Problem Getting Error Code and Description in Alerts

We are having trouble getting the Error code and Error description in the Alerts and we're having trouble getting a alert for message mapping exceptions.  I have read through the BLOGs and the help on SAP.  I'm not sure it is something to do with the configuration or SP14.  We did not have these problems with SP12 at our other customer XI implementations.
Background -
We have setup an "XI Alert" classification with three Alert categories -"XI_Mapping_Error", "XI_Adapter_Error", "XI_Runtime_Error". 
For the "XI_Mapping_Error" alert category, we have setup a rule so that any Integration Engine Application Mapping.* Error code will create an alert.  However, when we have a mapping error in XI which we can see in MONI, we do not get an alert.  The checkbox for "Suppress Multiple Alerts of this Rule" is not selected.  I am not sure why we're not getting the alert.
For the "XI_Adapter_Error" alert category, we have setup a rule so that any Adapter Engine * adapter type will create an alert.  The alert gets created - however, some of the container variables do not get poulated in the email.  We have defined Container variables pointing to the corresponding ABAP data dictionary elements - i have double checked these definitions.
Here is an alert email - the Error Code (SXMS_ERROR_CODE -  SXMSERRTX) and Error Category (SXMS_ERROR_CAT - SXMSERRCAT) are not being extracted:
Alert ID: ##23896##
Error Code =
Error Category =
Message ID = 1506eab0-6125-11da-9ba2-00505685 Time = 14:26:12 Date = 29.11.2005
Sender Party =
Sender Service = BS_CPI
Sender Interface = MI_CPI_INV_RFC_REQ_ABS
Receiver Party =
Receiver Service = BS_CPI
Receiver Interface =
We are not able to figure out why the Alert framework is not working correctly.  We are running XI 3.0 SP 14 on Win2K, SQL 2000.
Anyone encounter these problems?  Any help would be appreciated.
Regards,
Jay Malla

>> There are some problems with SP 14 and the alert framework.
Very true! Join the team!
>> We applied Note 876546 which triggered certain alerts that were not getting triggered. However, we're not getting the Error code and Error Description in some of the alerts.
Jay, This note is specifically for a situation where the 'where did the error occur' set to No Restriction. I don't think anything else is included in this fix .01 to patch 0.9 of SPS 12 of XI 3.0!!!
My problem is that even the messageID variable is not getting replaced!!! In SP12 everything was perfect. After SP14, the errors are coming almost instantaneously to the inbox, but without any variable replacement.
Best of luck,
Kannan

Similar Messages

  • Oracle error code and description

    Gurus,
    Is there a distinct list of oracle error code with description(in excel or txt,csv format) , the requirement is to convert most of generic oracle messages into user defined messages and store it in a XML.
    Regards
    R
    Edited by: Darthvader-647181 on Aug 11, 2010 8:00 AM

    HareeshGhanta wrote:
    Hi,
    Thank you.I am looking for some additional information like Cause and Action also to be printed out.Is there any way we can achieve this.
    Regards
    Sounds like you are trying to re-invent the wheel.
    What's wrong with the message text as supplied by oracle?  Those messages are universally known and understood -- well, at least by people who actually read them vs. simply dumping them to a forum.  Why would you want to obfuscate them with your own text?
    As for "cause and action", if one has the error code emitted by oracle, there are boat load of web sites that already replicate the same information that oracle itself supplies:
    oracle:dwdev$ oerr ora 12154
    12154, 00000, "TNS:could not resolve the connect identifier specified"
    // *Cause:  A connection to a database or other service was requested using
    // a connect identifier, and the connect identifier specified could not
    // be resolved into a connect descriptor using one of the naming methods
    // configured. For example, if the type of connect identifier used was a
    // net service name then the net service name could not be found in a
    // naming method repository, or the repository could not be
    // located or reached.
    // *Action:
    //   - If you are using local naming (TNSNAMES.ORA file):
    //      - Make sure that "TNSNAMES" is listed as one of the values of the
    //        NAMES.DIRECTORY_PATH parameter in the Oracle Net profile
    //        (SQLNET.ORA)
    //      - Verify that a TNSNAMES.ORA file exists and is in the proper
    //        directory and is accessible.
    //      - Check that the net service name used as the connect identifier
    //        exists in the TNSNAMES.ORA file.
    //      - Make sure there are no syntax errors anywhere in the TNSNAMES.ORA
    //        file.  Look for unmatched parentheses or stray characters. Errors
    //        in a TNSNAMES.ORA file may make it unusable.
    //   - If you are using directory naming:
    //      - Verify that "LDAP" is listed as one of the values of the
    //        NAMES.DIRETORY_PATH parameter in the Oracle Net profile
    //        (SQLNET.ORA).
    //      - Verify that the LDAP directory server is up and that it is
    //        accessible.
    //      - Verify that the net service name or database name used as the
    //        connect identifier is configured in the directory.
    //      - Verify that the default context being used is correct by
    //        specifying a fully qualified net service name or a full LDAP DN
    //        as the connect identifier
    //   - If you are using easy connect naming:
    //      - Verify that "EZCONNECT" is listed as one of the values of the
    //        NAMES.DIRETORY_PATH parameter in the Oracle Net profile
    //        (SQLNET.ORA).
    //      - Make sure the host, port and service name specified
    //        are correct.
    //      - Try enclosing the connect identifier in quote marks.
    //   See the Oracle Net Services Administrators Guide or the Oracle
    //   operating system specific guide for more information on naming.

  • Sign In Problem, Get error code 400

    I get the same error from Photoshop & PE 10. I also get the same error on 2 different PC's. I can log into Adobe ok as long as I go to Adobe.com. I have no photo's out there but I need to sign in using the Adobe PE 10 sign in to get better Themes & become a plus member. I reinstalled PE 10 today but that did not help.

    Hi,
    That service ceased months ago so there is nothing to sign in to.
    http://barbarabrundage.com/2013/09/16/pse-8-9-10-cant-sign-in-error-404/
    Brian

  • When I try to sign into photoshop elements I keep getting error code 400 connection error. I am connected to wifi and have no connection problems anywhere else. How do I fix this?

    When I try to sign into photoshop elements I keep getting error code 400 connection error. I am connected to wifi and have no connection problems anywhere else. How do I fix this?

    FRANK M
    What computer operating system is your Premiere Elements 9 running on? I will assume Windows 7, 8, or 8.1 64 bit for now.
    As for the Help Menu/Update way for updating, are you doing that with antivirus and firewall(s) disabled? If not, please do so.
    Do you have the 9.0.1 Update of the program installed? What version of Camera Raw do you have installed?
    Premiere Elements 9 is an older program where you can still do manual installs for that one and only Update. And, Camera Raw for 9 is no longer being updated.
    For the 9.0.1 Update
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4929
    Camera Raw (last update possible for 9) is 6.5
    Camera Raw-compatible Adobe applications
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.5 update
    Please review and consider the above, and then let us know the outcome.
    Thank you.
    ATR

  • In the past, I have had no problem copying from a network HDD to my Mac.  Recently, I cannot copy and get error code 8084.  Any thoughts?

    I cannot copy from my network drive to my iMac; I get error code 8084.  I can copy the same material from my network drive to my PC.  In the past, I have had no troubl copying to my iMac. What happened-going from OS 10.6.7 to 10.6.8?

    Thread bump.

  • Hi, I got my Mac in 2009 with photoshop elements on it - it's recently been wiped, however before the process we put Photoshpp onto a hard drive, we then copied it back over and it no longer works, I'm getting error code 150:30 and I'm being asked for a p

    Hi, I got my Mac in 2009 with photoshop elements on it - it's recently been wiped, however before the process we put Photoshop onto a hard drive, we then copied it back over and it no longer works, I'm getting error code 150:30 and I'm being asked for a password... any ideas how to get it working again?

    You can never, never migrate an installed copy of PSE. It's just too complex and you can't get to all the bits and bobs.
    First you will have to download and run this:
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    which will not seem to do anything, but is necessary to break the links within PSE so that you can pitch the bits manually. Then you will have to go around, not only to applications, but also to your username>library>preferences and most importantly to the library at the top level of your hard drive>application support>adobe, and remove everything you can find. Spotlight will not help with this kind of search, so don't try that.
    Then you can install PSE from scratch.

  • I am trying to re-install Creative Suite 5.5 Design Standard on my Widows 7 Professional computer after I had to replace the hard drive. I keep getting error message and I get "Exit Code 15: Media DB Sync failed". I have run C Cleaner with same results. H

    I am trying to re-install Creative Suite 5.5 Design Standard on my Widows 7 Professional computer after I had to replace the hard drive. I keep getting error message and I get "Exit Code 15: Media DB Sync failed". I have run C Cleaner with same results. Have Disabled UAC and Startup items and Services with no success. Please help - frustrated to no end. Can someone help me?

    make sure you're using the adobe cleaner, not crap cleaner, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    copy the installation files to a desktop folder and install from there.

  • HT201210 I have an old i phone 3G and do not know the password for it. trying to restore it from itunes but keep getting error code 1015, any help on how to get passed this please?

    I have an old i phone 3G and do not know the password for it. trying to restore it from itunes so my daughter can use it as an ipod but keep getting error code 1015, any help on how to get passed this please?

    Hi ratcat14!
    I have an article that can help you troubleshoot this issue:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • All my Album artwork has gone missing and I get error code (-609)??

    All my Album artwork has gone missing and I get error code (-609)??

    Hi mallymoon20,
    If you are having an issue with Album Artwork and error -609, you may find the following article helpful (under Specific Conditions and Alert Messages):
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Regards,
    - Brenden

  • TS4522 What is the problem when I get error code 0 when trying to burn a DVD.  It stops around 60-some %.

    I have tried twice to burn a DVD, and both times I get error code 0 at about 60-some % of the transcoding.  I haven't had any trouble burning DVDs before now.

    I had a friend with similar problem, not sure of cause. Happened when sharing to Apple device as well.
    Apple said to delete all files in Render folder. We did not try that as-
    Problem changed slightly for us, in that Share to 'Apple device 720' got to 50% and pretended to have completed its operation, but no file found in Project Share folder.
    We found then, if the timeline clips where highlighted it would share, where previously it had repeatedly failed.
    Hope that helps

  • TS3212 I uninstalled iTunes because I have not bben able to update it or my iphone. I was told the program was infected. I am reinsatlling and getting error code 2203. Any ideas?

    I uninstalled my iTunes because it would not update and I have not been able to update my phone. I was told my program was infected and to uninstall and then reinstall it. I am now getting error code 2203 when I try to reinstall it. This is the second time trying to reinstall. The first time it was reinstalled with the same problems I orginally had. I am running Windows 7. Any ideas? Thanks for any help.

    Or....
    For Mac OS X:
    Step 1. Go to your “Applications” folder
    Step 2. Go to your “Utilities” folder
    Step 3. Launch “Terminal”
    Step 4. Type “sudo nano /etc/hosts” (without quotes) and hit return
    Step 5. Enter your password
    Step 6. Use the down arrow key to find the “gs.apple.com” entries. Once the cursor is in front, make sure you comment out the line(s) by entering “#” (no quotes) in front of the text
    Step 7. Save the file by pressing CONTROL+O on the keyboard
    Step 8. Exit the nano editor by pressing CONTROL+X on the keyboard
    Step 9. Restore your iDevice
    Try that

  • I get error code 5002 when try to buy John Goodwin tune, but no problem with buying other titles

    I get error code 5002 when trying to purchase any titles from John Goodwin "She Lay Her Whip Down." I can buy other songs but not this. Benn trying for days.  What is this code? I just want to buy a song.

    Hi
    Error -50 paramErr  Error in user parameter list
    Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
    UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
    What this means in Your situation is above me.
    • free space on internal boot hard disk? How much ?
    Video codec
    • streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
    Pictures
    • in what format ? .jpg, .bmp, .tif, else ?
    Audio
    • from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
    The "com.apple.iMovie.plist" file
    Many users has not observed that there are TWO libraries.
    • Library - at root level
    • Library - in user/account folder - THIS IS THE ONE to look into
    from Luke Burns
    I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
    I don't know why that could cause that big of a problem, but it did..
    Klaus1
    You need more free space on your hard drive.
    jonorparkerjon
    After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
    Where do Your material come from
    • Camera
    • External hard disk
    • USB-memory
    And all are connected so that iMovie can find it ?
    Yours Bengt W

  • I keep getting error code 4450 when I'm trying to burn a CD from itunes.  It keeps my CD and won't eject it and says "cancelling burn" forever then itunes locks up and my cd is ruined and NO songs on it.

    i can't burn cd's in iTunes anymore. I get error code 4450 when I'm trying to burn a playlist. Songs from my own cd's, or bought in iTunes (have not burned 7x's as I can't BURN any cd's at all!),  Then my cd gets stuck in the drive. and it says "cancelling burn" forever and then itunes freezes up. I have a Dell with Windows 7.
    -I've slowed down the burn as slow as it can go
    -I have bought 3 different brands of cd's
    -i have the latest version of iTunes.
    Can someone help me?

    I have Windows 7 on a Dell.  Open and play iTunes in the compatability mode and use Windows XP (service pack 2).  Disregard any messsages to disable the compability mode.  This has worked for me.  I have also reinstalled iTunes and played with burn speeds etc.  These ideas did not work.  Compatability mode works.

  • I previously downloaded the AI 30 day trial but was able to use it before the trial ran out I've since deleted it from my laptop (Windows 7 64 bit OS) How do I get it back? Trying to download AI again and getting error code 3 some thing to do with adminis

    I previously downloaded the AI 30 day trial but was able to use it before the trial ran out I've since deleted it from my laptop (Windows 7 64 bit OS) How do I get it back? Trying to download AI again and getting error code 3 some thing to do with administration permissions?

    If your intention is to use the trial again it will not reset if you reinstall.  It will remain in its ran out state.

  • Trying to register with ePrint and getting error code.Ajax submit failed: error = 403, Forbidden.

    Trying to register with ePrint and getting error code.Ajax submit failed: error = 403, Forbidden. I need help??

    To bypass this error attempt either a restart of your computer, or use an alernate broser such as firefox or chrome. If you already have another browser the latter may be the easier fix.
    Jon-W
    I work on behalf of HP
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    Click the KUDOS STAR on the left to say “Thanks” for helping!

Maybe you are looking for