Problem having the cloumn fields in the heading(REP:1317)

Hi
I am having a problem having a column field in the Header.I followed the instructions in the help i.e creating a field and then referencing it with a boiler text(&<field name>).But When I run the report I get the error message
"REP-1317: Boilerplate '<boilerplate name>' references field with source '<column name>' at wrong frequency."
How do I set these two field in the same frequency.
Can anybody help.
Thanks

Hi
See my answer at YOUR topic "Unable to have the column fields in the header".
Once more: the only way to solve the problem is to create in the Header the Repeating Frame linking with the group of "<field name>". Then it's possible to place Field to be referenced by "database_col" or boiler text such as "&<field name>".
Andrew.

Similar Messages

Problem in populating the new field from the extract structure. Kindly help

my requirement a new text field is added on R/3 side and I have to populate
the same field into BW.
In the R/3 a new customization table 'AAA' is created which will have
code - char 3 and
text - char 30.
The code field is added to a table BBB.
The SAP standard generic data source exracts data from the table BBB where in the new code field have been added.
Now I can the see the code field in the extract structure and not in the data source as the filed has selection value 'A' when checked in the ROOSFIELD table.
To populate the value in BW, I will be creating a Generic Master Data text wherein I fetch the values from the table 'AAA' which the fields code and text and replicate the same in BW.
In the reporting level, the code InfoObject will be selected as display both KEY and TeXT, by doing I can populate the values of TEXT in the reporting.
But to achieve the same I need to add the field code in the ODS but cannot do the same because I am not able to see the field code in the data source.
Kindly let me know how to achieve the same.
Also let me know if there is any alternate solution to populate the text field in BW.
Any Inputs will be appreciated.
Thanks

> You should get the userdatasources bound to the
> columns and assign the values of the recordset to
> each one and after that use "setLineData" to write in
> the matrix.
>
> hope it helps
Hi all,
i have created tables (non BO Tables) directly on the SQL-server and want to use recordset to populate a user form matrix.
Is there any workaround to achieve this using non BO tables?
Please provide some sample code since it is a very urgent matter.
regards
Daniel

Problem with displaying Date field in the table.

Hi All,
I am trying to display data into a table UI Element.
In that data, i have one DATE type field. While displaying data in DATE field, it will display like this "01.02.2009".
Now my requirement is if i want to modify that DATE field, it will allow to modify "01.02.2009" to "26.02.2009".
But while modifying DATE field , I want to show the Calender of that month, in that i have to select the another date.
(Like normal Date UI Element will show that calender).
Can anyone please help me.
Thanks in Advance!
Regards,
Sreelakshmi.

Hi,
Go to the context attribute that was mapped to the DATE field of the table and change the perperty INPUT HELP MODE to AUTOMATIC and it works.
Regards,
Manne.

LSMW - Problem while assigning the quantity field to the target structure

Hi,
Here I am getting the warning while I am maintaing the field mapping and conversion rules . Here I am doing this through the Batch input Recording.
That is , while I am assigning the source field to the target structre field .
" <b>WARNING : Source field is longer than target field</b> "
plz help me to remove that warning.
Thank you

in lsmw use char field instead quantity of same length(in stucture defined in lsmw).

Data entered in the custom field in the SRM portal not getting saved..

Hi Experts,
I have added a custom field in Contract Screen of the SRM portal by adding the field as an append structutre in structure INCL_EEW_PD_HEADER_CSF_CTR.
The custom field now appears in the header (basic data ) of the 'Process contract' screen.
NOw It allows me to enter data in the custom field .
The problem is ..
When I 'CHECK' or "RELEASE' the contract, the value entered in the custom field disappears..
How do i capture the data entered in the custom field ...please HElp!!!
Thanks in Advance.
Vidya

Hi Pradeep,
Thanks for the reply!!
We have upgraded our SRM system from 3.0 to 5.5
I have added the custom field in structures INCL_EEW_PD_HEADER_CSF_CTR and
INCL_EEW_PD_HEADER_CSF as the field has to appear in the basic data tab of 'Process Contract'.
Regarding debugging:
1. I tried to debug in BBP_DOC_CHECK_BADI by calling the FM BBP_PD_CTR_GETDETAIL. inside the badi and the parameter e_header of the function module contained the custom field but had no value...!!
2. I tried to debug the badi BBP_CUF_BADI_2 method MODIFY_INPUT..
The import variable iv_fieldname contains the field name amd the variable iv_value has the value entered in the custom field .........but another import structure ls_header also contains the custom field but no value....
Method MODIFY_INPUT has only one export parameter ev_value,,,,,,,,,,,,,,,,!!!!!!!!!!!!
Edited by: vidya vidya on Apr 24, 2009 6:06 PM

How can I get the "text" field from the actionEvent.getSource() ?

I have some sample code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.ArrayList;
public class JFrameTester{
     public static void main( String[] args ) {
          JFrame f = new JFrame("JFrame");
          f.setSize( 500, 500 );
          ArrayList < JButton > buttonsArr = new ArrayList < JButton > ();
          buttonsArr.add( new JButton( "first" ) );
          buttonsArr.add( new JButton( "second" ) );
          buttonsArr.add( new JButton( "third" ) );
          MyListener myListener = new MyListener();
          ( (JButton) buttonsArr.get( 0 ) ).addActionListener( myListener );
          ( (JButton) buttonsArr.get( 1 ) ).addActionListener( myListener );
          ( (JButton) buttonsArr.get( 2 ) ).addActionListener( myListener );
          JPanel panel = new JPanel();
          panel.add( buttonsArr.get( 0 ) );
          panel.add( buttonsArr.get( 1 ) );
          panel.add( buttonsArr.get( 2 ) );
          f.getContentPane().add( BorderLayout.CENTER, panel );
          f.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
          f.setVisible( true );
     public static class MyListener implements ActionListener{
          public MyListener() {}
          public void actionPerformed( ActionEvent e ) {
               System.out.println( "hi!! " + e.getSource() );
               // I need to know a title of the button (which was clicked)...
}The output of the code is something like this:
hi! javax.swing.JButton[,140,5,60x25,alignmentX=0.0,alignmentY=0.5,
border=javax.swing.plaf.BorderUIResource$CompoundBorderUIResource@1ebcda2d,
flags=296,maximumSize=,minimumSize=,preferredSize=,defaultIcon=,disabledIcon=,
disabledSelectedIcon=,margin=javax.swing.plaf.InsetsUIResource[top=2,left=14,bottom=2,
right=14],paintBorder=true,paintFocus=true,pressedIcon=,rolloverEnabled=true,
rolloverIcon=,rolloverSelectedIcon=,selectedIcon=,text=first,defaultCapable=true]
I need this: "first" (from this part: "text=first" of the output above).
Does anyone know how can I get the "text" field from the e.getSource() ?

System.out.println( "hi!! " + ( (JButton) e.getSource() ).getText() );I think the problem is solved..If your need is to know the text of the button, yes.
In a real-world application, no.
In a RW application, a typical need is merely to know the "logical role" of the button (i.e., the button that validates the form, regardless of whether its text is "OK" or "Save", "Go",...). Text tends to vary much more than the structure of the UI over time.
In this case you can get the source's name (+getName()+), which will be the name that you've set to the button at UI construction time. Or you can compare the source for equality with either button ( +if evt.getSource()==okButton) {...}+ ).
All in all, I think the best solution is: don't use the same ActionListener for more than one action (+i.e.+ don't add the same ActionListener to all your buttons, which leads to a big if-then-else series in your actionPerformed() ).
Eventually, if you're listening to a single button's actions, whose text change over time (e.g. "pause"/"resume" in a VCR bar), I still think it's a bad idea to rely on the text of the button - instead, this text corresponds to a logical state (resp. playing/paused), it is more maintainable to base your logic on the state - which is more resilient to the evolutions of the UI (e.g. if you happen to use 2 toggle buttons instead of one single play/pause button).

Is it possible to map the cmp fields of the entity bean with out dictionary

Dear sirs,
I have created the EJB project module and WEB Module. Now i have to map the CMP fields of the entity bean to the underlying table. Is it possible to map the cmp fields of the entity bean with out java dictionary? If yes how can we do that.
I have got some error while mapping an EJB's CMP fields to the table through dictionary. I was actually intended to map 79 fields but it gives an error that more than 64 fields are not allowed while building the dictionary.
1. Can you tell me what could be the possible reason?
2. Is it possible to map the cmp fields of the entity bean with out java dictionary? If yes how can we do that.
Kindly helo me,
Sudheesh K S

Hi,
Sudheesh please check up if the below link helps,there are other ways of writing the persistent.xml for container managed entity bean.
http://help.sap.com/saphelp_nw04s/helpdata/en/9b/f695f0c84acf46a4e0b31f69d8a9b7/frameset.htm, probably in the studio you cannot browse through tables not in the java dictionary,but manually editing it may still solve the problem.
Also here is another link that specifies the databases supported by J2EE Engine.
http://help.sap.com/saphelp_nw04s/helpdata/en/66/a5283eeb47b40be10000000a114084/frameset.htm
The below link shows how to specify the database vendor and datasource
http://help.sap.com/saphelp_nw04s/helpdata/en/e1/67fc3ee241ba28e10000000a114084/frameset.htm
Hope you are able to solve the problem.
Do let us know if you come up with the solution.
Regards,
Harish
Message was edited by: HARISH SUBRAMANIAN

How to make the Reference field in the in Accounting Tab a required field.

Hi,
Can i make the REference field in the Accounting tab required. I want to enter contract number from RE in that field.
Thank you.
Rachelle

Hi,
Goto t.code OVA2 select A-sales header and then click on procedures in the left--> select the procedure in which you want to incolude this field and new entries the table name is VBAK and field is XBLNR for the reference field in the accouting tab and accordingly assign the status 01 or 02 as per your requirement.
Then you need to assign the incompletion procedure to the sales document type in VOV8.
Regards,
Gopal.

Change the position of the text field in the report region

Hi,
I am having a report region in whch there are 2 buttons which are in the Region Template position #Create# and a
text field. I added a text field in the same region. I tried to change the position of the text field near the buttons. I
tried to change "label-Horizontal/vertical alignment" and "Element horizontal vertical alignment". But the postion of the
text field is not changing. Plz help,
Thanks,
TJ

Hi Andy,
Sorry to ask this questions.
1.Where exactly i need to change the HTML code(By uisng the view source?)
2.My taskname part html code when viewing the source is given below
tabindex="999"><img src="/i/e.gif" alt="Edit" class="eLink" />
</a><tr></td><td nowrap align="left">
<label for="P1_TASK_NAME" tabindex="999">
<a class="t16OptionalLabelwithHelp" href="javascript:popupFieldHelp('5853137628393530415','676839962625525')"
tabindex="999">Task Name</a></label></td>
<td colspan="1" rowspan="1" align="left" valign="top"><input type="hidden" name="p_arg_names"
value="5853137628393530415" /><input type="text" name="p_t06" size="10" maxlength="20" value=""
id="P1_TASK_NAME" /><a class="eLink" title="Edit" href="javascript:popupURL('f?
p=4000:371:676839962625525::::P371_ID,FB_FLOW_ID,FB_FLOW_PAGE_ID:5853137628393530415,107,1');"
tabindex="999"><img src="/i/e.gif" alt="Edit" class="eLink" /></a></td></table>
<table summary="" cellspacing="0" cellpadding="0" border="0" width="100%"><tr><td align="right"><table
cellpadding="0" cellspacing="0" border="0" summary="" class="t16Button">please suggest what changes i need in this code to change the alignment of the task_name text field,
Thanks,
TJ

Editing the conversion field in the sales order

Can any one tell me how to use the user exit USEREXIT_FIELD_MODIFICATION in order to make the conversion field in the sales order enabled so that i can edit it in the sales order
Regards,
SD Consultant

Hi Serry,
As per my understanding you are talking about currency conversation in sales order which is in grayed out at sale header level,the values are coming from VBKD - KURSK so through the user exit ask your abaper make that filed in editable mode.
Regars
Ram

User based block the pricing field in the sale order

HI FRIEND
We have requirement user based block the pricing field in the sale order
pls suggest me the configuration steps
with regards
dinesh

hi friend
when create a sale orde,r price and exchange rate is triigger from the master record.
head department want not require to End user to change the price in the sale order .
so head department only have authorisation to change price.
selected user is not allow the change the price.
so i need the configuration
with regards
dinesh

I have lost the address field on the safari page

I have lost the address field from the safari header. How do I restore this?

I finallyfigured this one out. I couldn't get the customize screen to do anything until I tried to drag nothing. It worked. My first Mac was a SE and I thought I was pretty good on Macthink, but an additional direction would have helped immensly.

Add the country field in the main details tab of the CRMD_BUS2000126

Hi Experts,
I have the following business scenario : Need to display the country field in the Details tab of the PCUI activity application which normally appears under the Location tab of the application.
This is what I have done uptil now:
1) Added the country field in the screenstructure CRMT_BSP_ACT_DETAILS
2) Added the field in the field group ACT_OVERVIEW
3) Regenerated the field group
Problem is that the field still does not show under the details tab.
For your information :
   1) All the tabs including the Location tab ( only excluding the Details tab ) have been hidden from display.
   2) In the debug mode , I could see that the READ method of the class CL_CRM_BSP_IL gets the screenstructure CRMT_BSP_ACT_DETAILS with the country field added correctly , so I guess this is not a interaction layer / application issue. But after that the field gets lost in the framework layer.
Any expert suggesion for the steps as well as the likely solution is appreciated.
Thanks,
Sudipta

Hi Sudipa,
       As you said that in Devbug you can see that filed is added to your structure perfectly bit its not visible on your screen !!! Correct !!!!
        For this 1st check for standard screen varint is set for that screen or not.
    and try to tick ur new filed as visible in STD screen varints for that screen..
i am sure that it will get done after using varint.
Regards,
Amol Tambe
SAP CRM Technical Consultant.

How to add the date field in the dso and info cube

Hi all.
I am new to bi 7. in the earlier version v hav to button to add the date field. but in the bi 7 der is no option so can any body tell me how to add the date field in the data targets
Thanks & Regard
KK

my prob is solved
KK

How to use the separate symbol in the text field in the adobe form.

Hi,experts,
I dont know how to use the separate symbol to make a paragraph separate into several lines correctly in the text field in the adobe form.
Action:
1. config the ADS successfully.
2. create the adobe form with a mult-line textfield(binding the 'remark' context in the interface of the form) using sfp.
3. create a WDA for invoke the form and transfer the 'remark' context data.
I use the following codes to display the paragraph in the PDF document:
CONCATENATE
'1、aaaaaaaaaaa；'
'2、bbbbbbbbb '
'3、ccccccccccc'
'4、ddddddddd'
INTO remark .
lo_nd_z_hr_php_payslip->set_attribute(
EXPORTING
name = `REMARK`
value = remark ).
But I found all the content aren't paragraph separate correctly in the text field in the adobe form when I run the WDA.
Could you please give me some hints to make the paragraph separate correctly in PDF document? Thanks a lot in advance!
My email is : [email protected]
Best regards,
Tao
Edited by: wang tao on Apr 8, 2008 1:58 AM

Hi,
If it is just a one word value then you could use this in the exist event;
this.rawValue
= util.printx(">?<*",this.rawValue);
This changes the first character (represented by the ?) to uppercase (represented by the >) and all trailing characters (represented by the *) to lowercase (represented by the <).
If you wanted something more general ... if they could also enter a middle name then you could call a function like;
function toTitleCase(textValue)
return textValue.toLowerCase().replace(/\b[a-z]/g, function replacer(match) { return match.toUpperCase(); });
This uses a regex to change all lowercase letters following a word boundary to uppercase.
Bruce

Problem having the cloumn fields in the heading(REP:1317)

Similar Messages

Maybe you are looking for