Problem for linking IMAQ 2D FFT
Hello,
I would like to use IMAQ 2D-FFT VI's to make High-pass filtering, but just can't get the conversion VI ("FFT") working.
It always gives me the same message:
"IMAQ FFT source and destinations must be different"
If somebody has just a small source to show me how to make an image file High(or Low) pass filtering using IMAQ features, it would help me to understand how to plug it...
Thanks in advance for help.
(I join a file which shows typically what I do not understand: how to plug the VI FFT)
Jean-Philippe
Attachments:
Lect1.vi 57 KB
Hello Jean-Philippe,
To use this FFT function the Image Dst needs to be a complex image and the Image Source for the FFT-1 needs to be a complex image as well. I have attached a VI that uses this FFT function which should shed some light on the issue. Hope this helps. Have a good one.
-Dan-
Attachments:
Interactive_FFT_Filter_Example.llb 98 KB
Similar Messages
-
Problem with links for external user
Hi,
We´re using SAP NetWeaver Portal 2004s SPS 10 and we have a problem with links within notification-mails:
The link to the document (e.g. within a subscription mail) consists of "http:///...". Only user using the portal within our network can open this links. All external user can´t open this links. How can I change the URL so that our external user can open the links, too?
Thanks for help,
Sven KellerWe already have another URL for external usage. My problem is how to define that created links to documents and folder are automatically using the external URL.
If somebody receives an email (e.g. subscription) the URL to the folder is:
http://<portalserver>:51000/irj/go/km/navigation/documents/Public Documents/Documentation
But it should be:
https://<externalportal>/irj/go/km/navigation/documents/Public Documents/Documentation
Message was edited by:
Sven Keller -
I am receiving unauthorised billings for purchase from application Kingdom Age from seller Funzio, Inc . I can't find a place/link to cancel the billing neither report this problem. The link REPORT A PROBLEM only links you to Apple Store without a hint/directions whre you can report the problem.
I've been surfing all parts of the website and didn.t find a manner to REPORT A PROBLEM with purchases on my behalf not authorized.Hi..
Just to be on the safe side if you have not already changed your Apple ID password, probably should do that.
How to change your Apple ID password
And you can use the email form for contacting Apple here > Apple - Support - iTunes Store - Contact Us -
hi
i'd like to ask question about linked server.
my linked server used to work but now when i try to select from linked server i was told "The OLE DB provider for linked server reported an error. The provider reported an unexpected catastrophic failure Cannot fetch a row from OLE DB provider
for linked server"
but in fact for test connection i was told "the test connection to the linked server succeeded".
could anyone help me? thank u very much
best regards
martinHi,
In addition to Tracy's post we have to know those answers as well:
* what provider are you using for the connection
* what do you connect to
for example, if someone try to connect to oracle using sql server provider then several simple queries are going to work probably OK, but once you are trying to use T-SQL or any complex SQL query then the errors are starting.
please post the connection string (without the password!) + the query that you are trying to use.
[Personal Site] [Blog] [Facebook] -
Sharepoint 2013 - Search for link names on a single page
Hi
I am messing around with SP13 and trying to get my search result web part to only search for link names and display all results.
I have created the search source to point at the sub site. If I search for part of a link name it will list all links in one long row as a single result.
Example: One single page contains all links. Each link points to a .aspx page. The search source is pointing at this page and it can display results but only as a single result containing all links as one line of text.
Say I have 1000+ links of which 50 has names such as Link1-Item1-Basket1, Link1-Item1-Basket2 up to Link1-Item1-Basket50.
When I search for Link1-Item1 I would like my search results to display 50 results as 50 individual links.
Is this possible?Hi,
Yes, you can format the search results as you expected. But you have to create a custom display template to format your results such as extract the links from each results and display it as separate link.
Once display template created you have to map the display template to your search results web part.
Please refer to the following articles.
SharePoint 2013 Customize Display Template for Content By Search Web
Part (CSWP) Part-1
Introduction to SharePoint 2013 Display Templates
Display Template Overview
Please mark it answered, if your problem resolved. -
I can use my appleID without any problems for using to download new apps in the app-store or Itunes - Problem: I can´t use my ID at facetime and Imessage -
I´d like to add an EMail account on top to my mobile number to use more this services. My password will not be accepted!!!??? I try it and i try it and i try ist, throughout the same problem. Whats on? The user help desk said, i´ve to reset and use the WLAN key new as well as possible - no way!Contact the App store for Apple ID help. Their support link is on the right of the App store window
LN -
"not a valid location for linked resource" in Flash Builder 4.7
Hi,
I'm constantly running into the problem, that Flash Builder simply won't let one create a linked resource that points to a location on the same drive?
I'm getting the infamous
"...not a valid location for linked resource..."
error message.
I'm using FB 4.7 with Flash Professional CC.
Is that supposed to work at all?
I've 1 workspace where I've successfully created a linked resouce - but it fails for all others. Even when I'm setting up a new WS.
And it's totally unclear to me why it had worked there but not in all others that I'm trying to create.
AndréA year later, but I'm facing the same bug.
If your ever found a solution I'd be glad to hear.
I filed a bug with more details and my own workaround:
3697022 -
Our setup is that we have two databases; a SQL Server 2008 database and an Oracle database (11g). I've got the oracle MTS stuff installed and the Oracle MTS Recovery Service is running. I have DTC configured to allow distributed transactions. All access to the Oracle tables takes place via views in the SQL Server database that go against Oracle tables in the linked server.
(With regard to DTC config: Checked-> Network DTC Access, Allow Remote Clients, Allow Inbound, Allow Outbound, Mutual Authentication (tried all 3 options), Enable XA Transactions and Enable SNA LU 6.2 Transactions. DTC logs in as NT AUTHORITY\NetworkService)
Our app is an ASP.NET MVC 4.0 app that calls into a number of WCF services to perform database work. Currently the web app and the WCF service share the same app pool (not sure if it's relevant, but just in case...)
Some of our services are transactional, others are not.
Each WCF service that is transactional has the following attribute on its interface:
[ServiceContract(SessionMode=SessionMode.Required)]
and the following attribute on the method signatures in the interface:
[TransactionFlow(TransactionFlowOption.Allowed)]
and the following attribute on every method implementations:
[OperationBehavior(TransactionScopeRequired = true, TransactionAutoComplete = true)]
In my data access layer, all the transactional methods are set up as follows:
using (IDbConnection conn = DbTools.GetConnection(_configStr, _connStr))
using (IDbCommand cmd = DbTools.GetCommand(conn, "SET XACT_ABORT ON"))
cmd.ExecuteNonQuery();
using (IDbCommand cmd = DbTools.GetCommand(conn, sql))
... Perform actual database work ...
Services that are transactional call transactional DAL code. The idea was to keep the stuff that needs to be transactional (a few cases) separate from the stuff that doesn't need to be transactional (~95% of the cases).
There ought not be cases where transactional and non-transactional WCF methods are called from within a transaction (though I haven't verified this and this may be the cause of my problems. I'm not sure, which is part of why I'm asking here.)
As I mentioned before, in most cases, this all works fine.
Periodically, and I cannot identify what initiates it, I start getting errors. And once they start, pretty much everything starts failing for a while. Eventually things start working again. Not sure why... This is all in a test environment with a single user.
Sometimes the error is:
Unable to start a nested transaction for OLE DB provider "OraOLEDB.Oracle" for linked server "ORACLSERVERNAME". A nested transaction was required because the XACT_ABORT option was set to OFF.
This message, I'm guessing is happening when I have non-transactional stuff within transactions, as I'm not setting XACT_ABORT in the non-transactional code (that's totally doable, if that will fix my issue).
Most often, however, the error is this:
System.Data.SqlClient.SqlException (0x80131904): The operation could not be performed because OLE DB provider "OraOLEDB.Oracle" for linked server "ORACLSERVERNAME" was unable to begin a distributed transaction.
Now, originally we only had transactions on SQL Server tables and that all worked fine. It wasn't until we added transaction support for some of the Oracle tables that things started failing. I know the Oracle transactions work. And as I said, most of the time, everything is just hunky dorey and then sometimes it starts failing and keeps failing for a while until it decides to stop failing and then it all works again.
I noticed that our transactions didn't seem to have a DistributedIdentifier set, so I added the EnsureDistributed() method from this blog post: http://www.make-awesome.com/2010/04/forcibly-creating-a-distributed-net-transaction/
Instead of a hardcoded Guid (which seemed to cause a lot of problems), I have it generating a new Guid for each transaction and that seems to work, but it has not fixed my problem. I'm wondering if the lack of a DistribuedIdentifier is indicative of some other underlying problem. I've never dealt with an environment quite like this before, so I'm not sure what is "normal".
I've also noticed that the DistributedIdentifier doesn't get passed to WCF. From the client, I have a DistributedIdentifier and a LocalIdentifier in Transaction.Current.TransactionInformation. In the WCF server, however there is only a LocalIdentifier set and it is a different Guid from the client side (which makes sense, but I would have expected the DistributedIdentifier to go across).
So I changed the wait the code above works and instead, on the WCF side, I call a method that calls Transaction.Current.EnlistDurable() with the DummyEnlistmentNotification class from the link above (though with a unique Guid for each transaction instead of the hardcoded guid in the link). I now havea DistributedIdentifier on the server-side, but it still doesn't fix the problem.
It appears that when I'm in the midst of transactions failing, even after I shut down IIS, I'm unable to get the DTC service to shutdown and restart. If I go into Component Services and change the security settings, for example, and hit Apply or OK, after a bit of a wait I get a dialgo that says, "Failed ot restart the MS DTC serivce. Please examine the eventlog for further details."
In the eventlog I get a series of events:
1 (from MSDTC): "The MS DTC service is stopping"
2 (From MSSQL$SQLEXPRESS): "The connection has been lost with Microsoft Distributed Transaction Coordinator (MS DTC). Recovery of any in-doubt distributed transactions
involving Microsoft Distributed Transaction Coordinator (MS DTC) will begin once the connection is re-established. This is an informational
message only. No user action is required."
-- Folowed by these 3 identical messages
3 (from MSDTC Client 2): 'MSDTC encountered an error (HR=0x80000171) while attempting to establish a secure connection with system GCOVA38.'
4 (from MSDTC Client 2): 'MSDTC encountered an error (HR=0x80000171) while attempting to establish a secure connection with system GCOVA38.'
5 (from MSDTC Client 2): 'MSDTC encountered an error (HR=0x80000171) while attempting to establish a secure connection with system GCOVA38.'
6 (From MSDTC 2): MSDTC started with the following settings: Security Configuration (OFF = 0 and ON = 1):
Allow Remote Administrator = 0,
Network Clients = 1,
Trasaction Manager Communication:
Allow Inbound Transactions = 1,
Allow Outbound Transactions = 1,
Transaction Internet Protocol (TIP) = 0,
Enable XA Transactions = 1,
Enable SNA LU 6.2 Transactions = 1,
MSDTC Communications Security = Mutual Authentication Required, Account = NT AUTHORITY\NetworkService,
Firewall Exclusion Detected = 0
Transaction Bridge Installed = 0
Filtering Duplicate Events = 1
This makes me wonder if there's something maybe holding a transaction open somewhere?The statement executed from the sql server. (Installed version sql server 2008 64 bit standard edition SP1 and oracle 11g 64 bit client), DTS enabled
Below is the actual sql statement issued
SET XACT_ABORT ON
BEGIN TRAN
insert into XXX..EUINTGR.UPLOAD_LWP ([ALTID]
,[GRANT_FROM],[GRANT_TO],[NO_OF_DAYS],[LEAVENAME],[LEAVEREASON],[FROMHALFTAG]
,[TOHALFTAG] ,[UNIT_USER],[UPLOAD_REF_NO],[STATUS],[LOGINID],[AVAILTYPE],[LV_REV_ENTRY])
values('IS2755','2010-06-01',
'2010-06-01','.5', 'LWOP' ,'PERSONAL' ,'F', 'F', 'EUINTGR',
'20101',1,1,0,'ENTRY')
rollback TRAN
OLE DB provider "ORAOLEDB.ORACLE" for linked server "XXX" returned message "New transaction cannot enlist in the specified transaction coordinator. ".
Msg 7391, Level 16, State 2, Line 3
The operation could not be performed because OLE DB provider "ORAOLEDB.ORACLE" for linked server "XXX" was unable to begin a distributed transaction.
Able to execute the above statement successfully without using transaction.We need to run the statement with transaction. -
Lenovo ideapad yoga 13 pci data acqusition and signal processing center for problem for windows 8
Link to picture
hi everyone,
find original w8 cd and then i installed, when i was installing
i deleted all recovery and other partition, i did not think what can i do,
but then i activated windows and installed all driver, but i taking
after all drivers it stayed
2''unknown devices''
and when i rebooted, it says, usb device not recognized'' and also
''pci data acquisition and signal processing center'' devices problem for windows 8. and touchscreen not working.
i read related for w7 same problem, but what i will do now ?
thanks.
Moderator note; picture(s) totalling >50K converted to link(s) Forum Ruleshi adilsefaersan,
Welcome to Lenovo Community Forums!
By opening your Device Manager right click on one unknown device and choose properties,
>On the properties windows Click on the Details Tab, on the property drop down Choose hadware IDs
> then copy the value and post back here whats on the Value pane
Do it for all those unknown Device and Post here the Value of the hardware ids
also can you share your Windows Version and bit type so we'll knwo the correct download page for you
Thanks and Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Modify service endpoint in webservices.xml throws class not found for link
Hello, we had a problem for serveral days and have not found any solutions googling. We read the documentation and seems ok, so we are a little desesperate.
We have a WebService project in Oracle Eclipse included in Weblogic 10.3.5 with the following classes:
- An EJB (org.test.TestWSImpl) with the @WebService annotation:
@WebService(serviceName = "TestService", portName = "testService", targetNamespace = "testNameSpace",
endpointInterface = "test.TestWS", wsdlLocation = "/wsdls/test.wsdl")
- When deploying the ear all runs ok. Now, for serveral business reasons, we need to change the defalut service URI so we added a webservices.xml and weblogic-webservices.xml.
The webservices.xml:
<?xml version='1.0' encoding='UTF-8'?>
<webservices xmlns="http://java.sun.com/xml/ns/javaee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" version="1.2">
<webservice-description>
<webservice-description-name>TestService</webservice-description-name>
<port-component>
<port-component-name>testService</port-component-name>
<wsdl-port xmlns:tns="testNameSpace">tns:testDataService</wsdl-port>
<service-endpoint-interface>test.TestWS</service-endpoint-interface>
<service-impl-bean>
<ejb-link>TestWSImpl</ejb-link>
</service-impl-bean>
</port-component>
</webservice-description>
</webservices>
In the weblogic-webservices.xml we define the new endpoint:
<?xml version='1.0' encoding='UTF-8'?>
<weblogic-webservices
xmlns="http://xmlns.oracle.com/weblogic/weblogic-webservices"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://xmlns.oracle.com/weblogic/weblogic-webservices http://xmlns.oracle.com/weblogic/weblogic-webservices/1.1/weblogic-webservices.xsd">
<webservice-description>
<webservice-description-name>IE3SEnvironmentalMasterDataService</webservice-description-name>
<webservice-type>JAXWS</webservice-type>
<port-component>
<port-component-name>e3sEnvironmentalMasterDataService</port-component-name>
<service-endpoint-address>
<webservice-contextpath>/E3S</webservice-contextpath>
<webservice-serviceuri>/e3sEnvironmentalMasterDataService</webservice-serviceuri>
</service-endpoint-address>
</port-component>
</webservice-description>
We apreciate any help
Thanks in advance!
Edited by: 960518 on 21/09/2012 02:42
Sorry for the copy; a browser error. Please delete this threadWe have found a solution removing the eclipse webservice project and adding the EJB inside the EJB project module.
greetings. -
Indesign CS6 on MACs with OS 10.8 are having problems with links
Hi
Indesign CS6 on MACs with 10.8 are having problems with links. All links to other files have to be updated when opening a file although definitely nothing has changed to the linked files.
We can rule out our company's networking and the system hosting the files (HELIOS software on RedHat Linux VM). This happens with newly created Indesign files and with old ones. E.g. we create a file on Tuesday, save it and open it again on the exact same MAC on Wednesday and all links to other fiels (.indd, .png, .bmp, etc. nothing uncommon) have to be updated as they all show the yellow triangle + black exclamation mark symbol next to them. Has anybody else experienced this, What can we do? We have tried absolutley everything and updated all software from MAC OS to CS6 itself but nothing seems to help on the long run.
Any further information required?
M. MillerThanks for your quick reply.
We actually noticed that there also seems to be something wrong with the timestamps:
If we open the infos via the MAC finder to a file (.psd e.g.) which is linked in one of our indesign files, it states a certain date of creation.
If we then switch to the Indesign file we just opened in which we had to update all links and open the infos to exactly the same file we looked at in the finder, a different date of creation is stated. So there also seems to be a mistake here (hope it's clear what I mean).
We are ruling out our network as the error cannot be "re-enacted". We have created numerous test files in Indesign (simple white page containing one link to a .psd file which is also used in one of the supposedly defective files) and have opened them on various MACs with various OS versions over the past days/weeks but unfortunately the files open without any notifications or errors.
Just as a background: a few months ago, the problem seemed to occur between MACs with differing OS, 10.6 - 10.8 at first. A file which was created on a 10.6 MAC could not be opened without updating all links on a 10.8 MAC. That is why we updated everything to 10.8. The error did not occur for about 2-3 weeks but then reoccured again.?
Have you heard anything similar? -
Problem with normalized frequency on fft
Greetings
I have a problem when working with vi fft Spectral measurements, when acquiring an analog signal , the frequency of this switch to a digital frequency affected by the sampling rate, and hence the frequency axis ( of a waveform graph) gives incorrect, how can I multiply the digital frequency by the sampling frequency to obtain the original analog frequency?
how can I save as a text file in 2 columns (frequency and magnitude in db)? I tried to write with 'WRITE measurement FILE' but shows a header file and the columns are time and value, there is another way to store this data?
thanksgreetings and thanks for answering
attached the vi I'm using, the questions are 2
1. How can I multiply the frequency of the signal by the sample rate to get the right analog frequency for example (if the sample rate is 1000 for a frequency of 60 Hz , i got 0.06 Hz observed on the waveform graph)
2. How can I get a flat file without a statement at the top with 2 columns frequency and magnitude db
thanks
Im using labview 7.1
Attachments:
channel.vi 211 KB -
Outlook Password prompt for Linked Mailboxes from certain Domain
Hello,
As part of a migration project, I'm trying to connect Outlook with Linked Mailboxes from users in a trusted domain.
I'm able to create the linked mailbox on the Exchange 2013 (CU7) server without any issue, but when I try to configure Outlook for these mailboxes, it is prompting for credentials permanently and won't start. Log on to OWA with the same user from the trusted
domain is working fine.
I'm able to configure Linked mailboxes from another trusted domain without any problems.
I've already recreated the trust between these two domains (validation tells everything is ok)
DNS is configured with conditional forwarders in both domains and name resolution looks ok to me (ping and nslookup)
When I look at the LinkedMasterAccount of the mailboxes from this domain, I can see that there is only the SID (S-1-5-21-4033829......). The other linked mailboxes (from the other domain where it's working) are showing the Account name (domain\user)
Internal and External ClientAuthenticationMethod of OutlookAnywhere is set to NTLM
Infos:
DomainA: Domainlevel 2012 - Exchange 2013 - Forest trust to Domain B and C
DomainB: Domainlevel 2008 - Exchange 2010 - Forest trust to Domain A - Outlook for linked Mailboxes of DomainA works fine
DomainC: Domainlevel 2008 - Forest trust to Domain A --> can't connect Outlook to LinkedMailboxes of this domain.
Is there anything else I can check?Hi,
Please check whether the server is configured to only accept NTLM version 2 and reject NTLM and LM, and the Outlook client computer is not configured with the same LAN Mananger authentication level.
Check DC, Start -> Programs -> Administrative Tools -> Security Options -> Note the LAN Manager authentication level.
Check DC's policies, Start -> Programs -> Administrative Tools -> expand Security Settings\Local Policies -> Security Options -> Note the Lan Manager authentication level.
IMPORTANT: You may also have to check policies that are linked at the site/domain/organizational unit levels to determine where the LAN Manager authentication level must be configured. Configure the LAN Manager authentication level to "Send
NTLMv2 response only". If you want to implement NTLM version 2 in your network, make sure that all computers in the domain are set to use this authentication level.
Thanks
Mavis Huang
TechNet Community Support -
Hi
in the saw.sessionsinfo.xml file ,i change the home link prop true to false
but it not remove from the presentation side
below is my file
Below is my script file
plz check it
give if any errors
<?xml version="1.0" encoding="UTF-8"?>
<resourceBundle xmlns="oracle.bi.ps.resourceBundle/v1">
<gdexpression id="noLogoffUI" expr="session.hideLogoffLink" />
<gdexpression id="syndicate" expr="session.syndicate" />
<gdexpression id="canAccessDashboards" expr="privileges.Access['Global Portal']" />
<gdexpression id="hdrLinkCatalog" expr="true" />
<gdexpression id="hdrLinkOpen" expr="true" />
<gdexpression id="hdrLinkAdvanced" expr="true" />
<gdexpression id="hdrLinkHelp" expr="true" />
<gdexpression id="hdrLinkHome" expr="false" />
<gdexpression id="hdrLinkGSearch" expr="true" />
<gdexpression id="hdrLinkNew" expr="true" />
<gdexpression id="hdrLinkDashboards" expr="true" />
<gdexpression id="hdrLinkSettings" expr="true" />
<gdexpression id="bipKeepAlive" expr="session.bipKeepAlive" />
<gdexpression id="bipWebUrl" expr="system.config['AdvancedReporting/WebURL']" />
<gdexpression id="bipExternalRepository" expr="system.config['AdvancedReporting/ExternalRepository']" />
<gdexpression id="biComposerContext" expr="system.config['BIComposer/ContextPath']" />
</resourceBundle>
plz anybody give solution for this
Edited by: ARYABRAHMA on Feb 5, 2013 3:38 AMis cache problem for this
-
Hello All,
As mentioned in title, i am stuck up with that articular error from last three days,
i have following scenario, my SQL server 2008, my oracle 10g are on both same machine with OS Windows Server 2008.
the following error generated on my management studio when i execute my procedure written in my SQL server. Following is original source code snippet after error massage.
OLE DB provider "OraOLEDB.Oracle" for linked server "ORCL" returned message "New transaction cannot enlist in the specified transaction coordinator. ".
Msg 50000, Level 16, State 2, Procedure PROC_MIGRATE_MST_FRM_ORA_SQLSERVER, Line 43
The operation could not be performed because OLE DB provider "OraOLEDB.Oracle" for linked server "ORCL" was unable to begin a distributed transaction.
BEGIN TRY
-- MIGRATION OF PR_COMPANY_MH START
BEGIN TRANSACTION T1
PRINT 'mILAN NNNNNNNNN 11'
INSERT INTO PROD.PR_COMPANY_MH
SELECT * FROM OPENQUERY(ORCL, 'SELECT * FROM PR_COMPANY_MH WHERE SQL_FLG = ''N'' ')
PRINT 'mILAN NNNNNNNNN 12'
UPDATE OPENQUERY(ORCL, 'SELECT SQL_FLG FROM PR_COMPANY_MH WHERE SQL_FLG = ''N''')
SET SQL_FLG = 'Y'
--EXECUTE ('UPDATE PROD.PR_COMPANY_MH SET SQL_FLG = ''Y'' ') AT [ORCL]
PRINT 'mILAN NNNNNNNNN 13'
COMMIT TRANSACTION T1
-- MIGRATION OF PR_COMPANY_MH END
END TRY
BEGIN CATCH
PRINT 'mILAN NNNNNNNNN 14'
ROLLBACK TRANSACTION T1
PRINT 'mILAN NNNNNNNNN 15'
SELECT
@ErrorNumber = ERROR_NUMBER(),
@ErrorSeverity = ERROR_SEVERITY(),
@ErrorState = ERROR_STATE(),
@ErrorLine = ERROR_LINE(),
@ErrorProcedure = ISNULL(ERROR_PROCEDURE(), '-');
PRINT 'mILAN NNNNNNNNN 16'
SELECT @ErrorMessage = ERROR_MESSAGE();
RAISERROR (@ErrorMessage, @ErrorSeverity, @ErrorState, @ErrorNumber, @ErrorProcedure)
PRINT 'mILAN NNNNNNNNN 17'
END CATCH
this perticular part is raising that error, and i had tried every configuartion on my local machine related to MS DTC.
When i remove my transaction code, its work just fine no exception raise, but when i use then i.e. BEGIN TRAN, COMMITE TRAN, AND ROLLBACK TRAN. its giving me error, other wise its fine.
Please Help or disscus or suggest why my transaction base code is not woking????
thanks in advance.
Regards,
MilanSorry again, I am new on any kind of forum, so i am learning now, following is the error massage generated by SQL Server. and its not
an architecture problem, i had just included my complete architecture to be more informative while asking for the solution or suggestion. My real problem is T-SQL, i think and its related to Distributed queries raise in SQL Server in Oracle Link Server.
OLE DB provider "OraOLEDB.Oracle"
for linked server "ORCL" returned message "New transaction cannot enlist in the specified transaction coordinator. ".
Msg 50000, Level 16, State 2, Procedure PROC_MIGRATE_MST_FRM_ORA_SQLSERVER,
Line 43
The operation could not be performed because OLE
DB provider "OraOLEDB.Oracle" for linked server "ORCL" was unable to begin a distributed transaction.
Maybe you are looking for
-
Wireless CCTV - need to open a port
Hi All; I have a wireless monitoring system (CCTV) for my home that can be accessed remotely though my IPhone or IPad when I am away. It works great while I am at home on my wireless network but I cannot get access when on a remote Wi-Fi. Apple Store
-
I am using Oracle AS 10.1.3.1 on windows. My FTP server is also on Windows. But during invoke of outbound FTP adapter i am getting following error I am able to do FTP from AS machine to FTP server (Window) through command prompt and it is working fin
-
Portal runtime error exception ID: error in init method
Hi Experts I am getting the portal runtime error http://<fqdn>:<port>/irj/portal, can anybody suggest me what to do. "Portal runtime error. An exception occurred while processing your request. Send the exception ID to your portal administrator. Exce
-
Is it possible to connect with Blackberry to use internet on my iPad??
Is it possible to connect with Blackberry to use internet on my iPad??
-
I was going to download a book off of Itunes and when I went to download it my zip code didn't match my card so I wasn't able to download it. now I have a pending charge on my account from Itunes for the book I never received, will I still be charged