Problem getting images in ePub to appear correctly for Nook

I have been working on a book that is about 250 pages long in print format, with about 350 photographs that illustrate the text, which is a guide to the use of a particular digital camera model. After watching Anne-Marie Concepcion's course at Lynda.com and also using the book by Sandee Cohen and Diane Burns, Digital Publishing with Adobe InDesign CC, I was able to export the book successfully in ePub and mobi formats. The ePub looks fine in iBooks and the mobi looks fine in the Kindle apps. But I have not been able to get the images to appear properly when I preview the ePub for the Nook. I have tried every combination of export and conversion settings I could think of, but the images either look too large and distorted as if squeezed, or, if I use the CSS Size-Fixed option, the images look tiny, much too small to see details (though they will expand if clicked on). I eventually uploaded it through Nookpress.com to see if their conversion would help, but the book recently went on sale there, and when I downloaded it to check, the images did not appear at all. The same thing happens when I use the Preview function at the nookpress.com site; the screen shows broken link icons for all images.
I cannot think of anything else to do. Can anyone provide me with any suggestions for how to proceed, short of hiring an expert? Most of the images are 1800 pixels wide and roughly 1200 pixels tall in the InDesign document, with a resolution of 600 ppi. As noted above, I have tried all different combinations of the Use Existing Image for Graphic Objects, Preserve Appearance from Layout, CSS Size-Fixed, CSS Size Relative to Text Flow, and others, with no success. Any help would be greatly appreciated!
Here is a link to a Dropbox folder that has the file I uploaded to Nook Press. In this one, the images don't show up all: Dropbox - Panasonic Lumix LX100 Version for Nook

Okay, thanks. That was helpful. I ran the file though Epubcheck and it did find various errors. I have replaced that file with another file that does not result in errors, but does generate a lot of warnings, all about having image file names with spaces in them. I'm assuming that's not what is causing the problem with the way the images display. The file that is in the Dropbox folder now is one that does show the images, but they appear distorted and too large when viewed on the Nook app on my Nexus tablet, but they look fine when viewed in iBooks on my Mac. Dropbox - Panasonic Lumix LX100 Version for Nook I'm hoping there is some general information available about how to format images in an ePub so they will display properly on the Nook.

Similar Messages

Help with indesign epub not appearing correctly on ipad

Can someone please tell me why my epub does not appear correctly when viewed on my ipad? It seems to push like a quarter of my full page image onto the next page. I don't want it to do this! I want it to looks like it does in ibooks on my mac.
See the links to below images that show how it looks on indesign, ibooks and ipad.
https://www.flickr.com/photos/118558552@N02/15536244571"
"https://www.flickr.com/photos/118558552@N02/15352308439"
https://www.flickr.com/photos/118558552@N02/15538941145"
Thankyou for looking, and I hope someone can answer!

Check this thread regarding the same issue and see if some of the suggestions there help you: IMAGES cut off when converting to epub

Problems getting images to export down to 200kb limit for posting on websites

websites often have a size limit that they can accept when you download an image. For example BPN's forum has a 200KB limit. Since 3.3, I often have problems getting an export from a Canon raw file or DNG down to that size. I get an error message indicating that it cannot create an image that size. Never had the problem on 3.2. (note I can export to email but that is a very small file and I would like files closer to 200KB and within the 1000 x 800 pixels to be downloaded)...thoughts?

I too recently had major problems using filesize limit. I pretty-much never use it m'self, so its a dont-care to me personally, but my conclusion was: its broken.
PS - I did not scrutinize for a long time... - just got a lot of "can not make image" errors when I believed I should not have gotten those errors.
I'd suggest a good scrutinizing followed by an official bug report.
Honestly, I think controlling quality is a better solution, whenever possible (unless you have constraints imposed by an external agency...) The reason: not all photos need the same amount of bits to look decent. So, in general its better to have some photos take more while others take less, and have the average filesize be limited, not individual filesizes.
R

How do I get images from Aperture into print shop for mac?

Friends,
I have Print Shop for Mac and Aperture. How do I get images from Aperture into Print Shop? I'musing managed images with previews. Is there any option besides exporting to the desktop and importing?
Thanks!
Steve

if you have previews turned on in Aperture and they're all genereated, you can simply drag-n-drop them into any application (just about). drag-n-drop is essentially the same as copy/paste as long as the application is setup to accept "drops" onto its windows.
otherwise, if you're running Leopard (10.5) as your version of Mac OS X, when you import (or whatever it is in PrintShop), you should get a file selection dialog. from here, scroll down the left-hand side bar set of icons. near the bottom is a group called "Media". click on the triangle to open the group, choose Photos, and from here you should see an Aperture icon. click this and you'll see your whole library (or at least the portion of it that you have previews generated for. select the photo you want and viola!
scott

Hi there. Having some problems getting my calender to show the correct days for birthdays I have in my contacts. If the correct date in contacts is the 22nd, then in iCal it appears on the 21st. Has happened on 3 occasions. All have been in the 20's ??

Hi there,
Having an issue where some birthday dates in my contacts appear as a different date in my iCal. One day before infact. Most are fine but three are incorrect. Seems to be all involving dates in the 20's. Have tried editing contacts but to no avail. Have read about syncing but because most are correct I am not sure about this. Very perplexed! The contacts dates are all correct.
Thanks for any advice.

Hi there,
Having an issue where some birthday dates in my contacts appear as a different date in my iCal. One day before infact. Most are fine but three are incorrect. Seems to be all involving dates in the 20's. Have tried editing contacts but to no avail. Have read about syncing but because most are correct I am not sure about this. Very perplexed! The contacts dates are all correct.
Thanks for any advice.

How do I get ACaslon and AGaramond to appear correctly in the Font Menu?

Working on a PC, ACaslon and AGaramond (opentype) appear on the font list separate from their Bold/SemiBold counterparts. I have read the release info and understand this is not a unique issue, but this quirk hampers usability. I'd like to be able to select "Bold" and for the Regular/Roman to then appear with the actual Bold version of the font, not the "Fake Bold" created by MS Word. It is too tedious to go back and change every word I want to be Bold by actually changing the font to ACaslon/AGaramond Bold. Is there a way to fix this so that when I select ACaslon/AGaramond, I can simply hit Ctrl + B and get the "True Bold"? Thank you!

There is no such “fix” available unless you were to modify the fonts themselves, which we would stronly urge against.
The issue is one of taste and design as well as the limitations of how Windows GDI applications (i.e., not graphic arts software such as Adobe Creative Suite applications) deal with fonts.
The designers of these particular fonts believe that the semibold style faces are more appropriate for bolding from the regular style faces than the bold style faces.
- Dov

I have a MAC running 10.6. I cant get firefox to connect to the internet unless I first open Safari and connect. Firefox works fine after that. This is a new problem on my machine How do I correct for this?

When I boot my Mac (Snowleapord 10.6) and attempt to start Firefox, the system alerts me that it cannot find the internet and requests that I try again. It is not until I start Safari, establish a connection that I can get firefox to work. This is a new problem. Until recently, things worked fine. How do I resolve this issue?

Same proble here, although the Firefox system requirements says it is OK to have PowerPC G3 G4 or G5 ( I have G5 2GHZ)
My solution; very simply use timemachine to restore the previous Frefox 3.x
worked great in 3 mns

Problem getting 16:9 content to play correctly on 4:3 TV

I've searched the forums for this problem, but I haven't been able to find anything. I apologize if this has been asked before.
I recorded video with my MiniDV camcorder in 16:9 and I imported it into iMovieHD as DV Widescreen. When I play back the DVD on a widescreen monitor, it plays great, but when I play it on a 4:3 screen, it stretches the image. I would like the video to playback on a 4:3 TV with letterboxing.
Is there a way to burn 16:9 video content so that it plays fullscreen on a widescreen TV and letterboxed on a 4:3, or do I need to burn separate DVDs?
Thanks for your help,
Brandon

Hi Brandon,
Check out this: http://docs.info.apple.com/article.html?artnum=301840

Problems getting vCAC 6.2 to work correctly. Security related.

Hi Everyone,
I am setting up a quick n dirty VCAC 6.2 test lab and am hitting a problem that has been annoying me for a good few days and I hope someone can help. To give a bit of background I did the following to set up the infrastructure (above and beyond having a working vCenter 6 installation)
Installed a SQL 2014 standalone box and IAAS box using Window 2012 R2
Installed the authentication appliance.
Installed the VRA appliance from OVF
Installed the Orchestrator appliance
All were installed from latest available on VMwares website. I then installed the pre req script to configure the IAAS pre reqs. Then installation went through ok (Although it took a while ) The problem is when I come to login I keep getting errors about connection broken/resets.
Looking in the IAAS event viewer I get the following error:
An TLS 1.2 connection request was received from a remote client application, but none of the cipher suites supported by the client application are supported by the server. The SSL connection request has failed.
I understand that the issue is more or less related to the fact that the encryption type is not supported. So my question is.. What is the easy and straight forward to fix this ? Crypto functions are not my forte!
Regards
Stuart

Hi,
I also have a rt73 chip - edimax EW-7318UG.
I used this package from aur :
http://aur.archlinux.org/packages.php?d … s=0&SeB=nd
and now I have the module. Maybe it will work for you as well.
My problem seems to be setting up the interface. I can set it up to run manually - using ifconfig and iwconfig but it seems I can't load the network on startup. I keep getting this response form the startup network script :
Error for wireless request "Set Mode" (8B06) :
SET failed on device rausb0 ; Network is down.
I have to run manually each time :
[root@fort etc]# ifconfig rausb0 up
[root@fort etc]# iwconfig rausb0 essid mikahome
[root@fort etc]# dhcpcd rausb0
Anyone knows if this can be automated?

Getting error message after trying to correct for blank folio builder

This is my first app using IDCC6. I opened the folio builder from the document, gave a name to the article that consisted of 12 picture panels (about 12mg) and tried to review on desktop but just got a blank folio builder screen. Then I updated to cc28 viewer, reset the ID prefs and restarted. Then I got an error message
that said: "article <name> is not compatible with the viewer for which the folio is being published."
Can someone tell me what I'm doing wrong here, other than perhaps being in the wrong forum. If so, pls let me know where i should post. I'm somewhat confused about naming articles. If that's the problem, I'd like to go into it...cheers all
mac pro OS 10,5,8

It's a good idea to check the Project Info (under the Project menu in iDVD) before burning a disc. If any of the Duration bars are in the red, then you need to go back and edit your project. Also check the Encoding type with your total Project Duration: if the project total is under 60 minutes choose "Best Performance;" if it is between 60 and 120 minutes you'll need to select "Best Quality."
Unless you have freed a lot of GB on your hard drive, iDVD will not be able to burn the disc. You'll need at least 15 -25 GB free on your boot drive in order for the app to do all that encoding. It takes a lot of brainwork to turn a 13+ GB movie project into a 4GB DVD file.
When your project is ready to burn, choose File > Save as Disc Image. This tells iDVD to do all the encoding, and will result in a disc image file that you can mount in your DVD Player app to see that all is well. If so, you can quickly burn the disc image with Disc Utility or an app like Toast. If not, then you haven't burned any coasters. Another advantage is that you will be able to burn duplicates of the disc image very quickly, without going through all that encoding again, should other relatives request a copy.
Regards.

How do I get the Firefox icon to appear on my menu bar instead of a question mark?

I have been using Firefox 3.7 and recently downloaded 4.0
An icon showing Firefox on what lloks like a memort stick icon appeared on my desktop. I am a Mac OSX user. When I dragged the icon to my menu bar, a question mark (?) appeared instead of the Firefox icon. How do I get the firefox icon to appear correctly on the men bar?

Welcome to the Apple Community.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

Error in FTXP -Calculation procedure not maintained correctly for level 000

Hi Guru
I am creating a new tax code A7 through trx. FTXP. It is a copy of another code A1 and only percentage needs to change for eg. from 60% to 25%.
After changing while saving i get error - 'Calculation procedure not maintained correctly for level 000 Message no. FS789'.
Could you please help me to understand why i get this error while i am only copying an existing tax code A1 and just changing the %.
Thanks
Reg
SAPasmita

Hi ,
Go to tcode OBYZ Then select procedure select the appropriate procedure defined for your company code and then select the control data in the control data tree there will be different step first step will be
step   description                              from to
100    base amont
110    rounding down output tax ,    100
120 round off input tax
then in the round down output tax in FROM column mentioned from which step the output tax be rounded an exampleis provided for better understanding.if the from is not mentioned the error will appear

Problem with iTunes. I have Windows 8 on a new laptop. Installed latest version of iTunes. Can play music in My Library but when I click on Itunes Store I get the message "iTunes has stopped working. A problem caused the program to stop working correctly.

I have a new laptop with Windows 8 as operating system. Installed latest version of iTunes ontop computer. I can play music in My Library but when I click on iTunes, I get the message " iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify if a solution is available."
Anyone know what is the cause and if there is a resolution? Have tried to re-installing iTunes and have also tried restoring laptop to an earlier date.

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

When browsing a new library that I created, the browser shows dotted lines around grey rectangles, no images. When I double click on a rectangle the image appears. How do I get images to appear in the browser rectangles?

When browsing a new library that I created and exported onto an external hard drive, the browser shows dotted lines around grey rectangles, no images. When I double click on a rectangle, the image appears, but all the other rectangles remain empty - no image. How do I get images to appear in the browser rectangles? I am viewing this on a second computer (an older intel duo iMac), not the one I created the library on (a MacBook Pro). Both computers have Aperture 3.2.4 installed. When I return the external to the MacBook, all images appear in browser rectangles. What's happening on the iMac?

You may have a problem with the permissions on your external volume. Probably you are not the owner of your library on the second mac.
If you have not already done so, set the "Ignore Ownership on this Volume" flag on your external volume. To do this, select the volume in the Finder and use the Finder command "File > Get Info" (or ⌘I).
In the "Get Info" panel disclose the "Sharing & Permissions" brick, open the padlock, and enable the "Ignore Ownership on this Volume" flag. You will have to authentificate as administrator to do this.
Then run the "Aperture Library First Aid Tools" on this library and repair the permissions. To launch the "First Aid Tools" hold down the ⌥⌘-key combination while you double click your Aperture Library. Select "Repair Permissions" and run the repair; then repeat with "Repair Database". Do this on the omputer where you created the library and where you can see the thumbnails.
Then check, if you now are able to read the library properly on your iMac.
Regards
Léonie

FP Get Image Invoke Method Problem

I am having trouble with the Invoke Method FP Get Image (I discovered the problem by trying to use the Report Generation Toolkit -> Append Front Panel Image to Report.vi). I am trying take an image of the entire Front Panel (not just visible) and write it to a word report. I have software that did this beautifully in LV 8.2.1, but I recently upgraded it to 8.5.1 and it no longer works correctly. I have attached an image to illustrate the problem. You can see that most of the front panel exists in the image, but I have an array of XY graphs that only exists as seen on the visible front panel. I have tried explicitly setting the option to image the entire front panel with the same results. I dont understand how the other parts of the front panel (the numbers for each graph exist as a table of strings and are overlayed ontop of the graph, there is also a summary graph on the bottom left as well as some text on the bottom right; all of this shows up even though it is not on the visible front panel). If anyone has seen this or something similar I would love to hear how you handled it.
Thanks!
Message Edited by jmcbee on 06-20-2008 12:32 PM
CLA, CLED, CTD,CPI, LabVIEW Champion
Platinum Alliance Partner
Senior Engineer
Using LV 2013, 2012
Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.
Attachments:
Word Report Page.PNG ‏85 KB

Hello. I have built a simplified version of the software that shows the problem I am having. Please feel free to take a look and make suggestions for either a fix or workaround. I have been in touch with an AE via phone support so NI knows about and is working on this problem.
Thanks!
I apologize for the double post, having some internet issues at work and I didnt think the previous post had been sent.
Message Edited by jmcbee on 06-23-2008 09:56 AM
CLA, CLED, CTD,CPI, LabVIEW Champion
Platinum Alliance Partner
Senior Engineer
Using LV 2013, 2012
Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.
Attachments:
FP Get Image Invoke Method Bug1.vi ‏56 KB

Problem getting images in ePub to appear correctly for Nook

Similar Messages

Maybe you are looking for