Problem im HTMLDB service...URGENT

Good Afternoon, the following error occurred me when i tried to initiate HTMLDB service. "The OracleOraDb10g_HTMLDBProcessManager service on Local Computer started and then stopped. Some services stop automatically if they have no work to do, for example, the Perfomance Logs and Alerts service"... What it will have happened? as I will be able to decide this problem. I am thankful who can help me.

Do you have the right forum - there is no OracleOraDb10g_HTMLDBProcessManager service in the XE stack. Maybe you want to post on the Application Express forum - Oracle Application Express (APEX) ? (I see that you already have)

Similar Messages

Infospoke problem - opeb hub service - urgent

hello friends,
I am trying to run one infospoke but getting the below error.
*The 3rd party status for request ATTRIBUTE_MSGV3 has not yet been set*
I have checked all the source and traget structures , which are active .
The source system connection is also OK.
RFC is also OK .
Could you please let me know , how to solve this problem , it is quite urgent .
Thanks

refer:
http://help.sap.com/saphelp_nw04s/helpdata/en/a8/a6eae34c9e9b4cbd8fbc7acd2845d0/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5f12a03d-0401-0010-d9a7-a55552cbe9da

Problem in JAXRPC Webservice - Urgent

This is Santhakumar.
I have developed and deployed a JAXRPC webservice in Tomcat5.0 with JWSDP1.5.
WSDL is created and it works fine for normal java remote methods.
But when I write a code for to connect a live server ( EPP-Extensible Provisioning Protocol TCP server ), I could not invoke the service.
I get the following error:
================================================================
C:\examples\jaxrpc\dynamicproxy>ant run
Buildfile: build.xml
run-client:
[java] UrlString = http://localhost:8080/domain-jaxrpc/domain?WSDL
[java] java.rmi.ServerException: JAXRPCSERVLET28: Missing port information
[java] at com.sun.xml.rpc.client.StreamingSender._raiseFault(StreamingS
ender.java:497)
[java] at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.
java:294)
[java] at com.sun.xml.rpc.client.dii.CallInvokerImpl.doInvoke(CallInvok
erImpl.java:79)
[java] at com.sun.xml.rpc.client.dii.BasicCall.invoke(BasicCall.java:48
2)
[java] at com.sun.xml.rpc.client.dii.CallInvocationHandler.doCall(CallI
nvocationHandler.java:121)
[java] at com.sun.xml.rpc.client.dii.CallInvocationHandler.invoke(CallI
nvocationHandler.java:85)
[java] at $Proxy0.domainCheck(Unknown Source)
[java] at dynamicproxy.DomainClient.main(Unknown Source)
run:
BUILD SUCCESSFUL
Total time: 3 seconds
C:\examples\jaxrpc\dynamicproxy>
===========================================================================
I tried in many ways to resolve it.But still I could not find out any solutions.
Is there any security settings to be handled for that?
The method works fine and the server is connected when I execute it from the normal java class in command prompt.
But when implementing that method in JAXRPC webservice only I found this problem.
Please share your ideas with me to resolve this problem.I am at urgent.
Thanks in advance.
Santhakumar.
The sample example site used is:
http://www.cis.umassd.edu/~hxu/Projects/UMD/WebServices/

Please check the OSS note - 1041204 - Controlling COMMIT WORK in production order BAPIs
Hope this helps you.

Problems with Target service agreement

Problems with Target service agreement to repair my ipod nano. I have gone to the BBB. Who can I contact at Apple to let them know the poor service that Target gave with a Apple product?

Apple Customer Relations (800) 767-2775

Problem while testing a BAPI Web Servicei face this problem in web service

i face this problem in web service bapi when i am carrying out the submit test... so can anyone help me???
HTTP/1.1 500 Internal Server Error
Set-Cookie: <value is hidden>
content-type: text/xml; charset=utf-8
content-length: 803
sap-srt_id: 20080610/144609/v1.00_final_6.40/DD36B8E7DE44B5F19BA900145E6770F3
server: SAP Web Application Server (1.0;700)
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/"><soap-env:Body><soap-env:Fault><faultcode>soap-env:Client</faultcode><faultstring xml:lang="en">Deserialisation failed</faultstring><detail><n0:SimpleTransformationFault xmlns:n0="http://www.sap.com/transformation-templates"><MainName>/1BCDWB/WSS0080610064309718000</MainName><ProgName>/1BCDWB/WSS0080610064309718000</ProgName><Line>128 </Line><Valid>X</Valid><ReferenceFault><DescriptionText>Error accessing the ref. node 'EMPLOYEENUMBER'</DescriptionText><RefName>EMPLOYEENUMBER</RefName></ReferenceFault><Caller><Class>CL_SRG_RFC_PROXY_CONTEXT</Class><Method>IF_SXML_PART~DECODE</Method><Positions>1 </Positions></Caller></n0:SimpleTransformationFault></detail></soap-env:Fault></soap-env:Body></soap-env:Envelope>

Hi,
since I did not find that BAPI in my system: what is the exact name?
Did you test the BAPI directly in ABAP, i.e. function builder SE37, successfully?
Currently it looks to me as if you did not provide sufficient business data.
Did you specify the employee number before executing the call?

Problem in Creating Service contract Quote

Hi,
I have a problem while creating Service Contract Quote. The Problem is "No Items being created in Service Contract Quote."
I am copying these line items from the Package Quote(Programatically). I am reading the Package Quote Lines Items using CRM_ORDER_READ and I am looping these one by one, and copying into one Item Table. Passed this table, to MAINTAIN_ORDERADM_I function module. And Then I am calling SAVE function module.
But, for me service contract Quote is being created with no line items.
Can you please let me know, how can I solve this problem.
And let me know what are the necessary steps to be taken progrmtically, for creating Service Contract Quote from a Package Quote.
Thanks,
Sandeep

A standard way of doing this would be to create an action in service contract with method call processing type, and method COPY_DOCUMENT. For this you need to do the following:
1) Create a new action called "SRV_CNTRCT_QUOTE_CREATE" in action pofile already attached to Package Quote. Use
CRMC_ACTION_DEF Tcode for this.
2) Choose processing type as method call and method as COPY_DOCUMENT.
3) Choose parameter CRMD_ORDERADM_H, PROCESS_TYPE with initial value as transaction type of Serv Contract Quote.
4) Institute start and scheduled conditions if required in CRMC_ACTION_CONF.
Note: For this copying controls at transaction level, item category level and itemcat determination while copying should have been determined.
Regds,
Raghu

Problem removing Listener Service in Clusterware 11g

It appears that I already have a listener service as shown below, and I am having problem removing this service so that I can create another. I know that I can just add a new listener service for each node, though if anyone would share some insight on how I can remove this listener service ofr Oracle 11g Clusterware with two node cluster, I would appreciate your insight. Thanks
rac1.respecti.com>./crs_resources.sh
HA Resource Target State
ora.rac1.gsd ONLINE ONLINE on rac1
ora.rac1.ons ONLINE ONLINE on rac1
ora.rac1.rac1.lsnr ONLINE ONLINE on rac1
ora.rac1.vip ONLINE ONLINE on rac1
ora.rac2.gsd ONLINE ONLINE on rac2
ora.rac2.ons ONLINE ONLINE on rac2
ora.rac2.rac2.lsnr ONLINE ONLINE on rac2
ora.rac2.vip ONLINE ONLINE on rac2
rac1.respecti.com>srvctl remove listener -n rac1 -l rac1
PRKO-2203 : Listener is running on node: rac1
rac1.respecti.com>srvctl stop listener -n rac1
CRS-0210: Could not find resource 'ora.rac1.LISTENER_RAC1.lsnr'.
rac1.respecti.com>

Hi, Is there any tnslsnr process running on the node. To understand the problem better, enable the debug trace for the .lsnr resource. You can enable trace by executing the following command as root.
crsctl debug log res "ora.rac1.LISTENER_RAC1.lsnr:5"
crsctl debug log crs "CRSRTI:1,CRSCOMM:2,OCRSRV:4"
Try to stop the listener.
Examine the log files under CRS_HOME/log/$HOST/crsd/* and CRS_HOME/log/$HOST/racg/*
Thanks & Regards
-Harish Kalra

Facing problems in ITS service PZ80

Hi All,
I am facing problems in ITS service PZ80.When i execute PZ80 in transaction SE93, it is showing the layout perfectly. But when i create the same service PZ80 in SE80, the layout is somewhat distorted..ie scroll bar and a few buttons are not in place. Do i need to make some changes in Parameters value?If so, can anyone please tell me how to go about it?
Thanks,
Aditi.

Hi Aditi,
Check the theme you are using. It can be 99 or 2002.
I think based on the theme the layout changes.
Regards
Arun

There was a problem inserting the Service Request: null

I am trying out service desk. When I try to create a request I get:
There was a problem inserting the Service Request: null
I can't see what the issues is. All fields marked in red are filled.
Tom

Thomas,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

I am using Apple iphone 3gs and having a problem of no services after inserting sim card

I am using Apple iphone 3gs and having a problem of no services after inserting sim card, how to resolve it?

Follow this article below it will tell you step by step what to do.
http://support.apple.com/kb/ts4429
If you're still experiencing No Service, contact your carrier to check for any network or account issues that could cause these problem.

Problem while Creating Service order through Work Order

Hi Gurus,
I have a problem While creating Service order (me21n) through - Work order it contains service requisitions.
So that means they carry information such as G/L and work order number while entering the requistion no in PO Creation Screen (me21n) which automatically should be picked from the work order refference.
But problem here is the service items and all other are assigned to PO except the Account Assingnment tab which is GL Account and Work Order No and Cost center..
Can anyone explain me this?
Is this something that one can explain?
Regards,
Murugesh R
Rewards for value replies.

Closed..

Problem while creating Service order

Hi Gurus,
I have a problem While creating Service order (me21n) through - Work order it contains service requisitions.
So that means they carry information such as G/L and work order number while entering the requistion no in PO Creation Screen (me21n) which automatically should be picked from the work order refference.
But problem here is the service items and all other are assigned to PO except the Account Assingnment tab which is GL Account and Work Order No and Cost center..
Can anyone explain me this?
Is this something that one can explain?
Regards,
Murugesh R
Rewards for value replies.

Hi Murgesh,
If GL code is not getting bydefault from the system it is needed to be provided by the user.
If normally one GL is there or other than master data services if single GL is there u can set that in SPRO.
it is avalible in deafult settings in order node
If you are creating the order with refrence to PR then it will take account assignement as "F" system will pick up all the details from PM module. This is the integration of MM & PM module.
But if your PO is not w.r.t. PM orders PR then needs to be given manully.
Ramesh
Edited by: RameshChandra Soni on Jul 25, 2008 8:16 AM

I bought a iphone 3gs 4 months ago had a problem with display service centre replaced me with the phone when i checked the settings of the phone in cellular usage under call time the lifetime usage was 3 days and 18 hours.what sholud be done ?

i bought a iphone 3gs 4 months ago had a problem with display service centre replaced me with the phone when i checked the settings of the phone in cellular usage under call time the lifetime usage was 3 days and 18 hours.what sholud be done ?

How is your iPhone's display different?
You can check the model number by going to Settings/General/About. These are the model numbers for the various 3 GS models;
MB715LL/A (16 GB Black), MB716LL/A (16 GB White), MB717LL/A (32 GB Black), MB718LL/A (32 GB White), MC555LL/A (8GB)

Problem on htmldb 1.6.1.00.03 - not present in 1.6.0.0.87

I really need help.
I have an application running for a year in which many reports and SVG graphs are based on queries in the form as you can see below.
On my linux oracle 10.1.0.3 and htmldb1.6.0.0.87 all is ok and month show ordered correctly Jan, Feb, Mar, etc
When I installed a windows machine on Oracle10g 10.2.0.1.0 and HTMLDB 1.6.1.00.03
All reports and graphs give me Jan, Apr, Jul, Feb, ...
Running the query in SQLWORKSHOP shows correct data with month ordered, in run-time it does not.
I can solve the problem in a report by forcing a "order by b.month" but in clustered and line charts done in SVG if i add an order by clause to all series at run-time I get an error "sql statement not terminated ..." the view source shows a union of all my series with order by which doesnt even run in sqlworkshop.
The question is what has changed in this version of htmldb to cause this ordering problem.
QUERY EXAMPLE:
SELECT
TO_CHAR(TO_DATE(b.month,'MM'),'Mon') YMonth,
0 -- replaced o for real query for you to test
) pipeline_value
FROM (SELECT month
FROM
(select level month
from dual
connect by level <= 12)
) b
group by b.month

Hi Scott,
I tried to reproduce problem on htmldb.oracle.com and it worked fine I could not reproduce problem. I then did some further testing and discovered the following:
My problem is shown not dependant of HTMLDB versions but Oracle versions:
My new machine I installed Oracle 10GR2 10.2.0.1.0 in SQLPLUS I see the problem so it has nothing to do with HTMLDB. In htmldb.oracle.com a did a select * from v$version and the version is 10.1.0.4.0.
My conclusion is the following query has diferent behaviour in oracle db 10.2.0.1.0 compared to all earlier versions. Earlier versions show months ordered in new version months are not shown in order.
SELECT TO_CHAR(TO_DATE(b.month,'MM'),'Mon') YMonth
FROM
(SELECT month FROM (select level month from dual connect by level <=12)) b
group by b.month
This causes lots of errors in SVG graphs. If I remove the group by in this select the problem does not show but in the final solution I cannot remove it(this is just a simplification to show the error)
If you have access to a DB 10.2.0.1.0 try this is sqlplus and compare it with a run in SQLWORKSHOP of the htmldb.oracle.com.
Thanks
Carlos Santos

HT204053 Hi all, I am constantly running into problems opening iCloud services (mail, calendars, iWork's, etc.). I get a message stating i.e. Can't load Mail (Calendar, iWork), There was a problem loading the application. Does anybody know what a heck is

Hi all, I am constantly running into problems opening iCloud services (mail, calendars, iWork's, etc.). I get a message stating i.e. Can't load Mail (Calendar, iWork), There was a problem loading the application. Does anybody know what a heck is going on?

I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport

Problem im HTMLDB service...URGENT

Similar Messages

Maybe you are looking for