both the DAC and Informatica Workflow before you want to load the DW with the other GL Database. You will contnuously have to switch these configuration settings or stand up another DAC Server, Repository and Client that point to the same Datawarehouse.
-
Code Page Setting while extracting data using Generic Data Source
Hi,
Can anybody tell me about the Code Page setting used in Generic Data Source in SAP BW 3.5?
I am extracting data from a Master Table using Generic data Source, but the data which is in Ukrane language is getting loaded as "#". Where do we set the Code Page for it?
Regards,
YK.To continue with earlier question, is there any particular setting for a master data, to load non english data as a text of master data?
I want to load TEXT of a master in Ukraine language. I am extracting this text from the P table of same master (From Description Field). But TEXT is not getting populated whenever it is Ukraine language. English TEXT is populated correctly.
Please share your experiences...
Thanks,
YK. -
Problem to extract data using DS 2LIS_11_VAHDR & 2LIS_11_VAITM
Hello Experts,
my requirement is to extract the SD sales Item & sales header data int BI. while executing the Reports in BI I find some incosistencies in data
Ex: for for some Sales organizations
0CRM_NUMDOC = 17 and the corresponding 0NETVALORD = 0,00
and for some sales organization
0CRM_NUMDOC = 0 and the corresponding 0NETVALORD = 5200,00
we are using the data sopurce 2LIS_11_VAHDR to load Document header data and the data sopurce 2LIS_11_VAITM to get Item Net value data. and used two trtansformations to the same SAP standard cubes 0CSAL_C05 & 0CSAL_C03.
asper my analysis in development system I find
VBAK contains 1405 records but the DS 2LIS_11_VAHDR extracts only 1235 records.
but
VBAP conains 2665 records and the DS 2LIS_11_VAITM extracts all 2665 records.
is it creats the problem?
I deleted the setuptables and again fill them even thought I have the same problem ?
If you have any idea regarding this issue please share with me.
Thanks in advance.
cheers.............HI,
Check indeed the extraction in your source system with RSA3.
Also perform the load and check your data in PSA (before any transformation takes place).
Are you going to use delta or full loading? I assume it's delta? So if you perform your initial load with data, no use of the setup table is required...
If you have too much data to do this, try an initial load without data, first delta load and next a full repair load (which will read your setup table). Do not forget to fill your setup table with all the historical data you need in transaction SBIW.
Hope this helps.
Best Regards,
Michel Hoefkens -
Issue while extracting data using Gen DS of Type Infoset Query
Hi All,
We have a Generic Data source created using the Infoset query. I get some data discrepency when i am extracting the data with the same DS. The data for the Field Amount in the R3 and the PSA is different. When i try to check the same using the RSA3 T-Code i am unable to execute the Gen DS in R3 production where as its working fine in R3 Dev, and i am able to execute the other DS in the R3 production using the RSA3 T-code.
My concerns ::--
1. if the DS is working fine in R3 Dev in RSA3 the y i am facing the problem in Production.
2. Y i am getting the different data in R3 and PSA since PSA shuld be the replicate of R3?
3. How can i resolve this problem.??
Thanks in Advance
RegardsThanks venkat,
I am having the authorization to execute the query in R3 production, As i am able to execute the other DS in RSA3 . But not able to execute this DS i had also checked it is active n working fine when loading the Data.
There is only one routine ie to transfer rule from lower to upper of a char value.
As der r routines in Update Rule but i have to get the same data in PSA which is der in R3.
The Routine of Update Rules will be executed when loading the data to the Targets right so the data may b vary in Data targets but y i am getting different data in PSA .
Pls thru some light.
Regards -
How to extract data using DSources which do not support Delta
Hi forum,
Iam using a data source which does not support delta. In such a scenario what should i do For subsequent extractions.Will i have to opt for full load every time, if so then how will the double data records be treated. Pls help me out of this situation. In RSA6 if i click on the data source there i can find a check box for enabling delta , but again that is greyed out. If i want to change that what steps should i follow.
All the helpfull answers and solutions would be thanked by assigning full points.
Regards
PallaviCan you give me the data source name please.
If it is a standard Business Content Datasource and it does not support delta(or delta is not enabled) then you dont have any choice to modify the standard Datasources. In such cases you can create a Generic DS same as Standard DS and enable delta.
Hope this helps.
Praveen -
Error when extracting data using DB Connect from an Oracle database
Hi All,
We are on BI 3.5 and loading data from a non-SAP (Oracle 10g) database using DB Connect.
I received the following error messages when trying to perform "Check DataSource" using the DB Connect setup in RSA1.
Event with errors RSDL_META_UPLOAD in DataSource
Message no. R8287
Warning Messages;
Message no. RSDL053
Field name ReceiptID contains non-alpha-numeric characters
Field name ActivityDate contains non-alpha-numeric characters
Field name ReceiptDate contains non-alpha-numeric characters
Field name ReceiptLineNumber must have between 000001 and 000016 digits
etc...
Views are created under the owner's user name. I have checked with DB personnel and they confirm that all the authorization and security access privileges have been correctly granted to the views.
We are also able to extract the data by running a sql query statement from the views using SQL Plus
Currently we also have a similar extraction process set up with an Oracle 9 database, which extracts the information without any issues.
Thanks,
AnthonyHi Mr Loh.
I know that this thread has over a year ago but i was looking for something similar for over 2 weeks ago and i ialways found this thread...I want to share my experience even that maybe you already found the same solution or something similar (i saw that you check your own post as answered):
I made a similar connection from BI 7 SP 18, but in my case was to a Microsoft SQL database 2005. When i "check the datasource" i receive like almost 150 warnings and 1 error and all the warnings and errors are the same ones as you describe above. What i did is create a custom view in the MSSQL database and convert all the column names to uppercase and the column names i limited to 16 characters at most. after doing that all the warnings and the error described disappear and i can view the database content when you made click in the "view content table" button.
I hope that this will help somebody and best regards
Martin Olmos
Maybe you are looking for
-
How to make my waveform from excel file perodic in labview graph
Hi guys, Previously I've made a vi which integrates the excel file, to plot the graph values in labview using the values in the excel file to give the me a better flexibility to decide what waveform i want it to be. Can i know how to actually make th
-
I NEED HELP MY NOKIA LUMIA 822 IS ALL BLACK SCREEN...
ok so, my dad has a nokia lumia 822. he said that he tried to unlock his phone, so he slid the page up and i guess it asked him for a system update? so he accidently pressed ok, or yes, or whatever and his screen went all black then later showed a
-
How to include script program in nace
Hi experts, I developed one script program now i want to transport this program to production.How to include this program in the NACE tcode and this program belongs which application type (how to decide).This program belongs to MM module.(creating a
-
How to avoid ModelLayer Update when validation fails in ValueChangeListener
Hi, One of the requirement in my application is to avoid model layer update when a value is changed in a field and it is not a valid value according to business functionality. Scenario is explained below. 1. Screen has one field SSN no. 2. User enter
-
How can I limit Bridge searches to just image names?
I'm new to CS5 and use Bridge a lot. The problem I'm having is that it seems very difficult to limit the images to just the artwork I'm looking for. When I type in almost any name, the Mac OS will bring up dozens of related files for every sort of OS