PROBLEM FULL SCREEN

Hello, when it updates to the new version of flash player I have noticed that on having put in full screen, aveces stays the video or the content flash behind the windows.
It notices: However much it deactivates acceleration for hardware, it continues doing it.
Does this happen to them???
Since I return to a previous version of flash player, wherefrom her under?
Current version: version 10,2,152,26 installed
Windows: 7 ultimate 64 bist
Text translated for google, forgive!! I speak Spanish

Hello,¿Usted inhabilitó aero-? Éste es el Web site para las más viejas versiones. Jugador de destello 10.1.102.64.
http://kb2.adobe.com/cps/142/tn_14266.html Adobe también tiene un foro para los usuarios españoles, aquí: http://forums.adobe.com/community/international_forums/espanol Espero que esta información sea provechosa.
Gracias, eidnolb

Similar Messages

Jpeg editing and problem full screen preview

Hello,
I am editting some jpegs together to music and in order for my photos to stay sharp, in sequence settings i have kept the compressor and pixel aspect ratio the same as the images when i look at them in item properties.
So they are compressed by photo jpeg, square and none field dominance.
The problem is that when i drop new photos into the timeline, they now need to be rendered and im not sure why?
Also, when i full screen preview on my imac monitor, you can hear the audio but cant see any images until you pause the movie and then the place where you have paused is shown.
Can anyone please help???
Regards,
Michael

michael gibson wrote:
Hello, i change the compressor from photo jpeg to dv pal as didnt have prores lt. All frame rates and dimensions are the same but i dont really understand field dominance and what progressive means?
No ProRes? What version are you using? Anyways, using DV might get you some slight problems as it's not exactly square pixels ... but it should be negligible.
Field dominance tells you which field (a "half frame") is displayed first when playing back interlaced media. Interlaced video does not have full frames but each frame is composed of two fields, each of which has half of the horizontal lines of the full frame. DV's field dominance is upper, all the other interlaced formats are lower field first. If you set the field dominance to "none" in FCP you get a progressive sequence, meaning you'll have full frames.
You're saying that you changed to DV PAL ... are you in PAL Land? Also you didn't say what your final output will be ... File based? DVD? Web? If there is only one output you should adjust your sequence settings for that.
mish

Transition Problems in Full Screen View

Hi.
I've created a Powerpoint presentation on the Bayeux Tapestry which I now want to convert to a PDF document so that I can add multimedia.
My Powerpoint presentation features photographs of a section the tapestry with each photograph placed on a separate slide. I've used the Powerpoint 'push left' transition to create a panoramic effect which creates the illusion that the tapestry is being scrolled from right to left as the viewer clicks through the presentation. It all works very well in Powerpoint as the slides butt up against each other in transition without any 'seam' between them.
I thought I could simply replicate the effect in Acrobat 9 by converting the presentation to PDF and selecting the 'push left' transition from Advance/Document Processing options then launching the document in full screen view. However, I've found that using a push left transition in Acrobat creates wacking great gaps between the pages as they scroll right to left: this absolutely ruins the whole effect.
As you can probably tell, I'm pretty much a newbie with Acrobat 9 (but not with other Adobe applications) and I can't work out for the life of me how to get around this problem. Is there someting simple that I'm overlooking on the full screen view options or perhaps in the Powerpoint conversion settings or do I have to start adjusting resolutions etc? Or maybe it's just the nature ofthe beast (do hope not)?
I'd be very grateful for any enlightenment or advice.
PS: Forgot to mention the Powerpoint was created in default landscape layout and hence so is the PDF.

Do you have the PDF version to fill the full screen and not leave borders? If you print to PDF (not create PDF), then a margin is added by default (as when you print to paper). The border can be reduced to 0, but that is an extra step with the print. As I recall, the PDF Maker (create PDF) does not include the margins. Thus the whole margin bit may be the issue.

Lenovo 3000 N200 0769 Vista 32bit video driver (NVidia) full screen video problem

Hi, would appreciate an update from Lenovo about this.
The NVidia VGA driver just displays a blank screen when playing video in full screen mode when hardware acceleration is turned on (the default setting). Obviously it's a pain to turn off the hardware acceleration just to get full screen video working.
There is a generic version of the driver available from Nvidia but they advise not to use it as the oem versions are apparently modified for features like turning the screen off when the lid is closed. Maybe someone's tried the generic NVidia driver and can let me know if it's worth a go. Ideally it would be nice to hear if Lenovo are aware of the problem and are going to release an update.
Thanks
Cliff

im not sure if this will help new to forum but hey here u go anyways scan through the guide about the suipport & downloads should have all ur info there
http://forum.lenovo.com/lnv/board/message?board.id=N_Series_Lenovo_3000&message.id=2652

FULL SCREEN DISPLAY problema

Hello everybody!
I've written my first code for J2ME MIDP. I'm learning about paint method of Canvas class.
I put below code in the paint method:
g.drawString("Width: "+Integer.toString(getwidth()),0,0,Graphics.TOP|Graphics.LEFT);
g.drawString("Width: "+Integer.toString(getheight()),0,0,Graphics.TOP|Graphics.LEFT);
g.drawArc........ etc...
When I ran that application on my SE K700i, I can see the information of the width and height of the display screen, that is "W=176 H=176".
But when I ran it on my brother's Nokia 3660, I got "W=176" and "H=144".
Last, I ran it on my sister's Nokia 6610, I got only "W=128" and "H=96".
My questions are:
- Can I set it to a defined size, so when we ran it on any types of devices, we get the same size of display screen?
- There is a panel on top of the screen that show the battery and signal indicators, and one on bottom of the screen for command action. Can I set the application ran FULL SCREEN (no any panels)?
Thanks very much for any reply!

Hi,
There are no standard methods available for scaling images.
But, when you are using TiledLayers and moving Sprites, then you just can keep the images the same. On a phone that has a large screen, you just 'see' more of the game. When you're using a phone that has a smaller screen, then you just 'see' less of the game screen.
There are tutorials and other documents available on the web describing the creation of games using TiledLayer, Sprite and GameCanvas.
But, don't use (create) images that are as large as your screen. It will cause an attack on your device's heap memory and it will introduce inconvenient problems when running the game on different devices with different screensizes...
Good luck!
Cheers,
Jasper

8.1 full screen problems landscape

Since updating to 8.1 Tapping to view videos in full screen goes to portrait full screen instead of landscape full screen while in landscape position. There are also problems trying to full screen in portrait position.
i pad mini retna 16 gig
Geeno12

Your statement is a bit vague as to where you see this behavior.... In the Videos App, Safari, YouTube? Every video In every app? WIthout more details, try the basic troubleshooting steps. Clear Safari, close all apps, reset your iPad. If that doesn't help, reset all settings.
Go to Settings>Safari>Clear History and Website Data
Now close all apps. In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If those three things made no difference, try this. Reset all settings. You will not lose any data, but most of the device settings will have to be entered in the settings app again. Settings>General>Reset>Reset all Settings.

I have problems with my project in imovie, when I play the proyect in full screen it interrupts and tells me to report it to apple...what can I do? I need to finish and convert in video and just cant, who can help me? My mac is Air...

Dear comunity I need urgent assistance with my imovie proyect
I have problems when I check my proyect in full screen it simply stops and aborts out of imovie, tells me that ocurred an error and asks me if I want to report to apple the error. But dont know if the problem is that I have too many resources in the proyect. Its long and has a lot of videos and music all the proyect, also it has about 20 min.
please help me

Please authorize ADE 3 with same credentials that you used with older version of ADE

Problems with Itunes Full Screen in MBA 2013 - 10.9 - Flickering Subtitles

All,
I have an issue when I use subtitles in HD movies (Wolverine being the latest example) using iTunes 11.1.3 and play it in full screen on 10.9. Subtitles flicker and sometimes when the next subtitle appears, the old one stays while flickering. It works perfectly when not in full screen. It also works well without subtitles (even though I think it does flicker a bit)
Has anyone else noticed this?
I have also noticed that when I move my mouse so the control-pad comes up (play/pause/etc), the screen flickers a bit. This did not happen in Mountain Lion.
Thanks,
Alex

I found a temporary answer for this problem. While in fullscreen you can pull the control panel in a corner, and stay with your mouse pointer on it, the subtitles appear correctly and you can watch the movie in fullscreen.
But i hope, there is an update comming to solve this problem.

Macbook Pro connected to HDTV full screen problem

I connected my Macbook Pro to my TV via HDMI. When i have an application on the TV (safari) and press the full screen button (upper right corner with the 2 arrows) my Macbbok display shows this grey area. If fulscreen an application on the Macbbok display the same thing happens. Aslo when i navigate through the full sceen apps in one display hte other display also changes. Is there something that solves this problem?

This is just an educated guess, but I think your problem may be distance. It sounds like you've got 60' of cable running to a splitter, then more cable to two TV's that are 50' apart. This article seems to indicate HDMI distance isn't reliable with that much cable.
http://www.bluejeanscable.com/articles/how-long-can-hdmi-run.htm
An easy test would be to try it with shorter cables. If that works at least you know where your problem lies.

I have problem with Flash Player. Full screen doesn't work correctly. Turning off hardware acelleration helps but I want this option to work.

Problem exist only on YouTube. When i want get full screen, I have black screen with audio. If I click few times full screen button it helps, but I want to go to full screen by one click.
If i turn off hardware acceleration everything is ok but vids looks terrible.
I have this problem with Flash Player 10. No 9 works good, but some websites wants no. 10

Generaly FP works, but problem is that i must press few times full screen button. Now i have turn off hardware accelleration, but movies are quite bad.
I have already installed newest graphic drivers but it didn't help.
Everything was good unless Flash Player and Mozilla notificated that update is necessary :<

Problem in making air application in full screen on load

Hi all
I am new in flex developing. The problem I m facing in making a air application is that I want to make the application window in full screen view without the top toolbar.
The code i got is like:
<mx:Button label="fullscreen" click="stage.displayState = StageDisplayState.FULL_SCREEN_INTERACTIVE;"/>it is working on click the button.
But I want this on starting the application. Without any user interface.
Thanks and Regards

Extensions require both native code and ActionScript code and are packed by the native extension compiler by Adobe to an ANE file. Check this tutorial: http://www.adobe.com/devnet/air/articles/building-ane-ios-android-pt1.html
After compiling the extension, you can put the extensionId into your <extensions> branch in the application.xml and add the .ane as an excluded library into your AS3 project. Then you can use the extension like any other external library (swc file).
It's also helpful to download and play around with extisting ANEs. There are some nice open source libraries here: https://github.com/freshplanet

.Swf file full screen problem

Hi, i'm using FMS 4.0 to perform an rtmp stream and an .swf player, built in Flash professional to open the stream!
My problem is that when i embed the swf into my site (www.livezone.gr), all the buttons work except of the full screen button! To embed the swf file i have uploaded it to my web server first in a folder which also includes the Skin.swf file and
i use the following code to embed it :
<iframe src="My Video.swf" frameborder="0" width="610" height="480"></iframe>
The problem is only when embeding it,otherwise when i open it directly from my webserver or my pc everything works fine!
.That's my only problem,if you can help me solve it everything will work like a charm!
Thanks in advance, Michail Papamichalakis

open the fla that published your swf. click file>publish settings, tick html if it's not already ticked. click the html tab>click the template combobox and select flash only - allow fullscreen.
then click file>publish.
you should see your swf file (re)published and an html file in the directory with your fla.
put the flash published swf and html in the same directory with your iframe containing html file and change your iframe tag to:
<iframe src="Live%20Streaming%20player1.html" frameborder="0" width="610" height="480" ></iframe>
assuming that's the name of the html file published by flash.

Full Screen problem opening PDF on PC projector

Using Flash CS3 on Mac - creating both Mac and PC projector files to go on a CD presentation
Ok I have come across the following problem.
When the CD is inserted the presentation starts automatically (on PC) and gives a list of PDFs which can be opened using EXEC fscommand. All works fine with the Mac version but on the PC version the Flash projector opens in Full Screen Mode and runs ok until I choose to open a PDF, then the presentation changes to Windowed Mode!!!
Is there any way to stop the PC version of the projector leaving Full Screen Mode when a PDF is selected
Any help would be appreciated

hi Hordika,
Thanks for Posting!
Try Checking with Background Programs.
Try Following a Clean Boot Procedure
http://support.microsoft.com/kb/929135
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Full Screen Problem With Dual Monitor Viewing

I have a 64 Bit system, Chrome browser and with flash player built in. I am attempting to view videos on a 2nd monitor while working on the primary monitor. I have tried this on various sites, TNT.tv, USANetworks.com, etc... I select full screen viewing. A message is displayed to exit full screen press escape. However, when I attempt to do anything else automatically exit full screen on the second monitor. This should not be an issue and with the way most people view video online, they are doing so on a 2nd monitor or TV. I have done a google search and it is a common problem, but there is no solution that seems to work.

I have just posted the same question - missed yours.
Adobe could you take a look into this - I think solving this problem can't be that hard.
jef

Problem in full screen

In full screen i have no picture of my TV. Screen is black. When it is not full screen i can watch the TV it is OK. Flash Player is good version.

Welcome to the Adobe Forums.
The more information you supply about your situation, the better equipped other community members will be to answer. Please supply the following Information where applicable:
    •    Adobe product and version number
    •    Operating system and version number
    •    Browser and version number (where applicable)
    •    The full text of any error message(s)
    •    What you were doing when the problem occurred
    •    Screenshots of the problem (if possible)
    •    Computer hardware, such as CPU; GPU; amount of RAM; etc.

PROBLEM FULL SCREEN

Similar Messages

Maybe you are looking for