Problem for export

I have a problem. When I want to export the document, there is always this message: Can not open the file,, untitled - 1.epub,, adobe indesign May not support the file format and plug-in that supports the file format May be missing, or the File May Be open in another application.
Before I did not have this problem and when I exported some document, it was opened in Adobe Digital Editions. I do not really know whether I have done something wrong or what is the problem. Could You please give me an advise how to reset it or how can I repair it?
I have CS5.5 7.5.2 Windows.
Many thanks for help!

I don't do ePub, so I'm not really qualified to troubleshoot most epub problems, but if this just started to happen, I think there's a chance it might be fixed by repalcing your prefs. See Replace Your Preferences

Similar Messages

Help me identify problem for slow export on a powerful machine

Hi,
I am exporting an interview in Premiere Pro CC. It is 1:45:00 long and it has been 20 hours since, but the export is only 94% complete.
Project & Footage:
The footage is a combination of DSLR footage - 5D Mark III, GH3, 650 & 550D.
The edit is all straight cuts with: {a} Color corrector on each clip to match all cameras {b} NEAT - reduce noise on around 10% clips {c} Sharpen (10-30) & {d} An adjustment layer overall with a 3-way color corrector for a simple color grade.
Hard Drives:
E: SSD-RAID for the source footage (Samsung 840 SSD on RAID-0)
D: SSD for previews and cache (Samsung 840 Pro)
C: SSD for Windows, Adobe CC & all programs (Samsung 840 Pro)
G: Simple Seagate Hard disk for Export (used to be a 3 disk RAID but 2 drives crashed some time back)
Other Machine Spec:
Intel i7-3930K overclocked by 10%
64GB RAM
GTX-770 GPU
This is my longest project to date in terms of total time, but last time I did a 1:00:00 project, took around 2 hours not 20.
My concern is I need to understand where the bottleneck is?
My CPU is hardly working a sweat - 40% at max
My RAM is plenty - being used 40-70%
GPU is not even being used in anything (see it at 0%)
Disks (which I was sure was the bottleneck) barely cross 10MB/s
Checked the "power options" in Windows also - everything is set to maximum performance.
It was a big mistake not to send it to Media Encoder as I could have continued editing a different project. Biggest. Mistake. Ever! (no idea why Adobe does not make it a default behaviour?)
I am fairly new to the industry and till last year was using a MacBook Pro until I started getting demanding projects.
I want to know is this normal? If I had used NEAT video for 100% footage then probebly I could have understood this, but its used for only 1/10th of thr footage and I have used NEAT before (but on After Effects CS6) on my Macbook pro (nowehere near as fast as my current machine) and it only added a small overhead - nothing of this sort.
I expected maybe 3 hours to export this 90-100 min seqeunce, not over 1 day.
So what could be the reason? Why isn't one of the above (CPU, RAM, Disk, GPU) at 100%?
I expected 1 of these to be the bottleneck but nothing is crossing 50% even when it should be on full blast.
I dread what if there is small tweak required in the edit once its complete. This video is due on Monday, I would have to reencode for 24 hours.
Please experts - let me know your thoughts. Could it be that Creative Cloud Windows is slower than CS6 Mac & its not a hardware problem?
I am sure I am missing some hardware that is causing this bottlenck. Attaching resource Monitor screenshot (let me know if I should use some benchmark software for you guys to get more information).

UPDATE: My export crashed (and heart sank) after 96% (25 hours). Win7 restarted. I have no clue why (If someone has any tip how to seach logs/dump in Windows to find a reason how, please let me know - I was worried about CPU temperature but that was around 40 deg, I was monitoring it.)
Anyways, so I used Media Encoder now (instead of direct export in PrPro) and made 2 changes:
1. I unchecked "Render Maximum Depth" just as it is in the the default Youtube 1080p@24p preset (but kept the keyframing distance at 24 instead of 72 which is default).
2. From VBR - 2 Pass, I made it CBR
Its been 15 min I started the export and the video is 20% encoded already, with remaning time just 00:30 min.
Now I am flabergasted.
Did not using maximum depth & VBR- 2 pass alone make such a difference? From 30 hours to 1 hour? I am still using all the video effects and absolutely no change to the edit.
I am seeing 2 differences the way my machine is working:
1. Is Adobe somehow using some old renders it did for the last export? I am using disk utility and it is refering to original source files and some "Media Encoder preview files" which I think it was not using before (could be wrong)?
So all that hard work it did for 25 hours is being utilized and if I do such a project again it will take me 30 hours again. Right?
2. GPU is now being used (and to good effect). How is GPU being used now? I am not scaling or using any fancy effects. Just Neat Video, 3-way color corrector & Sharpen.
This was before (export done in Premiere Pro directly):
And this is now:
Very sad that no one (even from the Adobe Staff) has replied to my post. Did I say something inappropriate or TMI?
C'mon guys I am on the Creative Cloud - show me some love

Problem with Exporter for MS Access 3.2 in SQL Developer

Hi,
I have problem with exporting tables and data from MS Access to XML with Exporter for MS Access 2000.
This error ocurr: 'Error #5 - XML Exporter'
When I use Exporter for MS Access 2002 this error ocurr: 'Error #3478 - XML Exporter'
Any leads how to solve this problem ?

Thread moved to Forum Home » Database » SQL Developer
SQL Developer
Please, stay tune there.
Nicolas.

Problem facing for Exporting a Group above report to excel

Hello all any one can tell me How to set columns and rows of a Group above to report to export to excel.
I have a group above report but when i export it to excel the Columns and rows are out of order.Tell me what type of sequence should apply on columns and rows?????????

Adeel Aslam wrote:
No Dear I mean I have called the Procedure of Exporting report to Excel On Each Field On Format Trigger.But whan i run it and Export it Then columns and Rows are out of Order on Excel sheet.I only want to know standard sequence that i should apply in smart trigger that the fields are shown in excel same like on report.
RegardsI'm guessing you're not referring to SQL and PL/SQL then.
Oracle doesn't have a built in procedure for exporting to Excel, so how the data is being ordered is going to depend on the code in that procedure and whoever wrote it. If you need more assistance you need to give us more details of what it's doing.

Problem in J1iin for Export Invoices only

Dear All,
I want to create Excise Invoice for Export. We are using Letter of Undertaking ( LUT ) for our export. My Billing Document shows the values for BED, Cess & SHE Cess.
While J1iin , It also shows the BED, Cess & SHE Cess values in there appropriate places. As soon as I save the document excise invoice number got generated but when I see the same document through Change or Display mode, in all the places of BED, Cess & SHE Cess I got 0.00.
I checked J_1iexchdr & j_1iexchdtl tables all excise values are 0.00 there.
(Excise Invoice with BED, Cess & SHE Cess is our client's requirement)
Experts please give me your suggestions.
Regards
Sagar Pande

Dear Sagar Pande
In normal circumstances, if your configurations are in line with standard, it should not happen. Anyway, please check in J1I7 with transaction type DLFC whether those values (BED, SCess) are flowing. Not sure whether I am giving right direction but just you can try.
thanks
G. Lakshmipathi

Profoma invoice for Export sales from EOU plant rounding problem

Hello,
While creating profoma invoice for Export sales from EOU plant according to standard Tax procedure TAXINJ excise duties appears as JMOD , JECS, JA1X. But due to legal implication we have to bifurcate them in following
BCD
CVD
ECS on CVD
SEcess on CVD
ECS on total duty
SECess on total duty
Additional CVD
Now because of rates get rounding of total does not match with bifurcated duties. The duties should match as per below
JMOD = BCD + CVD + Additional CVD
JECS = ECS on CVD + ECS on total duty
JA1X = SEcess on CVD + SECess on total duty
Regards,
Nimit

You can achieve this with standard functionality, but you will have to make some configuration change:
- Create the new movement type
- Create the new MM account assignment
- Create a new schedule line category
- Create a new item category
- Create the assignment of the new schedule line category to the / a (new) item category.
Maybe you have to create a new item category group to ensure that the proper item category in the sales order is being determined.
Around user exits in MM in account determination: I'm not aware of any (good) ones, but you might want to take a look at the Business Transaction Events (transction FIBF). These are also a kind of user exit and might provide the functionality you are looking for.
If you can't accomplish the requirement through an enhancement (user exit, BAPI, BADI, BTE) you might want to consider using an intermediate G/L account during the Post Goods Issue. And then during the release to accounting doing an accrual to the "correct" G/L account, since in the (standard) Revenue Account Determination you can use all kinds of criteria.
Regards,
Jan Pel

Having problems when exporting .swf file as an animated gif

Hi:
I was wondering if anyone has ever had any issues exporting a
flash file as an animated gif? When I do so, the image quality is
very compromised and the animation is distorted. I know this is not
very specific question, but I have never encountered this issue
before, and I am trying to help a co-worker. I don't understand why
it looks exactly the way we want it to look as an swf file, but not
as an animated gif? Can anyone point me in the right direction as
to what to look for as the potential source of this problem? I have
the swf file, although this would not be very helpful as I don't
have access to the flash file (but I can send it to you if that
would help). We tried unchecking the feature to optimize the image,
and changed the color pallete to adaptive, but this didn't solve
the problem. I also tried removing any unnecessary layers prior to
the export. Basically, I'm not sure as to how to proceed and what
may be causing the problem. I also want to mention there is a
placed image on the stage. Could the type of image placed be
causing the problem when exporting to a gif file, but not as a
.swf? If anyone could help, I would really appreciate it! Thanks.
Sara

I also wanted to mention that the swf file uses sound. I am
reading an old book that I have on Flash and it's saying that Flash
and Shockwave Flash enter a special mode when they encounter a
stream sound in which the animation is forced to keep up with the
sound track, if the animation frames can not be drawn quickly
enough, some frames are skipped. I am also reading that the
animated gif format does not support sound. Again, the only
reference I have is for a very old version of flash, and I'm not
sure it applies to CS3. I am now just thinking that the sound may
be the issue.

0000000003/2007 excise invoice is not meant for exports.

WHEN IAM CREAING ARE 1 IA M GETTING THIS ERROR
0000000003/2007 excise invoice is not meant for exports.
Message no. 4F242

Hi murali,
Do you got any solution to your problem
if you got kindly inform me
cheers
bvdv

"Excise Invoice is not meant for Exports".

Dear All,
I am facing a problem while creating ARE1 for Export Sales.
At the time of creation (Tcode - J1IA101), when i am giving the outgoing excise invoice number, in the given field, system is saying that "Excise Invoice is not meant for Exports".
Whereas I have maintained seperate Series Group for Domestic as well as Exports.I have checked No.ranges as well, where I have found that, the Outgoing Excise invoice number is also maintained in the Number range Objects for Exports.
Can anybody suggest how to resolve the issue.
Rgds,
Indrajit

1.Check the Series Group is Maintained for Domestic and Exports
2. Maintain the number range in T.Code SNUM - Object "J_1IEXCEXP"
3.Ensure that the excise invoice number you referred is created for an export billing document.
4.Then go to J1IIN, check on the utilisation screen whether invoice type has been changed from Local to the respective export excise invoice.
5. Maintain the Bond with T.code J1IBN01 respective Plant and the Value with from to date
6. Cretae the ARE 1 through T.code J11A101 check the Excise Invoice No and the Amount
7. Check the Excise duty(BED) , E cess and Hr Edu Cess value is apperaing if not you have apply the Snote .
thanks
MJP Michael Joseph

Accounting document for Export Excise invoice

Dear All,
We have two scenario's one is Domestic Sales & Export Sale.
In domestic sales as per the normal flow of document we create excise invoice after billing document and accounting documents are also generated and updated in the billing document accounting (VF02). Accounting document for excise invoice has been generated.
However in export sales we create excise invoice with the reference of billing document but no accounting document has been generated for excise invoice.
Can u please tell me where i have to make changes so my accounting document for export excise invoice will generate?
Thanks & Regards,
Ratish

Hi ALL,
There are 4 export scenario :
1) Deemed export 2) Export under Bond 3) Export under claim for rebate [No bond] 4) Export under Letter of Undertaking.
3) In export under no bond process is :- we pay the excise on the goods for exports and create the ARE-1 doc and send to port where the customers officials note the actual quantity of goods on the ARE-1 doc and stamped it. Then these stamped ARE-1 will be send to the excise range of the despatch plant(for exports) where we claim the rebate.
Now if you are not able to generate the accounting doc for such a scenario some of the consultants may suggest u to use the user exit (J_1I7_USEREXIT_DUTY_IN_EXPORT) and pass the the value X to the parameter SUPPRESS_CALCULATION this intern will help u to generate the Accounting doc also. but real problem lies somewhere else.
Actual Solution: Maintain J1ID (Customer excise details)
for export customer maintained the excise indicator to 3 {Nil Duty} insted of 1 {100% tax}.
Problem will be solved
Regards
Satish Zade

Problem in export excise invoice under bond

Dear Gurus,
I am creating excise invoice for export under bond, in T-code J1iin, in utilization tab when i change to export invoice then it became mandatory for deemed export while i set it for under bond by following path
maintained in IMG Path -- Logistics-General --> Tax on Goods Movements --> India --> Business Transactions --> Outgoing Excise Invoice --> Maintain Default Excise Group and Series Group.
For that series group,excise group,sales area, plant,shipping point, I maintained Export under bond
But still problem is there.
Please give me solution
Thanks & Regards

Hello Rajesh,
While creating excise invoice for export excise invoice if duty values are getting nullified after selecting
utilization TAB, excise invoice type BOND, then kindly use the user exit J_1I7_USEREXIT_DUTY_IN_EXPORT
here pass the suppress calculation = X. So duty values will get copied from the billing document. If it is left
blank system will recalculate duty while creating excise invoice.
Best Regards
MBS

Problem while exporting the data from a report to an excel file.

Hi SAP guru's,
I have a problem while exporting the data from a report to an excel file.
The problem is that after exporting, the excel file seems to have some irrelevant characters....I am checking this using SOST transaction..
Required text (Russian):
Операции по счету
№ документа     Тип документа     № учетной записи     Дата документа     Валюта     Сумма, вкл. НДС     Срок оплаты     Описание документа
Current Text :
   ? 5 @ 0 F 8 8 ? > A G 5 B C
!   4 > : C       "" 8 ? 4 > : C      !   C G 5 B = > 9 7 0 ? 8 A 8        0 B 0 4 > : C         0 ; N B 0      ! C <       ! @ > : > ? ; 0 B K        ? 8 A 0 = 8 5 4 > : C
Can you help me making configuration settings if any?
Regards,
Avinash Raju

Hi Avinash
To download such characteres you need to adjust code page to be used during export. You can review SAP note 73606 to identify which code page is required for this language
Best regards

Problem in Exporting a Report Group having a Report Painter Report.

I am having a problem in exporting a Report group having a Report Painter report.When I am trying to export the Report Group using transaction GR57 with all dependent objects,it is displaying:
       group 0102CPDNUEA-CCROSI not transported.
       Transport groups separately if necessary.
There are 6 such groups which are not transported.Can anybody help me in this regards.Can anybody help me in exporting these Groups.Specifically in Report painter reports what do these Groups signify and how can we see them.Please help me....

hi,
I am able to export my report groups with dependent objects successfully.
I dont know why you are getting error message. Just keep break point at ***** and execute it for single group and find out why it is giving error.
IF SY-BATCH = 'X' OR NO_LIST = 'X'. "direct or batch
    SET PF-STATUS 'LIST'.
*****PERFORM TRANSPORT_OBJS USING 'X'. "transport all jobs
    IF FILE_EXP <> 'X'.
      READ TABLE WT_E071 INDEX 1.
      IF SY-SUBRC = 0.
        LEAVE.
      ENDIF.
    ENDIF.
ELSE.                                "online
    SET PF-STATUS 'MENU'.
   PERFORM WRITE_TRANSP_OBJS.
ENDIF.
regards,
ram

Problem in exporting ALV Report to excel sheet

Hi All,
I have developed a Report and now facing problem in exporting the same to excel sheet.
When we click the "Locate File" icon in the report layout, the system will pop up a window with radio buttons. I have opted for 'Spreadsheet'.
When i save the excel sheet into my desktop, the excel file has all the report headers (Title of each column). But no value is exported.
There are around 15 columns in the report and the excel sheet shows value of last 2 columns which has some text.
I have been into ALV report development and developed around 30+ reports in the same fashion.
What might be the reason behind this issue?
When i export other reports into excel sheet, everything is perfect without any flaws......
Kindly help me out......
Regards
Pavan

Hi,
Here's my suggestion: Install OpenOffice.org and ask SAP to deliver good integration with OpenOffice.org.
Alternative suggestion: re-install SAP Gui on the PC where the integration is not working. If that does not help, re-install Microsoft Office as well.
Here's my comment: I think you should ask this question in a different forum, e.g. in the Duet forum. That may not be the correct forum either, but as it is a Microsoft/SAP integration technology forum, someone there may know the solution.
Regards,
Raj.

Problem with exporting a report to excel vial citrix server

Hi,
We are encountering a problem with exporting a report to excel through ALV local file icon.A spread sheet is downloading only one row (From header) instead of many rows from the ALV output .
Above is working fine for the GUI installed on my PC, but not throgh the Citrix server.
Can any body have idea on above mentined?
Regards,
SK.

I understand that you're trying to download the file to a local computer through Citrix. In this case you need autorizations in Citrix for your user ( CItrix user)

Problem for export

Similar Messages

Maybe you are looking for