Problem facing in partner rofile creation !

After adding new message type in the partner profile...When i check it by cntr+f2 i am getting the warning as
" No message control entry for the following entry "
Will it affect my idoc processing ?
can any one help !

Hi,
I am not sure if you have missed any step... but check if helpful.
Put the msg type in the inbound/ outboud paramenter section in the partner profile corresponding to any partner type (say 'LS'). Hope you have done this.
Now, you have to double click the msg type which will take you to a new screen, where you have to enter various other parameters depending on your requirement, like basic type, msg control etc.
Finally save/activate it. It should work now.
Regards, Tapas
<Reward pts if useful or answered>

Similar Messages

Problems faced by me using the 5700

I bought the nokia 5700 a month ago and it has been this way since then. I face a few problems which i wish were added in a update for the firmware by nokia. Is there anyway to inform nokia about this?
Problems faced by me:
1)In the log after switchin the mobile on and after about a day or two when i call from the log i.e pressing green button on a contact or going into options and selecting voice call. Nothing happens. No call can be made from the log. It is very annoying cause everyone directly calls from the log upon seeing the miss call... Though the call can be made from the contacts list and everywhere else, u can dial a number and call. The problem is just with the log(fixed by turning the mobile off then on but eventually the same thing happens)
2)The time and date when set as a screensaver does not appear all the time, the screen maybe blank or time maybe shown.
3)This is going to be very weird, i have a habit of just seeing emergency numbers such as 911 and 112 appear when the phone is locked, when i dial these keys sometimes the numbers appear and sometimes they dont.(again fixed by turning the mobile off then on)
4)This is the BIGGEST FLAW FOR THE 5700 FOR ME, if you have noticed (i dont know abt other 5700's but this is the case with mine) in the log if you have contacts having numbers which can be divided into home ,mobile,etc. When you see the log no matter wherever the call came from you see a mobile icon.This again is very annoying cause you dont come to know where the call came from and after a miss call, u would have to go in options, use number, edit number and then see it. Or by calling and seeing the number for a brief moment. So you can accidentally dial at someones home though you dont want to and even they didnt call from their home.
Anyone having these problems?
Nokia 5700 has been out for 3 months over here i guess we deserve updates for the firmware. Dont we?
And though i get these problems i can still say with dignity that 5700 is cool.
btw If i format do i lose any themes installed on the phone memory? Cause i downloaded this theme from nokia once and you dont get it any more for some odd reason.

Go to Nokia Service nearet your location. Ask them for a solution.

TWO VERY TOUGH SUPPORT PROBLEMS FACED AND SOLVED IN REAL TIME

pls any body post two very tough support problems faced and solved in real time.
my id is: [email protected]

Hi Priya.,
For example client wants his customer legacy number in XD01 master data which is not there in Standard SAP.we can satisfy the requirement with USER EXIT
2) If the client wants customer Phone number in the sales order we can use user exit to satify the requirement
These are not provided in Standard SAP & we should work out on alternative way
REWARD if helpfull
Thanks & Regards
Narayana

Problems Facing in BDC

Hi All,
I want to know the problems facing in Uploading Xternal file in BDC.
Its very Urgent . Points will be rewarded to good ans.
Bye.

Hi
Many problems can occur while doing bdc like field mis match can occur,Data over lapping between fields etc
Regards
Shibin

Facing error while invoice creation in AR.

Facing error while invoice creation in AR as Please complete your tax accounting flexfield. We are creating invoice through API.
Regards
Sridhar

Hi,
Please go through the below Note ID.
Autoinvoice Error On Tax Codes - Please Complete Your Tax Accounting Flexfield [ID 1469285.1]
Regards,
Raju.

WE20 - Partner profile Creation

Hi all
I am an FI consultant and working on task - generating the I docs for the Billing documents. We have configured the Out put determination for Billing documents.
I have to create the partner profile for the specified customer in WE20.
Do we have to maintain both Inbound and Out bound parameters?
Also please guide me what are the parameters i need to select for adding in both the cases for the Customer partner profile creation ?
Please let me know.
Thanks
Meenakshi

Hi
You need to work with Basis Consultant and as well as with ABAP Consultant
Settings for customer
You need create Partner Profiles, Partner Type, Agent ,
Outbound Parameters
Partner Role : BP, Message type:INVOIC, Message variant MM,
Outbound Options tab
Receiver Port: XXXXX
Pack. Size: 1
Output Mode
Select Transfer Idoc Immed- In general depends on your requirement
Idoc Type INV0IC01
Check the Check box for Cancel Processing After Syntax Error
Message Control Tab
Application V3
Message type: RD04
Process code : SD08
Settings for Vendor
Define Partner Type
Agent
Inbound Parmeters
Message type : INVOIC
Message Variant: xx
Inbound Options Tab
Process code : INVG
Check the check box Cancel Processing After Syntax Error
Processing by Functional Module
Trigger by background program
Select Trigger Immediately u2013 Ingeneral
These settings are needed
Regards
Odaiah Pelley

My iphone 5 is problem facing like that. when i switch off my iphone5 then plugh for charge with data cable or charger adapder or only data cable with no power connect phone is starting why? means on my phone Why? any one can explane this matter please. s

my iphone 5 is problem facing like that. when i switch off my iphone5 then plugh for charge with data cable or charger adapder or only data cable with no power connect phone is starting why? means on my phone Why? any one can explane this matter please. switched off my phone but on without power button . what is the problem?
Thanks
s.m slim

all iphone is same like that

Can i get some live problems faced on support for sap hr

Can i get some live problems faced on support for sap hr and how were they resolved? Please give a step by step detail of the sol.
Dear
Member, of all the Issues raised in the forum some of the issues are support issues you can have a look at all these threads
Please read the forum rules before Posting the Query

Hi,
Please be with this SDN.SAP Forum, you will get solutions of all types of queris.
Regards,
Ram Aware

Problem in creation of partner function creation.

Hi all,
During customer Master upload using LSMW direct method, Iam getting this problem.
while creating Sales view using XD01, three partner function VE (Sales Representative), SH (Ship-to party), ZI (Front Office) are getting displayed in the last tab of sales view creation.
Because of some customizing,value for SH is getting populated automatically. But the values for VE & SH are not getting populated from the flat file.
But the values are present in the respective field (KTONR) and able to see in the display convert data.
If I enter the manual value during runtime in LSMW, it accepts the value. Since it involves huge amount of data, manual entry for records is not possible.
Kindly provide the solution.
Regards
Narasingam.B

This problem can be solved by proper customizing.
Regards
Narasingam

LSMW Upload SalesOrder Creation:problem in assigning Partner type SH and SP

Hi
I'm trying to upload sales order creation data using LSMW -BAPI Method
Business Object : BUS2032
Method : CREATEFROMDAT2
Message type : SALESORDER_CREATEFROMDAT2
Basic Type : SALESORDER_CREATEFROMDAT202
and I'm passing the following header data
Sales Order Type, Sales organisation, Distribution Channel, Division, Sold To Party, Ship To party,
Purchase order number, PO Date, Requested delivery date, Order Reason, Payment terms, Incoterms part1, Incoterms part2, Document Currency.
and the following item data
MATERIAL NUMBER
Order quantity
Storage Location
Item Category
Item Usage
Reason for Rejection
Plant
Net Weight
Gross Weight
Condition Type
Amount
Internal Order Number
I'm assigning the header data to structure E1BPSDHD1
and Item data to E1BPSDITM,E1BPSDITM1
and Partner data to structure E1BPPARNR.
When I am assigning Partner data to the structure E1BPPARNR, I want to assign both sold-to-party and ship-to-party ,(because I have two source fields of this type) but there is only target field related to the partner data , here I am assigning partner type as SP and partner number as sold-to-party, still there is an unassigned field ship-to-party, for this field I am unable to find a relevant target field so please help me how can I assing These two flat file fields (sold-to-party,ship-to-party)
Looking for further more information : if there is many sold-to-party's and many ship-to-party's how can I go that in this situation i.e maintaining Many to Many relationship using LSMW tool
Thanks in advance
regards
Rajasekhar

Here is what you have to do.
In field mapping, double click on the field PARTN_NUMB (or any field of that structure) in change mode. This opens up the code editor. There just enter the following code. I am assuming you are doing only these fields. But if you are mapping more fields of this structure, you have to map them here.
E1BPPARNR-PARTN_NUMB = ORDERHEADER-KUNAG.
E1BPPARNR-PARTN_ROLE = 'AG'.
E1BPPARNR-ITM_NUMBER = '000000'.
*-- add more field mappings here, if needed
TRANSFER_RECORD.
*-- Now pass the Ship-to record
E1BPPARNR-PARTN_NUMB = ORDERHEADER-KUNWE.
E1BPPARNR-PARTN_ROLE = 'WE'.
E1BPPARNR-ITM_NUMBER = '000000'.
*-- Add more partners if needed by copying the above code.
Remember, you need to do TRANSFER_RECORD only that many times as you have the partners. There will be one 'TRANSFER_RECORD' at the end of this structure, so keep that in mind.
Srinivas

Problem when saving business partner on creation or changing

When i create a business partner in fmcac1 it is taking an eternity when saving. i am also encountering the same problem when saving changes in transaction fmcac2. its hanging when i click the save button but if i terminate the job the changes woul have been made. what might be causing the problem.
When i terminate the process am getting the message as shown below
Dev: SAP System message
Panic: Unrecoverable errors occured

well there are really many possibilities for that.
have you once waited, if the task will finish?
if it does finish i would suggest to do a SQL-Trace with TA ST05.
If this is possible, the performance trace will show you quite by detail where your process time is beeing used.
To find out why so much time is used in that position then is another thing.
But once you got the problem identified you should be able to exlude some reasons like (inperformant selects or such).

Problem In Business Partner Creation

Hi to all,
I have around 900 BP in BP master which i export from another company. Now i try to create a new BP it gives error that
'This entry already exists in the following tales business master OCRD message (131-183).I checked in database as well as in Business Master form but i did'nt found any BP.
Regards

Dear Mr Krishna
The issue is related to corruption in database. So for this you had to log a message on SAP Channel Partner portal.
Also please donot run Restore on the production databse with the approval of SAP Support.
Please check Note no 752031 in this regard.
Regards
Vikas Rastogi
Edited by: Vikas Rastogi on Aug 22, 2008 8:20 PM
Edited by: Vikas Rastogi on Aug 22, 2008 8:20 PM

Problem in business partner creation in GTS

Hi experts,
To create business partner in GTS I have used BAPI_BUPA_CREATE_FROM_DATA. It is creating business partner but it is not updating the table u2018 /SALSLL/ADRCONu2019 which is necessary for SPL check in GTS. Is there any functional module / RFC specific to GTS which will create a business partner as well update the u2018 /SALSLL/ADRCONu2019 table?
I also tried to create a custom RFC by recording the transaction FS00001 in GTS(sap netweaver 2004s) for the same purpose. This RFC is working fine in GTS system ( without RFC call) but while calling this RFC from another R/3 system(4.6C) it is giving the error u2018Control Framework : Fetal Error u2013 GUI cannot be reachedu2019 . Any solution or workaround for this issue?
with regards,
S.Janagar

Hi
Can you kindly suggest the SAP note number please. Even we ar efacing porblem to transfer ECC BP's to GTS.
we are creating BP's in CRM and replicating them in ECC and wish to transfer these to GTS for SPl screening - this is the sceranio. Would be glad if you can suggest on how to achieve this.
Thanks
Rajan

Problem in multi master replication creation using DBA Studio -- replication

Hi,
I am trying to create multi master replication using DBA studio but facing following problem at the time of master group creation.
ORA-04052 error occured when looking up remote object SYS.SYS@CBOLDATA
ORA-00604 error occured at recursive SQL level 2
ORA-01017 invalid username/password, logon denied
ORA-02063 preceding line from CBOLDATA
If you want to know how I am trying the whole thing then here is the way I am doing comfiguration.
First I have created master site which is created successfully.
Here I have used two database named UPP817 & CBOLDATA
Step of master site creation is followed like this.
1. Master Site addition (Added both UPP817 & CBOLDATA using SYSTEM username)
2. Default User (No change is done, Default schema and password taken)
3. Master Site Schema (Added SCOTT/tiger)
4. Scheduled Link (No change is done, Default values taken)
5. Purge (No change is done, Default values taken)
6. Finished successfully
Master group creation there is three option available
1. General (Only value of Name is given)
2. Object (No object added)
3. Master Sites (It takes UPP817 by default as a master defination site then as a Master Site I have added CBOLDATA)
when I pressed on Create It gives me the error listed above.
I really appreceate your help
Mukesh

Create public database link at master site database for CBOLDATA.
Also see that you are using SNMP protocol and Oracle Pipe at both
databases. This will be usefull while making replication from remote
place.
I hope this will work.
regards
Avinash Jadhav

Archive Link Authorization problem for Business Partner.

Hi Experts,
Currently we are attaching documents to respective objects through Tr. OAWD & these documents are available in service for object as attachment, until this it is working fine.
But we are facing problem of authorization for archive link of ISU- Business Partner. Letu2019s say we had two users USER-A & USER-B responsible to upload documents of Business partners started with 1 & 2 respectively.
We needed authorization control for USER A&B so that,
USER-A should upload documents for Business Partner 1001 to 1999
& USER-B should upload documents for Business Partner 2001 to 2999
we need to know can we restrict USER A&B so that they can not upload documents for Business Partner for which they are not responsible. we allready checked the roles "SAP_BC_SRV_ARL_* " but not found useful to restrict USER A&B.
Thanks in advance....

Hi Sam,
as this sounds like you search for suitable authorization objects I think that the authorization trace in transaction ST01 could be useful for you. For further information please see the following link: http://wiki.sdn.sap.com/wiki/display/PLM/AuthorizationTraceintransactionST01
Best regards,
Christoph

Problem facing in partner rofile creation !

Similar Messages

Maybe you are looking for