Problem for Restoring after Updating to iOS5

I saw on the phone, it stated updated completed for iOS5 BUT on the iTunes still updating.. so i pluck out and see but the phone installed back ALL my unwanted apps again and therefore I plug in to iTunes again thinking that i can sync to my previous setting...  the sync process got hang and so I clicked on the restore button and NOW... all my SMS text messages and other bookmarks all gone... managed to sync back contacts...
Anyonne can help??

Just throwing in my 2¢, I'm having the same problem. For what it's worth, I noticed previously that even when the iPad said 'Not Charging' (while it was plugged in to my PC, for example) it WAS charging, albeit slowly. This was prior to OS5. Now I'm noticing it in places I wasn't seeing it before the recent OS update, like at virtually all of the charging 'stations' scattered around our house (we're a multi-I device family!)   Before the update, I could plug the iPad in and recharge it from about 20% or slightly less all the way to 100% in about 6 hours overnight. After the update, 5.5 hours took me from 14% to 54%.
Apple, your "solution" is only a different flavor of problem. You need to do better than this.

Similar Messages

  • Terrible problem - The restore after updating iPhone 4 to ios 7.1 isn't accepted

    Hello everybody!
    All my story begins when I switched the data between 2 phones - iphone 3GS and iphone 4. I've done a backup to each of the phones at itunes and then i've done a restore on the other one. The restores went well and the data has switched successfuly.
    After that I updated the iphone 4 to the ios 7.1, also with the itunes [and before that I did a backup again]. At the first settings after the update, i've been asked about my language etc, and then i've been asked if I want to define it as a new iphone / restore from icloud / restore from itunes - so i'v chosen the last option.
    Unfortunately, after the restore has ended i've just backed to the start point - the same first settings questions has been asked again as I didn't do the restore. Then I've tried to do the restore again and I finished with the same result.
    In the meantime I don't have a phone during the last 24 hours, and because my all work is with this phone - I find it as a very terrible problem for me!
    Please help to a desperate man like me!!
    Thank you very much,
    Idan.

    I'm happy to say that I solved the problem, and for the community (for the "next generation" that will search a solution for this problem) - I will publish the solution for this problem : I defined as new iphone, and then the restore showed up!
    All wishes everyone...

  • Problems with iMessage after update to iOS5

    I installed the iOS5 on my iTouch and now I can't use iMessage. It keeps prompting me for my AppleID username or password, which it won't accept, even though I used iMessage prior to the update to iOS5! I rebooted and created a new password (even purchased a song to make sure AppleID worked, it did) and NOTHING!! Help! Any suggestions would be appreciated!

    I found an answer thanks to
    Ryneeev
    Re: iMessage iMessage Waiting for activation Help 
    Mar 10, 2012 6:07 PM (in response to Mezoabo)
    Don't waste time with all of that crap....
    Just update your date/time settings:
    Settings
    > General
    >> Date & Time
    >>> Set Automatically:  Slide "ON"...If it's already on, then slide it off, chill for a bit (maybe restart it), then slide it back on.
    I literally* just did this, saw a link for this thread, and figured i'd come see if it worked for you.  Mine hasn't worked since early January and for a while I wasn't getting texts from some other iPhone users either.
    I have an iPhone 4, but I assume it will still work for you.  I also have iOS 5.1 (just updated after plugging into iTunes on my mac), so that may make a difference, but I think it's just a network thing.  When you disable "Set Automatically" for time, I figure that you are also denying access to a part of the network that is necessary for iMessage.
    **EDIT**
    I also forgot to mention that, despite Apple's excluvisity, you still need to rely on an internet connection to use this little feature.  After you activate, it will even have an option to send as a regular text (SMS) when iMessage isn't available (when there is no or very little internet).  I'm assuming that sliding to "no" will just save the message until you connect again.

  • Problems with contacts after update to ios5.

    I updated my phone to the ios5 and now it will not let me edit my contacts in anyway. i can not delete, change numbers, names or anything. What can I do to fix this?

    I found an answer thanks to
    Ryneeev
    Re: iMessage iMessage Waiting for activation Help 
    Mar 10, 2012 6:07 PM (in response to Mezoabo)
    Don't waste time with all of that crap....
    Just update your date/time settings:
    Settings
    > General
    >> Date & Time
    >>> Set Automatically:  Slide "ON"...If it's already on, then slide it off, chill for a bit (maybe restart it), then slide it back on.
    I literally* just did this, saw a link for this thread, and figured i'd come see if it worked for you.  Mine hasn't worked since early January and for a while I wasn't getting texts from some other iPhone users either.
    I have an iPhone 4, but I assume it will still work for you.  I also have iOS 5.1 (just updated after plugging into iTunes on my mac), so that may make a difference, but I think it's just a network thing.  When you disable "Set Automatically" for time, I figure that you are also denying access to a part of the network that is necessary for iMessage.
    **EDIT**
    I also forgot to mention that, despite Apple's excluvisity, you still need to rely on an internet connection to use this little feature.  After you activate, it will even have an option to send as a regular text (SMS) when iMessage isn't available (when there is no or very little internet).  I'm assuming that sliding to "no" will just save the message until you connect again.

  • HT201210 been trying to restore ipod touch for days after updating itunes. keep getting error #9. Tried it on 2 computers, with vista + XP. tried all the solutions posted. nothing is working. Thanks Apple. Didn't have this problem before updating itunes!

    Been trying to restore Ipod touch for days after updating Itunes. Error code #9. Stuck on restore screen. Tried all the solutions posted. Tried on 2 computers, Vista + XP. No device shown on computer. Thanks Apple! Didn't have this problem before update. How about rolling back your update?

    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

  • I can't sync my ipad2 after updating to ios5. Says 'waiting for changes to be made'. Any ideas?

    I can't sync my ipad2 after updating to ios5. Message is 'waiting for changes to be applied'. Any ideas?

    Have you tried doing a Restore?
    For some problems the solution is to download & reinstall iTunes.
     Cheers, Tom

  • Phone asked for voicemail password after update to iOS5. I pushed cancel bc I didn't know it. Now I now it but the screen just says set-up. How do I get the prompt to appear again?

    Phone asked for voicemail password after update to iOS5. I pushed cancel bc I didn't know it. Now I now it but the screen just says set-up. How do I get the prompt to appear again?

    usaspirit88 wrote:
    Phone asked for voicemail password after update to iOS5. I pushed cancel bc I didn't know it. Now I now it but the screen just says set-up. How do I get the prompt to appear again?
    Try typing in your 10 didget cell number. Restart iPhone to get the prompt again.

  • After Update to iOS5, i can't synchronise my films, showing me 'error 19', your iPad doesn't support this videoformate..any ideas to solve my Problem?

    After Update to iOS5, i can't synchronise my films, showing me 'error 19', your iPad doesn't support this videoformate..any ideas to solve my Problem?

    To delete, tap "Edit" (tap to enlarge image)

  • Problem with iphone after update

    Hey guys, I am having a bit of bother with my iphone. Basically i was given an iphone 3g and I'm not really sure where it came from but it had a vodafone sim, I am on an orange contract so i took out the vodafone sim and put the orange one in and to my surprise it worked,  it has been working fine for months but tonight I decided to do an update on itunes and now it is telling me that the "sim card in this phone does not appear to be supported" and and my phone is stuck on a screen with the usb cord and the itunes logo telling me to connect it, also i can only make emergency calls. What on earth have i done? I no longer have the original sim so cant use that to activate it
    Is there any way to fix this? I had no idea doing an update would cause this trouble and atm my phone is useless.
    Any help would be very much appreciated,
    Cheers
    Tors,

    The problem also appeared for some people after updating to 7.0, and for some after updating to 6.1.3, or 6.1.2, or to 5.1, 5.0, etc. and some first saw it without updating at all. Which argues against it being a software problem with 7.1 specifically.
    Restore your phone using iTunes and set it up as a new phone. It you still have the problem it is a hardware failure.

  • Cellphone-Roaming impossible with iPhone 4 after updating to iOS5.

    After updating to iOS5 I'm unable to connect my iPhone 4 to a cellphone-network when in foreign countries (roaming), I only get a network in my home-country Germany?
    When trying to select a cellphone-network manually, it shows me all the available networks, but as soon as I choose one it says: "the choosen network is no longer available. You may choose another network in Settings."
    This happens with all networks shown.
    Before updating to iOS5 roaming was possible without any problem as I have the option in my contract with T-Mobile Germany since the beginning. I checked with T-Mobile Support in Germany and was told that from their side there are no restrictions.
    How can I fix this problem (which is obviously a software-problem)??

    Call your carrier & have them remove International Provisioning from your account, once they've confirmed doing so, turn your phone off...wait 30 seconds or so, then turn your phone back on. Once done, have your carrier re-provision your account for International Roaming...all countries you intend to roam in...once your carrier has confirmed re-provisioning your account, turn your phone off again...wait 30 seconds or so, then turn your phone back on. Make sure, before you go through this that Set Time Zone Automatically is on in Settings.

  • Problem loading pages after update to Firefox 36

    After updating from Firefox 35.0.1 to version 36, I am unable to load any pages in Firefox. (My internet connection is fine and I can use other browsers on the same computer.)
    I've already tried many troubleshooting routines to fix the problem but none have worked. I've tried the instructions here:
    https://support.mozilla.org/en-US/kb/fix-problems-connecting-websites-after-updating
    (including troubleshooting my Firewall and proxy settings)
    and here:
    https://support.mozilla.org/en-US/kb/firefox-cant-load-websites-other-browsers-can
    I've also tried the more general and extensive troubleshooting here:
    https://support.mozilla.org/en-US/kb/troubleshoot-and-diagnose-firefox-problems
    NONE of the suggestions in any of those pages solved the problem. Opening Firefox is Safe Mode did not help either. I was unable to load pages even in Safe Mode.
    After following all of the steps in all of those troubleshooting guides and still failing, I uninstalled Firefox completely. (I followed all official directions on how to uninstall.) Then I re-installed Firefox VERSION 35.0.1. Firefox again worked fine with the older version.
    Then I restored my profile from a backup using MozBackup. (My most recent backup was done when I had Ver. 35.0.1 installed.) Everything was still fine; Firefox worked fine and all of my settings were back to my preferences.
    Finally, I again tried to update to version 36 - and the same thing happened! Unable to load any pages!
    One other thing I've noticed: With version 36 installed, there is something wrong with my Options dialog. The first time I upgraded, I had only blank tabs for "General" and "Advanced"; with my second try, after updating to V 36 my Options dialog has blank tabs for "General" and "Search" (although Advanced is now showing.)
    I am going to uninstall again, and again go back to V 35.0.1. But I would like to be able to update to the newest version. What can I do?
    (I am a long-time Firefox user, and reasonably computer savvy. I have many extensions installed as I use Firefox as an important tool in my job as a website designer. I have Firefox extensively fine-tuned to my liking to optimize my work-flow.)
    Any help appreciated!

    Your message seems to have covered all the normal things we check.
    When you tried using v36, did you have any add-ons? Have you tried;
    '''https://support.mozilla.org/en-US/kb/profile-manager-create-and-remove-firefox-profiles'''
    '''Windows: 32-bit''' C:\Program Files\Mozilla Firefox\firefox.exe -p
    '''64-bit''' C:\Program Files (x86)\Mozilla Firefox\firefox.exe -p
    '''Mac:''' Navigate to '''/Applications/Utilities.''' Open the Terminal application.
    In the Terminal application, enter the following:
    /Applications/Firefox.app/Contents/MacOS/firefox-bin -p
    '''Linux:''' In '''Terminal''' run: firefox –P
    For users who have one or more builds from mozilla.org this will not work.
    It would be best to have the full path so if you had placed the untared contents
    in a folder in /home it would be /home/<username>/foldername/firefox/firefox –P
    An easy way would be not to do it in a terminal but in say a launcher since
    you have to point it to the firefox script in Firefox folder you can then add –P
    on end. You can also have the exact "profilename" after the -P so Firefox
    will start with that Profile.

  • After updating to ios5 my phone no longer notifies me when i have recieved e mail, any one having this happen to them?

    After updating to ios5 my phone no longer indicates when i have unread e mails, is this happening to any one else?

    I am back with an update. I turned off Match on both the ipad and the iphone 5. By doing so I was able to sync my Iphone and ipad to itunes and store the music on my devices rather than the slow streaming.  So far this has fixed my problems with the iphone I have all my music, playlist, most of the album art and so on.  But the ipad is a different story.  I have the music and artist but not one playlist  I am sure Apple will have an upgrade soon that will address these issues they are usually very good about this. 
    Now have any of you experienced another problem that has existed as long as I have used faces in Aperture.
    I have over 200 faces and they are organized a-z problem is I have this going on A-Z folowed by a few that start over A-Z followed by another few A-Z and again a 4th time A-Z.  Imagine how difficult it is while I am showing someone the great features of my iphone, ipad and imac.  Which I do talk highly of all the time.  But how do I explain that even though their name starts with a or b or what ever they are not important enough to me to be in the first list of A-Z or even the 2nd or 3rd list of A-Z someohow they are in the 4th section of the list!!!!
    I have managed to get the Imac to fix this but for some reason the IOS devices do not.   Any ideas?
    Thanks Al

  • Apple remote will no longer connect to itunes on my pc after updating to ios5

    my apple remote will not connect to itunes on my pc after updating to ios5 anyone know why.

    Hi Chukwudinma!
    Here is an article that will help you troubleshoot this issue:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Have a error code 4013. iphone 4s wont restore after update.

    my iphone will not restore after update. it is stuck in recovery mode. i get error code 4013 everytime a try to restore but i cant find anything on error code 4013.

    DFU mode is also good as stated above, however the instructions for DFU mode are below (please note this is not the same as recovery mode) -
    Plug your device into your computer.
    Turn off the device.
    Hold the Home button and Power button for 10 seconds
    Release the Power Button but keep holding the Home button
    Keep holding the Home button until you are alerted by iTunes saying that it has detected a device in Recovery Mode
    Make sure the device screen is blank and no logos are present, device screen should remain black.
    Error 4013 is due to security software issues. Uninstall all security software completely, try again, if the issue persists I would either recommend another computer or calling AppleCare tech support at 1-800-APL-CARE (for US customers).
    Note- this is even if your device worked fine prior to iOS 7 update with your security software. The change in the operating system on the device can cause compatibility issues with these other programs.
    I hope this helps it worked for me!

  • HT1766 my iphone 4 is stuck in restore after updating the lasted version.  It was working fine before.How do I get it working again?

    my iphone 4 is stuck in restore after updating the lasted version.  It was working fine before.How do I get it working again?

    Hello, fschris. 
    Thank you for visiting Apple Support Communities.
    When experiencing issues updating or restoring an iPhone, here are the best articles to go through.  If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/ts1275
    Cheers,
    Jason H.

Maybe you are looking for

  • CFDocument and PDF Named Destinations

    In essence I am building a single merged document (PDF) combining a single HTML document and n number of names from a SQL database. My plan is to use CFDocument to create a complete page set for each individual in the database and tack it on to the e

  • Table : Production order status

    Hi all , i need the Table in which the Production order status will appear . i tried AFKO and AFRU but not finding the same . Pl tell me the field name if possible . Regards

  • Bursting JDE Report with Report Interconnect

    I have a JDE report that calls another JDE report to build a temporary table of pricing and then returns back to the original report to display the information. The report can be ran for multiple addresses and it breaks on address number in the heade

  • Boris filters not working

    Not all of my Boris filters are working in motion 3. They seem to be intermittent. This seems to be a new problem. I have had the system for about 1.5 years and I have not done any up grades. Any one with an idea???? Mike

  • Backup with brarchive/brbackup on local disk with RMAN

    Hello, i want to backup on a local disk with rman. Can i use the archive_function copy_delete_save? futhermore i have the following question: backup_dev_type= rman_disk  => What is an external backup tool? Best regards Lutz