Problem for the Transport of SXDA Project in SAP R/3 4.6 C

Hi Gurus
Our System one Client 012 is not opened for Making changes to Repository objects / Cross Client objects.
And the Client requirement is that he does not want to open this client.
We have come across a scenario , Where in we are trying to transport the SXDA projects.
But it throws us message 'Cross Client Changes / Repository Object Changes are not allowed to be transported'.
Although this projects are client dependent.
When we try to change any project in this client, then it allows us but it does not allow us to transport this.
Can any body help us in this regard ?
Thanks
Manish Naharia

For 6.10 and below you can't use the SMTP interface because it doesn't exist.  There was a technology called the Internet Mail Gateway that was used prior to 6.10.  Here is a blog that I wrote on the subject:
/people/thomas.jung3/blog/2004/09/07/sending-e-mail-from-abap--version-46d-and-lower--api-interface
Although it largely focuses on the coding aspects, I also have OSS Notes and screen shots for some of the config.  Look at notes 99965 and 101573.
On a side note - Karthik - what the hell are you posting.  Did you even read the question.  I've warned you before, as I know that Raja as in the BSP formum as well.
Input Field with multiple selection
Simply doing a search and cutting and pasting totally unrelated content doesn't do anyone any good.  It is actions like this that are driving people away from SDN.  Think hard about the impact you are having as well as how this reflects upon you personally and your employeer.

Similar Messages

  • 2 Paths for the transports

    Hi,
    Netweaver 7.00
    We have the folowing for the transports
    DEV - > QAL -> Pre-PROD -> Prod
    Pre-prod is not very used
    so the developpers want to use Pre-prod as quality for a new project
    like below:
    DEV -> Pre-prod -> QAL -> prod
    is it possible to have the 2 paths together ?
    Is it a good configuration ?
    Thanks for your help

    You can only setup one consolidation route, so you either have QA or pre-prod but not both..
    You could set pre-prod as a separate delivery route (you'll need to import the transport in QA first)
    Regards
    Juan

  • LabView "Guru" needed for the summer (4 month project) Kalamazoo, MI

    LabView "Guru" needed for the summer (4 month project)
    I am looking to hire a LabView "Guru" for a summer project in Kalamazoo, MI that will last 4 months.  Specifically, the ideal person will have the following:
    LabView expert with a minimum of 7-15 years of experience working with LabView (currently using version 6.1).
    80% of the job will be dissecting and interpreting mature LabView code and then re-engineering it to be used for testing.
    Printed Circuit Board experience a plus.
    4 year degree (BSEE preferred, but expertise in LabView takes priority over degree)
    The pay will be $60/hr and you can plan on overtime of at least 10 hrs each week that will be paid at $90/hr. 
    Please call 616-855-4600 if you need more information and email a "word" copy of your resume to [email protected]

    Sounds like Parker-Abex (LabVIEW 6.1 part)
    Putnam
    Certified LabVIEW Developer
    Senior Test Engineer
    Currently using LV 6.1-LabVIEW 2012, RT8.5
    LabVIEW Champion

  • Hello. I have an iPad2, and iMovie software. My main problem, for the moment, is the length of the videos: I can´t create a video with more than 56 seconds. When I try, the app shuts off... Can anyone help me?

    Hello. I have an iPad2, and iMovie software. My main problem, for the moment, is the length of the videos: I can´t create a video with more than 56 seconds. When I try, the app shuts off... Can anyone help me?

    Sorry. We can't help you. It's no longer an iPhone. Apple won't touch it.
    Take it to whoever replaced the screen and see if they can help you.
    iPhones are not user servicable and Apple does not sell iPhone parts at all. I'd be surprised if you were actually able to back it up at this point. It sounds like it's completely borked.

  • Messages waiting for the transport confirmation

    Hi,
    in message monitoring SXI_MONITOR process view, the message status with 'message being sent' and showing the clock sysmbol and waiting for the transport confirmation.
    could you please suggest on this.
    many thanks.
    regards,
    kaushal

    hi Manisha,
    this is the legacy 2 legacy system BPM is used for synchronous messages.
    thanks and regards,
    kaushal

  • Hello, I am holding a Iphone 4. I have serious problems for the update of the IOS software 5. in fact this new software will not install. after several attempts, I have error messages 1602, 1604, 2009 ... Suddenly, the screen of my phone is stuck with the

    ****, I am holding a Iphone 4. I have serious problems for the update of the IOS 5 which will not install. atfer several attemps, ihave error messages 1602, 1604, 2009.

    Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum.  Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is.  Apple is not here.  It's users, like you. 
    If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

  • If I use Explorer, none of these problems exist. This suddenly happened overnight! I have your newest upgrade and I haven't had any problems for the past year or so....this is weird.

    1. only in firefox - flashplayer won't upgrade, endless loop of "add plug-ins" etc.
    2. vertical scroll bar flipped from left side to right.
    3. crtl ++ to zoom doesn't function.
    4. can't load any "personas" when in Google gmail.
    If I use Explorer, none of these problems exist. This suddenly happened overnight! I have your newest upgrade and I haven't had any problems for the past year or so....this is weird.
    == This happened ==
    Every time Firefox opened
    == Monday 6/14

    Your above posted list of installed plugins doesn't show the Flash plugin for Firefox.
    See [[Managing the Flash plugin]] and [[Installing the Flash plugin]]

  • Problem with the transport request

    A request was released to Prod.
    In D and Q the request is success but in P it shows one error..
    so, we tried to create a new request and copy the objects from the old one.
    but v r gettiing the objects not below the task(in req) but below the req..
    so it is not possible for me to release it.
    I also tried to edit the code , but when i saved it it is not asking for a new request. is it bcoz old req is released to P?

    Hi,
    In production system, it is showing an error in the logs while transporting : Generation of Programs and Screen and return an error code 8. there are no repositary objects to transport. this is just simple code modification. In Quality and Dev system, transportation was done successfully with out causing any problem.
    So, we tried to create a new transport request by editing the code in development.however it is not asking for the new transport request number while saving or activating.
    Also, we tried to create a new TR manually using SE09 and placing the modified objects under the task. but, transport request and task number are getting created at a time and while assigning the objects, the objects are under the request not under the task.the objects should be under the task only.
    this is the problem what exactly we are getting. Please clarify..
    Thansk!!!

  • Does any one know about the small Hardrive that "The Power Company" is producing, sponsored by Indiegogo, for small Apple mobile devices (iPhones, iPods, etc,).  Do they work or cause problems for the device or iCloud storage?

    Does any one about the small hard drive that "the Power Company" is bringing out as a crowdsourced project by Indiegogo?  Does it work, does it cause problems for IOS, iPOD Touch or iCloud?

    I have not heard that mentioned here before. What does the Indiegogo page say?

  • Urgant problem for the updating problem  HELP

    Dear sir/miss,On 2008.12.01 one of our partner company consultant,setup an update(SAPKH50016 AND SAPKH50017) page on our production system without and test in the test system.
    Now our transaction code CV03N,CV02N,CV01N can not be used,jump out abap problems as below:
    It's already give us very big impact to our SAP system,so please tell me how to deal with it.
    "Runtime Errors MOVE_CAST_ERROR
    Exceptn CX_SY_MOVE_CAST_ERROR
    Date and Time 2008.12.02 08:23:43
    ShrtText
    A dynamic type conflict occurred during reference assignment.
    What happened?
    Error in ABAP application program.
    The current ABAP program "CL_EX_DOCUMENT_MAIN02=========CP" had to be
    terminated because one of the
    statements could not be executed.
    This is probably due to an error in the ABAP program.
    What can you do?
    Print out the error message (using the "Print" function)
    and make a note of the actions and input that caused the
    error.
    To resolve the problem, contact your SAP system administrator.
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer
    termination messages, especially those beyond their normal deletion
    date.
    is especially useful if you want to keep a particular message.
    Error analysis
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assigned to the class 'CX_SY_MOVE_CAST_ERROR', wa
    neither
    caught nor passed along using a RAISING clause, in the procedure
    "IF_EX_DOCUMENT_MAIN02~D100_BEFORE_PAI" "(METHOD)"
    Since the caller of the procedure could not have expected this exception
    to occur, the running program was terminated.
    The reason for the exception is:
    A 'CAST' operation ('?=' or 'MOVE ?TO') tried to assign an object or
    interface variable to a reference variable.
    However, the contents of the source variable do not fit in the target.
    Source type. "\CLASS=ZCL_IM_DOCUMENT_MAIN02"
    Target type: "\INTERFACE=IF_EX_DOCUMENT_MAIN02"
    How to correct the error
    If the error occurred in one of your own programs or in an SAP program
    that you modified, try to correct it yourself.
    You may able to find an interim solution to the problem
    in the SAP note system. If you have access to the note system yourself,
    use the following search criteria:
    "MOVE_CAST_ERROR" CX_SY_MOVE_CAST_ERRORC
    "CL_EX_DOCUMENT_MAIN02=========CP" or "CL_EX_DOCUMENT_MAIN02=========CM007"
    "IF_EX_DOCUMENT_MAIN02~D100_BEFORE_PAI"
    If you cannot solve the problem yourself and you wish to send
    an error message to SAP, include the following documents:
    1. A printout of the problem description (short dump)
    To obtain this, select in the current display "System->List->
    Save->Local File (unconverted)".
    2. A suitable printout of the system log
    To obtain this, call the system log through transaction SM21.
    Limit the time interval to 10 minutes before and 5 minutes
    after the short dump. In the display, then select the function
    "System->List->Save->Local File (unconverted)".
    3. If the programs are your own programs or modified SAP programs,
    supply the source code.
    To do this, select the Editor function "Further Utilities->
    Upload/Download->Download".
    4. Details regarding the conditions under which the error occurred
    or which actions and input led to the error.
    The exception must either be prevented, caught within the procedure
    "IF_EX_DOCUMENT_MAIN02~D100_BEFORE_PAI"
    "(METHOD)", or declared in the procedure's RAISING clause.
    To prevent the exception, note the following:
    System environment
    SAP Release.............. "640"
    Application server....... "ciserver"
    Network address.......... "172.31.120.37"
    Operating system......... "Linux"
    Release.................. "2.6.9-11.19AXsmp"
    Hardware type............ "x86_64"
    Character length......... 16 Bits
    Pointer length........... 64 Bits
    Work process number...... 3
    Short dump setting....... "full"
    Database server.......... "diserver"
    Database type............ "ORACLE"
    Database name............ "PRD"
    Database owner........... "SAPPRD"
    Character set............ "C"
    SAP kernel............... "640"
    Created on............... "May 22 2006 19:43:51"
    Created in............... "Linux GNU SLES-9 x86_64 cc3.3.3"
    Database version......... "OCI_920 "
    Patch level.............. "129"
    Patch text............... " "
    Supported environment....
    Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
    10.2.0.."
    SAP database version..... "640"
    Operating system......... "Linux 2.6"
    Memory usage.............
    Roll..................... 16192
    EM....................... 12569568
    Heap..................... 0
    Page..................... 57344
    MM Used.................. 2076240
    MM Free.................. 2111024
    SAP Release.............. "640"
    User and Transaction
    Client.............. 600
    User................ "MENGQC001"
    Language key........ "E"
    Transaction......... "CV03N "
    Program............. "CL_EX_DOCUMENT_MAIN02=========CP"
    Screen.............. "SAPLCV110 0100"
    Screen line......... 43
    Information on where terminated
    The termination occurred in the ABAP program "CL_EX_DOCUMENT_MAIN02=========CP"
    in "IF_EX_DOCUMENT_MAIN02~D100_BEFORE_PAI".
    The main program was "SAPLCV110 ".
    The termination occurred in line 134 of the source code of the (Include)
    program "CL_EX_DOCUMENT_MAIN02=========CM007"
    of the source code of program "CL_EX_DOCUMENT_MAIN02=========CM007" (when
    calling the editor 1340).
    Processing was terminated because the exception "CX_SY_MOVE_CAST_ERROR"
    occurred in the
    procedure "IF_EX_DOCUMENT_MAIN02~D100_BEFORE_PAI" "(METHOD)" but was not
    handled locally, not declared in the
    RAISING clause of the procedure.
    The procedure is in the program "CL_EX_DOCUMENT_MAIN02=========CP ". Its source
    code starts in line 1
    of the (Include) program "CL_EX_DOCUMENT_MAIN02=========CM007 ".
    ource Code Extract
    ine SourceCde
    104 CLEAR data_ref.
    105 GET REFERENCE OF OKCODE INTO data_ref.
    106 CALL METHOD <flt_cache_line>-eo_object->set_parameter(
    107 im_parmname = 'OKCODE'
    108 im_value = data_ref ).
    109
    110 CLEAR data_ref.
    111 GET REFERENCE OF DRAW INTO data_ref.
    112 CALL METHOD <flt_cache_line>-eo_object->set_parameter(
    113 im_parmname = 'DRAW'
    114 im_value = data_ref ).
    115
    116 CALL METHOD <flt_cache_line>-eo_object->evaluate
    117 IMPORTING
    118 ex_exception = exc
    119 EXCEPTIONS
    120 raise_exception = 1
    121 OTHERS = 2.
    122 IF sy-subrc = 2.
    123 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    124 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    125 ELSEIF sy-subrc = 1.
    126 CASE exc-exceptn_nm.
    127 WHEN 'CANCEL'.
    128 MESSAGE ID exc-msgid TYPE exc-msgty NUMBER exc-msgno
    129 WITH exc-msgv1 exc-msgv2 exc-msgv3 exc-msgv4
    130 RAISING CANCEL.
    131 ENDCASE.
    132 ENDIF.
    133 WHEN OTHERS.
    EXITINTF ?= <flt_cache_line>-OBJ.
    135 CALL METHOD EXITINTF->D100_BEFORE_PAI
    136 EXPORTING
    137 TCODE = TCODE
    138 CHANGING
    139 OKCODE = OKCODE
    140 DRAW = DRAW
    141 EXCEPTIONS
    142 CANCEL = 1.
    143 case sy-subrc.
    144 when 1.
    145 raise CANCEL.
    146 endcase.
    147 ENDCASE.
    148
    149 CALL FUNCTION 'PF_ASTAT_CLOSE'
    150 EXPORTING
    151 OPENKEY = 'S61ZFJapGHhX00002X5BGm'
    152 TYP = 'UE'.
    153 ENDLOOP.
    Contents of system fields
    Name Val.
    SY-SUBRC 0
    SY-INDEX 0
    SY-TABIX 14
    SY-DBCNT 14
    SY-FDPOS 1
    SY-LSIND 0
    SY-PAGNO 0
    SY-LINNO 1
    SY-COLNO 1
    SY-PFKEY D100DISPLAY
    SY-UCOMM BACK
    SY-TITLE Display Document: Initial Screen
    SY-MSGTY
    SY-MSGID
    SY-MSGNO 000
    SY-MSGV1
    SY-MSGV2
    SY-MSGV3
    SY-MSGV4
    Active Calls/Events
    No. Ty. Program Include Line
    Name
    3 METHOD CL_EX_DOCUMENT_MAIN02=========CP CL_EX_DOCUMENT_MAIN02=========CM007 134
    CL_EX_DOCUMENT_MAIN02=>IF_EX_DOCUMENT_MAIN02~D100_BEFORE_PAI
    2 FORM SAPLCV110 LCV110F19 124
    D100_CONSUME_EVENTS
    1 MODULE (PAI) SAPLCV110 LCV110I08 10
    D100_FCODE
    Chosen variables
    Name
    Val.
    No. 3 Ty. METHOD
    Name CL_EX_DOCUMENT_MAIN02=>IF_EX_DOCUMENT_MAIN02~D100_BEFORE_PAI
    TCODE
    CV03
    45332222222222222222
    36030000000000000000
    00000000000000000000
    00000000000000000000
    OKCODE
    BACK
    4444222222222222222222222222222222222222222222222222222222222222222222
    213B000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000
    DRAW
    2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    SY-MSGV1
    22222222222222222222222222222222222222222222222222
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    EXC-MSGV1
    22222222222222222222222222222222222222222222222222
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    SY-MSGV2
    22222222222222222222222222222222222222222222222222
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    EXC-MSGV2
    22222222222222222222222222222222222222222222222222
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    SY-MSGV3
    22222222222222222222222222222222222222222222222222
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    EXC-MSGV3
    22222222222222222222222222222222222222222222222222
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    SY-MSGV4
    22222222222222222222222222222222222222222222222222
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    EXC-MSGV4
    22222222222222222222222222222222222222222222222222
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    EXITINTF
    F0000000
    F0000000
    <FLT_CACHE_LINE>-OBJ
    E0001000
    E0001000
    SYST-REPID
    CL_EX_DOCUMENT_MAIN02=========CP
    4454554445444554444333333333334522222222
    3CF58F4F35D5E4FD19E02DDDDDDDDD3000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    SY-REPID
    CL_EX_DOCUMENT_MAIN02=========CP
    4454554445444554444333333333334522222222
    3CF58F4F35D5E4FD19E02DDDDDDDDD3000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    %_DUMMY$$
    2222
    0000
    0000
    0000
    SY-SUBRC
    0
    0000
    0000
    No. 2 Ty. FORM
    Name D100_CONSUME_EVENTS
    LF_ACT_IMP_EXISTING
    X
    5
    8
    0
    0
    %_SPACE
    2
    0
    0
    0
    SY-REPID
    SAPLCV110
    5454453332222222222222222222222222222222
    310C361100000000000000000000000000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    SEEX_TRUE
    X
    5
    8
    0
    0
    LF_EXIT
    F0000000
    0000F000
    %_DUMMY$$
    2222
    0000
    0000
    0000
    GF_OI_CALLED_DISPLAY
    2
    0
    0
    0
    SYST-REPID
    SAPLCV110
    5454453332222222222222222222222222222222
    310C361100000000000000000000000000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    SCREEN
    MCDOK-REFVR
    4444425445522222222222222222222222222222222222222222222222222222222222222222222222222222222222
    D34FBD2566200000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    GF_TRANSACTION
    CV03
    45332222222222222222
    36030000000000000000
    00000000000000000000
    00000000000000000000
    OK_CODE
    BACK
    4444222222222222222222222222222222222222222222222222222222222222222222
    213B000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000
    DRAW
    2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    CL_WB_REQUEST=>TO_IMMEDIATE_START
    PROP_STRING
    360
    6000
    8100
    BITMAP_STRETCH
    2
    0000
    2000
    SY-SUBRC
    0
    0000
    0000
    SS_CENTER
    1
    0000
    1000
    C_DMS_PHIO_MASTER_CLASS
    DMS_PCD1
    4455544322
    4D3F034100
    0000000000
    0000000000
    PROP_TABINDEX
    230
    E000
    6000
    SPACE
    2
    0
    0
    0
    LF_FCODE
    2222222222222222222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000
    No. 1 Ty. MODULE (PAI)
    Name D100_FCODE
    TREEV_ITEM_CLASS_CHECKBOX
    3
    0000
    3000
    Internal notes
    The termination occurred in the function "RxMoveCastErrorObj" of the SAP
    Basis System, specifically in line 2995 of the module
    "//bas/640_REL/src/krn/runt/abmove1.c#7".
    The internal operation just processed is "CAST".
    The internal session was started at 20081202082340.
    Active Calls in SAP Kernel
    Lines of C Stack in Kernel (Structure Differs on Each Platform)
    (CTrcStack2+0x7a)0x63b29a
    (CTrcStack+0xb)0x63b8db
    (ab_rabax+0x2f02)0xa4b1e2
    (_Z18RxMoveCastErrorObj4RUDIS_PKt+0xa5)0x7b7a45
    (_Z8ab_jcastv+0x673)0x7bdec3
    (_Z8ab_extriv+0x219)0x7ab4d9
    (_Z9ab_xeventPKt+0x29a)0x8f9b4a
    (ab_dstep+0x1a7)0xa5ec77
    (dynpmcal+0x39a)0x69d84a
    (dynppai0+0x933)0x69f393
    (dynprctl+0x414)0x69e324
    (dynpen00+0x444)0x693034
    (Thdynpen00+0x2df)0x50a24f
    (TskhLoop+0x307)0x514347
    (tskhstart+0x1ae)0x522fae
    (DpMain+0x28f)0x49b1bf
    (nlsui_main+0x9)0x475159
    (main+0x2e)0x47518e
    /lib64/libc.so.6(__libc_start_main+0xa9)0x2a97124b49
    List of ABAP programs affected
    Index Ty. Program Group Date Time Size Lang.
    0 Prg SAPLCV110 0 2008.12.01 10:13:43 671744 E
    1 Prg SAPMSSYD 0 2008.12.01 02:17:53 21504 E
    2 Prg SAPFSYSCALLS 0 2003.11.06 20:52:59 7168 E
    3 Typ DRAW 0 2008.04.29 10:29:35 11264
    4 Typ DRAT 0 1999.03.10 18:52:49 3072
    5 Typ DMS_DB_DRAT 0 1999.03.10 18:36:01 3072
    6 Typ TDWS 0 2003.09.10 16:46:37 6144
    7 Typ TDWST 0 1997.05.12 16:50:34 2048
    8 Typ AENR 0 2008.11.20 14:51:32 7168
    9 Typ USR03 0 1997.05.12 16:51:23 6144
    10 Typ T024X 0 1998.02.14 10:32:35 2048
    11 Typ MCDOK 0 2004.12.08 17:17:49 28672
    12 Prg SAPLCV121 12 2008.12.01 10:09:17 152576 E
    13 Prg CL_GUI_CFW====================CP 13 2003.11.06 20:53:18 176128 E
    14 Prg CL_GUI_PROPS_CONSUMER=========CP 14 2003.11.06 20:52:43 30720 E
    15 Prg %_CCNTL 14 2003.11.06 20:52:41 16384 E
    16 Prg SAPLTHFB 16 2008.12.01 02:18:03 368640 E
    17 Prg SAPLOLEA 17 2008.12.01 02:00:50 93184 E
    18 Prg SAPLSGUI 18 2008.12.01 02:18:03 76800 E
    19 Prg SAPLSTTM 19 2006.09.21 08:17:23 86016 E
    20 Prg SAPLSBDC 20 2006.09.21 08:24:43 45056 E
    21 Prg SAPLSFES 21 2008.12.01 02:18:03 278528 E
    22 Prg SAPLSPLUGIN 22 2003.11.06 21:28:25 8192 E
    23 Prg SAPFGUICNTL 17 2003.11.06 20:57:18 24576 E
    24 Typ DMS_FRONTEND_DATA 0 2001.06.07 17:41:14 2048
    25 Typ ITDWA 0 1999.12.09 18:54:10 3072
    26 Typ DNTAB 0 2000.11.09 14:07:14 6144
    27 Typ DMS_AUDITS 0 1998.12.10 18:00:41 3072
    28 Typ DRAD 0 1999.12.01 15:17:34 4096
    29 Typ DRAZ 0 1998.04.01 02:05:08 4096
    30 Typ DRAP 0 1995.04.04 16:53:07 3072
    31 Typ DRAOZ 0 1995.04.04 16:53:05 6144
    32 Typ DRAO 0 1995.04.04 16:53:03 6144
    33 Typ TOAV0 0 1996.06.14 09:51:26 3072
    34 Typ DMS_REC_FILE 0 2006.10.12 17:53:17 8192
    35 Typ DMS_DOC_FILE 0 1999.04.21 13:22:51 12288
    36 Prg SAPLCADM 36 2003.11.06 20:53:00 14336 E
    37 Typ TDWA 0 2001.06.07 17:50:38 6144
    38 Prg SAPLCV115 38 2008.12.01 10:13:43 220160 E
    39 Prg SAPLCV118 39 2008.11.30 22:54:57 86016 E
    40 Prg SAPLCV130 40 2008.12.01 09:57:54 342016 E
    41 Prg SAPLCLO0 41 2006.09.21 11:31:12 55296 E
    42 Typ API_CHAR 0 1997.07.09 23:48:05 2048
    43 Typ API_VALI 0 1998.04.23 14:46:27 5120
    44 Typ API_KSSK 0 1996.01.29 18:00:54 3072
    45 Typ API_VALI 0 1998.04.23 14:46:27 5120
    46 Prg SAPLCLFM 46 2008.12.01 03:27:54 711680 E
    47 Typ RMCLF 0 2004.03.15 16:55:47 31744
    48 Typ RMCLKSSK 0 2001.09.18 10:03:47 5120
    49 Typ RMCLAUSP 0 2001.09.18 10:03:46 7168
    50 Typ RMCLDEL 0 1997.08.13 12:51:45 3072
    51 Typ AUSP 0 2001.09.18 10:02:23 6144
    52 Prg SAPLCLSE 52 2008.11.20 14:51:39 188416 E
    53 Prg SAPLCTMS 53 2008.12.01 03:28:16 985088 E
    54 Prg SAPLCTCV 54 2008.12.01 03:27:56 197632 E
    55 Prg SAPLCTCF 55 2008.12.01 03:27:07 20480 E
    56 Typ USR01 0 1998.02.14 15:22:01 4096
    57 Prg SAPLCLPR 57 2001.11.19 16:12:29 64512 E
    58 Typ CLPROF 0 2001.06.07 17:40:33 12288
    59 Typ RMCLPAR 0 2001.06.07 17:45:28 13312
    60 Typ AGR_USERS 0 2003.01.20 16:27:01 3072
    61 Prg SAPLCTCU 61 2008.05.18 09:34:46 189440 E
    62 Prg %_CCXTAB 53 2003.11.06 21:51:14 7168 E
    63 Typ SCXTAB_CONTROL 0 2003.11.06 20:31:00 6144
    64 Prg SAPLCUDB 64 2008.11.30 22:48:18 332800 E
    65 Prg SAPLCUD0 65 2008.12.01 09:57:54 196608 E
    66 Prg SAPLCUEV 66 2001.06.07 18:26:56 12288 E
    67 Prg SAPLSUNI 67 2008.05.18 09:44:54 151552 E
    68 Typ TFDIR 0 1998.07.29 19:49:08 3072
    69 Typ CABN 0 2001.09.18 10:02:26 12288
    70 Typ CABN 0 2001.09.18 10:02:26 12288
    71 Typ DDB_C05 0 1997.08.28 08:44:01 2048
    72 Typ DDB_C02 0 1997.07.09 23:52:49 3072
    73 Typ DDB_ITP 0 1997.08.28 08:44:01 2048
    74 Typ DDB_C07 0 1997.07.09 23:52:50 2048
    75 Prg SAPLCUTM 75 2006.09.21 11:40:39 68608 E
    76 Prg SAPLCUPM 76 2008.05.18 11:52:42 472064 E
    77 Prg SAPLSLG0 77 2003.11.06 20:53:05 64512 E
    78 Prg SAPLSBAL_SERVICE 78 2008.05.18 09:48:19 172032 E
    79 Typ BALOBJ 0 1997.08.13 13:16:25 2048
    80 Typ BALSUB 0 1997.08.13 13:16:26 2048
    81 Typ BAL_S_LFIL 0 2000.12.04 12:45:13 12288
    82 Prg SAPLSBAL 82 2008.05.18 09:48:19 327680 E
    83 Typ BAL_S_LOG 0 2000.12.04 13:04:00 7168
    84 Typ BAL_S_CONT 0 1998.11.02 09:43:07 2048
    85 Typ BAL_S_PARM 0 2000.12.04 12:45:14 3072
    86 Typ BAL_S_CLBK 0 1998.11.02 09:43:07 2048
    87 Typ BAL_S_SCNT 0 1998.11.30 15:52:33 3072
    88 Typ BAL_S_SDEF 0 2000.12.04 12:45:15 2048
    89 Prg CL_ABAP_CHAR_UTILITIES========CP 89 2004.11.12 14:02:13 14336 E
    90 Prg SAPLSYGU 90 2003.11.06 20:55:40 29696 E
    91 Prg SAPLCUXP 91 2008.12.01 10:09:15 147456 E
    92 Typ CUXP_01 0 1995.04.10 15:58:58 3072
    93 Typ T100 0 1997.08.28 09:04:45 2048
    94 Typ CUXP_02 0 1995.04.10 15:58:59 2048
    95 Typ CUXP_02 0 1995.04.10 15:58:59 2048
    96 Typ TMS_JUST 0 1995.04.10 16:02:55 2048
    97 Typ CUXP_02 0 1995.04.10 15:58:59 2048
    98 Prg SAPLCUTC 98 2003.11.11 20:31:28 89088 E
    99 Prg SAPLCUTRC 99 2008.12.01 02:26:11 87040 E
    100 Typ CTMS_01 0 1997.08.13 12:25:20 3072
    101 Typ INCL_BILD 0 1997.05.12 15:10:50 2048
    102 Typ AUSP 0 2001.09.18 10:02:23 6144
    103 Prg SAPLCCRL 103 2008.11.30 22:34:49 144384 E
    104 Typ AEOIB 0 2001.09.18 10:02:18 7168
    105 Typ TCC09 0 1999.03.17 16:24:37 2048
    106 Typ AEOI 0 2001.09.18 10:02:17 5120
    107 Prg SAPLCCCN 107 2008.11.20 14:51:39 293888 E
    108 Typ AEOIT 0 2001.09.18 10:02:18 3072
    109 Typ CCIN 0 2001.10.09 13:06:55 6144
    110 Typ CCCN_XFACE 0 2001.10.09 13:06:55 7168
    111 Prg SAPLCCBU 111 2008.11.20 14:51:39 33792 E
    112 Prg SAPLCV150 112 2008.11.20 14:51:40 144384 E
    113 Prg SAPFSPOR 0 2008.12.01 07:23:38 14336 E
    114 Prg SAPLSCNT 114 2003.11.06 20:53:04 30720 E
    115 Typ DYCBOX 0 1998.08.20 11:16:53 3072
    116 Prg SAPLSVSM 116 2006.09.21 08:56:23 29696 E
    117 Prg CL_DATAPROVIDER===============CP 117 2003.11.06 20:52:43 52224 E
    118 Typ OBJ_RECORD 0 1998.02.14 08:30:43 2048
    119 Prg SAPLSTUP 119 2006.09.21 08:34:57 75776 E
    120 Prg SAPLCNDP 120 2006.09.21 09:10:54 208896 E
    121 Prg SAPSHDTV 114 2003.11.06 20:57:23 33792 E
    122 Typ SHDTVCIU 0 1998.12.14 23:15:37 3072
    123 Typ SHDSTU 0 1998.12.14 23:15:34 2048
    124 Typ SHDSTCIU 0 1998.12.14 23:15:34 2048
    125 Typ ARFCRDATA 0 2000.11.09 14:04:16 6144
    126 Prg SAPLGRFC 126 2003.11.06 20:53:02 16384 E
    127 Typ SWCBCONT 0 2000.11.15 17:55:11 3072
    128 Typ OLE_VERBS 0 1995.04.04 16:02:20 2048
    129 Typ OLE_PA 0 1995.04.04 16:02:19 2048
    130 Prg CL_DYNAMIC_GUI_EXTENSIONS=====CP 130 2003.11.06 20:52:43 37888 E
    131 Prg CL_GUI_DATAMANAGER============CP 131 2006.09.21 09:11:48 77824 E
    132 Prg CL_EXITHANDLER================CP 132 2008.12.01 02:24:29 34816 E
    133 Prg SAPLSEXV 133 2008.12.01 02:05:16 124928 E
    134 Prg CL_BADI_FLT_DATA_TRANS_AND_DB=CP 134 2008.12.01 02:24:26 44032 E
    135 Typ SXS_ATTR 0 2001.08.20 12:23:27 4096
    136 Typ V_EXT_ACT 0 2000.11.09 14:27:05 2048
    137 Typ SXC_EXIT 0 2000.11.09 14:23:43 2048
    138 Prg CL_EX_DOCUMENT_MAIN02=========CP 138 2008.04.29 10:29:37 80896 E
    139 Prg IF_EX_DOCUMENT_MAIN02=========IP 132 2008.04.29 10:29:39 30720 E
    140 Prg %_CSXRT 138 2004.11.12 13:45:31 16384 E
    141 Prg CL_EXIT_MASTER================CP 141 2006.09.21 09:10:54 24576 E
    142 Typ SXS_MLCO 0 2000.12.04 14:59:55 2048
    143 Prg CL_EX_BADI_LAYER==============CP 143 2006.09.21 09:10:54 32768 E
    144 Prg IF_EX_BADI_LAYER==============IP 132 2006.09.21 08:51:19 9216 E
    145 Typ V_EXT_IMP 0 2003.11.06 20:40:20 3072
    146 Typ V_EXT_IMP 0 2003.11.06 20:40:20 3072
    147 Typ SXC_IMPSWH 0 2000.11.09 14:23:44 2048
    148 Prg ZCL_IM_DOCUMENT_MAIN02========CP 148 2008.12.01 14:50:50 7168 E
    149 Prg SAPLASTAT_TRIG 149 2003.11.06 20:53:00 13312 E
    150 Typ ASTAT_TYP2 0 1998.11.10 05:35:18 2048
    151 Typ ASTAT_TYP1 0 1998.11.30 15:54:16 2048
    152 Prg CX_SY_MOVE_CAST_ERROR=========CP 152 2003.11.06 20:41:23 11264 E
    153 Typ SCX_SRCPOS 0 2000.11.09 14:12:15 2048
    154 Prg CX_DYNAMIC_CHECK==============CP 154 2003.11.06 21:33:04 10240 E
    155 Prg CX_ROOT=======================CP 155 2003.11.06 21:56:05 12288 E
    156 Prg CX_NO_CHECK===================CP 156 2003.11.06 21:33:04 10240 E
    157 Prg CX_SY_NO_HANDLER==============CP 157 2003.11.06 21:33:04 10240 E
    158 Typ SYST 0 2000.12.04 14:54:51 31744
    159 Typ SFBM_XCPTN 0 2000.12.04 14:54:21 3072
    160 Prg CL_WB_REQUEST=================CP 160 2008.12.01 02:25:56 71680 E
    irectory of Application Tables
    ame Date Time Lngth
    Val.
    rogram SAPLCV110
    YST . . : : 00004608
    \0\0\0\0\x0001\0\x000E\0\0\0\0\0\0\0\0\0\0\0\0\0\x000E\0
    RAW 2008.04.29 10:29:35 00003196
    RAT . . : : 00000236
    MS_DB_DRAT . . : : 00000238
    DWS . . : : 00000268
    DWST . . : : 00000048
    ENR . . : : 00000496
    00 00000000 00000000
    SR03 . . : : 00000876
    T024X . . : : 00000074
    MCDOK 2004.12.08 17:17:49 00013650
    TDWA 2001.06.07 17:50:38 00000340
    0000
    Program CL_GUI_PROPS_CONSUMER=========CP
    EUDB . . : : 00004068
    %C002380004933B6098D9166C5E1000000AC1F7825 \0\0\0
    Program SAPLCLFM
    RMCLF . . : : 00003736
    Program SAPLCTMS
    RCTMS 2002.04.17 10:32:13 00002034
    Program SAPLCTCF
    USR01 . . : : 00000220
    Program SAPLCLPR
    RMCLPAR . . : : 00000418
    SAPPROFILE
    CLPROF . . : : 00000272
    600BMENGQC001 X X XXX
    AGR_USERS . . : : 00000164
    0000000000000
    Program SAPLSUNI
    TFDIR . . : : 00000188
    CUD0_CUSTOM_CONFIG_INITIALIZERSAPLCUD0
    Program SAPLCCRL
    AENR . . : : 00000496
    00 00000000 00000000
    AEOI . . : : 00000436
    00
    Program SAPLCCCN
    CCIN . . : : 00000600
    00 0
    Program SAPSHDTV
    SHDSTU . . : : 00000106
    SHDSTCIU . . : : 00000100
    ABAP Control Blocks (CONT)
    Index Name Fl PAR0 PAR1 PAR2 PAR3 PAR4 PAR5 PAR6 SourceCde Line
    409 DWRI 01 0042 CL_EX_DOCUMENT_MAIN02=========CM007 128
    410 WRIT 00 C026 CL_EX_DOCUMENT_MAIN02=========CM007 128
    411 PAR1 C0 0000 CL_EX_DOCUMENT_MAIN02=========CM007 128
    412 JEND A6 0000 CL_EX_DOCUMENT_MAIN02=========CM007 128
    413 DWRI 01 0043 CL_EX_DOCUMENT_MAIN02=========CM007 128
    414 WRIT 00 C027 CL_EX_DOCUMENT_MAIN02=========CM007 128
    415 PAR1 C0 0000 CL_EX_DOCUMENT_MAIN02=========CM007 128
    416 JEND A6 0000 CL_EX_DOCUMENT_MAIN02=========CM007 128
    417 FUNE 01 006E CL_EX_DOCUMENT_MAIN02=========CM007 128
    418 ENDF 00 0000 CL_EX_DOCUMENT_MAIN02=========CM007 128
    419 MESS 00 0000 CL_EX_DOCUMENT_MAIN02=========CM007 128
    420 BRAX 00 0015 CL_EX_DOCUMENT_MAIN02=========CM007 133
    CAST 00 0000 C006 C028 CL_EX_DOCUMENT_MAIN02=========CM007 134
    423 METH 03 0003 0000 8001 0000 0000 0000 0000 CL_EX_DOCUMENT_MAIN02=========CM007 135
    427 PAR1 01 C000 CL_EX_DOCUMENT_MAIN02=========CM007 135
    428 PAR1 81 C001 CL_EX_DOCUMENT_MAIN02=========CM007 135
    429 PAR1 81 C002 CL_EX_DOCUMENT_MAIN02=========CM007 135
    430 PAR2 00 0000 0002 0000 CL_EX_DOCUMENT_MAIN02=========CM007 135
    432 PAR2 00 0000 006E 0001 CL_EX_DOCUMENT_MAIN02=========CM007 135
    434 BREL 04 0000 CL_EX_DOCUMENT_MAIN02=========CM007 143

    Hi,
    As per your query, pls contact any abap consultant regarding this he will provide the solution. Because some times programe given some error then the abaper see the programe and take action accordingly.
    Anil

  • A Problem for the Ages...

    OK. I'm incredibly frustrated right now, and am facing the damndest computer problem I have ever seen in my entire life. Some people thrive when confronted by incredibly difficult problems, I just get really pissed off because my computer ought to behave, and it isn't. So here is my LONG story, and I hope there  people here who thrive on solving bizarre, inexplicable PC problems:
    Two weeks ago, my computer turned itself off in the middle of the night. It was on and fine when I went into bed; when I woke up it was off. I turned it on, and just before it reaches the "Windows XP" loading banner, it restarts itself. This is repeated every time.
    When I try using Safe Mode (I tried all Safe Modes, normal, last known good, networking, command prompt, etc) the same damn thing happens. It starts loading device drivers, gets to "/DRIVERS/MUP.SYS" and restarts. (I later copied MUP.SYS from my dad's XP Pro computer to my hard drive, but problem persists)
    I tried booting off the Windows XP boot cd. It hangs when it's at the blue screen that reads "Setup is starting Windows..." every time.
    So I then began removing peripherals. I tried just one hard drive, my PCI video card (recently sold my AGP card and was working with an old PCI Voodoo3), and my one stick of PC3200 RAM. Same thing.
    I changed the RAM, using a PC2700 stick. Same thing. I removed the hard drive so that only my CD-ROM was connected to the motherboard. I booted off the CD, it STILL freezes at that screen (see above).
    I took my hard drive and placed it in another computer. It booted fine, up to the Windows Log-in screen (I did not log in because I did not want Windows to start modifying itself according to the other computer's hardware).
    So I tried different video cards, AGP and PCI. Same deal. One strange thing that happens is that sometimes, when I try to start the computer, it gives me one long beep, pauses a few seconds, and repeats the beep again and again. There is no POST code consisting of one repeated, long beep, not according to Phoenix AwardBIOS' website (they make my BIOS). I have to turn the machine on and off a few times, and then it starts up fine. Sometimes this doesn't happen at all and it boots up fine.
    Finally I RMA'd my motherboard. The new motherboard came in today. I hooked her all up, and guess what? SAME PROBLEM!!! Obviously the motherboard is not at issue here.
    Again, the motherboard in it right now is A NEW ONE that has just been RMA'd from MSI. It shows some wear so it clearly is refurbished, but the BIOS has just been flashed with the latest revision, etc., and they have tested it and everything so I think the possibility of a BIOS reflash being the solution is even more remote than overheating.
    I tried a second PSU. No dice.
    One more thing of note: my C:\ is an NTFS drive. A normal bootdisk can't access it, so it certainly can't FDISK or CHKDSK or anything else to it. I have tried to find a way to create an NTFS-compatible bootdisk (even followed instructions on Microsoft's site) and they don't allow me commandprompt-level access to the NTFS drive.
    In that vein I will also point out that I don;t think it's the hard drive. I booted my hard drive in another machine and it was fine; I then took another machine's hard drive and put it in mine, and had the same problem.
    I'm completely at my wit's end here. Again the other damning thing, which I mentioned above, is the spontaneous tendency of the motherboard to beep. A single, long, loud beep, repeated consistently on boot, and no video being shown on the monitor. I reboot a few times, same thing, reboot again, it works fine. Why? ? This has happened on BOTH motherboards, my original and this new, RMA'd motherboard (same model of course).
    At this point I am at my wit's end. Anyone got any ideas???
    Edited for language...
    SYSTEM SPECS:
    AMD Athlon XP 2600+ (Barton)
    MSI K7N2-Delta (MS-6570-020 model #) motherboard
    One 512mb stick of PC3200 RAM, Corsair Value Select
    Western Digital Hard Drive (120gb) special edition (primary hdd)
    Maxtor 20gb Hard Drive (secondary, nonbootable hdd)
    Creative Labs Sound Blaster Audigy 2 PCI
    SMI 2602W Wireless Networking Card PCI
    3dfx Voodoo3 3000 PCI (also tried VOodoo3 2000 PCI, eVGA GeForce 2 Ti4200, all same results)
    Pioneer 115 DVD-ROM
    ASUS 50x/48/24 CD-RW

    Ok.  Relax.  Take a deep breath and avoid beeing near any mace; who knows it could be found in your case by "accident".
    What I'm about to say is REALLY really basic.  Even dumb.
    Next time you have such a problem, try to go for the obvious first;  Check your CPU fan.  Saved me a few hours of scratching alot of times.  Test your ram with memtest86+ http://www.memtest.org without any HD in.
    Next, check for the latest BIOS in.  Now if everything is cool there, it MUST be your software that has a problem.   XP often boot differently when on another system, be careful.
    I'd look into a nice backup/format XP thing.  Takes some time, but might erraticate the suffering.  Anyways, keep me posted.

  • How should i solve the problem for the exception.

    <b>Web is below:</b>
    Error when processing your request
    <b>What has happened?</b>
    The URL http://xxxxxxx.xxxxx:xxxxxx/sap/bc/bsp/sap/xxxxxxx/result.htm was not called due to an error.
    <b>Note</b>
    The following error text was processed in the system D50 : The current application triggered a termination with a short dump.
    The error occurred on the application server sapcidev01_D50_00 and in the work process 1 .
    The termination type was: RABAX_STATE The ABAP call stack was:
    Form: DIALOG_CHECK of program CL_IMC_MODE===================CP
    Form: PREPARE_MODE of program CL_IMC_MODE===================CP
    Form: GET_MODE_BY_NAME of program CL_IMC_MODE===================CP
    Form: SEND_COMMAND of program CL_DV_IMC_CLIENT==============CP
    Form: PROCESS_COMMAND of program CL_DV_SDV=====================CP
    Form: DISP_DOC of program CL_DV_SDV=====================CP
    Form: DISP_AO_DOC of program CL_DV_SDV_AO==================CP
    Form: DISP_AO_DOCS of program CL_DV_SDV_AO==================CP
    Function: ALINK_DISPLAY_IMC of program SAPLALINK_DISPLAY_DOCUMENT
    Function: ARCHIVOBJECT_DISPLAY of program SAPLOPTA
    <b>What can I do?</b>
    If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system D50 in transaction ST22.
    If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server sapcidev01_D50_00 in transaction SM21.
    If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server sapcidev01_D50_00 . In some situations, you may also need to analyze the trace files of other work processes.
    If you do not yet have a user ID, contact your system administrator.
    Error code: ICF-IE-http -c: 151 -u: 117846 -l: E -s: D50 -i: sapcidev01_D50_00 -w: 1 -d: 20070320 -t: 062938 -v: RABAX_STATE -e: MESSAGE_TYPE_X
    HTTP 500 - Internal Server Error
    Your SAP Internet Communication Framework Team
    <b>Run ST22 and information is below:</b>
    Source Code Extract
    Line SourceCde
    1 METHOD DIALOG_CHECK.
    2 DATA: GUI_FLAG TYPE SY-BATCH.
    3
    4 * IMC NUR in Online-Modus ? (kein Batch und dunkle Batch-Input-Betrieb)
    5 IF GUI_IS_ON IS INITIAL.
    6 CALL FUNCTION 'RFC_IS_GUI_ON'
    7 EXPORTING
    8 LOGIN_CHECK = ' '
    9 IMPORTING
    10 ON = GUI_FLAG.
    11
    12 IF GUI_FLAG <> 'Y'.
    13 IF RABAX IS INITIAL.
    14 CLEAR EXISTS.
    15 ELSE.
    >>>>> MESSAGE X005(IMC).
    17 ENDIF.
    18 ELSE.
    19 GUI_IS_ON = 'Y'.
    20 EXISTS = 'X'.
    21 ENDIF.
    22 ELSE.
    23 EXISTS = 'X'.
    24 ENDIF.
    25
    26 ENDMETHOD.
    i can access the other bsp web.but this bsp application raises the exception. Who can help solve the problem?
    I appreciate your help.

    Is it SAP BSP application or custom?
    If its custom,check whether you are using any MESSAGE statements. Handle all the Exceptions from Class/Methods/Function module to avoid the Dump.
    Raja T

  • ISE 1.1.3 provisioning problem for the first DOT1x connection

    Hello all,
    I am wondering how a wired dot1x client can get the NAC agent downloaded for its very first connection from ISE ?
    Should the Agent be installed before the first connection ?
    I'have set up ISE 1.1.3 for provisioning (files have been downloaded from cisco website) (upgrade mandatory)
    I have an AuthZ rule for a correct posture assessment
    and
    another AuthZ rule for an unknown posture assessment that triggers a posture remediation (file download)
    (in that order)
    NAC agent is properly configured ( FQDN...), the users gets and nothing happen !
    no NAC upgrade
    no NAC assessment.
    Any idea ?
    Does it take a while for the new agent to be downloaded ?
    Best regards.
    V.

    In order to troubleshoot the NAC agent problem, we need to check  couples of things.like
    1.)Ensure that the discovery host address on the Cisco NAC agent or  Mac OS X agent is pointing to the Cisco ISE FQDN. (Right-click on the  NAC agent icon,
    choose Properties, and check the discovery host.)
    2.) Ensure that the access switch allows Swiss communication between  Cisco ISE and the end client machine. Limited access ACL applied for the  session should allow Swiss ports:
    permit tcp any host 80.0.80.2 eq 8905 --> This is for posture
    communication between NAC agent and ISE (Swiss ports)
    permit udp any host 80.0.80.2 eq 8905 --> This is for posture
    communication between NAC agent and ISE (Swiss ports)
    deny ip any any
    3.)If the agent login dialog still does not appear, it could be a  certificate issue. Ensure that the certificate that is used for Swiss  communication on the end client is in the Cisco ISE certificate trusted  list.
    4.) Ensure that the default gateway is reachable from the client  machine.
    As per your confirmation, I am going to close the case for this specific  inquiry. We strive to provide you with excellent service. Please feel  free to reach out to me or any member of the SAC team if we can be of  any further assistance or if you have any other related questions in the  future. We value your input and look forward to serving you moving  forward.

  • Problems with the transport of substitutions

    Hi all.
    We have developped some substitutions. We have checked that everything is alright in development environment, and then we have tried to transport to quality environment. The transport log has no errors, and the control tables have been filled with the same data in both environments.
    But when you go to transaction OBBH to see the transported validation, the line of every step in the validation where the exit is specified is missing in quality environment. Any idea?
    Details:
    - It is a substitution of Financial Accounting / Complete Document
    - The parameter type of the substitutions is C_EXIT_PARAM_CLASS
    - The exits has been declared in the following way:
              FORM U913 USING bool_data TYPE gb002_015.
    - Generation program RGUGBR00 has been executed in both environments
    Do you see anything that seems incorrect?
    Thanks in advance,
    Carlos

    Hola Carlos,
    Tengo el mismo problema que tú describes en el foro. En desarrollo me funciona bien la sustitucion y en calidad ya no.
    Esto es porque la tabla GB01 está diferente en desarrollo que en calidad.
    ¿Tú como le hiciste para modificar en calidad la tabla GB01 para quitarle la marca al "BEXCLUDE"?
    Gracias de antemano, saludos!

  • Looking for the New Upgradations in Project Costing from 11.5.3 to 11.5.10

    Hi All,
    Iam looking at the New Features added in Project Costing as we need to give a demo for the client on the advantages of Upgrading from 11.5.3 to 11.5.10. any record on these lines would be of great help to us.Appreciate your kind suggestions in this regard.
    Thanks in Advance,
    Satyam Team

    Hi, a basic brief of the upgrade the principal steps are:
    1.- Cloning your 11.5.3 OEBS to a new server (IBM AIX 5.2), with similar characteristics to the final server in Production.
    2.- To continue with the steps described in the note of metalink 316365.1 - Oracle Applications Release 11.5.10.2 Maintenance Pack Installation Instructions.
    3.- To do a set of tests that include cycles of revenue and expenditures, this way as technical tests, and review all customizations.
    This basic step must be led to end in an environment of test, and when all the tests certified the environment , to do it in production server.
    Good Luck

Maybe you are looking for

  • How to loop an swf a set number of times?

    I need to loop a banner animation a set number of times, then get it to gotoandstop on a final frame. I know in the past I could use: counter++; if (counter<5) { gotoAndPlay (1); } At least for the looping part (don't even know yet about the stop pon

  • Object/variable synchronization

    i need to synchronize a primitive type (or object), am i doing it correctly? private static boolean threadStarted = false; public void init(){     sunchronized (threadStarted){         if (!threadStarted){             schedulerThread = new Scheduler(

  • Licence refusée

    Je possédais une licence Acrobat 10. Je viens d'installer Web Premium CS. Mon numéro de licence est accepté pour tous les composants sauf Acrobat. J'ai donc désinstallé le nouvel Acrobat et depuis je ne peux pas non plus utiliser l'ancien, même avec

  • Distribute new entries against existing reference data, Integrated Planning

    Dear Experts, Within IP, I struggle with how to distribute new entries against existing reference data. Example: Reference data: Product   /   Customer   /   amount P1               C1                  100 P1               C2                  150 P2 

  • Problems with the WRT54GS

    Hello everyone! I've just bought the WRT54GS router and am having some difficoultys with it. I've managed to get it up and running with the CD, that came along within the package. And the first impresion was WOW. Compared to my previous router, this