Problem feeding sound out through an external AV proces

I'm try to feed sound from my X-Fatality, to my 7. AV rig. I've hooked everything up ok, but the sound for the rear LR and side LR?channels is being sent to the front LR speakers. I've used different inputs on the processor, and run my standalone dvd player through the same input and all worked ok, so the problem is isolated to the sound card. The software has been setup to feed a digtal ac3/dts stream to the external processor. Anyone got any ideas to the source of the problem?ThanksJohn?

AndyME,
The Audigy 2 NX cannot decode from an external source. If you input the signal from the external dri've, you'll only get a stereo signal, the card cannot process the encoded stream (and decode it into 5.). What's happening on your system is that when you enable CMSS, the card upmixes stereo to 5., you're not getting the true 5. signal from the DVD though.
The Audigy 2 ZS notebook does have this function though, so you will be able to use that with your external DVD player.
Cat
Message Edited by Catherina-CL on -02-2004 0:54 AM

Similar Messages

Morese Code sound coming through my external speakers

Recently I've been getting Morse Code sounds coming through my external speakers. It's not all the time but at least 2-3 time a day. Any idea?

If I have my cel phone near my iMac, every now and then I get a sound that could be described as Morse code like. It has no lasting effects, so I don't worry much about it.

Having problems choosing sound output through HDMI to my television, any one any ideas?

Though listed in the sounds options, I can't seem to choose a sound output to my TV through HDMI. I have sound output to headphones via the headphone socket or usb, but when I highlight to the HDMI TV option it justs returns to the top of the list, any ideas anyone?

About alsa dmix, and for the record:
On an Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz, the following are my finding about
quality/cpu when mixing two streams at 44khz:
a snippet from my .asoundrc
#converter "samplerate_best" # perfect: 16%cpu, maybe overkill
#converter "samplerate_medium" # almost perfect: 6%cpu
#converter "samplerate" # good: 4%cpu, definitely usable
#converter "samplerate_linear" # bad: 2%cpu, way better than default wine resampler
#converter "samplerate_order" # very bad: 2%cpu, like the default wine resampler
Here is the reference topic: https://bbs.archlinux.org/viewtopic.php?pid=942724
I may be wrong, but in an opensource world (code reusing), i really doubt pulseaudio could lead to better quality/cpuuse tradeoff.
Pulseaudio, being just another layer atop of alsa, could only lead to higher cpu usage.
Last edited by kokoko3k (2013-11-11 15:33:41)

Strange sound coming through external speakers

On my 2010 iMac there is a problem when *no audio* is coming out through the external speakers (connected via the headphone port).
If i play any sound (even change the volume and get the 'blip' sound) and then go back to silence, after 5 - 10 seconds I can hear a strange buzzing/hissing sound.
Even when I'm playing music there is no buzzing/hissing but when I pause the track, 5 - 10 seconds later the sound returns.
Using these speakers through my macbook there is no such problem, only the iMac.
I think this may be related to a recent software update since it is a new problem. Any ideas?
thanks.

Could there be a Ground loop in something connected to the iMac?

How I got sound out of my Audigy 2 in Bet

We all know how there's no drivers out yet for Vista Beta 2...so people are suggesting all kinds of things to try to get our SB cards to work... I have Vista Beta 2 Build 5384 installed and I have an Audigy 2 ZS card...and no matter what Audigy drivers I tried...no love. I decided to do a clean install of Vista this time and try something out...AND IT WORKS! Maybe you guys can try this out too and see if it works for you.
Here's the steps I took:
. I downloaded the latest Vista 32-bit drivers for my Audigy 2 ZS from Creative's site...the one that's November '05 and named SBAX_PCDVTBETA_US_2_08_0002.exe
2. I downloaded the latest Realtek AC'97 Vista Beta drivers from http://www.realtek.com.tw/downloads/dlac97-2.aspx?series=8&Software=True
3. Install the Sound Blaster driver, you'll have to reboot...once you reboot it should try to install the drivers but will fail...atleast with me, I kept getting a time out error saying its failed.
4. Now I don't have onboard soundon my Dell..just the SB card so I figured let me try Realtek drivers anyway... Install the Realtek driver, reboot, you should be prompted to install your soundcard driver.. I selected to let it show me the available drivers list and my Audigy was in the list...hit install and it installed the Audigy drivers for me! What the Realtek drivers have to do with anything, I don't know...but it worked for me so I'm happy
The only thing is that after testing all the speaker set ups up to 5.....5. didn't 00% work...my rear speakers and sub wouldn't produce a sound while testing while the rest of the speakers did...and then they would get distored...so I have to keep it in STEREO mode int he configuration. Doesn't matter to me since I just put my Logitech Z5500 speakers in "stereo X2" mode so sound comes out all the speakers...and the sub still will pound.
Hopefully this works for you guys who are having problems getting sound out in Beta 2...lemme know how it works!Message Edited by vice86 on 06-30-2006 07:53 PM

. The beta driver is flakey, use the XP driver
2. there is no consistant way to install the driver, upon various OS reinstalls (I have installed at least a dozen times at this point, I am testing a variety of stuff under the covers) I have gotten things to work as easy as slick install upon OS install completion... to haveing to fight tooth and nail in safe mode (on the same machine)
3. The Vista release was not a surprise, the number of major hardware vendors that have their ducks in a row with drivers is greater then those that do not. However, this is beta people, if you expect a finished product use XP... wait XP is a mismash of patchs and updates just like every other MS OS.
4. if you want perfection and things to work right out of the box, get a MAC

Hooking up sound modules through MIDI Controllers

I have an Axiom 25 MIDI Controller
and an Alesis QSR sound module.
how can i hook the module up to the axiom then get the sounds out through garageband. I did this once years ago and i just can't remember for the life of me. I have instrument cables, midi cables. I guess i'm not plugging them in in the correct order. This sounds really noobish of me, i know, but i could desperately use some help here. Thanks!

Hi. The only way to get the sounds from the QSR into GarageBand is to record the audio out from the module. You will need to go from MIDI out (using the 5pin MIDI connection not USB) on the Axiom to MIDI in on the QSR. You need to make sure that the QSR is listening to the MIDI channel the Axiom is sending on. You will then need to go from the Main L/R Audio outs on the Alesis into 'something' that GB can listen to. If you have an Audio interface then all good. Set that up as your Input Source in GB's preferences, create a Real Instrument Track, set up the correct input source/channels in GB's info pane and your good to go. If you do not have an Audio interface and are going straight into your computers built in input, then you will need a cable that is suitable to connect the outs from the QSR to the single 3.5mm-1/8" jack that your computer has.
All the best

I have a problem with the external sound of my ipod, when I take the headphones the music keeps playing and the ipod recognizes still have a headset connected. how do I get external sound out?

I have a problem with the external sound of my iPod, when I take the headphones the music keeps playing and the ipod recognizes still have a headset connected. how do I get external sound out?

- Try insering and removing the headphone plug a dozen times or so.
- Try cleaning out the headphone jack in the iPod.
- Resett he iPod. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restoe to factory defaults/new iPod
If yu still have the problem that indicates a hardware problem, likely a bad headphone jack. Yu can make an appointment at the Genius Bar of an Apple store to confirm.
If not underwarranty Apple will only exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
A third-party place like the following is less expensive. Here is one. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Problems with sound from external speakers after iOS 5.0.1 update

Have others experienced problems with external speakers on the Iphone 4 after iOS 5.0.1 update? My phone no longer rings, sounds when i receive a text message, sounds alarm, etc. Vibrate works fine and when i plug in headphones I can hear music through the headphones. Any fixes for this?

Hi Guys,
I have post eariler on another forum and I have the same problem, I have tried all the things listed here and nothing was perminant in fixing this painful iphone hating problem.... and failed. You probably have the problem when you use youtube or your music external speaker that there is no volume bar and no sound.   I have had the same problem But I need to happily say that I now have the fix!!!! This worked for me and I fixed it by myself so you don't need to go to apple or service centre or anything.
Ok I like so many of you here truly believed this was as IO5 issue as it only dropped the sound on the speakers once that IO5 update came along. I tried a bunch of reset, reboots, home clicks, lock and unlocks, to fix this and all failed. some worked for an hour but then failed. hours of my life that I will never get back.   but since I have learnt this is not a IO5 problem but a hardware issue! ... and in paticualar is has to do with your bottom connection. Your phone is thinking it is docked all the time.
To fix the no sound problem what you need is...
1. a torch
2. a tooth brush
3. methalated spirits
4. a butter knife
Step 1.
get your torch and shine it down the bottom connection plate to see what kind of dust, sand, hair or anything you have stuck in there.   all that need to be removed! everything! it might look clean but still thats ok go to step 2.
step 2.
Turn on your music app and put the speakers on! If your phone is like mine it should not work. you most probably don't even have the volume display to turn it on but its ok, just do it! and it should still play with no sound.   its important you try and run the speakers as this will show you that it is a hardware problem.
step 3.
Dip your tooth brush into some methated sprits.   then at your sink tap the exess metho out of your brush as you just want the brushes to be slightly damp, not soaking wet and then scrub the bottom connetiors on your iphone. work the brush back and forward in a way that scoops the dirt out of the phone, not just pushing it side to side.
(As you bushing you should notice the volume bar come back on or off as you scub.   This happened to me and that is how I realised I was on the right track to fixing this problem as I was doing something external that was actually controling when the volume display came on or off.   but once I cleaned it this still didn't fix the problem...)
Step 4.
Use the back side of a butter knife (not the sharp side) to gently slide over the connectors on the iphone. Do this gently as you are only pushing down on the tiny metal contect bars and you should notice the volume display come on again. slide it back and forward. Now the area of interest is about 2/3 along the connection plate to the right.   This is the area that has the infomation sent when your iphone thinks its docked.
This has worked for me and I have not had a problem since I did this 2 weeks ago.   I have since learnt that the new IOS 5 has activated a different part of the bottom conectors. if you have been using dodgy connectors or unapproved apple cables (as I was) any damage or hair and dirt on the terminal this is effecting it. Try it.   just remember if you can do something external to your phone then there lies the problem.
Hope this works for your phone as it did for mine.
Cheers

Having a MBPr late 2013 and having a sound problem the sound does not come tom the headphones even its all the way up and when i remove the headphones it docent come out the internal speaker either ? any idea how i fix this?

the sound do not come out the headphones sometimes altho its all the way up in the setting and when i remove the headphones the sound doesnt come from the internal speaker either and only a reboot fixes the problem and thats annoying! any idea how tto fix this?

Hello. I've been able to play sound without problems through headphones or external speakers to date - the output always switched to these automatically until today. Now, sound output continues through internal speakers even if I plug in headphones or external speakers.
- I tested the headphones and speakers on other devices: they work fine.
- When I plug in headphones or speakers into the audio output port (I have verified that I'm not using the input jack) the devices are not detected and are not listed under the output tab in system preferences-sound.
I concluded from this that I probably had a problem with the audio port, so to test that I tried the following. I plugged a powered multi-USB device with ports for microphone line-in and headphone line-out into the USB port and switched it on. I verified that it was working by plugging a USB stick into the multi-USB device - this was recognised successfully, so the device was clearly working. I then plugged in headphones and speakers into the audio line-out on the multi USB device - but still no sound came through them (and tey were not listed among output devices) and the Mac continued using internal speakers.
What should I do? Does the latter test suggest that the problem does not lie with the audio port, or is my test not conclusive? What would you advise?
Many thanks indeed!
NG

Audio Problem: Skype audio comes through external ...

I recently upgraded my computer to Mac OS X Yosemite 10.10.3 and Skype to Version 7.8.
I used to use Skype with my Logitech H800 headset with no problems. However after the upgrade, the speaker audio is now forced through the external speakers instead of the headset. When I make a call, I hear the connecting sound effects through my headset, but when the call connects, the person's voice is coming through my external speakers.
Here is what my settings look like (see below). As you can see, the Skype settings are configured correctly.
I also tested my OS X Sound settings in the System Preferences. They are set to "Line Out" by default because I want to hear my music through my speakers, but want to take phone calls on my headset. Changing the system settings to the Logitech Wireless Headset is a temporary fix, however it is an extra manual step that has to be repeated with each phone call and when the call ends, I have to switch it back to Line Out. This used to be automatic feature, switching to the headset for an incoming or outgoing call.
Any suggestions on how to fix this issue and get Skype to automatically put calls through my headset? I worked with a Skype technician and she couldn't figure out why it was happening.
Thanks in advance for your input.
Solved!
Go to Solution.

Never mind. Shortly after posting this issue, I discovered an article which describes the problem as a bug with the latest release. See here for the article:
http://www.macobserver.com/tmo/article/skype-for-mac-update-ignores-its-own-audio-settings

I use Keynote on iPad2. Video out via composite AV cable, audio out through earphone socket. If I plug into the earphone socket first, then the AV cable - no sound. AV first, then earphone - sound. Anyone know why?

I use Keynote on iPad2. Video out via composite AV cable, audio out through earphone socket. If I plug into the earphone socket first, then plug in the AV cable - no sound. AV first, then earphone - sound. Anyone know why?

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Cannot hear any sound through my external speakers - help!

I'm running 10.6.4 on my imac 27". Can hear sound though the internal speakers, but even when I plug externals in and restart I can't see any option in the sound system preferences to let me hear through the external speakers. It's odd. Can anyone help?

More information will help.
Is this a problem that just started for you, or have you never been able to plug in headphones or external speakers and have them work?
Are you sure you are plugging into the correct jack on the computer? On my slightly older iMac I sometimes reach around to the back and hit the wrong jack.
When I open "Sound" in System Preferences and hit the "Output" tab, I see "Internal Speakers" listed. Then when I plug in my headphones the "Internal Speakers" automatically changes to "Headphones."
Is this what you see on your computer?
Good luck.
Arch

Please Read this ! USB Sound Blaster 24-Bit External : The Story of the endless problem

In order to keep the good behavior here (I`m really pissed off !) I just?want to tell you something (this is ESPECIALLY for all the guys from the stuff)?Before 2 days I`ve decided to buy a new sound system for my room. I bought myself Creative Inspire t600 5. surround system. Cool. I was very happy. I?needed only to buy a sound card?working with 5. because I have a notebook DELL INSPIRON 50 who has only 2 canals. So in order to be everything beautiful I gave $70 for Usb sound blaster 24-Bit external. And from that time the problems began. In short :? I was using Vista but I found out that it wont work with this soundcard. The first problem : Didn`t identify the device. I tried with several drivers... Nope. No sound card with Vista.(This problem seems to appearance with many owners like me)?I pluged the usb soundcard in my old pc running XP and it worked . PERFECTLY. So I removed Vista from my notebook and intalled XP. This took me whole day to rebuild all my software. Finally it left to set up the sound drivers. The cherry of the icecream. Aaaaand ..... **bleep**. When I play?any track it CRACKLES. Again problem appearanced with many here. I tried to find out here what is the problem but unfortunately as u can see my english is quite bad?so I cant understand?what I need.I really like Creative but if they cant manage this problem I will?no longer buy their stuffs??JUST PLEASE SOMEBODY ANSWER ME IS THERE ANY SOLUTION FOR THIS OR NOT. I JUST WANT STRAIGHT ANSWERPS : Please do not delete my post. I know there are plenty like this. I dont want this crackles

well ?

ITouch 2G playing sound through both external speakers and earphones

iTouch 2G playing sound through both external speakers and earphones when earphones are plugged in..
M using the latest version of itunes and iOS 4.2.1
....Have already tried formatting, resetting and even formatting when my earphones were plugged in...
Please help immediately..M out of warranty..

Have you tried another pair of earphones? It may be that the headphone jack is failing. You can, if you are competent, replace it yourself or get it fixed by a third-part place. See the following:
http://www.iresq.com/
http://www.ifixit.com/
http://www.irepair.com/ipod-touch-headphone-jack.html

QT breaking up and sound out of sync - cpu or ram or browser problem?

1. I try to watch BBC news video clips but can never get anything other than the sound out of sync, the picture breaking up and what I can only try to describe as a 'delayed streaming problem' where the film jumps frames from one frame to 'much later'.
2. Also the BBC has options of 'screen size' - I can't go to their large size so am stuck with a small version. (I don't think this is associated with the core problem.)
I play these clips either through Media Player or Real Player but it makes no difference.
I have flip4mac installed. I have the ATI display drivers updated.
I hope you understand the problem.
I hope I'll understand the answers!
Thanks for any helps.
Gordon

Another thing I've just noticed is that when the news clips are downloading and playing it is only at 36kbps. I have as far as I can set preferences at 256kbps.
I am connected to DSL but I'm not sure at what rate the ISP delivers. (I know it's the cheapest!)
Hope this helps anyone inclined to help.
Thanks
Gordon
ps After the World Cup Final is ok!

Problem feeding sound out through an external AV proces

Similar Messages

Maybe you are looking for