Problem faced while using BAPI_FIXEDASSET_CREATE1 to create assets in SAP

Hi all,
in which internal table of BAPI_FIXEDASSET_CREATE1 can i pass the field 'Profit center' and 'Segment' in AS01

hi,
i tink you cannot pass it directly
(dependant from cost centre)
A.

Similar Messages

Problems faced while using MicrosoftOfficeInterop

We are developing a windows program solution in which we programmatically access the Excel functionality and control the behaviour of the *.xlsx files.
We are using
Visual Studio 2012 Professsional,
Language C#
Namespace Microsoft.Office.Interop.Excel.
Functions being used are standard functions like
ExcelApp.Workbooks.Open(…….)
WorkBook.Save(..)
WorkBook.Close(..) etc.
To control behaviour of .xlsx files, We are also using events like
BeforeClose
BeforeSave
BeforePrint etc
On few systems (operating systems Windows 7 and above with Microsoft Office 2010 and above) we are facing problems. It gives exception with exception message as “HRESULT: 0x800AC472”. This exception is raised randomly (i.e. if it is raised while
using WorkBook.Save(..) but few seconds before this , same file is successfully saved at same machine and same path. OR if it is raised while using ExcelApp.Workbooks.Open(…….), the same was successful just before few miliseconds.)
We know one instance where it is expected to happen. If we are working on a machine where the office installed is a trial version (i.e. the Product Key id is not entered during installation), the above problem is known to happen. But it disappears immediately
after we feed the Product key. The Program behaves perfectly.
But on few machines where the windows is properly installed and the Office is also properly installed, the above mentioned problem is faced and we are not able to locate why the problem occurs.
Can you guide us to locate the problem and overcome the same?

Hi Mukund,
The
Excel for Developers forum is a better place for Office development questions. Please feel free to open a new thread at there.
Thank you for your understanding.
Best Regards,
Franklin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Problem Faced While Using The Expdp Utility in Oracle 10g

We are getting the following error while exporting the tables of a schema.
ORA-39127: unexpected error from call to export_string :=DMSYS.DBMS_DM_MODEL_EXP
.instance_info_exp('DM$P_MODEL_EXPIMP_TEMP','YEARLID',1,1,'10.01.00.03.00',newbl
ock)
ORA-06503: PL/SQL: Function returned without value
ORA-06512: at "DMSYS.DBMS_DM_MODEL_EXP", line 1061
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_METADATA", line 4995
ORA-39125: Worker unexpected fatal error in KUPW$WORKER.UNLOAD_METADATA while ca
lling DBMS_METADATA.FETCH_XML_CLOB [TABLE:"YEARLID"."CONTACTS_PGRANT_NOV22"]ORA-06502: PL/SQL: numeric or value error: invalid LOB locator specified: ORA-22
275
The table CONTACTS_PGRANT_NOV22 has got a column of type CLOB. We are exporting in the metadata only mode. Interestingly when we are exporting only this table individually, we are not getting any problem. Please suggest at the earliest.

Hi,
I need to take full export of the database with out data and for all schemas. Can you tell is below syntax correct or not:
expdp system directory=DATA_PUMP dumpfile=FullDB1_Jan25_08.dmp job_name=test3 logfile=FullDB1_Jan25_08_EXPDP.log CONTENT=METADATA_ONLY full=y
if I use above syntax I am not seeing all schema names in log file during expdp as we see in exp option.
Please let me know correct syntax.

I have error while testing the system created from a sap business objects template in SAP portal

I have error while testing the system created from a sap business objects template in SAP portal. Error text:
com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: A nested exception occurred. Could not initialize physical connection. Connection Failed: A nested exception occurred. Could not initialize physical connection. Connection Failed: A nested exception occurred. Could not create JCO connection. 'mshost' missing
I configure integration SAP portal and SAP BW system. All system requirements are complied.
Environment
SAP Business Objects 4.0
SAP BW 7.31
1.     I configure SSSO between SAP BW and SAP Business Objects Enterprise 4.0
2.     Next I setting integration SAP PORTAL with SAP BW system
3.     I download certificate from portal. Select Certificates and key (http://sapserver:port/nwa) – See scren_
4.     In next window selected Ticketkeystore and Saplogonticketpair-cert( near part window form)
5. Select Export entry button and binary format file certificate for download. Press download.
6.     Save certificate file in local PC folder
In next step need export certificate file to SAP system. Sequence of step:
1.       Run STRUSTSS02 transaction .
2.       Chose certificate ->import.
3.       Select downloaded certificate file
4.       Select Add to certificate list button and Add to ACL button
5.       Inter System ID and Client(000)
6.       In next I download iview sap business objects template into sap portal: System administration->transport->Import. And select and download sap business Objects iview template in .epa format into sap portal.
7.       Result – downloaded iview.
8.       In next step I create system from template. System administration->system landscape.
9. In next step I input parameters for my system in Connector category, Sap business objects and user management categories: See screen _2
10.   When I created the system and test the connection error occurred: See screen_3
This issue is important enough. I would be grateful for opinions and ideas. Thanks in advance.

Did you find a solution?

Classification System CA-CL: Problems / Dumps while using a new class type

Hi All,
You'd really make my day by helping me out w. hints or even a solution. Would reward points for your efforts...
The problem: in order to develop a class hierachy of product groups (in industry system, Rel. 6.40) I created a new class type (let's call it ZWG).
While doing so R/3 requsted me to provide info on the objects to assign to this class type as well as the transaction for displaying these objects. For Product Groups (material classes) this is object-table T023 and transaction WG24.
Furthermore the sys demands the implementation of a function module. This module's task is to check the existence of a given object as well as the locking and later unlocking in the process of classifying objects. Following SAP's naming convention I implemented and activated FM OBJECT_CHECK_T023.
After that I created a new class (FIRST_CLASS) of class-type ZWG.
I managed to assign exactly one (1) prod-grp to this class but afterwards I only receive dumps while using transactions CL20N, CL24N to assign objects.
The Message from ST22 says:
Assignment error: Overwriting a protected field.
Error in ABAP application program.
The current ABAP program "SAPLCLCV" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Do I have to debug throughout thís enormous amount of coding now? :-(((
Hope someone get's my "message in a bottle"
Best Regards
Udo

Yatin please see attached for warning.I am trying to create Z class using 001

Error while using BAPI to create Goods Receipt Document

Hello All,
While using the bapi BAPI_GOODSMVT_CREATE to create Goods receipt document ,the following error is encountered:-
Error Message:FOR OBJECT XABBELEGNR,NUMBER RANGE INTERVAL DOES NOT EXIST OM36.
Do we need to create a number range object ??If yes,how and where to create ?
Thanks,
Deepti.

Hi Deepti!
There is only a valid interval missing, not the whole object.
Maintenance can be done via transaction SNRO, enter your object XABBELEGNR in entry screen. (Alternatively use transaction OMJ6).
Push button 'Number Ranges' and 'Change Intervals'. Here you can define an interval.
Regards,
Christian

Error while using soap adapter in webservice to sap system scenario

Hi everybody,
i got the error while using saop adapter in scenario(sender webservice----->sap system)
error is
HTTP error:couldnot post file
'/XISOAPAdapter/MessageServlet:Channel=:BS1:SPA.&
version+3.0&sender.Service=BS1&interface=http%3ASP%5OUTBOUND'on server 'XI03'(500)

check with ur basis people

Problem faced while creating database in oracle 10g

SQL> get C:\Oracle_Docs\ex\dbcreation_script\DBCREATIONSCRIPT
1 create database db_test
2 logfile group 1 ('C:\oracle\product\10.1.0\oradata\orcl\testdb\REDO01.rdo','C:\oracle\product\10.1.0\oradata\orcl\testdb\REDO02.rdo') size 100 m,
3 group 2 ('C:\oracle\product\10.1.0\oradata\orcl\testdb\REDO03.rdo','C:\oracle\product\10.1.0\oradata\orcl\testdb\REDO04.rdo') size 100 m
4 datafile 'C:\oracle\product\10.1.0\oradata\orcl\testdb\system01.dbf' size 32m
5 SYSAUX DATAFILE 'C:\oracle\product\10.1.0\oradata\orcl\testdb\SYSAUX.DBF' SIZE 325M
6 undo tablespace testundotbs
7 datafile 'C:\oracle\product\10.1.0\oradata\orcl\testdb\undo01.dbf' size 40 m
8 default temporary tablespace test_temptbls
9 tempfile 'C:\oracledb\testdb\tempo1.dbf' size 40 m
10 character set WE8MSWIN1252
11* national character set AL16UTF16
12 /
create database db_test
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-01504: database name 'DB_TEST' does not match parameter db_name 'orcl'
create spfile = 'C:\oracle\product\10.1.0\db_1\database\spfiledb_test.ora' from pfile = 'C:\oracle\product\10.1.0\admin\orcl\pfile\init.ora'
ERROR at line 1:
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file
'C:\ORACLE\PRODUCT\10.1.0\ADMIN\ORCL\PFILE\INIT.ORA'
Message was edited by:
user525645

i have the init file which contains my database name.i have tries asking one sir regarding this. he checked out my problem but couldnt get the solution.he told he'll check it out and tell...he 's telling ther is 25% chance in installation problem.
my init.ora file
# Copyright (c) 1991, 2001, 2002 by Oracle Corporation
# Cache and I/O
db_block_size=8192
db_cache_size=25165824
db_file_multiblock_read_count=16
# Cursors and Library Cache
open_cursors=300
# Database Identification
db_domain=""
db_name=db_test
# Diagnostics and Statistics
background_dump_dest=C:\oracle\product\10.1.0\admin\orcl\bdump
core_dump_dest=C:\oracle\product\10.1.0\admin\orcl\cdump
user_dump_dest=C:\oracle\product\10.1.0\admin\orcl\udump
# File Configuration
control_files=("C:\oracle\product\10.1.0\oradata\orcl\testdb\control01.ctl", "C:\oracle\product\10.1.0\oradata\orcl\testdb\control02.ctl", "C:\oracle\product\10.1.0\oradata\orcl\testdb\control03.ctl")
db_recovery_file_dest=C:\oracle\product\10.1.0\flash_recovery_area
db_recovery_file_dest_size=2147483648
# Job Queues
job_queue_processes=10
# Miscellaneous
compatible=10.1.0.2.0
# Pools
java_pool_size=50331648
large_pool_size=8388608
shared_pool_size=83886080
# Processes and Sessions
processes=150
# Security and Auditing
remote_login_passwordfile=EXCLUSIVE
# Shared Server
dispatchers="(PROTOCOL=TCP) (SERVICE=orclXDB)"
# Sort, Hash Joins, Bitmap Indexes
pga_aggregate_target=25165824
sort_area_size=65536
# System Managed Undo and Rollback Segments
undo_management=AUTO
undo_tablespace=UNDOTBS1
Message was edited by:
user525645

Problem facing while creating DataSource through visual admin utility

Hi,
I have created my database on shw6ur-3\tdemand_1 machine where shw6ur-3 is machine name and tdemand_1 is database instance. Still now we used to create database on the sqlserver machine without databaseinstance . This is first time we have installed separate database instance tdemand_1 on the machine. I am entering parameter through visual admin->serverices-> JDBC connector to create database parameter are server name: shw6ur-3\tdemand_1 and database:ABC.
But it is not allowing me to create the DataSource.
I am having the doubt on server name.
Does anybody know how to create DataSource to connect to particular database on particular database instance.
regards,
Chandan

If you connect as sys you have to specify that you want to connect in the role of sysdba or sysoper.
In the connection dialog you'll find a drop down box where you select sysdba instead of normal.
Timo

Problem facing while creating a SOA-MDS Connection in JDEVELOPER

Hi,
I am trying to create a new SOA-MDS connection by choosing the RESOURCE PALETTE > NEW-CONNECTION > SOA-MDS.. When I am selecting connection it's not populating the Select MDS Partition dropdown. Its giving the error :Oct 18, 2012 7:17:48 PM oracle.tip.tools.ide.common.resourcepalette.adapter.mds.DBConnectionInfo
WARNING: Error reading db partitions for connection name MDS_CONN. Reason :
Oct 18, 2012 7:17:48 PM oracle.tip.tools.ide.common.resourcepalette.adapter.mds.DBConnectionInfo
Any Suggestions Regarding This issue....
Thanks in Advance..
Edited by: 947267 on Oct 19, 2012 4:11 AM

I uninstall my Jdeveloper and created new MDS connection now its working..

Problem Facing while analyzing Dim/Fact Table % using RSRV

Hi All,
When we analyzing the infocube in RSRV to see percentage of Dimension tables, system is showing 0% for all the dimensions and also for Fact tables.
But data is existing in fact table of infocube and also in dimensions tables, when we see in SE11.we also executed report SAP_INFOCUBE_DESIGNS in SE38, in their also we are not able to find any entry for particular infocube.Please advice on this ASAP.
Regards
Manoj

Hi,
Check whethere the statistics for the cube is run. If not refresh the stats ans then chk in RSRV or in SAP_INFOCUBE_DESIGNS you will get the ratio betwene ur dim and fact table
Hope it helps.
Regards,
Malar B

Problems faced when using xsl:include and extension functions

I am Working in XML and XSLT using Oracle's XML Parser V2.
Previously i had worked in Microsoft technology using MSXMLParser.
I am facing some problems in XSLT. They are as below...
1. Using <xsl-include href="Somexsl.xsl">
the oraclexmlparser processor is giving the error : XSL-1002: Error while processing include XSL file (no protocol: Submenu.xsl).
* Can u tell me why i am getting this error, and what is the fix for this.
The same case with <xsl:import> too.
2. In case i have to write some functions in the previous WD of xsl i used these statements
<?xml version='1.0'?>
<!DOCTYPE PageRoot SYSTEM "../../Common/dtd/PageNavBar.dtd">
<xsl:stylesheet
xmlns:xsl="http://www.w3.org/TR/WD-xsl"
xmlns:html="http://www.w3.org/TR/REC-html40"
result-ns="">
<xsl:script xmlns:xsl="uri:xsl"><![CDATA[
var strWebContentPath = "/SurSITE/Content/";
var strWebImagePath = "/SurSITE/sursitegraphics/";
function IncScript()
return "<script language='javascript' src='/SurSITE/Includes/avalidations.js'></script>";
]]>
</xsl:script>
To call the function i used this
<xsl:eval no-entities='true'> IncScript();</xsl:eval>
* Can u tell me how do i do this now, i tried with the code above using the current name space (<xsl:stylesheet version="1.1"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform" />)
Please use the example given above.
I will be very greatfull to u if u can give me some suggestion or help for the above said problems.
Thanking you and eagerly waiting for your reply(s).
null

The current version is "1.0" not "1.1"
You haven't included the code for what your <xsl:include>
statement looks like, which seems to be what it's complaining
about...
XSLT 1.0 has no <xsl:eval>, this is a microsoft specific tag
from a pre-XSLT-1.0 version.
XSLT 1.0 has no <xsl:script> element either.

Problem facing while connecting to GPRS for Nokia ...

When I am connecting to GPRS or while doing switch on of my nokia 3110 it screen goes blank and it automatically switch off and switch on.

Hi
I was facing this problem all of a sudden when i use Sigle sign-on method to connect to SAP.
It throws me from my connection process when i reach the code to connect to the company database.
So i uninstalled all SAP components and reinstalled them again (based on one of the earlier post )... this has sorted my issue.
Thank you for your response
Regards
Mini

Rep-0756 problem facing while opening the report in 10g

Hi,
I am facing problem while opening RDF in oracle 10g.
I follow the next steps.
1. Open the RDF in 10g.
2. Open the PLL in report builder and compile that PLL and save in same path where report located.
3. reattach the library with RDF.
4. Close the RDF
5. Reopen the RDF and facing the error.
6. REP-0756- unable to open attached............
7. I set the report_path in Registry also where PLL exists
Please give me the solution for this problem
Waiting for quick reply.
ashok

Thank you fs,
I am also facing the similar issue in reports 10g, I am keeping the .pll file in my local machine say c:\me\reports\xyz.pll. When I am opening this pll, I am getting the error REP-0756 though the path 'c:\me\reports\' is added to the REPORTS_PATH. Your suggestion resolved the issue.
Many thanks,
Lokesh.

Error while using WLST to create a new managed server

Hi All,
I am trying to create a managed server using following code a
"create_server.py"
------------+++++-----------
from java.util import *
from javax.management import *
import javax.management.Attribute
print 'starting the script .... '
connect('weblogic1','barbie@135','http://smart:7001')
edit()
startEdit()
print 'CREATE MANAGED SERVER: Test_Server'
Test_Server1 = cmo.createServer('TestServer1')
Test_Server1.setListenPort(7002)
Test_Server1.setAutoRestart(true)
Test_Server1.setAutoKillIfFailed(true)
Test_Server1.setRestartMax(2)
Test_Server1.setRestartDelaySeconds(10)
Test_Server1.getServerStart().setJavaHome(jvmlocation)
Test_Server1.getServerStart().setJavaVendor('Oracle')
Test_Server1.getServerStart().setArguments('-Xms128m -Xmx256m -Xns64m -Xgcprio:pausetime')
print 'ADD MANAGED SERVERS TO CLUSTER'
Test_Server1.setCluster(dizzyCluster)
print 'ADD MANAGED SERVERS TO MACHINE'
Test_Server1.setMachine(Machine_1)
save()
activate(block="true")
disconnect()
print 'End of script ...'
exit()
-----------------------+++++++++++--------------
and i am running it through WLST. but i am getting some error as
CLASSPATH=C:\oracle\MIDDLE~1\patch_wls1035\profiles\default\sys_manifest_classpa
th\weblogic_patch.jar;C:\oracle\MIDDLE~1\patch_oepe1050\profiles\default\sys_man
ifest_classpath\weblogic_patch.jar;C:\oracle\MIDDLE~1\patch_ocp360\profiles\defa
ult\sys_manifest_classpath\weblogic_patch.jar;C:\oracle\MIDDLE~1\JROCKI~1.2-4\li
b\tools.jar;C:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\oracle\M
IDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\oracle\MIDDLE~1\modules\features\w
eblogic.server.modules_10.3.5.0.jar;C:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\web
services.jar;C:\oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\oracle\MID
DLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;
PATH=C:\oracle\MIDDLE~1\patch_wls1035\profiles\default\native;C:\oracle\MIDDLE~1
\patch_oepe1050\profiles\default\native;C:\oracle\MIDDLE~1\patch_ocp360\profiles
\default\native;C:\oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\oracle\MID
DLE~1\WLSERV~1.3\server\bin;C:\oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\oracle\
MIDDLE~1\JROCKI~1.2-4\jre\bin;C:\oracle\MIDDLE~1\JROCKI~1.2-4\bin;C:\oracle\prod
uct\10.1.0\db_1\bin;C:\oracle\product\10.1.0\db_1\Apache\Perl\5.00503\bin\mswin3
2-x86;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WI
NDOWS\System32\Wbem;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\Program Files\
Java\jdk1.6.0_05\bin;C:\oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
Your environment has been set.
CLASSPATH=C:\oracle\MIDDLE~1\patch_wls1035\profiles\default\sys_manifest_classpa
th\weblogic_patch.jar;C:\oracle\MIDDLE~1\patch_oepe1050\profiles\default\sys_man
ifest_classpath\weblogic_patch.jar;C:\oracle\MIDDLE~1\patch_ocp360\profiles\defa
ult\sys_manifest_classpath\weblogic_patch.jar;C:\oracle\MIDDLE~1\JROCKI~1.2-4\li
b\tools.jar;C:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\oracle\M
IDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\oracle\MIDDLE~1\modules\features\w
eblogic.server.modules_10.3.5.0.jar;C:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\web
services.jar;C:\oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\oracle\MID
DLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;C:\oracle\MIDDLE~1\utils\config\
10.3\config-launch.jar;C:\oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbynet.j
ar;C:\oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\oracle\MIDD
LE~1\WLSERV~1.3\common\derby\lib\derbytools.jar;;
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
wls:/offline> execfile(c:/create_server.py)
Traceback (innermost last):
(no code object) at line 0
File "<console>", line 1
execfile(c:/create_server.py)
^
SyntaxError: invalid syntax
wls:/offline> execfile('c:/create_server.py')
starting the script ....
Connecting to http://192.168.1.2:7001 with userid weblogic1 ...
Traceback (innermost last):
File "<console>", line 1, in ?
File "c:/create_server.py", line 5, in ?
File "<iostream>", line 22, in connect
File "<iostream>", line 646, in raiseWLSTException
WLSTException: Error occured while performing connect : Error getting the initia
l context. There is no server running at http://192.168.1.2:7001
Use dumpStack() to view the full stacktrace
wls:/offline> execfile('c:/create_server.py')
starting the script ....
Connecting to http://192.168.1.2:7001 with userid weblogic1 ...
Traceback (innermost last):
File "<console>", line 1, in ?
File "c:/create_server.py", line 5, in ?
File "<iostream>", line 22, in connect
File "<iostream>", line 646, in raiseWLSTException
WLSTException: Error occured while performing connect : Error getting the initia
l context. There is no server running at http://192.168.1.2:7001
Use dumpStack() to view the full stacktrace
wls:/offline> execfile('c:/create_server.py')
starting the script ....
Connecting to http://smart:7001 with userid weblogic1 ...
Traceback (innermost last):
File "<console>", line 1, in ?
File "c:/create_server.py", line 5, in ?
File "<iostream>", line 22, in connect
File "<iostream>", line 646, in raiseWLSTException
WLSTException: Error occured while performing connect : Error getting the initia
l context. There is no server running at http://smart:7001
Use dumpStack() to view the full stacktrace
wls:/offline> dumpStack()
This Exception occurred at Fri Sep 16 19:51:07 IST 2011.
javax.naming.CommunicationException [Root exception is java.net.ConnectException
: http://smart:7001: Destination unreachable; nested exception is:
java.net.ProtocolException: Tunneling result unspecified - is the HTTP s
erver at host: 'smart' and port: '7001' a WebLogic Server?; No available router
to destination]
at weblogic.jndi.internal.ExceptionTranslator.toNamingException(Exceptio
nTranslator.java:40)
at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLIni
tialContextFactoryDelegate.java:788)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLIni
tialContextFactoryDelegate.java:366)
at weblogic.jndi.Environment.getContext(Environment.java:315)
at weblogic.jndi.Environment.getContext(Environment.java:285)
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialCont
extFactory.java:117)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:6
67)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at weblogic.management.scripting.WLSTHelper.populateInitialContext(WLSTH
elper.java:520)
at weblogic.management.scripting.WLSTHelper.initDeprecatedConnection(WLS
THelper.java:573)
at weblogic.management.scripting.WLSTHelper.initConnections(WLSTHelper.j
ava:313)
at weblogic.management.scripting.WLSTHelper.connect(WLSTHelper.java:203)
at weblogic.management.scripting.WLScriptContext.connect(WLScriptContext
.java:61)
at weblogic.management.scripting.utils.WLSTUtil.initializeOnlineWLST(WLS
TUtil.java:147)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyObject.invoke(Unknown Source)
at org.python.pycode._pyx36.connect$1(<iostream>:16)
at org.python.pycode._pyx36.call_function(<iostream>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.pycode._pyx42.f$0(c:/create_server.py:5)
at org.python.pycode._pyx42.call_function(c:/create_server.py)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyCode.call(Unknown Source)
at org.python.core.Py.runCode(Unknown Source)
at org.python.core.__builtin__.execfile_flags(Unknown Source)
at org.python.core.__builtin__.execfile(Unknown Source)
at org.python.core.__builtin__.execfile(Unknown Source)
at org.python.core.BuiltinFunctions.__call__(Unknown Source)
at org.python.pycode._pyx41.f$0(<console>:1)
at org.python.pycode._pyx41.call_function(<console>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyCode.call(Unknown Source)
at org.python.core.Py.runCode(Unknown Source)
at org.python.core.Py.exec(Unknown Source)
at org.python.util.PythonInterpreter.exec(Unknown Source)
at org.python.util.InteractiveInterpreter.runcode(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at weblogic.management.scripting.WLST.main(WLST.java:173)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.WLST.main(WLST.java:29)
Caused by: java.net.ConnectException: http://smart:7001: Destination unreachable
; nested exception is:
java.net.ProtocolException: Tunneling result unspecified - is the HTTP s
erver at host: 'smart' and port: '7001' a WebLogic Server?; No available router
to destination
at weblogic.rjvm.RJVMFinder.findOrCreateInternal(RJVMFinder.java:216)
at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:170)
at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:153)
at weblogic.jndi.WLInitialContextFactoryDelegate$1.run(WLInitialContextF
actoryDelegate.java:345)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
146)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLIni
tialContextFactoryDelegate.java:340)
... 52 more
Caused by: java.rmi.ConnectException: Destination unreachable; nested exception
is:
java.net.ProtocolException: Tunneling result unspecified - is the HTTP s
erver at host: 'smart' and port: '7001' a WebLogic Server?; No available router
to destination
at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:470)
at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:321)
at weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java
:254)
at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:197)
at weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:238
at weblogic.rjvm.RJVMFinder.findOrCreateInternal(RJVMFinder.java:200)
at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:170)
at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:153)
at weblogic.jndi.WLInitialContextFactoryDelegate$1.run(WLInitialContextF
actoryDelegate.java:345)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
146)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLIni
tialContextFactoryDelegate.java:340)
at weblogic.jndi.Environment.getContext(Environment.java:315)
at weblogic.jndi.Environment.getContext(Environment.java:285)
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialCont
extFactory.java:117)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:6
67)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:198)
at weblogic.management.scripting.WLSTHelper.populateInitialContext(WLSTH
elper.java:520)
at weblogic.management.scripting.WLSTHelper.initDeprecatedConnection(WLS
THelper.java:573)
at weblogic.management.scripting.WLSTHelper.initConnections(WLSTHelper.j
ava:315)
at weblogic.management.scripting.WLSTHelper.connect(WLSTHelper.java:203)
at weblogic.management.scripting.WLScriptContext.connect(WLScriptContext
.java:62)
at weblogic.management.scripting.utils.WLSTUtil.initializeOnlineWLST(WLS
TUtil.java:148)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyObject.invoke(Unknown Source)
at org.python.pycode._pyx36.connect$1(<iostream>:16)
at org.python.pycode._pyx36.call_function(<iostream>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.pycode._pyx42.f$0(c:/create_server.py:7)
... 24 more
javax.naming.CommunicationException [Root exception is java.net.ConnectException
: http://smart:7001: Destination unreachable; nested exception is:
java.net.ProtocolException: Tunneling result unspecified - is the HTTP s
erver at host: 'smart' and port: '7001' a WebLogic Server?; No available router
to destination]
please help me for this..
Edited by: Sharad Jain on Sep 17, 2011 8:46 AM

Hi Sharad,
Put ('') in your command,
wls:/offline> execfile('c:/create_server.py')
Regards
Edited by: scapy on Oct 6, 2011 4:15 PM

Problem faced while using BAPI_FIXEDASSET_CREATE1 to create assets in SAP

Similar Messages

Maybe you are looking for