Problem for import dmp file

Hi,
I had installed both oracle 8i and 11g, I'm trying to import my dmp file in oracle 8i, but that query will shift to 11g environment.
How can i import my dmp file in 8i.
eg:
host imp sys/sys@ora file='D:\Ven_Excercise\hlw_demo\koow.dmp' ignore=y
fromuser=trainee
regards
venki

Already some references had been provided in ur previous post itself. Refer the
link been provided there.
Ur Orginal post:
problem of import file
Regards
Nirmal

Similar Messages

Problems with importing .dmp file (CLOB)

dear all
i am using oracle 10g XE
I am facing a problem with importing dmp ( one of my table contains clob coloum)
below mentioned is the error it gives while importing, please guide me as to how to handle this.
Thanks in advance
regards
Uday
"CREATE TABLE "RTEXT" ("SRNO" NUMBER, "TEXTDET" CLOB) PCTFREE 10 PCTUSED 40"
" INITRANS 1 MAXTRANS 255 STORAGE(INITIAL 65536 FREELISTS 1 FREELIST GROUPS "
"1 BUFFER_POOL DEFAULT) TABLESPACE "APEX_1244730274482010" LOGGING NOCOMPRES"
"S LOB ("TEXTDET") STORE AS (TABLESPACE "APEX_1244730274482010" ENABLE STOR"
"AGE IN ROW CHUNK 8192 PCTVERSION 10 NOCACHE LOGGING STORAGE(INITIAL 65536 "
"FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT))"
IMP-00003: ORACLE error 959 encountered
ORA-00959: tablespace 'APEX_1244730274482010' does not exist

You have to use SELECT tablespace_name, status FROM dba_tablespaces; from sql prompt or sql developer.
Ash
As Jonathan Lewis mentions:
A general reminder about "Forum Etiquette / Reward Points": http://forums.oracle.com/forums/ann.jspa?annID=718
If you never mark your questions as answered people will eventually decide that it's not worth trying to answer you because they will never know whether or not their answer has been of any use, or whether you even bothered to read it.
It is also important to mark answers that you thought helpful - again it lets other people know that you appreciate their help, but it also acts as a pointer for other people when they are researching the same question, moreover it means that when you mark a bad or wrong answer as helpful someone may be prompted to tell you (and the rest of the forum) what's so bad or wrong about the answer you found helpful.

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

When I try to import files from iMac HDD into the event, it fails. FCPX dosn't see this files for import. Files are *.m2ts and *.mpg. Should I buy plagin Quicktime component MPEG-2 to resolve a problem?

When I try to import files from iMac HDD into the event, it fails. FCPX dosn't see this files for import. Files are *.m2ts and *.mpg. Should I buy plagin Quicktime component MPEG-2 to resolve a problem?

no you should transcode those files into an format that os suitable for editing. Like proRez. Although you might need some Flip4Mac or perian or something to do the conversion.
adam

Import dmp file from a 64-bit to 32-bit database

I encountered the problem for import data from one database installed on a 64-bit HP-UX 11.0 with 8i database 64-bit database to another which was installed on HP-UX 10.2. 32-bit machine with Oracle 7.3.4 database.
The two databases were installed with default NLS.
Is there a way to handle this problem ?

Since you haven't provided an error message it is hard to tell what the problem might be? But from the scenario you are describing you may be importing a higher version of the export dmp file than the target database. This is not allowed. One thing you can try is to do the 8i database export using the EXP utility from 7.3.4, and then try importing into 7.3.4 .
null

Tempo problems with imported wav files

Hey everyone, sorry if there's a quick fix for this in the forums that I couldn't find, but I've been having some tempo problems with imported .wav files.
Long story short, my system couldn't handle playing all the tracks for a song while recording drums, so I bounced out an mp3 of the song and put it in a new Logic file so my drummer could just play along to that as I recorded him. Unfortunately, the original song is at 167 bpm, but I forgot to change the bpm in the new Logic file with the .mp3 file of the song to 167 bpm, so it was left at the default 120 bpm.
So, the drums were recorded at the correct 167 bpm, but Logic thinks that those new drum .wav files should be played at 120 bpm, so when I import my drum tracks back into the original file, they do not play correctly at all.
I could get record it all again, but I wanted to check if there was a way I could salvage what I already have, since my drummer lives about an hour away right now and can't just come over whenever he wants.
Thanks for the help! I really appreciate it.

Hi,
First, do not use MP3 in Logic, the sound quality is less than AIFF, WAV or CAF, and Logic has to decode it for playback, making it a heavier burden on the CPU than an uncoded audiofile, such as AIFF, WAV or CAF.
Secondly, audio files are independent of Logic's tempo. If you bounce down an audio file in any format (other than Apple Loop), it will play back at the same speed, +regardless of Logics' tempo setting+, either at recording or playback. Logic doesn't 'think' anything. The BPM is only important to MIDI tracks, or to the spacing between audio files. The audio files themselves *are not affected* by the tempo setting. If you import an audio file of tempo 167 into a 120 BPM project, the file will still play at 167, only Logic will indicate the wrong bar positions.
regards, Erik.

Problem to import MOV files

Hi,
I have a problem to import mov files from my hard disk (coming from a Casio Exelim ZR100 @ 1920x1080, 30 pic/sec. 44kHz, codec: H.264/AVC ). I tried different project setups - doesn`t work . I get a common failure message. MTS file import works...
System Win 8
Premiere Elements last version, all updates done
Error Message:
nase30

Media import
A Google Translate of your error message says that you are experiencing a generic importer error; consequently, not an editing nor exporting issue.
If you are using the Casio ZR 100, the video involved would be characterized as
1920 x 1080 @ 30 frames per second (progressive)
Video compression = AVCHD (MPEG4 AVC/H.264)
Audio compression = IMA-ADPCM (stereo)
File Extension = .mov
On the Premiere Elements side you have Premiere Elements 11 on Windows 8 (assumed 64 bit).
I have downloaded one of these files from your camera brand/model from an online source.
Windows 7 64 bit Premiere Elements 11. No importing or other problem with video or audio components of the file.
Windows 8 64 bit Premiere Elements 11. No importing or other problem with video or audio components of the file.
Based on my findings, I have no evidence to make a generalization that there is a problem with this Casio video and Premiere Elements 11 on Windows 7 64 bit or Windows 8 64 bit.
So that leads us to look for other factors. Top of the list is the version of QuickTime that you have installed on your computer. (As John T. Smith has already asked and is awaiting a reply on that. If you have the latest version of QuickTime installed, then I would uninstall it and then reinstall it.
What type of problem are you report
"it worked before but not now"
or
"it never worked before"
What might be interesting to look at. If you rename just the file extension of your Casio AVCHD.mov from .mov to .mts, .m2t, or .m2ts can you then import the problem file?
We will be watching for your results.
Thank you.
ATR

Reg import dmp file.

hi friends
what is the command to import DMP file in Oracle 10g database.
how to import this file in particular schema..
pls. help..

Prior to import you must have below requirement,
1. Directory created on DB where you have your dump file, you must have priviledge on this directory.
2. dump file on above mentioned directory.
3 use imp if you have export your dump with exp command , use impdp if have exported your dmp file using impdp.
4. Also you must have correct priviledge on exp,expdp utilities.
try to run 'impdp help=y' on your putty, it will open help for impdp.
hope it will help you in some extend.
Edited by: imkhan on Oct 22, 2012 4:32 PM

Help to import .dmp file to APEX

Hi All,
I have a question about export and import .dmp file to APEX.
I'm working on a data mining application based on database 11g. I managed to export the data mining model to a .dmp file using oracle data miner (ODM). now I wanna to know how to import this dmp file to the online schema (for example the free apex hosting). I used DBMS_DATA_MINING.EXPORT_MODEL and DBMS_DATA_MINING.IMPORT_MODEL and it's work in my computer.
thanks

Hello <unknown user>,
In short : you can't import a dmp file into apex.oracle.com.
That's because you need the imp utility (and the corresponding roles/rights).
You can create sql scripts for the DML and DDL and upload and run those.
Greetings,
Roel
http://roelhartman.blogspot.com/

Can not Import *.dmp file in 10g Database

I have successful to install 10gDB and 10gDS to my home computer. But when i try to import *.dmp file to my Repository Object Navigator.
Would you mind help me to take a look.
Error Message
RME-02105 Oracle error occurred...
ORA-01986: OPTIMIZER_GOAL is obsolete
Cause: An unhandled oracle error has occurred.
Action: Examine reported errors for specific detail.

Ken,
This issue has been reported with Designer releases prior to 9.0.4.4 against 10g database. Please upgrade to the latest Designer release 9.0.4.5 (available on OTN) and the import should work correctly.
- Suresh

Import DMP file into Oracle 8.1.5 on Windows 2000

How to import DMP file into Oracle 8.1.5 database on Windows 2000 ?
Please mention a coding example
Thanks,
Vivek Gupta

Import has a lot of options, so it depends on what you want to do.
C:\> imp help=y
will show you all possible options. An example of full import :
C:\> imp <username>/<password>@<TNS alias> file=<DMP file> full=y log=<LOG file>
Message was edited by:
Paul M.
...and there is always [url http://download-uk.oracle.com/docs/cd/F49540_01/DOC/index.htm]The documentation

Problems in importing avi file

I have problems\ in importing avi file..
when i try to import an avi file,, it is written that there is a message "unsupported format or damaged file"..
What should I do then?
I use Windows Vista Ultimate..

Welcome to the forum. As Harm points out, AVI is but a wrapper, and can contain all sorts of data inside. This ARTICLE might give you some insight into working with AVI's.
Good luck,
Hunt

Premiere Pro CS5: please help problem with importing a file error output "there was an error decompressing audio or video"

please help problem with importing a file error output "there was an error decompressing audio or video"

this is related to what adobe program/version?

How to import *.dmp file Through Oracle SQL Developer (3.2.20.09)

hi
how to import *.dmp file Through Oracle SQL Developer (3.2.20.09) ?
how to do it ?
thanks

You do not.
.dmp files are created from our Export and Data Pump database utilities and are proprietary files. You use the corresponding Import (or Data Pump) utility to import the data.

How to ceate Transport Request Number for importing transport files

I'm trying to create Transport Request Number for importing transport files.
I've copied the two transport files (K903281.QB8 and R903281.QB8) into subdirectories usr/sap/trans/cofiles and usr/sap/trans/data, respectively. Now, I want to import the transport files using transaction management system (STMS). Before using STMS, it seems like I need to create Transport Request Number, but I don't know how to create it. Could you please let me know how to create it?

Sanjeev and Sajay,
Thanks for your answer. I was able to import the files successfully as transport number QB8K903281 by using standard STMS transport function after manually adding new transport on STMS. My trouble was from my ingrorance of how to let STMS recognize transoprt number for transport files copied from outside SAP. Again thank you very much.
Tetsuya

Problem for import dmp file

Similar Messages

Maybe you are looking for