Problem Icloud with Windows Vista

Hello I'm french and my english is not perfect.
I try to explain to you what is my problem.
When I want to connect with my ID Apple, I can read this message " You can't to connect you because there is an error of server"
Thanks
When I launch Icloud on my PC

Hi, I have the same problem. Has anyone come forward with any advice on fixing the problem?

Similar Messages

  • Problem Installing with Windows Vista

    I have windows Vista and I am trying to install flash player i go to save it then run it and i get a message saying only a single instance of this application can run. I have tried the offline version i have tried to delete all the folders that go with flash player and i still can not get flash player to load on to my computer. is there anyone that could help me out please

    I branched this into it's own thread.
    I you haven't rebooted yet, reboot your machine and immediately run the installer that you downloaded.  That should solve any issue with an active process keeping Flash Player busy.

  • Problems downloading with Windows Vista

    I get this message when i try to use iTunes. What the heck do I do?
    This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows installer package.

    Hi.
    This forum is for troubleshooting compatibility issues between Macs and Windows, not iTunes or iPods.
    You should probably post your question in iTunes or iPod discussions:
    http://discussions.apple.com/category.jspa?categoryID=150
    http://discussions.apple.com/category.jspa?categoryID=146

  • HT1349 I have icloud on my pc with windows vista.  Recently, upon startup I receive an error that says applephotostream.exe has stopped working.  Windows will close this problem . . . any suggestions.  I tried to download the control panel again. no luck

    I have icloud on my pc with windows vista.  recently, upon startup I get a message that says applephotostream.exe has stopped working.  Windows will close this program  . . . I tried re-installing the icloud control panel, etc.  to no avail.  any leads?

    Hi, I have the same problem. Has anyone come forward with any advice on fixing the problem?

  • Problems dual booting Windows Vista with Oracle Enterprise Linux 4

    I tried dual booting my sony laptop which came pre installed with windows Vista,After a successful installation,windows Vista boots fine,but Oracle enterprise linux just stops booting at this point " Starting Udev...................................................(OK)
    Initializing hardware....Storage network"
    It's posibly a hardware compatibility problem but I dont know why I get stuck at this point.Can anyone help please?

    hi,
    r u getting this error while installing oel or after installation?
    which version of oel u r installing?
    u may get this error probably due to hard disk (usually sata) compatility with linux.
    --Regards
    Xaheer

  • I have downloaded the new iTunes 10.7 on my computer with windows vista on it. Now every time I try to run a video it shuts off iTunes. Is anyone else having this problem?

    I have downloaded the new iTunes 10.7 on my computer with windows vista on it. Now every time I try to run a video it shuts off iTunes. Is anyone else having this problem? I have uninstalled and reinstalled the program twice. Is there a fix? Is it possible I am missing part of the program? 

    I'd start with the following user tip:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • Itunes problem with windows Vista

    ok i bought my touchsmart tx2 1025 with windows vista ultimate 64 bit and well i ve noticed that ..well since this is my third time i exchange this computer and i noticed there was a problem with the speakers when i was playing music that anytime during a song i would get this distorted sound like when u put a lot of volume in ipod headphones that it sounds like a crack. Well that happened in my computer even with low volumes.
    However I played two times the same song on itunes and two times on windows media player.
    Every single time on itunes the sound came as if the speakers were about to blow... like a crack..
    Every single time on Windows media player it never sounded like that.
    So i am pretty sure its an itunes problem. Does anyone know how to fix this.. i would rather use itunes than windows media player but i really hate the sound it makes sometimes because it shows about 2 to 3 times during one song.

    It's possible that the song your playing does indeed have a little audio distortion in it, some media players are capable of filtering it out in a silent way, others play a beep, hence with one song I have, if i play it in windows media player it goes on and then for a split second theres a beep, iTunes doesent seem to do it, so instead of filtering out the missing data, it plays it.
    This is more likley a problem with the song than iTunes

  • Why won't icloud work with windows vista anymore?

    why won't icloud work with windows vista anymore?

    I had to re-install after the newly released iTunes - for Vista it does work with iClud 2 - not 3. You can download from this site.

  • ¿Problems with Windows Vista or Sony Vaio?

    Hello everyone
    I have a Cisco 2100 WLC with two Access Points 1130, with two WLAN networks, one with WPA2 and the other with Web-Authentication. The two networks works correctly, but I have a client, a Sony Vaio with Windows Vista, which usually give  problems, disconnects, and when you try to reconnect, you can not.
    When  this happens, in the WLC appears the error "Decrypt errors Occurred for client xx:xx:xx:xx:xx:xx using WPA2 key on 802.11b / g interface of AP xx:xx:xx:xx:xx:xx" .
    Sometimes several times to restart the laptop, reconnect. The network card is an Intel 5100, anyone know if there is any inconsistency between this card and Cisco AP? Or is it a matter of O.S.?
    I have no other Windows Vista client to verify, the other clients are Windows XP and 7. I have tried reinstalling different drivers on the laptop and not the solution.
    Thanks

    Hi Carlos,
    Make sure that:
    1. you are running latest driver from intel on your laptop
    2. use only AES encryption with WPA2. If TKIP is also selected. Uncheck it and leave only AES.
    Cheers
    Serge

  • Flash player 11.0.1.152 installation problem with Windows Vista 64-Bit

    Hello,
    I just can't get Flash Player to install on my computer with Windows Vista 64-Bit - doesnt matter if I try with Firefox, Opera or IE (I usually use Firefox).
    The download isn't a problem, but when I start the downloaded .exe, this file just disappears from my download folder and nothing happens - besides starting a process called install_flashplayer11x32_mssd_aih_3.exe, which does nothing. The usual installation popup never appears. After that I can't try starting the installation again, until disabling the process via task manager ("Only a single instance of this application may run"). Doesn't matter if I try the download and installation with or without "McAffe Security Plus" btw - same result.
    I never had such a problem before - Flash Player 10.3 was and is no problem to install and use.
    I have tried all the measures suggested in the troubleshooting section on the official site, including the advanced troubleshooting measures (uninstall old version, run as administrator, disabling software firewalls, disabling virus scanner etc.). Nothing helps.
    I don't got those problems with my laptop running Windows 7 - just my desktop computer with Vista 64-Bit.
    Any help would be greatly appreciated.

    Try using the installers from the links in http://forums.adobe.com/thread/909550
    P.S. topic moved to the Installation section of the forum.

  • Previewing web page problems with Windows Vista

    Just wonderering if there is anyone who can solve a problem I
    have with Windows Vista, It wont let me preview my pages being made
    in Dreamweaver...I get a pop with a navcancl message...
    Can you help please as I am seriously thinking of going back
    to Windows XP...
    Creative

    No, but really - what's the message? I'm developing under
    Windows Vista and
    DW CS3 and never had an errors with previewing.
    Shane H
    [email protected]
    http://www.avenuedesigners.com
    =============================================
    Blog:
    http://avenuedesigners.com/blog/
    Web dev articles, photography, and more:
    http://sourtea.com
    =============================================
    Proud GAWDS member
    http://www.gawds.org/showmember.php?memberid=1495
    Delivering accessible websites to all ...
    =============================================
    "Shane H" <[email protected]> wrote in
    message
    news:f3tcg3$mvk$[email protected]..
    > Yeah, all the errors drove me nuts. I'm all the way back
    to developing on
    > Windows 3.1, now.
    >
    > --
    > Shane H
    > [email protected]
    >
    http://www.avenuedesigners.com
    >
    > =============================================
    > Blog:
    >
    http://avenuedesigners.com/blog/
    >
    > Web dev articles, photography, and more:
    >
    http://sourtea.com
    > =============================================
    > Proud GAWDS member
    >
    http://www.gawds.org/showmember.php?memberid=1495
    >
    > Delivering accessible websites to all ...
    > =============================================
    >
    > "htmlgirl" <[email protected]> wrote in
    message
    > news:f3ssbi$5va$[email protected]..
    >> Just wonderering if there is anyone who can solve a
    problem I have with
    >> Windows
    >> Vista, It wont let me preview my pages being made in
    Dreamweaver...I get
    >> a pop
    >> with a navcancl message...
    >>
    >> Can you help please as I am seriously thinking of
    going back to Windows
    >> XP...
    >>
    >> Creative
    >>
    >

  • Problems with Windows VISTA and WPA-2

    Hi Guys,
    I am using a Linksys router supporting draft-N; it seems that after some time of usage; Windows Vista stop being able to connect to Linksys using a WPA-2 PSK.
    Everytime you search for the SSID and attempt to connect, the ''network is taking too long to connect''' and Windows always informs the user that ''limited or no connectivity'' even though the signal strength is excellent.
    Is that a common problem in Windows Visa (I am using Home Edition)?

    Yes thats the basica command problem with Windows Vista while connecting to the Wireless Network.... In this you can need to update your Windows Vista OS with all the Latest Patches and the Service Pack to improve more stability on your Vista Computer to get connected to the Wireless Network..

  • Problems with Windows Vista for BPC, from Windows XP

    Hello,
    We have developed some templates in excel 2003 in SAP BPC for Windows XP and these work perfectly. But this templates in excel 2003 and with Windows VISTA makes a fault.
    The fault is: when the template is opened and you select a year (made with a EVCVW), the box for choose the year opens correctly, then you click OK,and the Excel makes a fault and close itself.
    How could i solve this problem?
    Thank you for the help.
    With best wishes

    Hello
    In this case open and check the MS Windows Application and System logs and foward to your MS Windows support channel to debug.
    Regards.

  • SAP problem with Windows Vista

    I have purchased a Laptop with Windows Vista OS having Internet explorer 7.0 and loaded SAP GUI 6.40 with patch 20. I am facing the following problems:
    1. Not able to execute CJ20N transaction
    2. Heirarchy reports are not showing column descriptions
    3. Some standard reports are not able to be executed
    4. Not able to get connected to my client thru Cisco VPN
    5. Not able to reply in webmails
    Also some times my system is taking lot of time to execute simple commands and shutdown.
    Can anybody help me how to resolve these?
    Thanks
    Raghu

    try this link:
    https://smpdl.sap-ag.de/~swdc/012002523100000896772007E/50083078_4.ZIP?_ACTION=DL_DIRECT
    if this does not work, try at http://www.sapsuperusers.com/forums/showthread.php?t=6088 but you will need to register on that website first.

  • I have a problem with the iTunes Store, I have an ipod and an iphone 2. I have a PC with Windows Vista Home Premium 2007, entering into iTunes Store on the main screen I get only AppStore, Podcast and iTunesI have a problem with the iTunes Store, I have a

    I have a problem with the iTunes Store, I have an ipod and an iphone 2. I have a PC with Windows Vista Home Premium 2007, entering into iTunes Store on the main screen I get only AppStore, Podcast and iTunes U. In my screen I get only ipad2 Podcast, iTunes U Downloads. My problem is I can not access any application to download music, videos, books, etc..
    ITunes will be installed wrong or what should I do to activate these options?

    Go to the front page of the Store, and click Change Country.  Make sure it is set to the country where you actually are. 
    Then you will be able to see everything that is for sale in your country, which, depending where you live, might or might not include music.

Maybe you are looking for

  • "Save" as a template greyed out

    Hello - i am a very basic user - am trying to save a template of a Clock for future episodes of our show. I select "save as template" and the save window appears, with and I can name it but the save button is greyed out.. Also the collections are gre

  • Java Script (Help Required)

    We are using the following code in HTML Header of the page //replaces the enter key with the tab key document.onkeydown = function () if (event.keyCode == 13) event.keyCode=9; </script> We want to execute this code when current Item is not :P3_REMARK

  • UJS_ACTIVATE_CONTENT crashes on Laod Data into Appset step. BPC57NWSP2.

    I had some problems using  UJS_ACTIVATE_CONTENT. Maybe you or someone else working on BPC can help me. <br> I am testing BPC75NW SP2 on a clean SAP NW 7.01.<br> My server has only the ABAP AS <br> <br> <br>I upgraded all software components to SP6 <b

  • Select-option at Input

    Dear Experts, I have been trying to find to input the range of values,like we do in ABAP as select options,though i am able to use inputField but i want to select the range of values for a particular field... Pls help me out... Thanks, Saurabh

  • Download free version of oracle

    how can i donwload a free version of Oracle database as i want to practice sql at home where can i donwload and how to use it?