Problem getting a wireless connection to HP iPAQ h5455

Problem getting a wireless connection to HP iPAQ h5455.  This unit is small hand held device simlar to a PDA.  I has both wireless and bluetooth access.
I get a connection to the modem but I can not connect to the internet.
I have verified the connection by ping and using the information provided on one of the h5455 status page.
I believe the problem I can not find anywhere to enter in my user id and password to get access to my dsl account.
Do I really need to enter in my user id and password to make a connection for the internet?
I have 3 other computer in my home network, 2 hardwired and 1 wireless.  All of them can connect and go online with no problems.

#1 What is the brand and model of your router?
#2 What is the brand and model of your modem?
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Similar Messages

  • Problem getting a wireless connection to work

    Well after some enormous help from ArchForum - i managed to get my new laptop's netcard running.
    Its a IBM X60S with the intel Chipset. but not I'm trying to get connection to my networks around me - But It will not work.
    Normally i have used the KDE WIFImanager to do this - But now its just blinks off on constantly - súddenly its gonbe and then its back - I have ONCE been able to connect to the network - But didn' t get an IP adress.
    So since is gonna to be my work computer - I would really like to get this working as quicly as possible but I do not know how - and cannot see the problem. So here I go. I using IPW3945 and added it to rc.conf Modules= IPW3945 - and daemons IPW3945d (But should this evt. be before or after network
    I didn' t have anything else speciel in the rc.conf and can scan and find my network - but not able to connect to it or anything ...
    lo="lo 127.0.0.1"
    eth0="dhcp"
    eth2="dhcp"
    INTERFACES=(lo eth0 eth2)
    But not what so ever normally I hvae and 128bWEP crypt on the network - BUT do an iwlist eth2 keys shows only 40 & 104bits?? Isn't it strange??
    eth2      2 key sizes : 40, 104bits
              4 keys available :
                    [1]: 9096-4A0E-3965-137A-CACB-DEC6-9D (104 bits)
                    [2]: off
                    [3]: off
                    [4]: off
              Current Transmit Key: [1]
              Security mode:open
    the funny thing in dmesg:
    ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
    ieee80211_crypt: registered algorithm 'WEP'
    ADDRCONF(NETDEV_UP): eth2: link is not ready
    ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
    ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
    ipw3945: Microcode SW error detected.  Restarting.
    ipw3945: Error Reply type 0x0000003A cmd RX_ON_ASSOC (0x11) seq 0x040B ser 0x00000000
    ipw3945: Error sending LEDS_CMD: time out after 500ms.
    ipw3945: Can't stop Rx DMA.
    ADDRCONF(NETDEV_UP): eth2: link is not ready
    ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
    ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
    The funny part - i'm sitting with a IBM R51 rigth next to and all works fine here - and the signal is ultimativ and no problem getting an IPadress or anything.
    EDIT: I have now several times getting connected to the network - but not at any times been able to get an IPaddress - even though both machines have the same setup - and should get the IPaddress from the router. The old IBM gets it - but not the X60s.
    It seems like the asking for the DHCP - don't get on at all - In the routers log I cannot see if the card is asking for an IP - And should mean that it happend all the way.
    Hopefully someone can help me further on with this ??? So than I'm able to cone further with this machine

    Well -
    Is there difference between some off the networks ??
    I mean in my Router thereś 3 options:
    64 - 128 -256 Bits crypto
    But with IPW3945 there only 2 :
    40 - 104 Bits.
    So whats the difference and can you make something difference ? and is it possible to connect in other way to the accesspoints.
    Normally on each and every else IBM i have used IPW2200 and works just normally with kde WIFI manager.
    The only way i can connet to the accesspoint is without any WEP and with an static IP ???
    This cannot be the way!!!!

  • I've got a problem getting my PC connected to the Pinnacl...

    I've got a problem getting my PC connected to the Pinnacle Showcenter!
    Situation:
    * Windows XP sp2
    * Panda IS 2008 (disabled when trying to get connection)
    * Welk Lynksys WRT54GL
    * DHCP enabled (192.168.1.100 - 192.168.1.180)
    * PC wired connection to router
    * Pinnacle Showcenter 250 (I entered a static IP address 192.168.1.150 Subnet 255.255.255.0) wired connection to router.
    I can't connect the Pinnacle Showcenter to my PC (Windows Mediaplayer 11) through the router when using a CAT5 cable. (I managed to get a wireless connection!)
    As a rookie I mus be missing some settings but I've got no idea what. Gateway settings? DNS? Subnetmask?
    Every little help is welcome.
    Regards
    Marc

    On Pinnacle Showcenter use static Ip 192.168.150...subnet mask 255.255.255.0...with gateway 192.168.1.1 ...
     From the status page of router .... use DNS numbers on the same ...
    Check if you are able to connect to the application or not ...

  • Equium L300: cannot get a wireless connection

    Hi all
    I purchased an Equium L300 PSLB2E and cannot get a wireless connection. I have checked the network adapters and it tells me the Realtek RTL8102E Family PCI-E Fast Ethernet NIC ( NDIS 6.0 ) is working.
    I have tried the FN+F8 but do not get any symbol for Wi Fi.
    I have the Wireless switch to the fornt of the unit switched on.
    Any help much appreciated.

    Try again!
    If the WLan card (device) will not appear in the Network adapters then you should take your Recovery DVD and should set the notebook back to the factory settings.
    By the way; there is a Toshiba tool called *WPS Library*.
    The WPS Library is needed for using ConfigFree and wireless connection.
    Try to reinstall it too.
    Good luck

  • New Netgear Router and now I can't get a wireless connection for my K5400 printer.

    I got a new Netgear Router and now I can't get a wireless connection on my Officejet Pro K5400 printer. Anyone know what I can do to fix this. Using Windows XP

    On the printer: Setup > Network > Restore Defaults.  From the same Network menu, run the Wireless Setup Wizard.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • E4200 - constantly getting drop wireless connection

    First, if you only plan on using the ports on the back for network connections, I have had no problems. My issues are all deal with the wireless connections. I am constantly getting dropped and when I called Cisco/Linksys support, I was told that I needed to turn off my wireless N and have all the devices connect at a slower speed.

    First of all please verify that you have got a 802.11n card in your computer. New generation routers (i.e. E4200) speaks an entirely different language than 802.11g cards, so while those adapters can work with the E4200 for example, they are not optimized to work with it. It is like having to translate from one language to another in real time when going from N to G... So in those cases the old router will show a stronger signal than the new one.
    SECOND, make sure the adapter driver is up to date.
    Try to do the following steps:
    A] With the help of Cisco Connect Software (if at all you have installed the router with the help of this software)
              1] Open the software and go to the option which says "Router Settings"
              2] Then click on the option which says "Advanced Settings" which will take you to the router's configuration page.
             3] Then go to the Wireless tab, keep network mode as mixed,
     For Channel Settings of 2.4 GHz you can make Channel Width to 20 MHz only and Channel to 6, 9, 11..
     For Channel Settings of 5 GHz you can make Channel Width to 20 MHz only and Channel to 40 or 161...
    B] If you haven't installed Cisco Connect then you can log on to the router's user interface using it's default IP address in the browser which is 192.168.1.1 and type in 'admin' as the password leaving the username field blank. This will take you to the router's web interface and then follow steps as mentioned above to make the changes.

  • Wireless Connection with HP iPAQ 5450

    Hi,
    Someone please help me to establish a wireless connection between an existing wireless airport network with my h5450 iPAQ.
    Thank you.

    See if the great instructions from iFelix help:
    http://www.efelix.co.uk/tech/2006.html

  • Problems with Macbook wireless connection to Airport Extreme

    I have been experiencing an issue with setting up and connecting my Macbook (new in April 08 and running OS X 10.5.5) and a new Airport Extreme purchased a few days ago. Essentially the Macbook struggles to connect wirelessly, or even to recognise the airport extreme. When connected directly using an Ethernet cable their are no problems (this is ultimately how I configured the airport extreme). The airport extreme wireless connection works faultlessly with my 3G iPhone and the Macbook seems to connect fine to other wireless networks. Anyone got any ideas / suggestions?

    It sounds like we may have similar problems. I have a new MacBook Pro and I just bought a new AEBS 802.11n. It shows up intermittently on the MacBook available networks and I can only occasionally configure it using the airport utility, but then it fails to connect after that and I have to reset the AEBS and start over. Curiously, the AEBS shows up consistently on my iPhone, so I think this is a problem on the MacBook side. Unfortunately I can't configure the AEBS via the iPhone (at least I don't think I can).
    Any suggestions would be greatly appreciated.
    Thanks

  • 10.4.8 problems getting FCP to connect to camera

    Is there anybody running FCP 4.5 who is experiencing problems getting FCP to see the external device connected through firewire. My computer sees my camera connected, but when I open FCP, it cannot connect to my device. I never had this problem until I updated to the new OS via the "upgrade" option. Anybody have any suggestions? The new OS also messed up my DVD Studio pro 2 app, and I had to delete some files following an article on apple support to get it to work.
    G5 power pc dual 1.8ghz Mac OS X (10.4.8)
    G5 power pc dual 1.8ghz   Mac OS X (10.4.9)  

    Usually a QuickTime receipts issue:
    http://docs.info.apple.com/article.html?artnum=301852

  • My antenna signal is very weak and I have the iOS 6.1 I CAN´T GET THE WIRELESS CONNECTION

    my antenna signal is very weak and I have the iOS 6.1 I CAN´T GET THE WIRELESS CONNECTION

    Try a reset:
    Hold the Sleep and Home button down until you see the Apple logo.

  • Help, I'm clueless, what do I need to get a wireless connection?

    I've got an i-book G4 with an Airport Extreme card built in. I want to use my computer in another room. What do I need to buy? Any particular brand that works well with Macs? Do I need new software?
    I really don't have a clue where to start!
    Please help
    Sarah

    Sarah, Welcome to the discussion area!
    Do you connect to the internet via an Ethernet broadband connection? If so you simply need any 802.11b or 802.11g compliant wireless base station.
    You would connect your base station to your Ethernet broadband connection and then wirelessly connect with your iBook.

  • How to get a Wireless connection from house to car...

    Hi I have a new BT Broadband hub in my house, I want to be able to use the wifi from this in a caravan in my garden about 30 metres away so a tablet can be used in there. Does anyone know how I can do this? the walls in the house are 2ft thick so unless I hang the router out of a window in a plastic bag I cannot get a wifi connection in the caravan.
    thanks
    Quembers

    The BT Shop have some solutions.
    http://www.shop.bt.com/learnmore/bt-branded-produc​ts-and-services/bt-connectivity-devices/
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Cannot get the wireless connection to work on mx459

    I have tried for hours to set up the wireless connection.  I even did the usb connect method.  I enter the ip manually and it won't detect it....just keeps me looping to the detect ip automatically or use the network connections it detects.   I tried the wps button on the router, printer doesn't find it.  I can detect my network thru the lan settings on the printer, but my other computer just doesn't pick it up.   Have tried everything suggested and that i could come up with, but im out of ideas at this point....any suggestions?

    Sorry, i am trying to connect to it from an acer desktop running windows 8.  athlon II x2 215 dual core processor.  the router is a westell wireless router.   

  • Having a problem getting an internet connection through WRT54G at school

    I recently purchased a WRT54G router to try and set up a wireless network within my dorm. The internet connection is already being provided by the school itself and comes to me through a box that provides the internet/phone line/and cable. The problem I am having is getting the connection to go through my router. When I plug the router into the unit that is giving my computer the connection currently the router recognizes some sort of connection because the "Internet" light is on. I can't follow the directions of installation exactly because I don't have the actual modem in my room. Any suggestions on how to remedy this problem are welcome.

    hi ,
    if your computer is connected to linksys router through the wire in that case what u can do is ..
    you can swich off your modem and linksys router ...after that swich on only your mode and than wait for the lights to get stable once the lights are stable than swich on the linksys router ..and this should fix your issue
    or
    if you are connecting to the linksys router wirelessly than connect any of your computer to the linksys router through wire and than on your computer open a internet page and in the address bar type 192.168.1.1 you will get the linksys setup page make the wireless settings and than seacrch for the wireless network on the othe wireless laptop you should find your network than try connecting to that network once u r connected to that network u will be able to go online ..
    if still the issue remains same let me know  u r network setup
    (Mod Note: Removed Email address.)
    Message Edited by daikunzeon on 08-30-2007 12:50 PM
    Rajiv Kumar

  • Can't get a wireless connection on a T43 when using Access Connection​s

    This week I had to set up a laptop for one of the partners of our firm.  Since I can no longer use System Update to get all the lenovo apps I had to download everything from the website.  Everything seemed to be going fine until I noticed that the wireless card wasn't connecting through Access connections.   It only works through Windows connection utility I have the latest version of Access Connections and the correct driver for the wireless card but it just won't work.  I remember that when system update was up and running I could download a seperate driver from lenovo that would make the wireless card work with Access Connections.  Unfortunately, I can't find it on the website.  Can anyone help me?

    Hello eaglesfan20, welcome to Lenovo forums!
    Please tell us your system type, OS and used AC version.
    Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
    Please insert your type, model (not S/N) number and used OS in your posts.
    I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
    TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
     English Community       Deutsche Community       Comunidad en Español

Maybe you are looking for