Problem FCP6. It is impossible to create multicamera clip with DV and HDV.

Problem FCP6. It is impossible to create multicamera clip with DV and HDV. I wish to create the multicamera clip from files dv and hdv. But the program informs that it is impossible because the different size frame. Video dv and hdv in the multicamera are incompatible? (Excuse for possible errors in the text)

Ken Summerall, Jr. wrote:
Do I need to export this as a movie before I can use it to be allowed to Multiclip with the DV footage?
How else are you going to use it?
I thought somehow there was a way to use the sequence itself into the multiclip.
Like a nested sequence used as a clip.
Thanks for your help.

Similar Messages

  • Fcx-creating multicam clip with two different frame rate

    I have created a multicam clip with 2 clips, one shot with iphone 3gs, 15 fps, and the otherone with a dslr
    i remember that with fc7 the main task to accomplish this was to shot with same setting but now it seems to work althought they are not same.
    how final cut process the clips when tries to sync them ?
    thams

    I have created a multicam clip with 2 clips, one shot with iphone 3gs, 15 fps, and the otherone with a dslr
    i remember that with fc7 the main task to accomplish this was to shot with same setting but now it seems to work althought they are not same.
    how final cut process the clips when tries to sync them ?
    thams

  • Themes in 8.0.1--Will they create quality loss with DV and HDV

    I asked this question somewhere else, but didn't get a response. Maybe I wasn't clear. In Steve's book, he states what to stay away from, but he never really mentions themes. He says maps and backgrounds, but nothing about the themes.

    I would expect it to be widescreen on all the television sets.
    You don't have to do this in two projects. You can do it in one project in separate sequences, just change the settings before you capture the media and make a new sequence in that setting. You could combine the HD material into the DV anamorphic sequence to make a single sequence. Export that. Fix it in QT and then make one iDVD movie if you wanted.

  • How to enable "Create Multicam Clip"?

    Hi,
    First post.  I have footage from a Canon XHA1 @ 1920 x 1080 and a Canon XA10 @ 1440 x 1080.  If I multi-select these clips in the event viewer, I cannot get the "Create Multicam Clip" menu to enable.  I thought I woudn't have to do any conversions to make this happen in X.  I'm using the free trial right now.
    Thanks,
    Howie

    Pilot error, I think.  I haven't verified this yet, but it looks like the clips MUST be part of the same event.  Sort of makes sense.

  • FCPX renders .mov files to AppleProRes to create multicam clip

    I use two .mov files to create multicam  clip. During this operation FCPX renders these .mov files and create Apple PreRes files that are10x larger.
    Question: Can I create multicam clip without re-rendering? I understand that it is easier to edit using these large files, but I can edit single clip using original .mov file, so, it is not mandatory.

    It optimizes the files. Switch this function off in Playback preferences.

  • Why is "Create Multicamera Clip" disabled on the clip menu?

    I cannot enable "create multicamera clip" on the clup menu.  I was just doing this the other day, how can I get the feature re-enabled.
    oops - never mind ---
    I must have been out cruising the galaxy, there was only 1 clip selected!  Well, at least I finally installed my pending updates.
    Message was edited by: danschlack

    Hey! I tried both suggestions but even the self contained quicktime file has the green screen frames popping up.
    I just dont get it, it's infuriating!
    I used "chroma keyer" effect on the clip, only enable "key on saturation", the green screen disappears, I place clip on V2 and image on V1. Image is then visible where the green screen was. All is well until the last frame before a next clip because on that ast frame the green screen appears again. Where am I going wrong? Please help!

  • Modified Files on FCPX... Random files in event folder(that I used to make a multicam clip) become modified and unusable. Is there anything i can do to prevent this?

    Since I upgraded to Mavericks, every time I create a multicam clip on FCPX, random files(that were used to make the multicam clip) become modified and unusable(in High Quality). Is there anything I can do to prevent this?
    I've tried transcoding, creating proxy media, creating optimized media, plus I've tried none of the above. Thing is, no matter what I do, it still happens(to random files) "after" I make the multicam clip. Is there a setting or something that was accidentally enabled by me or the upgrade?
    BTW: Everything seems to work fine when 'playback' is set to proxy. The problem is when I'm ready to export and switch 'playback' to High Quality.

    I had this same issue! But fixed it by going into the finder, finding the event, and delted the files out of the "High Quality Media." My project then refreshed to normal and no red modified file slides. The cool part: I din't even shut fcpx down to mess with the files in the finder. It all worked like a charm.
    Good luck!

  • It says that "there was a problem connecting to the server". What's wrong with this, and how can I deal with this problem?

    I just got my new iPad Mini2, and when I choose "sign in with your apple ID", it says that "there was a problem connecting to the server". What's wrong with this, and how can I deal with this problem?

    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

  • I have created my site with Muse and have uploaded to an external ftp hosting, now my secure log in will not work because I am not using BC. Is there a way to create a secure log in that will work with out being forced to use BC?

    I have created my site with Muse and have uploaded to an external ftp hosting, now my secure log in will not work because I am not using BC. Is there a way to create a secure log in that will work with out being forced to use BC?

    Hi
    Secure Zone login feature will only work if you host your website with Business catalyst.
    Please take a look to this as an alternative
    Password Protect Pages Widget for Adobe Muse
    Also, check this thread,
    Re: Can I create a login/password protection in Muse for a HTML5 page or two?

  • How to Create a Table with Merge and partitions in HANA

    Hi,
    What is the best way to create a Table with MERGE and PARTITION and UNLOAD PRIORITIES.
    Any body can you please give me some examples.
    Regards,
    Deva

    Ok,
    1) the UNLOAD PRIORITY has nothing to do with the order of data loads in your ETL process
    2) Unloading of columns will happen automatically. Don't specify anything specific for the tables, then SAP HANA will take care about it
    3) Not sure where you get your ideas from, but there is no need to manually "flush" tables or anything like that. SAP HANA will take care of memory housekeeping.
    4) Partitioning and how to specify it for tables has been largely documented. Just read up on it.
    5) Delta Merge will happen automatically, as long as you don't prevent it (e.g. by trying to outsmart the mergedog rules)
    Seriously, I get the impressions that this list of requirements is based on some hear-say and lack of actual information and experience with SAP HANA. There are a couple of extensive discussions on data loading optimization available here in SCN and on SAPHANA.COM. Please read those first.
    All this had been discussed broadly a couple of times.
    - Lars

  • What are the best options for creating a PDF with bookmarks and a hyperlinked TOC?

    What I'm interested in is whether or not there is an alternate process I could follow that would side step Word 2011's inability to export to PDF with bookmarks and hyperlinked TOCs. How do you create PDF documents with bookmarks and hyperlinked TOCs in your documents?
    Some background:
    In Word 2010 and 2013 for Windows (and I'm sure this applies to older versions as well), you can export documents to a PDF file format where the exported file will carry over the bookmarks and hyperlinked table of contents. Specifically, by making specific text headers, will appear in the final PDF file as bookmarks on the side (see image taken from Adobe's website).
    Regarding the table of contents, using Word's built in Table of Contents feature successfully ports the ability to navigate to a specific section by clicking on its chapter in the table of contents to the finished PDF file.
    I've read several forum discussions that say it's not possible to do this from Word 2011, so my current solution is to just finish all documents on a Windows machine (either with parallels or a separate computer). The alternate process flow of creating a word document, exporting it to PDF, then rehyperlinking everything in Acrobat is just too time consuming to consider.

    Hi, beejasaurus
    I found a possible kluge from this discussion here
    https://forums.adobe.com/thread/1008480
    Create the hyperlinks in Word, save the file
    Open that file with Pages, export as PDF.
    The links work from that PDF.
    Note, I did not try this with TOC but it worked with hyperlinks embedded in the Word document

  • Need to create the document with originals and checkin that document

    HI Guys,
    My requirement is to write a method to  create the document with originals and checkin that document of DMS.
    Plz suggest the approach to get this requirement solved.
    Regards,
    RSK

    Hi Bala,
    Thanks for the reply.
    Iam writing the code under method like below.
    Importing:
    ls_doc type bapi_doc_draw2.
      APPEND is_files TO it_files.
      CALL FUNCTION 'BAPI_DOCUMENT_CREATE2'
        EXPORTING
          documentdata               = ls_doc
       IMPORTING
         documenttype               = iv_doctype
         documentnumber             = iv_docnumber
         documentpart               = iv_docpart
         documentversion            = iv_docvers
         return                     = iv_return
       TABLES
        documentfiles              = it_files.
    Iam checking with document number , document type, document part, document version... it is throwing error message as
    error while checking in and storing: version number(25).
    Please advice whether it is correct approach?
    Regards,
    RSK
    Edited by: shravan kumar ravula on Dec 22, 2011 11:24 AM
    Edited by: shravan kumar ravula on Dec 22, 2011 1:26 PM
    Edited by: shravan kumar ravula on Dec 22, 2011 1:26 PM

  • How to create a chart with x and y input arrays

    I am trying to create a chart that receives chunks of data from a while loop.  I know how to create a chart in order to append new data points to those points already in the display, but a regular chart doesn't let me specify the x axis data points.  Is there a way to create a chart with x and y array inputs?
    Thanx,
    Tom

    It's called an XY Graph. If you need an XY graph to behave like a chart, look at the shipping example called XY Chart.

  • How to create a playlist with podcasts AND music?

    I created a playlist with both podcasts and music in it. The thing is when I try to shuffle it, only music plays. When I start playing podcasts, none of my music plays. How can I make them both play at the same time and shuffle on the same playlist?

    In iTunes, you created a playlist (with songs and podcasts), and then synced that playlist to the iPod?  Or you manually created a playlist on the iPod, and manually added songs and podcasts to that playlist?  It needs to be an actual playlist that is on the iPod, not simply songs and podcasts on the iPod.
    If you have a playlist on the iPod....  In shuffle mode, only songs play.  Set the iPod to play-in-order (not shuffle).  Then, select the playlist on the iPod (by selecting Music -> Playlists from the Home screen).  With the playlist selected, press Play/Pause.  The playlist plays the song and podcasts in the order shown for that playlist in iTunes.

  • Is it possible to create a tree with drag-and-drop functionality using ajax

    I saw these samples;
    Scott Spendolini's AJAX Select List Demo
    http://htmldb.oracle.com/pls/otn/f?p=33867:1:10730556242433798443
    Building an Ajax Memory Tree by Scott Spendolini
    http://www.oracle.com/technology/pub/articles/spendolini-tree.html
    Carl Backstrom ApEx-AJAX & DHTML examples;
    http://htmldb.oracle.com/pls/otn/f?p=11933:5:8901671725714285254
    Do you think is it possible to create a tree with drag-and-drop functionality using ajax and apex like this sample; http://www.scbr.com/docs/products/dhtmlxTree/
    Thank you,
    Kind regards.
    Tonguç

    Hello,
    Sure you can build it, I just don't think anyone has, you could also use their solution as well in an APEX page it's just a matter of integration.
    Carl

Maybe you are looking for